Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 304 insertions, 0 deletions

diff --git a/Documentation/ABI/stable/sysfs-driver-dma-idxd b/Documentation/ABI/stable/sysfs-driver-dma-idxd
new file mode 100644
index 000000000..3becc9a82
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-dma-idxd
@@ -0,0 +1,304 @@
+What:		/sys/bus/dsa/devices/dsa<m>/version
+Date:		Apr 15, 2020
+KernelVersion:	5.8.0
+Contact:	dmaengine@vger.kernel.org
+Description:	The hardware version number.
+
+What:           /sys/bus/dsa/devices/dsa<m>/cdev_major
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:	The major number that the character device driver assigned to
+		this device.
+
+What:           /sys/bus/dsa/devices/dsa<m>/errors
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The error information for this device.
+
+What:           /sys/bus/dsa/devices/dsa<m>/max_batch_size
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The largest number of work descriptors in a batch.
+                It's not visible when the device does not support batch.
+
+What:           /sys/bus/dsa/devices/dsa<m>/max_work_queues_size
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The maximum work queue size supported by this device.
+
+What:           /sys/bus/dsa/devices/dsa<m>/max_engines
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The maximum number of engines supported by this device.
+
+What:           /sys/bus/dsa/devices/dsa<m>/max_groups
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The maximum number of groups can be created under this device.
+
+What:           /sys/bus/dsa/devices/dsa<m>/max_read_buffers
+Date:           Dec 10, 2021
+KernelVersion:  5.17.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The total number of read buffers supported by this device.
+		The read buffers represent resources within the DSA
+		implementation, and these resources are allocated by engines to
+		support operations. See DSA spec v1.2 9.2.4 Total Read Buffers.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
+
+What:           /sys/bus/dsa/devices/dsa<m>/max_transfer_size
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The number of bytes to be read from the source address to
+		perform the operation. The maximum transfer size is dependent on
+		the workqueue the descriptor was submitted to.
+
+What:           /sys/bus/dsa/devices/dsa<m>/max_work_queues
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The maximum work queue number that this device supports.
+
+What:           /sys/bus/dsa/devices/dsa<m>/numa_node
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The numa node number for this device.
+
+What:           /sys/bus/dsa/devices/dsa<m>/op_cap
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The operation capability bit mask specify the operation types
+		supported by the this device.
+
+What:		/sys/bus/dsa/devices/dsa<m>/pasid_enabled
+Date:		Oct 27, 2020
+KernelVersion:	5.11.0
+Contact:	dmaengine@vger.kernel.org
+Description:	To indicate if PASID (process address space identifier) is
+		enabled or not for this device.
+
+What:           /sys/bus/dsa/devices/dsa<m>/state
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The state information of this device. It can be either enabled
+		or disabled.
+
+What:           /sys/bus/dsa/devices/dsa<m>/group<m>.<n>
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The assigned group under this device.
+
+What:           /sys/bus/dsa/devices/dsa<m>/engine<m>.<n>
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The assigned engine under this device.
+
+What:           /sys/bus/dsa/devices/dsa<m>/wq<m>.<n>
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The assigned work queue under this device.
+
+What:           /sys/bus/dsa/devices/dsa<m>/configurable
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    To indicate if this device is configurable or not.
+
+What:           /sys/bus/dsa/devices/dsa<m>/read_buffer_limit
+Date:           Dec 10, 2021
+KernelVersion:  5.17.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The maximum number of read buffers that may be in use at
+		one time by operations that access low bandwidth memory in the
+		device. See DSA spec v1.2 9.2.8 GENCFG on Global Read Buffer Limit.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
+
+What:		/sys/bus/dsa/devices/dsa<m>/cmd_status
+Date:		Aug 28, 2020
+KernelVersion:	5.10.0
+Contact:	dmaengine@vger.kernel.org
+Description:	The last executed device administrative command's status/error.
+		Also last configuration error overloaded.
+		Writing to it will clear the status.
+
+What:		/sys/bus/dsa/devices/wq<m>.<n>/block_on_fault
+Date:		Oct 27, 2020
+KernelVersion:	5.11.0
+Contact:	dmaengine@vger.kernel.org
+Description:	To indicate block on fault is allowed or not for the work queue
+		to support on demand paging.
+
+What:           /sys/bus/dsa/devices/wq<m>.<n>/group_id
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The group id that this work queue belongs to.
+
+What:           /sys/bus/dsa/devices/wq<m>.<n>/size
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The work queue size for this work queue.
+
+What:           /sys/bus/dsa/devices/wq<m>.<n>/type
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The type of this work queue, it can be "kernel" type for work
+		queue usages in the kernel space or "user" type for work queue
+		usages by applications in user space.
+
+What:           /sys/bus/dsa/devices/wq<m>.<n>/cdev_minor
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The minor number assigned to this work queue by the character
+		device driver.
