Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

5 files changed, 926 insertions, 0 deletions

diff --git a/Documentation/driver-api/soundwire/error_handling.rst b/Documentation/driver-api/soundwire/error_handling.rst
new file mode 100644
index 000000000..aa3a0a23a
--- /dev/null
+++ b/Documentation/driver-api/soundwire/error_handling.rst
@@ -0,0 +1,65 @@
+========================
+SoundWire Error Handling
+========================
+
+The SoundWire PHY was designed with care and errors on the bus are going to
+be very unlikely, and if they happen it should be limited to single bit
+errors. Examples of this design can be found in the synchronization
+mechanism (sync loss after two errors) and short CRCs used for the Bulk
+Register Access.
+
+The errors can be detected with multiple mechanisms:
+
+1. Bus clash or parity errors: This mechanism relies on low-level detectors
+   that are independent of the payload and usages, and they cover both control
+   and audio data. The current implementation only logs such errors.
+   Improvements could be invalidating an entire programming sequence and
+   restarting from a known position. In the case of such errors outside of a
+   control/command sequence, there is no concealment or recovery for audio
+   data enabled by the SoundWire protocol, the location of the error will also
+   impact its audibility (most-significant bits will be more impacted in PCM),
+   and after a number of such errors are detected the bus might be reset. Note
+   that bus clashes due to programming errors (two streams using the same bit
+   slots) or electrical issues during the transmit/receive transition cannot
+   be distinguished, although a recurring bus clash when audio is enabled is a
+   indication of a bus allocation issue. The interrupt mechanism can also help
+   identify Slaves which detected a Bus Clash or a Parity Error, but they may
+   not be responsible for the errors so resetting them individually is not a
+   viable recovery strategy.
+
+2. Command status: Each command is associated with a status, which only
+   covers transmission of the data between devices. The ACK status indicates
+   that the command was received and will be executed by the end of the
+   current frame. A NAK indicates that the command was in error and will not
+   be applied. In case of a bad programming (command sent to non-existent
+   Slave or to a non-implemented register) or electrical issue, no response
+   signals the command was ignored. Some Master implementations allow for a
+   command to be retransmitted several times.  If the retransmission fails,
+   backtracking and restarting the entire programming sequence might be a
+   solution. Alternatively some implementations might directly issue a bus
+   reset and re-enumerate all devices.
+
+3. Timeouts: In a number of cases such as ChannelPrepare or
+   ClockStopPrepare, the bus driver is supposed to poll a register field until
+   it transitions to a NotFinished value of zero. The MIPI SoundWire spec 1.1
+   does not define timeouts but the MIPI SoundWire DisCo document adds
+   recommendation on timeouts. If such configurations do not complete, the
+   driver will return a -ETIMEOUT. Such timeouts are symptoms of a faulty
+   Slave device and are likely impossible to recover from.
+
+Errors during global reconfiguration sequences are extremely difficult to
+handle:
+
+1. BankSwitch: An error during the last command issuing a BankSwitch is
+   difficult to backtrack from. Retransmitting the Bank Switch command may be
+   possible in a single segment setup, but this can lead to synchronization
+   problems when enabling multiple bus segments (a command with side effects
+   such as frame reconfiguration would be handled at different times). A global
+   hard-reset might be the best solution.
+
+Note that SoundWire does not provide a mechanism to detect illegal values
+written in valid registers. In a number of cases the standard even mentions
+that the Slave might behave in implementation-defined ways. The bus
+implementation does not provide a recovery mechanism for such errors, Slave
+or Master driver implementers are responsible for writing valid values in
+valid registers and implement additional range checking if needed.
diff --git a/Documentation/driver-api/soundwire/index.rst b/Documentation/driver-api/soundwire/index.rst
new file mode 100644
index 000000000..234911a0d
--- /dev/null
+++ b/Documentation/driver-api/soundwire/index.rst
@@ -0,0 +1,18 @@
+=======================
+SoundWire Documentation
+=======================
+
+.. toctree::
+   :maxdepth: 1
+
+   summary
+   stream
+   error_handling
+   locking
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/driver-api/soundwire/locking.rst b/Documentation/driver-api/soundwire/locking.rst
new file mode 100644
index 000000000..3a7ffb3d8
--- /dev/null
+++ b/Documentation/driver-api/soundwire/locking.rst
@@ -0,0 +1,108 @@
+=================
+SoundWire Locking
+=================
+
+This document explains locking mechanism of the SoundWire Bus. Bus uses
+following locks in order to avoid race conditions in Bus operations on
+shared resources.
