Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 344 insertions, 0 deletions

diff --git a/Documentation/admin-guide/cgroup-v1/memcg_test.rst b/Documentation/admin-guide/cgroup-v1/memcg_test.rst
new file mode 100644
index 000000000..a402359ab
--- /dev/null
+++ b/Documentation/admin-guide/cgroup-v1/memcg_test.rst
@@ -0,0 +1,344 @@
+=====================================================
+Memory Resource Controller(Memcg) Implementation Memo
+=====================================================
+
+Last Updated: 2010/2
+
+Base Kernel Version: based on 2.6.33-rc7-mm(candidate for 34).
+
+Because VM is getting complex (one of reasons is memcg...), memcg's behavior
+is complex. This is a document for memcg's internal behavior.
+Please note that implementation details can be changed.
+
+(*) Topics on API should be in Documentation/admin-guide/cgroup-v1/memory.rst)
+
+0. How to record usage ?
+========================
+
+   2 objects are used.
+
+   page_cgroup ....an object per page.
+
+	Allocated at boot or memory hotplug. Freed at memory hot removal.
+
+   swap_cgroup ... an entry per swp_entry.
+
+	Allocated at swapon(). Freed at swapoff().
+
+   The page_cgroup has USED bit and double count against a page_cgroup never
+   occurs. swap_cgroup is used only when a charged page is swapped-out.
+
+1. Charge
+=========
+
+   a page/swp_entry may be charged (usage += PAGE_SIZE) at
+
+	mem_cgroup_try_charge()
+
+2. Uncharge
+===========
+
+  a page/swp_entry may be uncharged (usage -= PAGE_SIZE) by
+
+	mem_cgroup_uncharge()
+	  Called when a page's refcount goes down to 0.
+
+	mem_cgroup_uncharge_swap()
+	  Called when swp_entry's refcnt goes down to 0. A charge against swap
+	  disappears.
+
+3. charge-commit-cancel
+=======================
+
+	Memcg pages are charged in two steps:
+
+		- mem_cgroup_try_charge()
+		- mem_cgroup_commit_charge() or mem_cgroup_cancel_charge()
+
+	At try_charge(), there are no flags to say "this page is charged".
+	at this point, usage += PAGE_SIZE.
+
+	At commit(), the page is associated with the memcg.
+
+	At cancel(), simply usage -= PAGE_SIZE.
+
+Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
+
+4. Anonymous
+============
+
+	Anonymous page is newly allocated at
+		  - page fault into MAP_ANONYMOUS mapping.
+		  - Copy-On-Write.
+
+	4.1 Swap-in.
+	At swap-in, the page is taken from swap-cache. There are 2 cases.
+
+	(a) If the SwapCache is newly allocated and read, it has no charges.
+	(b) If the SwapCache has been mapped by processes, it has been
+	    charged already.
+
+	4.2 Swap-out.
+	At swap-out, typical state transition is below.
+
+	(a) add to swap cache. (marked as SwapCache)
+	    swp_entry's refcnt += 1.
+	(b) fully unmapped.
+	    swp_entry's refcnt += # of ptes.
+	(c) write back to swap.
+	(d) delete from swap cache. (remove from SwapCache)
+	    swp_entry's refcnt -= 1.
+
+
+	Finally, at task exit,
+	(e) zap_pte() is called and swp_entry's refcnt -=1 -> 0.
+
+5. Page Cache
+=============
+
+	Page Cache is charged at
+	- filemap_add_folio().
+
+	The logic is very clear. (About migration, see below)
+
+	Note:
+	  __remove_from_page_cache() is called by remove_from_page_cache()
+	  and __remove_mapping().
+
+6. Shmem(tmpfs) Page Cache
+===========================
+
+	The best way to understand shmem's page state transition is to read
+	mm/shmem.c.
+
+	But brief explanation of the behavior of memcg around shmem will be
+	helpful to understand the logic.
+
+	Shmem's page (just leaf page, not direct/indirect block) can be on
+
+		- radix-tree of shmem's inode.
+		- SwapCache.
+		- Both on radix-tree and SwapCache. This happens at swap-in
+		  and swap-out,
+
+	It's charged when...
+
+	- A new page is added to shmem's radix-tree.
+	- A swp page is read. (move a charge from swap_cgroup to page_cgroup)
+
+7. Page Migration
+=================
+
+	mem_cgroup_migrate()
+
+8. LRU
+======
+	Each memcg has its own vector of LRUs (inactive anon, active anon,
+	inactive file, active file, unevictable) of pages from each node,
+	each LRU handled under a single lru_lock for that memcg and node.
+
+9. Typical Tests.
+=================
+
+ Tests for racy cases.
+
+9.1 Small limit to memcg.
+-------------------------
+
+	When you do test to do racy case, it's good test to set memcg's limit
+	to be very small rather than GB. Many races found in the test under
+	xKB or xxMB limits.
+
+	(Memory behavior under GB and Memory behavior under MB shows very
+	different situation.)
+
+9.2 Shmem
+---------
+
+	Historically, memcg's shmem handling was poor and we saw some amount
+	of troubles here. This is because shmem is page-cache but can be
+	SwapCache. Test with shmem/tmpfs is always good test.
