Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 323 insertions, 0 deletions

diff --git a/Documentation/dev-tools/kunit/run_wrapper.rst b/Documentation/dev-tools/kunit/run_wrapper.rst
new file mode 100644
index 000000000..dafe8eb28
--- /dev/null
+++ b/Documentation/dev-tools/kunit/run_wrapper.rst
@@ -0,0 +1,323 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============================
+Running tests with kunit_tool
+=============================
+
+We can either run KUnit tests using kunit_tool or can run tests
+manually, and then use kunit_tool to parse the results. To run tests
+manually, see: Documentation/dev-tools/kunit/run_manual.rst.
+As long as we can build the kernel, we can run KUnit.
+
+kunit_tool is a Python script which configures and builds a kernel, runs
+tests, and formats the test results.
+
+Run command:
+
+.. code-block::
+
+	./tools/testing/kunit/kunit.py run
+
+We should see the following:
+
+.. code-block::
+
+	Configuring KUnit Kernel ...
+	Building KUnit kernel...
+	Starting KUnit kernel...
+
+We may want to use the following options:
+
+.. code-block::
+
+	./tools/testing/kunit/kunit.py run --timeout=30 --jobs=`nproc --all`
+
+- ``--timeout`` sets a maximum amount of time for tests to run.
+- ``--jobs`` sets the number of threads to build the kernel.
+
+kunit_tool will generate a ``.kunitconfig`` with a default
+configuration, if no other ``.kunitconfig`` file exists
+(in the build directory). In addition, it verifies that the
+generated ``.config`` file contains the ``CONFIG`` options in the
+``.kunitconfig``.
+It is also possible to pass a separate ``.kunitconfig`` fragment to
+kunit_tool. This is useful if we have several different groups of
+tests we want to run independently, or if we want to use pre-defined
+test configs for certain subsystems.
+
+To use a different ``.kunitconfig`` file (such as one
+provided to test a particular subsystem), pass it as an option:
+
+.. code-block::
+
+	./tools/testing/kunit/kunit.py run --kunitconfig=fs/ext4/.kunitconfig
+
+To view kunit_tool flags (optional command-line arguments), run:
+
+.. code-block::
+
+	./tools/testing/kunit/kunit.py run --help
+
+Creating a ``.kunitconfig`` file
+================================
+
+If we want to run a specific set of tests (rather than those listed
+in the KUnit ``defconfig``), we can provide Kconfig options in the
+``.kunitconfig`` file. For default .kunitconfig, see:
+https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/testing/kunit/configs/default.config.
+A ``.kunitconfig`` is a ``minconfig`` (a .config
+generated by running ``make savedefconfig``), used for running a
+specific set of tests. This file contains the regular Kernel configs
+with specific test targets. The ``.kunitconfig`` also
+contains any other config options required by the tests (For example:
+dependencies for features under tests, configs that enable/disable
+certain code blocks, arch configs and so on).
+
+To create a ``.kunitconfig``, using the KUnit ``defconfig``:
+
+.. code-block::
+
+	cd $PATH_TO_LINUX_REPO
+	cp tools/testing/kunit/configs/default.config .kunit/.kunitconfig
+
+We can then add any other Kconfig options. For example:
+
+.. code-block::
+
+	CONFIG_LIST_KUNIT_TEST=y
+
+kunit_tool ensures that all config options in ``.kunitconfig`` are
+set in the kernel ``.config`` before running the tests. It warns if we
+have not included the options dependencies.
+
+.. note:: Removing something from the ``.kunitconfig`` will
+   not rebuild the ``.config file``. The configuration is only
+   updated if the ``.kunitconfig`` is not a subset of ``.config``.
+   This means that we can use other tools
+   (For example: ``make menuconfig``) to adjust other config options.
+   The build dir needs to be set for ``make menuconfig`` to
+   work, therefore  by default use ``make O=.kunit menuconfig``.
+
+Configuring, building, and running tests
+========================================
+
+If we want to make manual changes to the KUnit build process, we
+can run part of the KUnit build process independently.