+
+  - Bus lock
+
+  - Message lock
+
+Bus lock
+========
+
+SoundWire Bus lock is a mutex and is part of Bus data structure
+(sdw_bus) which is used for every Bus instance. This lock is used to
+serialize each of the following operations(s) within SoundWire Bus instance.
+
+  - Addition and removal of Slave(s), changing Slave status.
+
+  - Prepare, Enable, Disable and De-prepare stream operations.
+
+  - Access of Stream data structure.
+
+Message lock
+============
+
+SoundWire message transfer lock. This mutex is part of
+Bus data structure (sdw_bus). This lock is used to serialize the message
+transfers (read/write) within a SoundWire Bus instance.
+
+Below examples show how locks are acquired.
+
+Example 1
+---------
+
+Message transfer.
+
+  1. For every message transfer
+
+     a. Acquire Message lock.
+
+     b. Transfer message (Read/Write) to Slave1 or broadcast message on
+        Bus in case of bank switch.
+
+     c. Release Message lock
+
+     ::
+
+	+----------+                    +---------+
+	|          |                    |         |
+	|   Bus    |                    | Master  |
+	|          |                    | Driver  |
+	|          |                    |         |
+	+----+-----+                    +----+----+
+	     |                               |
+	     |     bus->ops->xfer_msg()      |
+	     <-------------------------------+   a. Acquire Message lock
+	     |                               |   b. Transfer message
+	     |                               |
+	     +------------------------------->   c. Release Message lock
+	     |    return success/error       |   d. Return success/error
+	     |                               |
+	     +                               +
+
+Example 2
+---------
+
+Prepare operation.
+
+  1. Acquire lock for Bus instance associated with Master 1.
+
+  2. For every message transfer in Prepare operation
+
+     a. Acquire Message lock.
+
+     b. Transfer message (Read/Write) to Slave1 or broadcast message on
+        Bus in case of bank switch.
+
+     c. Release Message lock.
+
+  3. Release lock for Bus instance associated with Master 1 ::
+
+	+----------+                    +---------+
+	|          |                    |         |
+	|   Bus    |                    | Master  |
+	|          |                    | Driver  |
+	|          |                    |         |
+	+----+-----+                    +----+----+
+	     |                               |
+	     |    sdw_prepare_stream()       |
+	     <-------------------------------+   1. Acquire bus lock
+	     |                               |   2. Perform stream prepare
+	     |                               |
+	     |                               |
+	     |     bus->ops->xfer_msg()      |
+	     <-------------------------------+   a. Acquire Message lock
+	     |                               |   b. Transfer message
+	     |                               |
+	     +------------------------------->   c. Release Message lock
+	     |    return success/error       |   d. Return success/error
+	     |                               |
+	     |                               |
+	     |    return success/error       |   3. Release bus lock
+	     +------------------------------->   4. Return success/error
+	     |                               |
+	     +                               +
diff --git a/Documentation/driver-api/soundwire/stream.rst b/Documentation/driver-api/soundwire/stream.rst
new file mode 100644
index 000000000..b432a2de4
--- /dev/null
+++ b/Documentation/driver-api/soundwire/stream.rst
@@ -0,0 +1,527 @@
+=========================
+Audio Stream in SoundWire
+=========================
+
+An audio stream is a logical or virtual connection created between
+
+  (1) System memory buffer(s) and Codec(s)
+
+  (2) DSP memory buffer(s) and Codec(s)
+
+  (3) FIFO(s) and Codec(s)
+
+  (4) Codec(s) and Codec(s)
+
+which is typically driven by a DMA(s) channel through the data link. An
+audio stream contains one or more channels of data. All channels within
+stream must have same sample rate and same sample size.
+
+Assume a stream with two channels (Left & Right) is opened using SoundWire
+interface. Below are some ways a stream can be represented in SoundWire.
