Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 152 insertions, 0 deletions

diff --git a/Documentation/driver-api/console.rst b/Documentation/driver-api/console.rst
new file mode 100644
index 000000000..8394ad774
--- /dev/null
+++ b/Documentation/driver-api/console.rst
@@ -0,0 +1,152 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+Console Drivers
+===============
+
+The Linux kernel has 2 general types of console drivers.  The first type is
+assigned by the kernel to all the virtual consoles during the boot process.
+This type will be called 'system driver', and only one system driver is allowed
+to exist. The system driver is persistent and it can never be unloaded, though
+it may become inactive.
+
+The second type has to be explicitly loaded and unloaded. This will be called
+'modular driver' by this document. Multiple modular drivers can coexist at
+any time with each driver sharing the console with other drivers including
+the system driver. However, modular drivers cannot take over the console
+that is currently occupied by another modular driver. (Exception: Drivers that
+call do_take_over_console() will succeed in the takeover regardless of the type
+of driver occupying the consoles.) They can only take over the console that is
+occupied by the system driver. In the same token, if the modular driver is
+released by the console, the system driver will take over.
+
+Modular drivers, from the programmer's point of view, have to call::
+
+	 do_take_over_console() - load and bind driver to console layer
+	 give_up_console() - unload driver; it will only work if driver
+			     is fully unbound
+
+In newer kernels, the following are also available::
+
+	 do_register_con_driver()
+	 do_unregister_con_driver()
+
+If sysfs is enabled, the contents of /sys/class/vtconsole can be
+examined. This shows the console backends currently registered by the
+system which are named vtcon<n> where <n> is an integer from 0 to 15.
+Thus::
+
+       ls /sys/class/vtconsole
+       .  ..  vtcon0  vtcon1
+
+Each directory in /sys/class/vtconsole has 3 files::
+
+     ls /sys/class/vtconsole/vtcon0
+     .  ..  bind  name  uevent
+
+What do these files signify?
+
+     1. bind - this is a read/write file. It shows the status of the driver if
+        read, or acts to bind or unbind the driver to the virtual consoles
+        when written to. The possible values are:
+
+	0
+	  - means the driver is not bound and if echo'ed, commands the driver
+	    to unbind
+
+        1
+	  - means the driver is bound and if echo'ed, commands the driver to
+	    bind
+
+     2. name - read-only file. Shows the name of the driver in this format::
+
+	  cat /sys/class/vtconsole/vtcon0/name
+	  (S) VGA+
+
+	      '(S)' stands for a (S)ystem driver, i.e., it cannot be directly
+	      commanded to bind or unbind
+
+	      'VGA+' is the name of the driver
+
+	  cat /sys/class/vtconsole/vtcon1/name
+	  (M) frame buffer device
+
+	      In this case, '(M)' stands for a (M)odular driver, one that can be
+	      directly commanded to bind or unbind.
+
+     3. uevent - ignore this file
+
+When unbinding, the modular driver is detached first, and then the system
+driver takes over the consoles vacated by the driver. Binding, on the other
+hand, will bind the driver to the consoles that are currently occupied by a
+system driver.
+
+NOTE1:
+  Binding and unbinding must be selected in Kconfig. It's under::
+
+    Device Drivers ->
+	Character devices ->
+		Support for binding and unbinding console drivers
+
+NOTE2:
+  If any of the virtual consoles are in KD_GRAPHICS mode, then binding or
+  unbinding will not succeed. An example of an application that sets the
+  console to KD_GRAPHICS is X.
+
+How useful is this feature? This is very useful for console driver
+developers. By unbinding the driver from the console layer, one can unload the
+driver, make changes, recompile, reload and rebind the driver without any need
+for rebooting the kernel. For regular users who may want to switch from
+framebuffer console to VGA console and vice versa, this feature also makes
+this possible. (NOTE NOTE NOTE: Please read fbcon.txt under Documentation/fb
+for more details.)
+
+Notes for developers
+====================
+
+do_take_over_console() is now broken up into::
+
+     do_register_con_driver()
+     do_bind_con_driver() - private function
+
+give_up_console() is a wrapper to do_unregister_con_driver(), and a driver must
+be fully unbound for this call to succeed. con_is_bound() will check if the
+driver is bound or not.
+
+Guidelines for console driver writers
+=====================================
+
+In order for binding to and unbinding from the console to properly work,
+console drivers must follow these guidelines:
+
+1. All drivers, except system drivers, must call either do_register_con_driver()
+   or do_take_over_console(). do_register_con_driver() will just add the driver
+   to the console's internal list. It won't take over the
+   console. do_take_over_console(), as it name implies, will also take over (or
+   bind to) the console.
+
+2. All resources allocated during con->con_init() must be released in
+   con->con_deinit().
+
+3. All resources allocated in con->con_startup() must be released when the
+   driver, which was previously bound, becomes unbound.  The console layer
+   does not have a complementary call to con->con_startup() so it's up to the
+   driver to check when it's legal to release these resources. Calling
+   con_is_bound() in con->con_deinit() will help.  If the call returned
+   false(), then it's safe to release the resources.  This balance has to be
+   ensured because con->con_startup() can be called again when a request to
+   rebind the driver to the console arrives.
+
+4. Upon exit of the driver, ensure that the driver is totally unbound. If the
+   condition is satisfied, then the driver must call do_unregister_con_driver()
+   or give_up_console().
+
+5. do_unregister_con_driver() can also be called on conditions which make it
+   impossible for the driver to service console requests.  This can happen
+   with the framebuffer console that suddenly lost all of its drivers.
+
+The current crop of console drivers should still work correctly, but binding
+and unbinding them may cause problems. With minimal fixes, these drivers can
+be made to work correctly.
+
+Antonino Daplas <adaplas@pol.net>