+
+9.3 Migration
+-------------
+
+	For NUMA, migration is an another special case. To do easy test, cpuset
+	is useful. Following is a sample script to do migration::
+
+		mount -t cgroup -o cpuset none /opt/cpuset
+
+		mkdir /opt/cpuset/01
+		echo 1 > /opt/cpuset/01/cpuset.cpus
+		echo 0 > /opt/cpuset/01/cpuset.mems
+		echo 1 > /opt/cpuset/01/cpuset.memory_migrate
+		mkdir /opt/cpuset/02
+		echo 1 > /opt/cpuset/02/cpuset.cpus
+		echo 1 > /opt/cpuset/02/cpuset.mems
+		echo 1 > /opt/cpuset/02/cpuset.memory_migrate
+
+	In above set, when you moves a task from 01 to 02, page migration to
+	node 0 to node 1 will occur. Following is a script to migrate all
+	under cpuset.::
+
+		--
+		move_task()
+		{
+		for pid in $1
+		do
+			/bin/echo $pid >$2/tasks 2>/dev/null
+			echo -n $pid
+			echo -n " "
+		done
+		echo END
+		}
+
+		G1_TASK=`cat ${G1}/tasks`
+		G2_TASK=`cat ${G2}/tasks`
+		move_task "${G1_TASK}" ${G2} &
+		--
+
+9.4 Memory hotplug
+------------------
+
+	memory hotplug test is one of good test.
+
+	to offline memory, do following::
+
+		# echo offline > /sys/devices/system/memory/memoryXXX/state
+
+	(XXX is the place of memory)
+
+	This is an easy way to test page migration, too.
+
+9.5 nested cgroups
+------------------
+
+	Use tests like the following for testing nested cgroups::
+
+		mkdir /opt/cgroup/01/child_a
+		mkdir /opt/cgroup/01/child_b
+
+		set limit to 01.
+		add limit to 01/child_b
+		run jobs under child_a and child_b
+
+	create/delete following groups at random while jobs are running::
+
+		/opt/cgroup/01/child_a/child_aa
+		/opt/cgroup/01/child_b/child_bb
+		/opt/cgroup/01/child_c
+
+	running new jobs in new group is also good.
+
+9.6 Mount with other subsystems
+-------------------------------
+
+	Mounting with other subsystems is a good test because there is a
+	race and lock dependency with other cgroup subsystems.
+
+	example::
+
+		# mount -t cgroup none /cgroup -o cpuset,memory,cpu,devices
+
+	and do task move, mkdir, rmdir etc...under this.
+
+9.7 swapoff
+-----------
+
+	Besides management of swap is one of complicated parts of memcg,
+	call path of swap-in at swapoff is not same as usual swap-in path..
+	It's worth to be tested explicitly.
+
+	For example, test like following is good:
+
+	(Shell-A)::
+
+		# mount -t cgroup none /cgroup -o memory
+		# mkdir /cgroup/test
+		# echo 40M > /cgroup/test/memory.limit_in_bytes
+		# echo 0 > /cgroup/test/tasks
+
+	Run malloc(100M) program under this. You'll see 60M of swaps.
+
+	(Shell-B)::
+
+		# move all tasks in /cgroup/test to /cgroup
+		# /sbin/swapoff -a
+		# rmdir /cgroup/test
+		# kill malloc task.
+
+	Of course, tmpfs v.s. swapoff test should be tested, too.
+
+9.8 OOM-Killer
+--------------
+
+	Out-of-memory caused by memcg's limit will kill tasks under
+	the memcg. When hierarchy is used, a task under hierarchy
+	will be killed by the kernel.
+
+	In this case, panic_on_oom shouldn't be invoked and tasks
+	in other groups shouldn't be killed.
+
+	It's not difficult to cause OOM under memcg as following.
+
+	Case A) when you can swapoff::
+
+		#swapoff -a
+		#echo 50M > /memory.limit_in_bytes
+
+	run 51M of malloc
+
+	Case B) when you use mem+swap limitation::
+
+		#echo 50M > memory.limit_in_bytes
+		#echo 50M > memory.memsw.limit_in_bytes
+
+	run 51M of malloc
+
+9.9 Move charges at task migration
+----------------------------------
+
+	Charges associated with a task can be moved along with task migration.
+
+	(Shell-A)::
+
+		#mkdir /cgroup/A
+		#echo $$ >/cgroup/A/tasks
+
+	run some programs which uses some amount of memory in /cgroup/A.
+
+	(Shell-B)::
+
+		#mkdir /cgroup/B
+		#echo 1 >/cgroup/B/memory.move_charge_at_immigrate
+		#echo "pid of the program running in group A" >/cgroup/B/tasks
+
+	You can see charges have been moved by reading ``*.usage_in_bytes`` or
+	memory.stat of both A and B.
+
+	See 8.2 of Documentation/admin-guide/cgroup-v1/memory.rst to see what value should
+	be written to move_charge_at_immigrate.
+
+9.10 Memory thresholds
+----------------------
+
+	Memory controller implements memory thresholds using cgroups notification
+	API. You can use tools/cgroup/cgroup_event_listener.c to test it.
+
+	(Shell-A) Create cgroup and run event listener::
+
+		# mkdir /cgroup/A
+		# ./cgroup_event_listener /cgroup/A/memory.usage_in_bytes 5M
+
+	(Shell-B) Add task to cgroup and try to allocate and free memory::
+
+		# echo $$ >/cgroup/A/tasks
+		# a="$(dd if=/dev/zero bs=1M count=10)"
+		# a=
+
+	You will see message from cgroup_event_listener every time you cross
+	the thresholds.
+
+	Use /cgroup/A/memory.memsw.usage_in_bytes to test memsw thresholds.
+
+	It's good idea to test root cgroup as well.