+
+Stream Sample in memory (System memory, DSP memory or FIFOs) ::
+
+	-------------------------
+	| L | R | L | R | L | R |
+	-------------------------
+
+Example 1: Stereo Stream with L and R channels is rendered from Master to
+Slave. Both Master and Slave is using single port. ::
+
+	+---------------+                    Clock Signal  +---------------+
+	|    Master     +----------------------------------+     Slave     |
+	|   Interface   |                                  |   Interface   |
+	|               |                                  |       1       |
+	|               |                     Data Signal  |               |
+	|    L  +  R    +----------------------------------+    L  +  R    |
+	|     (Data)    |     Data Direction               |     (Data)    |
+	+---------------+  +----------------------->       +---------------+
+
+
+Example 2: Stereo Stream with L and R channels is captured from Slave to
+Master. Both Master and Slave is using single port. ::
+
+
+	+---------------+                    Clock Signal  +---------------+
+	|    Master     +----------------------------------+     Slave     |
+	|   Interface   |                                  |   Interface   |
+	|               |                                  |       1       |
+	|               |                     Data Signal  |               |
+	|    L  +  R    +----------------------------------+    L  +  R    |
+	|     (Data)    |     Data Direction               |     (Data)    |
+	+---------------+  <-----------------------+       +---------------+
+
+
+Example 3: Stereo Stream with L and R channels is rendered by Master. Each
+of the L and R channel is received by two different Slaves. Master and both
+Slaves are using single port. ::
+
+	+---------------+                    Clock Signal  +---------------+
+	|    Master     +---------+------------------------+     Slave     |
+	|   Interface   |         |                        |   Interface   |
+	|               |         |                        |       1       |
+	|               |         |           Data Signal  |               |
+	|    L  +  R    +---+------------------------------+       L       |
+	|     (Data)    |   |     |    Data Direction      |     (Data)    |
+	+---------------+   |     |   +------------->      +---------------+
+	                    |     |
+	                    |     |
+	                    |     |                        +---------------+
+	                    |     +----------------------> |     Slave     |
+	                    |                              |   Interface   |
+	                    |                              |       2       |
+	                    |                              |               |
+	                    +----------------------------> |       R       |
+	                                                   |     (Data)    |
+	                                                   +---------------+
+
+Example 4: Stereo Stream with L and R channels is rendered by
+Master. Both of the L and R channels are received by two different
+Slaves. Master and both Slaves are using single port handling
+L+R. Each Slave device processes the L + R data locally, typically
+based on static configuration or dynamic orientation, and may drive
+one or more speakers. ::
+
+	+---------------+                    Clock Signal  +---------------+
+	|    Master     +---------+------------------------+     Slave     |
+	|   Interface   |         |                        |   Interface   |
+	|               |         |                        |       1       |
+	|               |         |           Data Signal  |               |
+	|    L  +  R    +---+------------------------------+     L + R     |
+	|     (Data)    |   |     |    Data Direction      |     (Data)    |
+	+---------------+   |     |   +------------->      +---------------+
+	                    |     |
+	                    |     |
+	                    |     |                        +---------------+
+	                    |     +----------------------> |     Slave     |
+	                    |                              |   Interface   |
+	                    |                              |       2       |
+	                    |                              |               |
+	                    +----------------------------> |     L + R     |
+	                                                   |     (Data)    |
+	                                                   +---------------+
+
+Example 5: Stereo Stream with L and R channel is rendered by two different
+Ports of the Master and is received by only single Port of the Slave
+interface. ::
+
+	+--------------------+
+	|                    |
+	|     +--------------+                             +----------------+
+	|     |             ||                             |                |
+	|     |  Data Port  ||  L Channel                  |                |
+	|     |      1      |------------+                 |                |
+	|     |  L Channel  ||           |                 +-----+----+     |
+	|     |   (Data)    ||           |   L + R Channel ||    Data |     |
+	| Master  +----------+           | +---+---------> ||    Port |     |
+	| Interface          |           |                 ||     1   |     |
+	|     +--------------+           |                 ||         |     |
+	|     |             ||           |                 +----------+     |
+	|     |  Data Port  |------------+                 |                |
+	|     |      2      ||  R Channel                  |     Slave      |
+	|     |  R Channel  ||                             |   Interface    |
+	|     |   (Data)    ||                             |       1        |
+	|     +--------------+         Clock Signal        |     L  +  R    |
+	|                    +---------------------------> |      (Data)    |
+	+--------------------+                             |                |
+							   +----------------+
+
+Example 6: Stereo Stream with L and R channel is rendered by 2 Masters, each
+rendering one channel, and is received by two different Slaves, each
+receiving one channel. Both Masters and both Slaves are using single port. ::
+
+	+---------------+                    Clock Signal  +---------------+
+	|    Master     +----------------------------------+     Slave     |
+	|   Interface   |                                  |   Interface   |
+	|       1       |                                  |       1       |