+When running kunit_tool, from a ``.kunitconfig``, we can generate a
+``.config`` by using the ``config`` argument:
+
+.. code-block::
+
+	./tools/testing/kunit/kunit.py config
+
+To build a KUnit kernel from the current ``.config``, we can use the
+``build`` argument:
+
+.. code-block::
+
+	./tools/testing/kunit/kunit.py build
+
+If we already have built UML kernel with built-in KUnit tests, we
+can run the kernel, and display the test results with the ``exec``
+argument:
+
+.. code-block::
+
+	./tools/testing/kunit/kunit.py exec
+
+The ``run`` command discussed in section: **Running tests with kunit_tool**,
+is equivalent to running the above three commands in sequence.
+
+Parsing test results
+====================
+
+KUnit tests output displays results in TAP (Test Anything Protocol)
+format. When running tests, kunit_tool parses this output and prints
+a summary. To see the raw test results in TAP format, we can pass the
+``--raw_output`` argument:
+
+.. code-block::
+
+	./tools/testing/kunit/kunit.py run --raw_output
+
+If we have KUnit results in the raw TAP format, we can parse them and
+print the human-readable summary with the ``parse`` command for
+kunit_tool. This accepts a filename for an argument, or will read from
+standard input.
+
+.. code-block:: bash
+
+	# Reading from a file
+	./tools/testing/kunit/kunit.py parse /var/log/dmesg
+	# Reading from stdin
+	dmesg | ./tools/testing/kunit/kunit.py parse
+
+Filtering tests
+===============
+
+By passing a bash style glob filter to the ``exec`` or ``run``
+commands, we can run a subset of the tests built into a kernel . For
+example: if we only want to run KUnit resource tests, use:
+
+.. code-block::
+
+	./tools/testing/kunit/kunit.py run 'kunit-resource*'
+
+This uses the standard glob format with wildcard characters.
+
+.. _kunit-on-qemu:
+
+Running tests on QEMU
+=====================
+
+kunit_tool supports running tests on  qemu as well as
+via UML. To run tests on qemu, by default it requires two flags:
+
+- ``--arch``: Selects a configs collection (Kconfig, qemu config options
+  and so on), that allow KUnit tests to be run on the specified
+  architecture in a minimal way. The architecture argument is same as
+  the option name passed to the ``ARCH`` variable used by Kbuild.
+  Not all architectures currently support this flag, but we can use
+  ``--qemu_config`` to handle it. If ``um`` is passed (or this flag
+  is ignored), the tests will run via UML. Non-UML architectures,
+  for example: i386, x86_64, arm and so on; run on qemu.
+
+- ``--cross_compile``: Specifies the Kbuild toolchain. It passes the
+  same argument as passed to the ``CROSS_COMPILE`` variable used by
+  Kbuild. As a reminder, this will be the prefix for the toolchain
+  binaries such as GCC. For example:
+
+  - ``sparc64-linux-gnu`` if we have the sparc toolchain installed on
+    our system.
+
+  - ``$HOME/toolchains/microblaze/gcc-9.2.0-nolibc/microblaze-linux/bin/microblaze-linux``
+    if we have downloaded the microblaze toolchain from the 0-day
+    website to a directory in our home directory called toolchains.
+
+This means that for most architectures, running under qemu is as simple as:
+
+.. code-block:: bash
+
+	./tools/testing/kunit/kunit.py run --arch=x86_64
+
+When cross-compiling, we'll likely need to specify a different toolchain, for
+example:
+
+.. code-block:: bash
+
+	./tools/testing/kunit/kunit.py run \
+		--arch=s390 \
+		--cross_compile=s390x-linux-gnu-
+
+If we want to run KUnit tests on an architecture not supported by
+the ``--arch`` flag, or want to run KUnit tests on qemu using a
+non-default configuration; then we can write our own``QemuConfig``.
+These ``QemuConfigs`` are written in Python. They have an import line
+``from..qemu_config import QemuArchParams`` at the top of the file.
+The file must contain a variable called ``QEMU_ARCH`` that has an
+instance of ``QemuArchParams`` assigned to it. See example in:
+``tools/testing/kunit/qemu_configs/x86_64.py``.