+
+What:           /sys/bus/dsa/devices/wq<m>.<n>/mode
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The work queue mode type for this work queue.
+
+What:           /sys/bus/dsa/devices/wq<m>.<n>/priority
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The priority value of this work queue, it is a value relative to
+		other work queue in the same group to control quality of service
+		for dispatching work from multiple workqueues in the same group.
+
+What:           /sys/bus/dsa/devices/wq<m>.<n>/state
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The current state of the work queue.
+
+What:           /sys/bus/dsa/devices/wq<m>.<n>/threshold
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The number of entries in this work queue that may be filled
+		via a limited portal.
+
+What:		/sys/bus/dsa/devices/wq<m>.<n>/max_transfer_size
+Date:		Aug 28, 2020
+KernelVersion:	5.10.0
+Contact:	dmaengine@vger.kernel.org
+Description:	The max transfer sized for this workqueue. Cannot exceed device
+		max transfer size. Configurable parameter.
+
+What:		/sys/bus/dsa/devices/wq<m>.<n>/max_batch_size
+Date:		Aug 28, 2020
+KernelVersion:	5.10.0
+Contact:	dmaengine@vger.kernel.org
+Description:	The max batch size for this workqueue. Cannot exceed device
+		max batch size. Configurable parameter.
+		It's not visible when the device does not support batch.
+
+What:		/sys/bus/dsa/devices/wq<m>.<n>/ats_disable
+Date:		Nov 13, 2020
+KernelVersion:	5.11.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Indicate whether ATS disable is turned on for the workqueue.
+		0 indicates ATS is on, and 1 indicates ATS is off for the workqueue.
+
+What:		/sys/bus/dsa/devices/wq<m>.<n>/occupancy
+Date		May 25, 2021
+KernelVersion:	5.14.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Show the current number of entries in this WQ if WQ Occupancy
+		Support bit WQ capabilities is 1.
+
+What:		/sys/bus/dsa/devices/wq<m>.<n>/enqcmds_retries
+Date		Oct 29, 2021
+KernelVersion:	5.17.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Indicate the number of retires for an enqcmds submission on a sharedwq.
+		A max value to set attribute is capped at 64.
+
+What:		/sys/bus/dsa/devices/wq<m>.<n>/op_config
+Date:		Sept 14, 2022
+KernelVersion:	6.0.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Shows the operation capability bits displayed in bitmap format
+		presented by %*pb printk() output format specifier.
+		The attribute can be configured when the WQ is disabled in
+		order to configure the WQ to accept specific bits that
+		correlates to the operations allowed. It's visible only
+		on platforms that support the capability.
+
+What:           /sys/bus/dsa/devices/engine<m>.<n>/group_id
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The group that this engine belongs to.
+
+What:		/sys/bus/dsa/devices/group<m>.<n>/use_read_buffer_limit
+Date:		Dec 10, 2021
+KernelVersion:	5.17.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Enable the use of global read buffer limit for the group. See DSA
+		spec v1.2 9.2.18 GRPCFG Use Global Read Buffer Limit.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
+
+What:		/sys/bus/dsa/devices/group<m>.<n>/read_buffers_allowed
+Date:		Dec 10, 2021
+KernelVersion:	5.17.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Indicates max number of read buffers that may be in use at one time
+		by all engines in the group. See DSA spec v1.2 9.2.18 GRPCFG Read
+		Buffers Allowed.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
+
+What:		/sys/bus/dsa/devices/group<m>.<n>/read_buffers_reserved
+Date:		Dec 10, 2021
+KernelVersion:	5.17.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Indicates the number of Read Buffers reserved for the use of
+		engines in the group. See DSA spec v1.2 9.2.18 GRPCFG Read Buffers
+		Reserved.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
+
+What:		/sys/bus/dsa/devices/group<m>.<n>/desc_progress_limit
+Date:		Sept 14, 2022
+KernelVersion:	6.0.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Allows control of the number of work descriptors that can be
+		concurrently processed by an engine in the group as a fraction
+		of the Maximum Work Descriptors in Progress value specified in
+		the ENGCAP register. The acceptable values are 0 (default),
+		1 (1/2 of max value), 2 (1/4 of the max value), and 3 (1/8 of
+		the max value). It's visible only on platforms that support
+		the capability.
+
+What:		/sys/bus/dsa/devices/group<m>.<n>/batch_progress_limit
+Date:		Sept 14, 2022
+KernelVersion:	6.0.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Allows control of the number of batch descriptors that can be
+		concurrently processed by an engine in the group as a fraction
+		of the Maximum Batch Descriptors in Progress value specified in
+		the ENGCAP register. The acceptable values are 0 (default),
+		1 (1/2 of max value), 2 (1/4 of the max value), and 3 (1/8 of
+		the max value). It's visible only on platforms that support
+		the capability.