+	|               |                     Data Signal  |               |
+	|       L       +----------------------------------+       L       |
+	|     (Data)    |     Data Direction               |     (Data)    |
+	+---------------+  +----------------------->       +---------------+
+
+	+---------------+                    Clock Signal  +---------------+
+	|    Master     +----------------------------------+     Slave     |
+	|   Interface   |                                  |   Interface   |
+	|       2       |                                  |       2       |
+	|               |                     Data Signal  |               |
+	|       R       +----------------------------------+       R       |
+	|     (Data)    |     Data Direction               |     (Data)    |
+	+---------------+  +----------------------->       +---------------+
+
+Example 7: Stereo Stream with L and R channel is rendered by 2
+Masters, each rendering both channels. Each Slave receives L + R. This
+is the same application as Example 4 but with Slaves placed on
+separate links. ::
+
+	+---------------+                    Clock Signal  +---------------+
+	|    Master     +----------------------------------+     Slave     |
+	|   Interface   |                                  |   Interface   |
+	|       1       |                                  |       1       |
+	|               |                     Data Signal  |               |
+	|     L + R     +----------------------------------+     L + R     |
+	|     (Data)    |     Data Direction               |     (Data)    |
+	+---------------+  +----------------------->       +---------------+
+
+	+---------------+                    Clock Signal  +---------------+
+	|    Master     +----------------------------------+     Slave     |
+	|   Interface   |                                  |   Interface   |
+	|       2       |                                  |       2       |
+	|               |                     Data Signal  |               |
+	|     L + R     +----------------------------------+     L + R     |
+	|     (Data)    |     Data Direction               |     (Data)    |
+	+---------------+  +----------------------->       +---------------+
+
+Example 8: 4-channel Stream is rendered by 2 Masters, each rendering a
+2 channels. Each Slave receives 2 channels. ::
+
+	+---------------+                    Clock Signal  +---------------+
+	|    Master     +----------------------------------+     Slave     |
+	|   Interface   |                                  |   Interface   |
+	|       1       |                                  |       1       |
+	|               |                     Data Signal  |               |
+	|    L1 + R1    +----------------------------------+    L1 + R1    |
+	|     (Data)    |     Data Direction               |     (Data)    |
+	+---------------+  +----------------------->       +---------------+
+
+	+---------------+                    Clock Signal  +---------------+
+	|    Master     +----------------------------------+     Slave     |
+	|   Interface   |                                  |   Interface   |
+	|       2       |                                  |       2       |
+	|               |                     Data Signal  |               |
+	|     L2 + R2   +----------------------------------+    L2 + R2    |
+	|     (Data)    |     Data Direction               |     (Data)    |
+	+---------------+  +----------------------->       +---------------+
+
+Note1: In multi-link cases like above, to lock, one would acquire a global
+lock and then go on locking bus instances. But, in this case the caller
+framework(ASoC DPCM) guarantees that stream operations on a card are
+always serialized. So, there is no race condition and hence no need for
+global lock.
+
+Note2: A Slave device may be configured to receive all channels
+transmitted on a link for a given Stream (Example 4) or just a subset
+of the data (Example 3). The configuration of the Slave device is not
+handled by a SoundWire subsystem API, but instead by the
+snd_soc_dai_set_tdm_slot() API. The platform or machine driver will
+typically configure which of the slots are used. For Example 4, the
+same slots would be used by all Devices, while for Example 3 the Slave
+Device1 would use e.g. Slot 0 and Slave device2 slot 1.
+
+Note3: Multiple Sink ports can extract the same information for the
+same bitSlots in the SoundWire frame, however multiple Source ports
+shall be configured with different bitSlot configurations. This is the
+same limitation as with I2S/PCM TDM usages.
+
+SoundWire Stream Management flow
+================================
+
+Stream definitions
+------------------
+
+  (1) Current stream: This is classified as the stream on which operation has
+      to be performed like prepare, enable, disable, de-prepare etc.
+
+  (2) Active stream: This is classified as the stream which is already active
+      on Bus other than current stream. There can be multiple active streams
+      on the Bus.
+
+SoundWire Bus manages stream operations for each stream getting
+rendered/captured on the SoundWire Bus. This section explains Bus operations
+done for each of the stream allocated/released on Bus. Following are the
+stream states maintained by the Bus for each of the audio stream.
+
+
+SoundWire stream states
+-----------------------
+
+Below shows the SoundWire stream states and state transition diagram. ::
+
+	+-----------+     +------------+     +----------+     +----------+
+	| ALLOCATED +---->| CONFIGURED +---->| PREPARED +---->| ENABLED  |
+	|   STATE   |     |    STATE   |     |  STATE   |     |  STATE   |
+	+-----------+     +------------+     +---+--+---+     +----+-----+
+	                                         ^  ^              ^
+				                 |  |              |
+				               __|  |___________   |
+				              |                 |  |
+	                                      v                 |  v
+	         +----------+           +-----+------+        +-+--+-----+
+	         | RELEASED |<----------+ DEPREPARED |<-------+ DISABLED |
+	         |  STATE   |           |   STATE    |        |  STATE   |
+	         +----------+           +------------+        +----------+
+
+NOTE: State transitions between ``SDW_STREAM_ENABLED`` and
+``SDW_STREAM_DISABLED`` are only relevant when then INFO_PAUSE flag is
+supported at the ALSA/ASoC level. Likewise the transition between
+``SDW_DISABLED_STATE`` and ``SDW_PREPARED_STATE`` depends on the
+INFO_RESUME flag.
