Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

5 files changed, 650 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml b/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml
new file mode 100644
index 000000000..4cfc3a187
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/edac/amazon,al-mc-edac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amazon's Annapurna Labs Memory Controller EDAC
+
+maintainers:
+  - Talel Shenhar <talel@amazon.com>
+  - Talel Shenhar <talelshenhar@gmail.com>
+
+description: |
+  EDAC node is defined to describe on-chip error detection and correction for
+  Amazon's Annapurna Labs Memory Controller.
+
+properties:
+
+  compatible:
+    const: amazon,al-mc-edac
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: uncorrectable error interrupt
+      - description: correctable error interrupt
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: ue
+      - const: ce
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        edac@f0080000 {
+          #address-cells = <2>;
+          #size-cells = <2>;
+          compatible = "amazon,al-mc-edac";
+          reg = <0x0 0xf0080000 0x0 0x00010000>;
+          interrupt-parent = <&amazon_al_system_fabric>;
+          interrupt-names = "ue";
+          interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt b/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt
new file mode 100644
index 000000000..1006b0489
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt
@@ -0,0 +1,112 @@
+* APM X-Gene SoC EDAC node
+
+EDAC node is defined to describe on-chip error detection and correction.
+The follow error types are supported:
+
+  memory controller	- Memory controller
+  PMD (L1/L2)		- Processor module unit (PMD) L1/L2 cache
+  L3			- L3 cache controller
+  SoC			- SoC IP's such as Ethernet, SATA, and etc
+
+The following section describes the EDAC DT node binding.
+
+Required properties:
+- compatible		: Shall be "apm,xgene-edac".
+- regmap-csw		: Regmap of the CPU switch fabric (CSW) resource.
+- regmap-mcba		: Regmap of the MCB-A (memory bridge) resource.
+- regmap-mcbb		: Regmap of the MCB-B (memory bridge) resource.
+- regmap-efuse		: Regmap of the PMD efuse resource.
+- regmap-rb		: Regmap of the register bus resource. This property
+			  is optional only for compatibility. If the RB
+			  error conditions are not cleared, it will
+			  continuously generate interrupt.
+- reg			: First resource shall be the CPU bus (PCP) resource.
+- interrupts            : Interrupt-specifier for MCU, PMD, L3, or SoC error
+			  IRQ(s).
+
+Required properties for memory controller subnode:
+- compatible		: Shall be "apm,xgene-edac-mc".
+- reg			: First resource shall be the memory controller unit
+                          (MCU) resource.
+- memory-controller	: Instance number of the memory controller.
+
+Required properties for PMD subnode:
+- compatible		: Shall be "apm,xgene-edac-pmd" or
+                          "apm,xgene-edac-pmd-v2".
+- reg			: First resource shall be the PMD resource.
+- pmd-controller	: Instance number of the PMD controller.
+
+Required properties for L3 subnode:
+- compatible		: Shall be "apm,xgene-edac-l3" or
+                          "apm,xgene-edac-l3-v2".
+- reg			: First resource shall be the L3 EDAC resource.
+
+Required properties for SoC subnode:
+- compatible		: Shall be "apm,xgene-edac-soc-v1" for revision 1 or
+                          "apm,xgene-edac-l3-soc" for general value reporting
+                          only.
+- reg			: First resource shall be the SoC EDAC resource.
