Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 296 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
new file mode 100644
index 000000000..8449e14af
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
@@ -0,0 +1,296 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Generic Interrupt Controller, version 3
+
+maintainers:
+  - Marc Zyngier <maz@kernel.org>
+
+description: |
+  AArch64 SMP cores are often associated with a GICv3, providing Private
+  Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI),
+  Software Generated Interrupts (SGI), and Locality-specific Peripheral
+  Interrupts (LPI).
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,msm8996-gic-v3
+          - const: arm,gic-v3
+      - const: arm,gic-v3
+
+  interrupt-controller: true
+
+  "#address-cells":
+    enum: [ 0, 1, 2 ]
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  "#interrupt-cells":
+    description: |
+      Specifies the number of cells needed to encode an interrupt source.
+      Must be a single cell with a value of at least 3.
+      If the system requires describing PPI affinity, then the value must
+      be at least 4.
+
+      The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
+      interrupts, 2 for interrupts in the Extended SPI range, 3 for the
+      Extended PPI range. Other values are reserved for future use.
+
+      The 2nd cell contains the interrupt number for the interrupt type.
+      SPI interrupts are in the range [0-987]. PPI interrupts are in the
+      range [0-15]. Extented SPI interrupts are in the range [0-1023].
+      Extended PPI interrupts are in the range [0-127].
+
+      The 3rd cell is the flags, encoded as follows:
+      bits[3:0] trigger type and level flags.
+        1 = edge triggered
+        4 = level triggered
+
+      The 4th cell is a phandle to a node describing a set of CPUs this
+      interrupt is affine to. The interrupt must be a PPI, and the node
+      pointed must be a subnode of the "ppi-partitions" subnode. For
+      interrupt types other than PPI or PPIs that are not partitionned,
+      this cell must be zero. See the "ppi-partitions" node description
+      below.
+
+      Cells 5 and beyond are reserved for future use and must have a value
+      of 0 if present.
+    enum: [ 3, 4 ]
+
+  reg:
+    description: |
+      Specifies base physical address(s) and size of the GIC
+      registers, in the following order:
+      - GIC Distributor interface (GICD)
+      - GIC Redistributors (GICR), one range per redistributor region
+      - GIC CPU interface (GICC)
+      - GIC Hypervisor interface (GICH)
+      - GIC Virtual CPU interface (GICV)
+
+      GICC, GICH and GICV are optional, but must be described if the CPUs
+      support them. Examples of such CPUs are ARM's implementations of the
+      ARMv8.0 architecture such as Cortex-A32, A34, A35, A53, A57, A72 and
+      A73 (this list is not exhaustive).
+
+    minItems: 2
+    maxItems: 4096   # Should be enough?
+
+  interrupts:
+    description:
+      Interrupt source of the VGIC maintenance interrupt.
+    maxItems: 1
+
+  redistributor-stride:
+    description:
+      If using padding pages, specifies the stride of consecutive
+      redistributors. Must be a multiple of 64kB.
+    $ref: /schemas/types.yaml#/definitions/uint64
+    multipleOf: 0x10000
+    exclusiveMinimum: 0
+
+  "#redistributor-regions":
+    description:
+      The number of independent contiguous regions occupied by the
+      redistributors. Required if more than one such region is present.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 4096
+
+  msi-controller:
+    description:
+      Only present if the Message Based Interrupt functionality is
+      being exposed by the HW, and the mbi-ranges property present.
+
+  mbi-ranges:
+    description:
+      A list of pairs <intid span>, where "intid" is the first SPI of a range
+      that can be used an MBI, and "span" the size of that range. Multiple
+      ranges can be provided.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      minItems: 2
+      maxItems: 2
+
+  mbi-alias:
+    description:
+      Address property. Base address of an alias of the GICD region containing
+      only the {SET,CLR}SPI registers to be used if isolation is required,
+      and if supported by the HW.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      minItems: 1
+      maxItems: 2
+
+  ppi-partitions:
+    type: object
+    description:
+      PPI affinity can be expressed as a single "ppi-partitions" node,
+      containing a set of sub-nodes.