+
+NOTE2: The framework implements basic state transition checks, but
+does not e.g. check if a transition from DISABLED to ENABLED is valid
+on a specific platform. Such tests need to be added at the ALSA/ASoC
+level.
+
+Stream State Operations
+-----------------------
+
+Below section explains the operations done by the Bus on Master(s) and
+Slave(s) as part of stream state transitions.
+
+SDW_STREAM_ALLOCATED
+~~~~~~~~~~~~~~~~~~~~
+
+Allocation state for stream. This is the entry state
+of the stream. Operations performed before entering in this state:
+
+  (1) A stream runtime is allocated for the stream. This stream
+      runtime is used as a reference for all the operations performed
+      on the stream.
+
+  (2) The resources required for holding stream runtime information are
+      allocated and initialized. This holds all stream related information
+      such as stream type (PCM/PDM) and parameters, Master and Slave
+      interface associated with the stream, stream state etc.
+
+After all above operations are successful, stream state is set to
+``SDW_STREAM_ALLOCATED``.
+
+Bus implements below API for allocate a stream which needs to be called once
+per stream. From ASoC DPCM framework, this stream state maybe linked to
+.startup() operation.
+
+.. code-block:: c
+
+  int sdw_alloc_stream(char * stream_name);
+
+The SoundWire core provides a sdw_startup_stream() helper function,
+typically called during a dailink .startup() callback, which performs
+stream allocation and sets the stream pointer for all DAIs
+connected to a stream.
+
+SDW_STREAM_CONFIGURED
+~~~~~~~~~~~~~~~~~~~~~
+
+Configuration state of stream. Operations performed before entering in
+this state:
+
+  (1) The resources allocated for stream information in SDW_STREAM_ALLOCATED
+      state are updated here. This includes stream parameters, Master(s)
+      and Slave(s) runtime information associated with current stream.
+
+  (2) All the Master(s) and Slave(s) associated with current stream provide
+      the port information to Bus which includes port numbers allocated by
+      Master(s) and Slave(s) for current stream and their channel mask.
+
+After all above operations are successful, stream state is set to
+``SDW_STREAM_CONFIGURED``.
+
+Bus implements below APIs for CONFIG state which needs to be called by
+the respective Master(s) and Slave(s) associated with stream. These APIs can
+only be invoked once by respective Master(s) and Slave(s). From ASoC DPCM
+framework, this stream state is linked to .hw_params() operation.
+
+.. code-block:: c
+
+  int sdw_stream_add_master(struct sdw_bus * bus,
+		struct sdw_stream_config * stream_config,
+		struct sdw_ports_config * ports_config,
+		struct sdw_stream_runtime * stream);
+
+  int sdw_stream_add_slave(struct sdw_slave * slave,
+		struct sdw_stream_config * stream_config,
+		struct sdw_ports_config * ports_config,
+		struct sdw_stream_runtime * stream);
+
+
+SDW_STREAM_PREPARED
+~~~~~~~~~~~~~~~~~~~
+
+Prepare state of stream. Operations performed before entering in this state:
+
+  (0) Steps 1 and 2 are omitted in the case of a resume operation,
+      where the bus bandwidth is known.
+
+  (1) Bus parameters such as bandwidth, frame shape, clock frequency,
+      are computed based on current stream as well as already active
+      stream(s) on Bus. Re-computation is required to accommodate current
+      stream on the Bus.
+
+  (2) Transport and port parameters of all Master(s) and Slave(s) port(s) are
+      computed for the current as well as already active stream based on frame
+      shape and clock frequency computed in step 1.
+
+  (3) Computed Bus and transport parameters are programmed in Master(s) and
+      Slave(s) registers. The banked registers programming is done on the
+      alternate bank (bank currently unused). Port(s) are enabled for the
+      already active stream(s) on the alternate bank (bank currently unused).
+      This is done in order to not disrupt already active stream(s).
+
+  (4) Once all the values are programmed, Bus initiates switch to alternate
+      bank where all new values programmed gets into effect.
+
+  (5) Ports of Master(s) and Slave(s) for current stream are prepared by
+      programming PrepareCtrl register.
+
+After all above operations are successful, stream state is set to
+``SDW_STREAM_PREPARED``.
+
+Bus implements below API for PREPARE state which needs to be called
+once per stream. From ASoC DPCM framework, this stream state is linked
+to .prepare() operation. Since the .trigger() operations may not
+follow the .prepare(), a direct transition from
+``SDW_STREAM_PREPARED`` to ``SDW_STREAM_DEPREPARED`` is allowed.