+
+Example:
+	csw: csw@7e200000 {
+		compatible = "apm,xgene-csw", "syscon";
+		reg = <0x0 0x7e200000 0x0 0x1000>;
+	};
+
+	mcba: mcba@7e700000 {
+		compatible = "apm,xgene-mcb", "syscon";
+		reg = <0x0 0x7e700000 0x0 0x1000>;
+	};
+
+	mcbb: mcbb@7e720000 {
+		compatible = "apm,xgene-mcb", "syscon";
+		reg = <0x0 0x7e720000 0x0 0x1000>;
+	};
+
+	efuse: efuse@1054a000 {
+		compatible = "apm,xgene-efuse", "syscon";
+		reg = <0x0 0x1054a000 0x0 0x20>;
+	};
+
+	rb: rb@7e000000 {
+		compatible = "apm,xgene-rb", "syscon";
+		reg = <0x0 0x7e000000 0x0 0x10>;
+	};
+
+	edac@78800000 {
+		compatible = "apm,xgene-edac";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		regmap-csw = <&csw>;
+		regmap-mcba = <&mcba>;
+		regmap-mcbb = <&mcbb>;
+		regmap-efuse = <&efuse>;
+		regmap-rb = <&rb>;
+		reg = <0x0 0x78800000 0x0 0x100>;
+		interrupts = <0x0 0x20 0x4>,
+			     <0x0 0x21 0x4>,
+			     <0x0 0x27 0x4>;
+
+		edacmc@7e800000 {
+			compatible = "apm,xgene-edac-mc";
+			reg = <0x0 0x7e800000 0x0 0x1000>;
+			memory-controller = <0>;
+		};
+
+		edacpmd@7c000000 {
+			compatible = "apm,xgene-edac-pmd";
+			reg = <0x0 0x7c000000 0x0 0x200000>;
+			pmd-controller = <0>;
+		};
+
+		edacl3@7e600000 {
+			compatible = "apm,xgene-edac-l3";
+			reg = <0x0 0x7e600000 0x0 0x1000>;
+		};
+
+		edacsoc@7e930000 {
+			compatible = "apm,xgene-edac-soc-v1";
+			reg = <0x0 0x7e930000 0x0 0x1000>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
new file mode 100644
index 000000000..8ca9e0a04
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
@@ -0,0 +1,28 @@
+Aspeed BMC SoC EDAC node
+
+The Aspeed BMC SoC supports DDR3 and DDR4 memory with and without ECC (error
+correction check).
+
+The memory controller supports SECDED (single bit error correction, double bit
+error detection) and single bit error auto scrubbing by reserving 8 bits for
+every 64 bit word (effectively reducing available memory to 8/9).
+
+Note, the bootloader must configure ECC mode in the memory controller.
+
+
+Required properties:
+- compatible: should be one of
+	- "aspeed,ast2400-sdram-edac"
+	- "aspeed,ast2500-sdram-edac"
+	- "aspeed,ast2600-sdram-edac"
+- reg:        sdram controller register set should be <0x1e6e0000 0x174>
+- interrupts: should be AVIC interrupt #0
+
+
+Example:
+
+	edac: sdram@1e6e0000 {
+		compatible = "aspeed,ast2500-sdram-edac";
+		reg = <0x1e6e0000 0x174>;
+		interrupts = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/edac/dmc-520.yaml b/Documentation/devicetree/bindings/edac/dmc-520.yaml
new file mode 100644
index 000000000..84db39666
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/dmc-520.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/edac/dmc-520.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM DMC-520 EDAC
+
+maintainers:
+  - Lei Wang <lewan@microsoft.com>
+
+description: |+
+  DMC-520 node is defined to describe DRAM error detection and correction.
+
+  https://static.docs.arm.com/100000/0200/corelink_dmc520_trm_100000_0200_01_en.pdf
+
+properties:
+  compatible:
+    items:
+      - const: brcm,dmc-520
+      - const: arm,dmc-520
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 10
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 10
+    items:
+      enum:
+        - ram_ecc_errc
+        - ram_ecc_errd
+        - dram_ecc_errc
+        - dram_ecc_errd
+        - failed_access
+        - failed_prog
+        - link_err
+        - temperature_event
+        - arch_fsm
+        - phy_request
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    dmc0: dmc@200000 {
+        compatible = "brcm,dmc-520", "arm,dmc-520";
+        reg = <0x200000 0x80000>;
+        interrupts = <0x0 0x349 0x4>, <0x0 0x34B 0x4>;
+        interrupt-names = "dram_ecc_errc", "dram_ecc_errd";
+    };
diff --git a/Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt
new file mode 100644
index 000000000..8f52206cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt
@@ -0,0 +1,383 @@
+Altera SoCFPGA ECC Manager
+This driver uses the EDAC framework to implement the SOCFPGA ECC Manager.
+The ECC Manager counts and corrects single bit errors and counts/handles
+double bit errors which are uncorrectable.
+
+Cyclone5 and Arria5 ECC Manager
+Required Properties:
+- compatible : Should be "altr,socfpga-ecc-manager"
+- #address-cells: must be 1
+- #size-cells: must be 1
+- ranges : standard definition, should translate from local addresses
+
+Subcomponents:
+
+L2 Cache ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-l2-ecc"
+- reg : Address and size for ECC error interrupt clear registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+	interrupt. Note the rising edge type.
+
+On Chip RAM ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-ocram-ecc"
+- reg : Address and size for ECC error interrupt clear registers.
+- iram : phandle to On-Chip RAM definition.
