Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 226 insertions, 0 deletions

diff --git a/Documentation/livepatch/shadow-vars.rst b/Documentation/livepatch/shadow-vars.rst
new file mode 100644
index 000000000..7a7098bfb
--- /dev/null
+++ b/Documentation/livepatch/shadow-vars.rst
@@ -0,0 +1,226 @@
+================
+Shadow Variables
+================
+
+Shadow variables are a simple way for livepatch modules to associate
+additional "shadow" data with existing data structures.  Shadow data is
+allocated separately from parent data structures, which are left
+unmodified.  The shadow variable API described in this document is used
+to allocate/add and remove/free shadow variables to/from their parents.
+
+The implementation introduces a global, in-kernel hashtable that
+associates pointers to parent objects and a numeric identifier of the
+shadow data.  The numeric identifier is a simple enumeration that may be
+used to describe shadow variable version, class or type, etc.  More
+specifically, the parent pointer serves as the hashtable key while the
+numeric id subsequently filters hashtable queries.  Multiple shadow
+variables may attach to the same parent object, but their numeric
+identifier distinguishes between them.
+
+
+1. Brief API summary
+====================
+
+(See the full API usage docbook notes in livepatch/shadow.c.)
+
+A hashtable references all shadow variables.  These references are
+stored and retrieved through a <obj, id> pair.
+
+* The klp_shadow variable data structure encapsulates both tracking
+  meta-data and shadow-data:
+
+  - meta-data
+
+    - obj - pointer to parent object
+    - id - data identifier
+
+  - data[] - storage for shadow data
+
+It is important to note that the klp_shadow_alloc() and
+klp_shadow_get_or_alloc() are zeroing the variable by default.
+They also allow to call a custom constructor function when a non-zero
+value is needed. Callers should provide whatever mutual exclusion
+is required.
+
+Note that the constructor is called under klp_shadow_lock spinlock. It allows
+to do actions that can be done only once when a new variable is allocated.
+
+* klp_shadow_get() - retrieve a shadow variable data pointer
+  - search hashtable for <obj, id> pair
+
+* klp_shadow_alloc() - allocate and add a new shadow variable
+  - search hashtable for <obj, id> pair
+
+  - if exists
+
+    - WARN and return NULL
+
+  - if <obj, id> doesn't already exist
+
+    - allocate a new shadow variable
+    - initialize the variable using a custom constructor and data when provided
+    - add <obj, id> to the global hashtable
+
+* klp_shadow_get_or_alloc() - get existing or alloc a new shadow variable
+  - search hashtable for <obj, id> pair
+
+  - if exists
+
+    - return existing shadow variable
+
+  - if <obj, id> doesn't already exist
+
+    - allocate a new shadow variable
+    - initialize the variable using a custom constructor and data when provided
+    - add <obj, id> pair to the global hashtable
+
+* klp_shadow_free() - detach and free a <obj, id> shadow variable
+  - find and remove a <obj, id> reference from global hashtable
+
+    - if found
+
+      - call destructor function if defined
+      - free shadow variable
+
+* klp_shadow_free_all() - detach and free all <_, id> shadow variables
+  - find and remove any <_, id> references from global hashtable
+
+    - if found
+
+      - call destructor function if defined
+      - free shadow variable
+
+
+2. Use cases
+============
+
+(See the example shadow variable livepatch modules in samples/livepatch/
+for full working demonstrations.)
+
+For the following use-case examples, consider commit 1d147bfa6429
+("mac80211: fix AP powersave TX vs.  wakeup race"), which added a
+spinlock to net/mac80211/sta_info.h :: struct sta_info.  Each use-case
+example can be considered a stand-alone livepatch implementation of this
+fix.
+
+
+Matching parent's lifecycle
+---------------------------
+
+If parent data structures are frequently created and destroyed, it may
+be easiest to align their shadow variables lifetimes to the same
+allocation and release functions.  In this case, the parent data
+structure is typically allocated, initialized, then registered in some
+manner.  Shadow variable allocation and setup can then be considered
+part of the parent's initialization and should be completed before the
+parent "goes live" (ie, any shadow variable get-API requests are made
+for this <obj, id> pair.)