+
+.. code-block:: c
+
+  int sdw_prepare_stream(struct sdw_stream_runtime * stream);
+
+
+SDW_STREAM_ENABLED
+~~~~~~~~~~~~~~~~~~
+
+Enable state of stream. The data port(s) are enabled upon entering this state.
+Operations performed before entering in this state:
+
+  (1) All the values computed in SDW_STREAM_PREPARED state are programmed
+      in alternate bank (bank currently unused). It includes programming of
+      already active stream(s) as well.
+
+  (2) All the Master(s) and Slave(s) port(s) for the current stream are
+      enabled on alternate bank (bank currently unused) by programming
+      ChannelEn register.
+
+  (3) Once all the values are programmed, Bus initiates switch to alternate
+      bank where all new values programmed gets into effect and port(s)
+      associated with current stream are enabled.
+
+After all above operations are successful, stream state is set to
+``SDW_STREAM_ENABLED``.
+
+Bus implements below API for ENABLE state which needs to be called once per
+stream. From ASoC DPCM framework, this stream state is linked to
+.trigger() start operation.
+
+.. code-block:: c
+
+  int sdw_enable_stream(struct sdw_stream_runtime * stream);
+
+SDW_STREAM_DISABLED
+~~~~~~~~~~~~~~~~~~~
+
+Disable state of stream. The data port(s) are disabled upon exiting this state.
+Operations performed before entering in this state:
+
+  (1) All the Master(s) and Slave(s) port(s) for the current stream are
+      disabled on alternate bank (bank currently unused) by programming
+      ChannelEn register.
+
+  (2) All the current configuration of Bus and active stream(s) are programmed
+      into alternate bank (bank currently unused).
+
+  (3) Once all the values are programmed, Bus initiates switch to alternate
+      bank where all new values programmed gets into effect and port(s) associated
+      with current stream are disabled.
+
+After all above operations are successful, stream state is set to
+``SDW_STREAM_DISABLED``.
+
+Bus implements below API for DISABLED state which needs to be called once
+per stream. From ASoC DPCM framework, this stream state is linked to
+.trigger() stop operation.
+
+When the INFO_PAUSE flag is supported, a direct transition to
+``SDW_STREAM_ENABLED`` is allowed.
+
+For resume operations where ASoC will use the .prepare() callback, the
+stream can transition from ``SDW_STREAM_DISABLED`` to
+``SDW_STREAM_PREPARED``, with all required settings restored but
+without updating the bandwidth and bit allocation.
+
+.. code-block:: c
+
+  int sdw_disable_stream(struct sdw_stream_runtime * stream);
+
+
+SDW_STREAM_DEPREPARED
+~~~~~~~~~~~~~~~~~~~~~
+
+De-prepare state of stream. Operations performed before entering in this
+state:
+
+  (1) All the port(s) of Master(s) and Slave(s) for current stream are
+      de-prepared by programming PrepareCtrl register.
+
+  (2) The payload bandwidth of current stream is reduced from the total
+      bandwidth requirement of bus and new parameters calculated and
+      applied by performing bank switch etc.
+
+After all above operations are successful, stream state is set to
+``SDW_STREAM_DEPREPARED``.
+
+Bus implements below API for DEPREPARED state which needs to be called
+once per stream. ALSA/ASoC do not have a concept of 'deprepare', and
+the mapping from this stream state to ALSA/ASoC operation may be
+implementation specific.
+
+When the INFO_PAUSE flag is supported, the stream state is linked to
+the .hw_free() operation - the stream is not deprepared on a
+TRIGGER_STOP.
+
+Other implementations may transition to the ``SDW_STREAM_DEPREPARED``
+state on TRIGGER_STOP, should they require a transition through the
+``SDW_STREAM_PREPARED`` state.
+
+.. code-block:: c
+
+  int sdw_deprepare_stream(struct sdw_stream_runtime * stream);
+
+
+SDW_STREAM_RELEASED
+~~~~~~~~~~~~~~~~~~~
+
+Release state of stream. Operations performed before entering in this state:
+
+  (1) Release port resources for all Master(s) and Slave(s) port(s)
+      associated with current stream.
+
+  (2) Release Master(s) and Slave(s) runtime resources associated with
+      current stream.
+
+  (3) Release stream runtime resources associated with current stream.
+
+After all above operations are successful, stream state is set to
+``SDW_STREAM_RELEASED``.
+
+Bus implements below APIs for RELEASE state which needs to be called by
+all the Master(s) and Slave(s) associated with stream. From ASoC DPCM
+framework, this stream state is linked to .hw_free() operation.