+- interrupts : Should be single bit error interrupt, then double bit error
+	interrupt. Note the rising edge type.
+
+Example:
+
+	eccmgr: eccmgr@ffd08140 {
+		compatible = "altr,socfpga-ecc-manager";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		l2-ecc@ffd08140 {
+			compatible = "altr,socfpga-l2-ecc";
+			reg = <0xffd08140 0x4>;
+			interrupts = <0 36 1>, <0 37 1>;
+		};
+
+		ocram-ecc@ffd08144 {
+			compatible = "altr,socfpga-ocram-ecc";
+			reg = <0xffd08144 0x4>;
+			iram = <&ocram>;
+			interrupts = <0 178 1>, <0 179 1>;
+		};
+	};
+
+Arria10 SoCFPGA ECC Manager
+The Arria10 SoC ECC Manager handles the IRQs for each peripheral
+in a shared register instead of individual IRQs like the Cyclone5
+and Arria5. Therefore the device tree is different as well.
+
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-ecc-manager"
+- altr,sysgr-syscon : phandle to Arria10 System Manager Block
+	containing the ECC manager registers.
+- #address-cells: must be 1
+- #size-cells: must be 1
+- interrupts : Should be single bit error interrupt, then double bit error
+	interrupt.
+- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
+- #interrupt-cells : must be set to 2.
+- ranges : standard definition, should translate from local addresses
+
+Subcomponents:
+
+L2 Cache ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-l2-ecc"
+- reg : Address and size for ECC error interrupt clear registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+On-Chip RAM ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-ocram-ecc"
+- reg        : Address and size for ECC block registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+Ethernet FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-eth-mac-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent Ethernet node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+NAND FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-nand-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent NAND node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+DMA FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-dma-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent DMA node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+USB FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-usb-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent USB node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+QSPI FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-qspi-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent QSPI node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+SDMMC FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-sdmmc-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent SD/MMC node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order for port A, and then single bit error interrupt,
+	then double bit error interrupt in this order for port B.
+
+Example:
+
+	eccmgr: eccmgr@ffd06000 {
+		compatible = "altr,socfpga-a10-ecc-manager";
+		altr,sysmgr-syscon = <&sysmgr>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 0 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ranges;
+
+		l2-ecc@ffd06010 {
+			compatible = "altr,socfpga-a10-l2-ecc";
+			reg = <0xffd06010 0x4>;
+			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+				     <32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ocram-ecc@ff8c3000 {
+			compatible = "altr,socfpga-a10-ocram-ecc";
+			reg = <0xff8c3000 0x90>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
+				     <33 IRQ_TYPE_LEVEL_HIGH> ;
+		};
+
+		emac0-rx-ecc@ff8c0800 {
+			compatible = "altr,socfpga-eth-mac-ecc";
+			reg = <0xff8c0800 0x400>;
+			altr,ecc-parent = <&gmac0>;
+			interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
+				     <36 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		emac0-tx-ecc@ff8c0c00 {
+			compatible = "altr,socfpga-eth-mac-ecc";
+			reg = <0xff8c0c00 0x400>;
+			altr,ecc-parent = <&gmac0>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
+				     <37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nand-buf-ecc@ff8c2000 {
+			compatible = "altr,socfpga-nand-ecc";
+			reg = <0xff8c2000 0x400>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>,
+				     <43 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nand-rd-ecc@ff8c2400 {
+			compatible = "altr,socfpga-nand-ecc";
+			reg = <0xff8c2400 0x400>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>,
+				     <45 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nand-wr-ecc@ff8c2800 {
+			compatible = "altr,socfpga-nand-ecc";
+			reg = <0xff8c2800 0x400>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+				     <44 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma-ecc@ff8c8000 {
+			compatible = "altr,socfpga-dma-ecc";
+			reg = <0xff8c8000 0x400>;
+			altr,ecc-parent = <&pdma>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+				     <42 IRQ_TYPE_LEVEL_HIGH>;
+
+		usb0-ecc@ff8c8800 {
+			compatible = "altr,socfpga-usb-ecc";
+			reg = <0xff8c8800 0x400>;
+			altr,ecc-parent = <&usb0>;
+			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+				     <34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		qspi-ecc@ff8c8400 {
+			compatible = "altr,socfpga-qspi-ecc";
+			reg = <0xff8c8400 0x400>;
+			altr,ecc-parent = <&qspi>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+				     <46 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		sdmmc-ecc@ff8c2c00 {
+			compatible = "altr,socfpga-sdmmc-ecc";
+			reg = <0xff8c2c00 0x400>;
+			altr,ecc-parent = <&mmc>;
+			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+				     <47 IRQ_TYPE_LEVEL_HIGH>,
+				     <16 IRQ_TYPE_LEVEL_HIGH>,
+				     <48 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+Stratix10 SoCFPGA ECC Manager (ARM64)
+The Stratix10 SoC ECC Manager handles the IRQs for each peripheral
+in a shared register similar to the Arria10. However, Stratix10 ECC
+requires access to registers that can only be read from Secure Monitor
+with SMC calls. Therefore the device tree is slightly different. Note
+that only 1 interrupt is sent in Stratix10 because the double bit errors
+are treated as SErrors in ARM64 instead of IRQs in ARM32.