+    patternProperties:
+      "^interrupt-partition-[0-9]+$":
+        type: object
+        properties:
+          affinity:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+            items:
+              maxItems: 1
+            description:
+              Should be a list of phandles to CPU nodes (as described in
+              Documentation/devicetree/bindings/arm/cpus.yaml).
+
+        required:
+          - affinity
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: aclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+dependencies:
+  mbi-ranges: [ msi-controller ]
+  msi-controller: [ mbi-ranges ]
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  "^gic-its@": false
+  "^interrupt-controller@[0-9a-f]+$": false
+  # msi-controller is preferred, but allow other names
+  "^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$":
+    type: object
+    description:
+      GICv3 has one or more Interrupt Translation Services (ITS) that are
+      used to route Message Signalled Interrupts (MSI) to the CPUs.
+    properties:
+      compatible:
+        const: arm,gic-v3-its
+
+      msi-controller: true
+
+      "#msi-cells":
+        description:
+          The single msi-cell is the DeviceID of the device which will generate
+          the MSI.
+        const: 1
+
+      reg:
+        description:
+          Specifies the base physical address and size of the ITS registers.
+        maxItems: 1
+
+      socionext,synquacer-pre-its:
+        description:
+          (u32, u32) tuple describing the untranslated
+          address and size of the pre-ITS window.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          minItems: 2
+          maxItems: 2
+
+    required:
+      - compatible
+      - msi-controller
+      - "#msi-cells"
+      - reg
+
+    additionalProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    gic: interrupt-controller@2cf00000 {
+      compatible = "arm,gic-v3";
+      #interrupt-cells = <3>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+      interrupt-controller;
+      reg = <0x2f000000 0x10000>,  // GICD
+            <0x2f100000 0x200000>,  // GICR
+            <0x2c000000 0x2000>,  // GICC
+            <0x2c010000 0x2000>,  // GICH
+            <0x2c020000 0x2000>;  // GICV
+      interrupts = <1 9 4>;
+
+      msi-controller;
+      mbi-ranges = <256 128>;
+
+      msi-controller@2c200000 {
+        compatible = "arm,gic-v3-its";
+        msi-controller;
+        #msi-cells = <1>;
+        reg = <0x2c200000 0x20000>;
+      };
+    };
+
+  - |
+    interrupt-controller@2c010000 {
+      compatible = "arm,gic-v3";
+      #interrupt-cells = <4>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+      interrupt-controller;
+      redistributor-stride = <0x0 0x40000>;  // 256kB stride
+      #redistributor-regions = <2>;
+      reg = <0x2c010000 0x10000>,  // GICD
+            <0x2d000000 0x800000>,  // GICR 1: CPUs 0-31
+            <0x2e000000 0x800000>,  // GICR 2: CPUs 32-63
+            <0x2c040000 0x2000>,  // GICC
+            <0x2c060000 0x2000>,  // GICH
+            <0x2c080000 0x2000>;  // GICV
+      interrupts = <1 9 4 0>;
+
+      msi-controller@2c200000 {
+        compatible = "arm,gic-v3-its";
+        msi-controller;
+        #msi-cells = <1>;
+        reg = <0x2c200000 0x20000>;
+      };
+
+      msi-controller@2c400000 {
+        compatible = "arm,gic-v3-its";
+        msi-controller;
+        #msi-cells = <1>;
+        reg = <0x2c400000 0x20000>;
+      };
+
+      ppi-partitions {
+        part0: interrupt-partition-0 {
+          affinity = <&cpu0>, <&cpu2>;
+        };
+
+        part1: interrupt-partition-1 {
+          affinity = <&cpu1>, <&cpu3>;
+        };
+      };
+    };
+
+
+    device@0 {
+      reg = <0 4>;
+      interrupts = <1 1 4 &part0>;
+    };
+
+...