+
+.. code-block:: c
+
+  int sdw_stream_remove_master(struct sdw_bus * bus,
+		struct sdw_stream_runtime * stream);
+  int sdw_stream_remove_slave(struct sdw_slave * slave,
+		struct sdw_stream_runtime * stream);
+
+
+The .shutdown() ASoC DPCM operation calls below Bus API to release
+stream assigned as part of ALLOCATED state.
+
+In .shutdown() the data structure maintaining stream state are freed up.
+
+.. code-block:: c
+
+  void sdw_release_stream(struct sdw_stream_runtime * stream);
+
+The SoundWire core provides a sdw_shutdown_stream() helper function,
+typically called during a dailink .shutdown() callback, which clears
+the stream pointer for all DAIS connected to a stream and releases the
+memory allocated for the stream.
+
+Not Supported
+=============
+
+1. A single port with multiple channels supported cannot be used between two
+   streams or across stream. For example a port with 4 channels cannot be used
+   to handle 2 independent stereo streams even though it's possible in theory
+   in SoundWire.
diff --git a/Documentation/driver-api/soundwire/summary.rst b/Documentation/driver-api/soundwire/summary.rst
new file mode 100644
index 000000000..01dcb954f
--- /dev/null
+++ b/Documentation/driver-api/soundwire/summary.rst
@@ -0,0 +1,208 @@
+===========================
+SoundWire Subsystem Summary
+===========================
+
+SoundWire is a new interface ratified in 2015 by the MIPI Alliance.
+SoundWire is used for transporting data typically related to audio
+functions. SoundWire interface is optimized to integrate audio devices in
+mobile or mobile inspired systems.
+
+SoundWire is a 2-pin multi-drop interface with data and clock line. It
+facilitates development of low cost, efficient, high performance systems.
+Broad level key features of SoundWire interface include:
+
+ (1) Transporting all of payload data channels, control information, and setup
+     commands over a single two-pin interface.
+
+ (2) Lower clock frequency, and hence lower power consumption, by use of DDR
+     (Dual Data Rate) data transmission.
+
+ (3) Clock scaling and optional multiple data lanes to give wide flexibility
+     in data rate to match system requirements.
+
+ (4) Device status monitoring, including interrupt-style alerts to the Master.
+
+The SoundWire protocol supports up to eleven Slave interfaces. All the
+interfaces share the common Bus containing data and clock line. Each of the
+Slaves can support up to 14 Data Ports. 13 Data Ports are dedicated to audio
+transport. Data Port0 is dedicated to transport of Bulk control information,
+each of the audio Data Ports (1..14) can support up to 8 Channels in
+transmit or receiving mode (typically fixed direction but configurable
+direction is enabled by the specification).  Bandwidth restrictions to
+~19.2..24.576Mbits/s don't however allow for 11*13*8 channels to be
+transmitted simultaneously.
+
+Below figure shows an example of connectivity between a SoundWire Master and
+two Slave devices. ::
+
+        +---------------+                                       +---------------+
+        |               |                       Clock Signal    |               |
+        |    Master     |-------+-------------------------------|    Slave      |
+        |   Interface   |       |               Data Signal     |  Interface 1  |
+        |               |-------|-------+-----------------------|               |
+        +---------------+       |       |                       +---------------+
+                                |       |
+                                |       |
+                                |       |
+                             +--+-------+--+
+                             |             |
+                             |   Slave     |
+                             | Interface 2 |
+                             |             |
+                             +-------------+
+
+
+Terminology
+===========
+
+The MIPI SoundWire specification uses the term 'device' to refer to a Master
+or Slave interface, which of course can be confusing. In this summary and
+code we use the term interface only to refer to the hardware. We follow the
+Linux device model by mapping each Slave interface connected on the bus as a
+device managed by a specific driver. The Linux SoundWire subsystem provides
+a framework to implement a SoundWire Slave driver with an API allowing
+3rd-party vendors to enable implementation-defined functionality while
+common setup/configuration tasks are handled by the bus.
+
+Bus:
+Implements SoundWire Linux Bus which handles the SoundWire protocol.
+Programs all the MIPI-defined Slave registers. Represents a SoundWire
+Master. Multiple instances of Bus may be present in a system.
+
+Slave:
+Registers as SoundWire Slave device (Linux Device). Multiple Slave devices
+can register to a Bus instance.
+
+Slave driver:
+Driver controlling the Slave device. MIPI-specified registers are controlled
+directly by the Bus (and transmitted through the Master driver/interface).
+Any implementation-defined Slave register is controlled by Slave driver. In
+practice, it is expected that the Slave driver relies on regmap and does not
+request direct register access.