+
+For commit 1d147bfa6429, when a parent sta_info structure is allocated,
+allocate a shadow copy of the ps_lock pointer, then initialize it::
+
+  #define PS_LOCK 1
+  struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
+				  const u8 *addr, gfp_t gfp)
+  {
+	struct sta_info *sta;
+	spinlock_t *ps_lock;
+
+	/* Parent structure is created */
+	sta = kzalloc(sizeof(*sta) + hw->sta_data_size, gfp);
+
+	/* Attach a corresponding shadow variable, then initialize it */
+	ps_lock = klp_shadow_alloc(sta, PS_LOCK, sizeof(*ps_lock), gfp,
+				   NULL, NULL);
+	if (!ps_lock)
+		goto shadow_fail;
+	spin_lock_init(ps_lock);
+	...
+
+When requiring a ps_lock, query the shadow variable API to retrieve one
+for a specific struct sta_info:::
+
+  void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta)
+  {
+	spinlock_t *ps_lock;
+
+	/* sync with ieee80211_tx_h_unicast_ps_buf */
+	ps_lock = klp_shadow_get(sta, PS_LOCK);
+	if (ps_lock)
+		spin_lock(ps_lock);
+	...
+
+When the parent sta_info structure is freed, first free the shadow
+variable::
+
+  void sta_info_free(struct ieee80211_local *local, struct sta_info *sta)
+  {
+	klp_shadow_free(sta, PS_LOCK, NULL);
+	kfree(sta);
+	...
+
+
+In-flight parent objects
+------------------------
+
+Sometimes it may not be convenient or possible to allocate shadow
+variables alongside their parent objects.  Or a livepatch fix may
+require shadow variables for only a subset of parent object instances.
+In these cases, the klp_shadow_get_or_alloc() call can be used to attach
+shadow variables to parents already in-flight.
+
+For commit 1d147bfa6429, a good spot to allocate a shadow spinlock is
+inside ieee80211_sta_ps_deliver_wakeup()::
+
+  int ps_lock_shadow_ctor(void *obj, void *shadow_data, void *ctor_data)
+  {
+	spinlock_t *lock = shadow_data;
+
+	spin_lock_init(lock);
+	return 0;
+  }
+
+  #define PS_LOCK 1
+  void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta)
+  {
+	spinlock_t *ps_lock;
+
+	/* sync with ieee80211_tx_h_unicast_ps_buf */
+	ps_lock = klp_shadow_get_or_alloc(sta, PS_LOCK,
+			sizeof(*ps_lock), GFP_ATOMIC,
+			ps_lock_shadow_ctor, NULL);
+
+	if (ps_lock)
+		spin_lock(ps_lock);
+	...
+
+This usage will create a shadow variable, only if needed, otherwise it
+will use one that was already created for this <obj, id> pair.
+
+Like the previous use-case, the shadow spinlock needs to be cleaned up.
+A shadow variable can be freed just before its parent object is freed,
+or even when the shadow variable itself is no longer required.
+
+
+Other use-cases
+---------------
+
+Shadow variables can also be used as a flag indicating that a data
+structure was allocated by new, livepatched code.  In this case, it
+doesn't matter what data value the shadow variable holds, its existence
+suggests how to handle the parent object.
+
+
+3. References
+=============
+
+* https://github.com/dynup/kpatch
+
+  The livepatch implementation is based on the kpatch version of shadow
+  variables.
+
+* http://files.mkgnu.net/files/dynamos/doc/papers/dynamos_eurosys_07.pdf
+
+  Dynamic and Adaptive Updates of Non-Quiescent Subsystems in Commodity
+  Operating System Kernels (Kritis Makris, Kyung Dong Ryu 2007) presented
+  a datatype update technique called "shadow data structures".