Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 196 insertions, 0 deletions

diff --git a/Documentation/dev-tools/kunit/architecture.rst b/Documentation/dev-tools/kunit/architecture.rst
new file mode 100644
index 000000000..e95ab0534
--- /dev/null
+++ b/Documentation/dev-tools/kunit/architecture.rst
@@ -0,0 +1,196 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================
+KUnit Architecture
+==================
+
+The KUnit architecture is divided into two parts:
+
+- `In-Kernel Testing Framework`_
+- `kunit_tool (Command-line Test Harness)`_
+
+In-Kernel Testing Framework
+===========================
+
+The kernel testing library supports KUnit tests written in C using
+KUnit. These KUnit tests are kernel code. KUnit performs the following
+tasks:
+
+- Organizes tests
+- Reports test results
+- Provides test utilities
+
+Test Cases
+----------
+
+The test case is the fundamental unit in KUnit. KUnit test cases are organised
+into suites. A KUnit test case is a function with type signature
+``void (*)(struct kunit *test)``. These test case functions are wrapped in a
+struct called struct kunit_case.
+
+.. note:
+	``generate_params`` is optional for non-parameterized tests.
+
+Each KUnit test case receives a ``struct kunit`` context object that tracks a
+running test. The KUnit assertion macros and other KUnit utilities use the
+``struct kunit`` context object. As an exception, there are two fields:
+
+- ``->priv``: The setup functions can use it to store arbitrary test
+  user data.
+
+- ``->param_value``: It contains the parameter value which can be
+  retrieved in the parameterized tests.
+
+Test Suites
+-----------
+
+A KUnit suite includes a collection of test cases. The KUnit suites
+are represented by the ``struct kunit_suite``. For example:
+
+.. code-block:: c
+
+	static struct kunit_case example_test_cases[] = {
+		KUNIT_CASE(example_test_foo),
+		KUNIT_CASE(example_test_bar),
+		KUNIT_CASE(example_test_baz),
+		{}
+	};
+
+	static struct kunit_suite example_test_suite = {
+		.name = "example",
+		.init = example_test_init,
+		.exit = example_test_exit,
+		.test_cases = example_test_cases,
+	};
+	kunit_test_suite(example_test_suite);
+
+In the above example, the test suite ``example_test_suite``, runs the
+test cases ``example_test_foo``, ``example_test_bar``, and
+``example_test_baz``. Before running the test, the ``example_test_init``
+is called and after running the test, ``example_test_exit`` is called.
+The ``kunit_test_suite(example_test_suite)`` registers the test suite
+with the KUnit test framework.
+
+Executor
+--------
+
+The KUnit executor can list and run built-in KUnit tests on boot.
+The Test suites are stored in a linker section
+called ``.kunit_test_suites``. For the code, see ``KUNIT_TABLE()`` macro
+definition in
+`include/asm-generic/vmlinux.lds.h <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/asm-generic/vmlinux.lds.h?h=v6.0#n950>`_.
+The linker section consists of an array of pointers to
+``struct kunit_suite``, and is populated by the ``kunit_test_suites()``
+macro. The KUnit executor iterates over the linker section array in order to
+run all the tests that are compiled into the kernel.
+
+.. kernel-figure:: kunit_suitememorydiagram.svg
+	:alt:	KUnit Suite Memory
+
+	KUnit Suite Memory Diagram
+
+On the kernel boot, the KUnit executor uses the start and end addresses
+of this section to iterate over and run all tests. For the implementation of the
+executor, see
+`lib/kunit/executor.c <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/lib/kunit/executor.c>`_.
+When built as a module, the ``kunit_test_suites()`` macro defines a
+``module_init()`` function, which runs all the tests in the compilation
+unit instead of utilizing the executor.
+
+In KUnit tests, some error classes do not affect other tests
+or parts of the kernel, each KUnit case executes in a separate thread
+context. See the ``kunit_try_catch_run()`` function in
+`lib/kunit/try-catch.c <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/lib/kunit/try-catch.c?h=v5.15#n58>`_.
+
+Assertion Macros
+----------------
+
+KUnit tests verify state using expectations/assertions.
+All expectations/assertions are formatted as:
+``KUNIT_{EXPECT|ASSERT}_<op>[_MSG](kunit, property[, message])``
+
+- ``{EXPECT|ASSERT}`` determines whether the check is an assertion or an
+  expectation.