+
+Programming interfaces (SoundWire Master interface Driver)
+==========================================================
+
+SoundWire Bus supports programming interfaces for the SoundWire Master
+implementation and SoundWire Slave devices. All the code uses the "sdw"
+prefix commonly used by SoC designers and 3rd party vendors.
+
+Each of the SoundWire Master interfaces needs to be registered to the Bus.
+Bus implements API to read standard Master MIPI properties and also provides
+callback in Master ops for Master driver to implement its own functions that
+provides capabilities information. DT support is not implemented at this
+time but should be trivial to add since capabilities are enabled with the
+``device_property_`` API.
+
+The Master interface along with the Master interface capabilities are
+registered based on board file, DT or ACPI.
+
+Following is the Bus API to register the SoundWire Bus:
+
+.. code-block:: c
+
+	int sdw_bus_master_add(struct sdw_bus *bus,
+				struct device *parent,
+				struct fwnode_handle)
+	{
+		sdw_master_device_add(bus, parent, fwnode);
+
+		mutex_init(&bus->lock);
+		INIT_LIST_HEAD(&bus->slaves);
+
+		/* Check ACPI for Slave devices */
+		sdw_acpi_find_slaves(bus);
+
+		/* Check DT for Slave devices */
+		sdw_of_find_slaves(bus);
+
+		return 0;
+	}
+
+This will initialize sdw_bus object for Master device. "sdw_master_ops" and
+"sdw_master_port_ops" callback functions are provided to the Bus.
+
+"sdw_master_ops" is used by Bus to control the Bus in the hardware specific
+way. It includes Bus control functions such as sending the SoundWire
+read/write messages on Bus, setting up clock frequency & Stream
+Synchronization Point (SSP). The "sdw_master_ops" structure abstracts the
+hardware details of the Master from the Bus.
+
+"sdw_master_port_ops" is used by Bus to setup the Port parameters of the
+Master interface Port. Master interface Port register map is not defined by
+MIPI specification, so Bus calls the "sdw_master_port_ops" callback
+function to do Port operations like "Port Prepare", "Port Transport params
+set", "Port enable and disable". The implementation of the Master driver can
+then perform hardware-specific configurations.
+
+Programming interfaces (SoundWire Slave Driver)
+===============================================
+
+The MIPI specification requires each Slave interface to expose a unique
+48-bit identifier, stored in 6 read-only dev_id registers. This dev_id
+identifier contains vendor and part information, as well as a field enabling
+to differentiate between identical components. An additional class field is
+currently unused. Slave driver is written for a specific vendor and part
+identifier, Bus enumerates the Slave device based on these two ids.
+Slave device and driver match is done based on these two ids . Probe
+of the Slave driver is called by Bus on successful match between device and
+driver id. A parent/child relationship is enforced between Master and Slave
+devices (the logical representation is aligned with the physical
+connectivity).
+
+The information on Master/Slave dependencies is stored in platform data,
+board-file, ACPI or DT. The MIPI Software specification defines additional
+link_id parameters for controllers that have multiple Master interfaces. The
+dev_id registers are only unique in the scope of a link, and the link_id
+unique in the scope of a controller. Both dev_id and link_id are not
+necessarily unique at the system level but the parent/child information is
+used to avoid ambiguity.
+
+.. code-block:: c
+
+	static const struct sdw_device_id slave_id[] = {
+	        SDW_SLAVE_ENTRY(0x025d, 0x700, 0),
+	        {},
+	};
+	MODULE_DEVICE_TABLE(sdw, slave_id);
+
+	static struct sdw_driver slave_sdw_driver = {
+	        .driver = {
+	                   .name = "slave_xxx",
+	                   .pm = &slave_runtime_pm,
+	                   },
+		.probe = slave_sdw_probe,
+		.remove = slave_sdw_remove,
+		.ops = &slave_slave_ops,
+		.id_table = slave_id,
+	};
+
+
+For capabilities, Bus implements API to read standard Slave MIPI properties
+and also provides callback in Slave ops for Slave driver to implement own
+function that provides capabilities information. Bus needs to know a set of
+Slave capabilities to program Slave registers and to control the Bus
+reconfigurations.
+
+Future enhancements to be done
+==============================
+
+ (1) Bulk Register Access (BRA) transfers.
+
+
+ (2) Multiple data lane support.
+
+Links
+=====
+
+SoundWire MIPI specification 1.1 is available at:
+https://members.mipi.org/wg/All-Members/document/70290
+
+SoundWire MIPI DisCo (Discovery and Configuration) specification is
+available at:
+https://www.mipi.org/specifications/mipi-disco-soundwire
+
+(publicly accessible with registration or directly accessible to MIPI
+members)
+
+MIPI Alliance Manufacturer ID Page: mid.mipi.org