+
+Required Properties:
+- compatible : Should be "altr,socfpga-s10-ecc-manager"
+- altr,sysgr-syscon : phandle to Stratix10 System Manager Block
+	              containing the ECC manager registers.
+- interrupts : Should be single bit error interrupt.
+- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
+- #interrupt-cells : must be set to 2.
+- #address-cells: must be 1
+- #size-cells: must be 1
+- ranges : standard definition, should translate from local addresses
+
+Subcomponents:
+
+SDRAM ECC
+Required Properties:
+- compatible : Should be "altr,sdram-edac-s10"
+- interrupts : Should be single bit error interrupt.
+
+On-Chip RAM ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-s10-ocram-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent OCRAM node.
+- interrupts      : Should be single bit error interrupt.
+
+Ethernet FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-s10-eth-mac-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent Ethernet node.
+- interrupts      : Should be single bit error interrupt.
+
+NAND FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-s10-nand-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent NAND node.
+- interrupts      : Should be single bit error interrupt.
+
+DMA FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-s10-dma-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent DMA node.
+- interrupts      : Should be single bit error interrupt.
+
+USB FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-s10-usb-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent USB node.
+- interrupts      : Should be single bit error interrupt.
+
+SDMMC FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-s10-sdmmc-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent SD/MMC node.
+- interrupts      : Should be single bit error interrupt for port A
+		    and then single bit error interrupt for port B.
+
+Example:
+
+	eccmgr {
+		compatible = "altr,socfpga-s10-ecc-manager";
+		altr,sysmgr-syscon = <&sysmgr>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <0 15 4>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ranges;
+
+		sdramedac {
+			compatible = "altr,sdram-edac-s10";
+			interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ocram-ecc@ff8cc000 {
+			compatible = "altr,socfpga-s10-ocram-ecc";
+			reg = <ff8cc000 0x100>;
+			altr,ecc-parent = <&ocram>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		emac0-rx-ecc@ff8c0000 {
+			compatible = "altr,socfpga-s10-eth-mac-ecc";
+			reg = <0xff8c0000 0x100>;
+			altr,ecc-parent = <&gmac0>;
+			interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		emac0-tx-ecc@ff8c0400 {
+			compatible = "altr,socfpga-s10-eth-mac-ecc";
+			reg = <0xff8c0400 0x100>;
+			altr,ecc-parent = <&gmac0>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>'
+		};
+
+		nand-buf-ecc@ff8c8000 {
+			compatible = "altr,socfpga-s10-nand-ecc";
+			reg = <0xff8c8000 0x100>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nand-rd-ecc@ff8c8400 {
+			compatible = "altr,socfpga-s10-nand-ecc";
+			reg = <0xff8c8400 0x100>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nand-wr-ecc@ff8c8800 {
+			compatible = "altr,socfpga-s10-nand-ecc";
+			reg = <0xff8c8800 0x100>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma-ecc@ff8c9000 {
+			compatible = "altr,socfpga-s10-dma-ecc";
+			reg = <0xff8c9000 0x100>;
+			altr,ecc-parent = <&pdma>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+		usb0-ecc@ff8c4000 {
+			compatible = "altr,socfpga-s10-usb-ecc";
+			reg = <0xff8c4000 0x100>;
+			altr,ecc-parent = <&usb0>;
+			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		sdmmc-ecc@ff8c8c00 {
+			compatible = "altr,socfpga-s10-sdmmc-ecc";
+			reg = <0xff8c8c00 0x100>;
+			altr,ecc-parent = <&mmc>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+				     <15 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};