Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 272 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
new file mode 100644
index 000000000..4aeda3797
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -0,0 +1,272 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,ipa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IP Accelerator (IPA)
+
+maintainers:
+  - Alex Elder <elder@kernel.org>
+
+description:
+  This binding describes the Qualcomm IPA.  The IPA is capable of offloading
+  certain network processing tasks (e.g. filtering, routing, and NAT) from
+  the main processor.
+
+  The IPA sits between multiple independent "execution environments,"
+  including the Application Processor (AP) and the modem.  The IPA presents
+  a Generic Software Interface (GSI) to each execution environment.
+  The GSI is an integral part of the IPA, but it is logically isolated
+  and has a distinct interrupt and a separately-defined address space.
+
+  See also soc/qcom/qcom,smp2p.txt and interconnect/interconnect.txt.  See
+  iommu/iommu.txt and iommu/arm,smmu.yaml for more information about SMMU
+  bindings.
+
+
+  - |
+    --------             ---------
+    |      |             |       |
+    |  AP  +<---.   .----+ Modem |
+    |      +--. |   | .->+       |
+    |      |  | |   | |  |       |
+    --------  | |   | |  ---------
+              v |   v |
+            --+-+---+-+--
+            |    GSI    |
+            |-----------|
+            |           |
+            |    IPA    |
+            |           |
+            -------------
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8998-ipa
+      - qcom,sc7180-ipa
+      - qcom,sc7280-ipa
+      - qcom,sdm845-ipa
+      - qcom,sdx55-ipa
+      - qcom,sm6350-ipa
+      - qcom,sm8350-ipa
+
+  reg:
+    items:
+      - description: IPA registers
+      - description: IPA shared memory
+      - description: GSI registers
+
+  reg-names:
+    items:
+      - const: ipa-reg
+      - const: ipa-shared
+      - const: gsi
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: core
+
+  interrupts:
+    items:
+      - description: IPA interrupt (hardware IRQ)
+      - description: GSI interrupt (hardware IRQ)
+      - description: Modem clock query interrupt (smp2p interrupt)
+      - description: Modem setup ready interrupt (smp2p interrupt)
+
+  interrupt-names:
+    items:
+      - const: ipa
+      - const: gsi
+      - const: ipa-clock-query
+      - const: ipa-setup-ready
+
+  interconnects:
+    oneOf:
+      - items:
+          - description: Path leading to system memory
+          - description: Path between the AP and IPA config space
+      - items:
+          - description: Path leading to system memory
+          - description: Path leading to internal memory
+          - description: Path between the AP and IPA config space
+
+  interconnect-names:
+    oneOf:
+      - items:
+          - const: memory
+          - const: config
+      - items:
+          - const: memory
+          - const: imem
+          - const: config
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the AOSS side-channel message RAM
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: State bits used in by the AP to signal the modem.
+    items:
+      - description: Whether the "ipa-clock-enabled" state bit is valid
+      - description: Whether the IPA clock is enabled (if valid)
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    items:
+      - const: ipa-clock-enabled-valid
+      - const: ipa-clock-enabled
+
+  qcom,gsi-loader:
+    enum:
+      - self
+      - modem
+      - skip
+    description:
+      Indicates how GSI firmware should be loaded.  If the AP loads
+      and validates GSI firmware, this property has value "self".
+      If the modem does this, this property has value "modem".
+      Otherwise, "skip" means GSI firmware loading is not required.
+
+  modem-init:
+    deprecated: true
+    type: boolean
+    description:
+      This is the older (deprecated) way of indicating how GSI firmware
+      should be loaded.  If present, the modem loads GSI firmware; if
+      absent, the AP loads GSI firmware.
+
+  memory-region:
+    maxItems: 1
+    description:
+      If present, a phandle for a reserved memory area that holds
+      the firmware passed to Trust Zone for authentication.  Required
+      when the AP (not the modem) performs early initialization.
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      If present, name (or relative path) of the file within the
+      firmware search path containing the firmware image used when
+      initializing IPA hardware.  Optional, and only used when
+      Trust Zone performs early initialization.
+
+required:
+  - compatible
+  - iommus
+  - reg
+  - clocks
+  - interrupts
+  - interconnects
+  - qcom,smem-states
+
+allOf:
+  # If qcom,gsi-loader is present, modem-init must not be present
+  - if:
+      required:
+        - qcom,gsi-loader
+    then:
+      properties:
+        modem-init: false
+
+      # If qcom,gsi-loader is "self", the AP loads GSI firmware, and
+      # memory-region must be specified
+      if:
+        properties:
+          qcom,gsi-loader:
+            contains:
+              const: self
+      then:
+        required:
+          - memory-region
+    else:
+      # If qcom,gsi-loader is not present, we use deprecated behavior.
+      # If modem-init is not present, the AP loads GSI firmware, and
+      # memory-region must be specified.
+      if:
+        not:
+          required:
+            - modem-init
+      then:
+        required:
+          - memory-region
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/clock/qcom,rpmh.h>
+        #include <dt-bindings/interconnect/qcom,sdm845.h>
+
+        smp2p-mpss {
+                compatible = "qcom,smp2p";
+                interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+                mboxes = <&apss_shared 6>;
+                qcom,smem = <94>, <432>;
+                qcom,local-pid = <0>;
+                qcom,remote-pid = <5>;
+
+                ipa_smp2p_out: ipa-ap-to-modem {
+                        qcom,entry-name = "ipa";
+                        #qcom,smem-state-cells = <1>;
+                };
+
+                ipa_smp2p_in: ipa-modem-to-ap {
+                        qcom,entry-name = "ipa";
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+        };
+
+        ipa@1e40000 {
+                compatible = "qcom,sc7180-ipa";
+
+                qcom,gsi-loader = "self";
+                memory-region = <&ipa_fw_mem>;
+                firmware-name = "qcom/sc7180-trogdor/modem/modem.mdt";
+
+                iommus = <&apps_smmu 0x440 0x0>,
+                         <&apps_smmu 0x442 0x0>;
+                reg = <0x1e40000 0x7000>,
+                      <0x1e47000 0x2000>,
+                      <0x1e04000 0x2c000>;
+                reg-names = "ipa-reg",
+                            "ipa-shared",
+                            "gsi";
+
+                interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
+                                      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+                                      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                                      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+                interrupt-names = "ipa",
+                                  "gsi",
+                                  "ipa-clock-query",
+                                  "ipa-setup-ready";
+
+                clocks = <&rpmhcc RPMH_IPA_CLK>;
+                clock-names = "core";
+
+                interconnects =
+                        <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+                        <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+                interconnect-names = "memory",
+                                     "imem",
+                                     "config";
+
+                qcom,qmp = <&aoss_qmp>;
+
+                qcom,smem-states = <&ipa_smp2p_out 0>,
+                                   <&ipa_smp2p_out 1>;
+                qcom,smem-state-names = "ipa-clock-enabled-valid",
+                                        "ipa-clock-enabled";
+        };