+  In the event of a failure, the testing flow differs as follows:
+
+	- For expectations, the test is marked as failed and the failure is logged.
+
+	- Failing assertions, on the other hand, result in the test case being
+	  terminated immediately.
+
+		- Assertions call the function:
+		  ``void __noreturn kunit_abort(struct kunit *)``.
+
+		- ``kunit_abort`` calls the function:
+		  ``void __noreturn kunit_try_catch_throw(struct kunit_try_catch *try_catch)``.
+
+		- ``kunit_try_catch_throw`` calls the function:
+		  ``void kthread_complete_and_exit(struct completion *, long) __noreturn;``
+		  and terminates the special thread context.
+
+- ``<op>`` denotes a check with options: ``TRUE`` (supplied property
+  has the boolean value "true"), ``EQ`` (two supplied properties are
+  equal), ``NOT_ERR_OR_NULL`` (supplied pointer is not null and does not
+  contain an "err" value).
+
+- ``[_MSG]`` prints a custom message on failure.
+
+Test Result Reporting
+---------------------
+KUnit prints the test results in KTAP format. KTAP is based on TAP14, see
+Documentation/dev-tools/ktap.rst.
+KTAP works with KUnit and Kselftest. The KUnit executor prints KTAP results to
+dmesg, and debugfs (if configured).
+
+Parameterized Tests
+-------------------
+
+Each KUnit parameterized test is associated with a collection of
+parameters. The test is invoked multiple times, once for each parameter
+value and the parameter is stored in the ``param_value`` field.
+The test case includes a KUNIT_CASE_PARAM() macro that accepts a
+generator function. The generator function is passed the previous parameter
+and returns the next parameter. It also includes a macro for generating
+array-based common-case generators.
+
+kunit_tool (Command-line Test Harness)
+======================================
+
+``kunit_tool`` is a Python script, found in ``tools/testing/kunit/kunit.py``. It
+is used to configure, build, execute, parse test results and run all of the
+previous commands in correct order (i.e., configure, build, execute and parse).
+You have two options for running KUnit tests: either build the kernel with KUnit
+enabled and manually parse the results (see
+Documentation/dev-tools/kunit/run_manual.rst) or use ``kunit_tool``
+(see Documentation/dev-tools/kunit/run_wrapper.rst).
+
+- ``configure`` command generates the kernel ``.config`` from a
+  ``.kunitconfig`` file (and any architecture-specific options).
+  The Python scripts available in ``qemu_configs`` folder
+  (for example, ``tools/testing/kunit/qemu configs/powerpc.py``) contains
+  additional configuration options for specific architectures.
+  It parses both the existing ``.config`` and the ``.kunitconfig`` files
+  to ensure that ``.config`` is a superset of ``.kunitconfig``.
+  If not, it will combine the two and run ``make olddefconfig`` to regenerate
+  the ``.config`` file. It then checks to see if ``.config`` has become a superset.
+  This verifies that all the Kconfig dependencies are correctly specified in the
+  file ``.kunitconfig``. The ``kunit_config.py`` script contains the code for parsing
+  Kconfigs. The code which runs ``make olddefconfig`` is part of the
+  ``kunit_kernel.py`` script. You can invoke this command through:
+  ``./tools/testing/kunit/kunit.py config`` and
+  generate a ``.config`` file.
+- ``build`` runs ``make`` on the kernel tree with required options
+  (depends on the architecture and some options, for example: build_dir)
+  and reports any errors.
+  To build a KUnit kernel from the current ``.config``, you can use the
+  ``build`` argument: ``./tools/testing/kunit/kunit.py build``.
+- ``exec`` command executes kernel results either directly (using
+  User-mode Linux configuration), or through an emulator such
+  as QEMU. It reads results from the log using standard
+  output (stdout), and passes them to ``parse`` to be parsed.
+  If you already have built a kernel with built-in KUnit tests,
+  you can run the kernel and display the test results with the ``exec``
+  argument: ``./tools/testing/kunit/kunit.py exec``.
+- ``parse`` extracts the KTAP output from a kernel log, parses
+  the test results, and prints a summary. For failed tests, any
+  diagnostic output will be included.