Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 329 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
new file mode 100644
index 000000000..197050338
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -0,0 +1,329 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/st,stm32-dfsdm-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DFSDM ADC device driver
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+  - Olivier Moysan <olivier.moysan@foss.st.com>
+
+description: |
+  STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to
+  interface external sigma delta modulators to STM32 micro controllers.
+  It is mainly targeted for:
+  - Sigma delta modulators (motor control, metering...)
+  - PDM microphones (audio digital microphone)
+
+  It features up to 8 serial digital interfaces (SPI or Manchester) and
+  up to 4 filters on stm32h7 or 6 filters on stm32mp1.
+
+  Each child node matches with a filter instance.
+
+properties:
+  compatible:
+    enum:
+      - st,stm32h7-dfsdm
+      - st,stm32mp1-dfsdm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description:
+          Internal clock used for DFSDM digital processing and control blocks.
+          dfsdm clock can also feed CLKOUT, when CLKOUT is used.
+      - description: audio clock can be used as an alternate to feed CLKOUT.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: dfsdm
+      - const: audio
+    minItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  spi-max-frequency:
+    description:
+      SPI clock OUT frequency (Hz). Requested only for SPI master mode.
+      This clock must be set according to the "clock" property.
+      Frequency must be a multiple of the rcc clock frequency.
+      If not, SPI CLKOUT frequency will not be accurate.
+    maximum: 20000000
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+patternProperties:
+  "^filter@[0-9]+$":
+    type: object
+    unevaluatedProperties: false
+    description: child node
+
+    properties:
+      compatible:
+        enum:
+          - st,stm32-dfsdm-adc
+          - st,stm32-dfsdm-dmic
+
+      reg:
+        description: Specifies the DFSDM filter instance used.
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      st,adc-channels:
+        description: |
+          List of single-ended channels muxed for this ADC.
+          On stm32h7 and stm32mp1:
+          - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7.
+          - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          minimum: 0
+          maximum: 7
+
+      st,adc-channel-names:
+        description: List of single-ended channel names.
+
+      st,filter-order:
+        description: |
+          SinC filter order from 0 to 5.
+          - 0: FastSinC
+          - [1-5]: order 1 to 5.
+          For audio purpose it is recommended to use order 3 to 5.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        maximum: 5
+
+      "#io-channel-cells":
+        const: 1
+
+      st,adc-channel-types:
+        description: |
+          Single-ended channel input type.
+          - "SPI_R": SPI with data on rising edge (default)
+          - "SPI_F": SPI with data on falling edge
+          - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1
+          - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
+        items:
+          enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]
+        $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+      st,adc-channel-clk-src:
+        description: |
+          Conversion clock source.
+          - "CLKIN": external SPI clock (CLKIN x)
+          - "CLKOUT": internal SPI clock (CLKOUT) (default)
+          - "CLKOUT_F": internal SPI clock divided by 2 (falling edge).
+          - "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
+        items:
+          enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]
+        $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+      st,adc-alt-channel:
+        description:
+          Must be defined if two sigma delta modulators are
+          connected on same SPI input.
+          If not set, channel n is connected to SPI input n.
+          If set, channel n is connected to SPI input n + 1.
+        type: boolean
+
+      st,filter0-sync:
+        description:
+          Set to 1 to synchronize with DFSDM filter instance 0.
+          Used for multi microphones synchronization.
+        type: boolean
+
+      dmas:
+        maxItems: 1
+
+      dma-names:
+        items:
+          - const: rx
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - st,adc-channels
+      - st,adc-channel-names
+      - st,filter-order
+      - "#io-channel-cells"
+
+    allOf:
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: st,stm32-dfsdm-adc
+
+        then:
+          properties:
+            st,adc-channels:
+              minItems: 1
+              maxItems: 8
+
+            st,adc-channel-names:
+              minItems: 1
+              maxItems: 8
+
+            st,adc-channel-types:
+              minItems: 1
+              maxItems: 8
+
+            st,adc-channel-clk-src:
+              minItems: 1
+              maxItems: 8
+
+            io-channels:
+              description:
+                From common IIO binding. Used to pipe external sigma delta
+                modulator or internal ADC output to DFSDM channel.
+
+          required:
+            - io-channels
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: st,stm32-dfsdm-dmic
+
+        then:
+          properties:
+            st,adc-channels:
+              maxItems: 1
+
+            st,adc-channel-names:
+              maxItems: 1
+
+            st,adc-channel-types:
+              maxItems: 1
+
+            st,adc-channel-clk-src:
+              maxItems: 1
+
+          required:
+            - dmas
+            - dma-names
+
+          patternProperties:
+            "^dfsdm-dai+$":
+              type: object
+              additionalProperties: false
+              description: child node
+
+              properties:
+                compatible:
+                  enum:
+                    - st,stm32h7-dfsdm-dai
+
+                "#sound-dai-cells":
+                  const: 0
+
+                io-channels:
+                  description:
+                    From common IIO binding. Used to pipe external sigma delta
+                    modulator or internal ADC output to DFSDM channel.
+
+              required:
+                - compatible
+                - "#sound-dai-cells"
+                - io-channels
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32h7-dfsdm
+
+    then:
+      patternProperties:
+        "^filter@[0-9]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp1-dfsdm
+
+    then:
+      patternProperties:
+        "^filter@[0-9]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 5
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    dfsdm: dfsdm@4400d000 {
+      compatible = "st,stm32mp1-dfsdm";
+      reg = <0x4400d000 0x800>;
+      clocks = <&rcc DFSDM_K>, <&rcc ADFSDM_K>;
+      clock-names = "dfsdm", "audio";
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dfsdm0: filter@0 {
+        compatible = "st,stm32-dfsdm-dmic";
+        reg = <0>;
+        interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dmamux1 101 0x400 0x01>;
+        dma-names = "rx";
+        #io-channel-cells = <1>;
+        st,adc-channels = <1>;
+        st,adc-channel-names = "dmic0";
+        st,adc-channel-types = "SPI_R";
+        st,adc-channel-clk-src = "CLKOUT";
+        st,filter-order = <5>;
+
+        asoc_pdm0: dfsdm-dai {
+          compatible = "st,stm32h7-dfsdm-dai";
+          #sound-dai-cells = <0>;
+          io-channels = <&dfsdm0 0>;
+        };
+      };
+
+      dfsdm_pdm1: filter@1 {
+        compatible = "st,stm32-dfsdm-adc";
+        reg = <1>;
+        interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dmamux1 102 0x400 0x01>;
+        dma-names = "rx";
+        #io-channel-cells = <1>;
+        st,adc-channels = <2 3>;
+        st,adc-channel-names = "in2", "in3";
+        st,adc-channel-types = "SPI_R", "SPI_R";
+        st,adc-channel-clk-src = "CLKOUT_F", "CLKOUT_F";
+        io-channels = <&sd_adc2 &sd_adc3>;
+        st,filter-order = <1>;
+      };
+    };
+
+...