+
+Once we have a ``QemuConfig``, we can pass it into kunit_tool,
+using the ``--qemu_config`` flag. When used, this flag replaces the
+``--arch`` flag. For example: using
+``tools/testing/kunit/qemu_configs/x86_64.py``, the invocation appear
+as
+
+.. code-block:: bash
+
+	./tools/testing/kunit/kunit.py run \
+		--timeout=60 \
+		--jobs=12 \
+		--qemu_config=./tools/testing/kunit/qemu_configs/x86_64.py
+
+Running command-line arguments
+==============================
+
+kunit_tool has a number of other command-line arguments which can
+be useful for our test environment. Below are the most commonly used
+command line arguments:
+
+- ``--help``: Lists all available options. To list common options,
+  place ``--help`` before the command. To list options specific to that
+  command, place ``--help`` after the command.
+
+  .. note:: Different commands (``config``, ``build``, ``run``, etc)
+            have different supported options.
+- ``--build_dir``: Specifies kunit_tool build directory. It includes
+  the ``.kunitconfig``, ``.config`` files and compiled kernel.
+
+- ``--make_options``: Specifies additional options to pass to make, when
+  compiling a kernel (using ``build`` or ``run`` commands). For example:
+  to enable compiler warnings, we can pass ``--make_options W=1``.
+
+- ``--alltests``: Enable a predefined set of options in order to build
+  as many tests as possible.
+
+  .. note:: The list of enabled options can be found in
+            ``tools/testing/kunit/configs/all_tests.config``.
+
+            If you only want to enable all tests with otherwise satisfied
+            dependencies, instead add ``CONFIG_KUNIT_ALL_TESTS=y`` to your
+            ``.kunitconfig``.
+
+- ``--kunitconfig``: Specifies the path or the directory of the ``.kunitconfig``
+  file. For example:
+
+  - ``lib/kunit/.kunitconfig`` can be the path of the file.
+
+  - ``lib/kunit`` can be the directory in which the file is located.
+
+  This file is used to build and run with a predefined set of tests
+  and their dependencies. For example, to run tests for a given subsystem.
+
+- ``--kconfig_add``: Specifies additional configuration options to be
+  appended to the ``.kunitconfig`` file. For example:
+
+  .. code-block::
+
+	./tools/testing/kunit/kunit.py run --kconfig_add CONFIG_KASAN=y
+
+- ``--arch``: Runs tests on the specified architecture. The architecture
+  argument is same as the Kbuild ARCH environment variable.
+  For example, i386, x86_64, arm, um, etc. Non-UML architectures run on qemu.
+  Default is `um`.
+
+- ``--cross_compile``: Specifies the Kbuild toolchain. It passes the
+  same argument as passed to the ``CROSS_COMPILE`` variable used by
+  Kbuild. This will be the prefix for the toolchain
+  binaries such as GCC. For example:
+
+  - ``sparc64-linux-gnu-`` if we have the sparc toolchain installed on
+    our system.
+
+  - ``$HOME/toolchains/microblaze/gcc-9.2.0-nolibc/microblaze-linux/bin/microblaze-linux``
+    if we have downloaded the microblaze toolchain from the 0-day
+    website to a specified path in our home directory called toolchains.
+
+- ``--qemu_config``: Specifies the path to a file containing a
+  custom qemu architecture definition. This should be a python file
+  containing a `QemuArchParams` object.
+
+- ``--qemu_args``: Specifies additional qemu arguments, for example, ``-smp 8``.
+
+- ``--jobs``: Specifies the number of jobs (commands) to run simultaneously.
+  By default, this is set to the number of cores on your system.
+
+- ``--timeout``: Specifies the maximum number of seconds allowed for all tests to run.
+  This does not include the time taken to build the tests.
+
+- ``--kernel_args``: Specifies additional kernel command-line arguments. May be repeated.
+
+- ``--run_isolated``: If set, boots the kernel for each individual suite/test.
+  This is useful for debugging a non-hermetic test, one that
+  might pass/fail based on what ran before it.
+
+- ``--raw_output``: If set, generates unformatted output from kernel. Possible options are:
+
+   - ``all``: To view the full kernel output, use ``--raw_output=all``.
+
+   - ``kunit``: This is the default option and filters to KUnit output. Use ``--raw_output`` or ``--raw_output=kunit``.
+
+- ``--json``: If set, stores the test results in a JSON format and prints to `stdout` or
+  saves to a file if a filename is specified.