Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 157 insertions, 0 deletions

diff --git a/Documentation/admin-guide/media/bt8xx.rst b/Documentation/admin-guide/media/bt8xx.rst
new file mode 100644
index 000000000..3589f6ab7
--- /dev/null
+++ b/Documentation/admin-guide/media/bt8xx.rst
@@ -0,0 +1,157 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================================
+How to get the bt8xx cards working
+==================================
+
+Authors:
+	 Richard Walker,
+	 Jamie Honan,
+	 Michael Hunold,
+	 Manu Abraham,
+	 Uwe Bugla,
+	 Michael Krufky
+
+General information
+-------------------
+
+This class of cards has a bt878a as the PCI interface, and require the bttv
+driver for accessing the i2c bus and the gpio pins of the bt8xx chipset.
+
+Please see Documentation/admin-guide/media/bttv-cardlist.rst for a complete
+list of Cards based on the Conexant Bt8xx PCI bridge supported by the
+Linux Kernel.
+
+In order to be able to compile the kernel, some config options should be
+enabled::
+
+    ./scripts/config -e PCI
+    ./scripts/config -e INPUT
+    ./scripts/config -m I2C
+    ./scripts/config -m MEDIA_SUPPORT
+    ./scripts/config -e MEDIA_PCI_SUPPORT
+    ./scripts/config -e MEDIA_ANALOG_TV_SUPPORT
+    ./scripts/config -e MEDIA_DIGITAL_TV_SUPPORT
+    ./scripts/config -e MEDIA_RADIO_SUPPORT
+    ./scripts/config -e RC_CORE
+    ./scripts/config -m VIDEO_BT848
+    ./scripts/config -m DVB_BT8XX
+
+If you want to automatically support all possible variants of the Bt8xx
+cards, you should also do::
+
+    ./scripts/config -e MEDIA_SUBDRV_AUTOSELECT
+
+.. note::
+
+   Please use the following options with care as deselection of drivers which
+   are in fact necessary may result in DVB devices that cannot be tuned due
+   to lack of driver support.
+
+If your goal is to just support an specific board, you may, instead,
+disable MEDIA_SUBDRV_AUTOSELECT and manually select the frontend drivers
+required by your board. With that, you can save some RAM.
+
+You can do that by calling make xconfig/qconfig/menuconfig and look at
+the options on those menu options (only enabled if
+``Autoselect ancillary drivers`` is disabled:
+
+#) ``Device drivers`` => ``Multimedia support`` => ``Customize TV tuners``
+#) ``Device drivers`` => ``Multimedia support`` => ``Customize DVB frontends``
+
+Then, on each of the above menu, please select your card-specific
+frontend and tuner modules.
+
+
+Loading Modules
+---------------
+
+Regular case: If the bttv driver detects a bt8xx-based DVB card, all
+frontend and backend modules will be loaded automatically.
+
+Exceptions are:
+
+- Old TV cards without EEPROMs, sharing a common PCI subsystem ID;
+- Old TwinHan DST cards or clones with or without CA slot and not
+  containing an Eeprom.
+
+In the following cases overriding the PCI type detection for bttv and
+for dvb-bt8xx drivers by passing modprobe parameters may be necessary.
+
+Running TwinHan and Clones
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+As shown at Documentation/admin-guide/media/bttv-cardlist.rst, TwinHan and
+clones use ``card=113`` modprobe parameter. So, in order to properly
+detect it for devices without EEPROM, you should use::
+
+	$ modprobe bttv card=113
+	$ modprobe dst
+
+Useful parameters for verbosity level and debugging the dst module::
+
+	verbose=0:		messages are disabled
+		1:		only error messages are displayed
+		2:		notifications are displayed
+		3:		other useful messages are displayed
+		4:		debug setting
+	dst_addons=0:		card is a free to air (FTA) card only
+		0x20:	card has a conditional access slot for scrambled channels
+	dst_algo=0:		(default) Software tuning algorithm
+	         1:		Hardware tuning algorithm
+
+
+The autodetected values are determined by the cards' "response string".
+
+In your logs see f. ex.: dst_get_device_id: Recognize [DSTMCI].
+
+For bug reports please send in a complete log with verbose=4 activated.
+Please also see Documentation/admin-guide/media/ci.rst.
+
+Running multiple cards
+~~~~~~~~~~~~~~~~~~~~~~
+
+See Documentation/admin-guide/media/bttv-cardlist.rst for a complete list of
+Card ID. Some examples:
+
+	===========================	===
+	Brand name			ID
+	===========================	===
+	Pinnacle PCTV Sat		 94
+	Nebula Electronics Digi TV	104
+	pcHDTV HD-2000 TV		112
+	Twinhan DST and clones		113
+	Avermedia AverTV DVB-T 77:	123
+	Avermedia AverTV DVB-T 761	124
+	DViCO FusionHDTV DVB-T Lite	128
+	DViCO FusionHDTV 5 Lite		135
+	===========================	===
+
+.. note::
+
+   When you have multiple cards, the order of the card ID should
+   match the order where they're detected by the system. Please notice
+   that removing/inserting other PCI cards may change the detection
+   order.
+
+Example::
+
+	$ modprobe bttv card=113 card=135
+
+In case of further problems please subscribe and send questions to
+the mailing list: linux-media@vger.kernel.org.
+
+Probing the cards with broken PCI subsystem ID
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+There are some TwinHan cards whose EEPROM has become corrupted for some
+reason. The cards do not have a correct PCI subsystem ID.
+Still, it is possible to force probing the cards with::
+
+	$ echo 109e 0878 $subvendor $subdevice > \
+		/sys/bus/pci/drivers/bt878/new_id
+
+The two numbers there are::
+
+	109e: PCI_VENDOR_ID_BROOKTREE
+	0878: PCI_DEVICE_ID_BROOKTREE_878