Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 167 insertions, 0 deletions

diff --git a/Documentation/translations/zh_CN/dev-tools/gdb-kernel-debugging.rst b/Documentation/translations/zh_CN/dev-tools/gdb-kernel-debugging.rst
new file mode 100644
index 000000000..17b5ce85a
--- /dev/null
+++ b/Documentation/translations/zh_CN/dev-tools/gdb-kernel-debugging.rst
@@ -0,0 +1,167 @@
+.. highlight:: none
+
+.. include:: ../disclaimer-zh_CN.rst
+
+:Original: Documentation/dev-tools/gdb-kernel-debugging.rst
+:Translator: 高超 gao chao <gaochao49@huawei.com>
+
+通过gdb调试内核和模块
+=====================
+
+Kgdb内核调试器、QEMU等虚拟机管理程序或基于JTAG的硬件接口，支持在运行时使用gdb
+调试Linux内核及其模块。Gdb提供了一个强大的python脚本接口，内核也提供了一套
+辅助脚本以简化典型的内核调试步骤。本文档为如何启用和使用这些脚本提供了一个简要的教程。
+此教程基于QEMU/KVM虚拟机，但文中示例也适用于其他gdb stub。
+
+
+环境配置要求
+------------
+
+- gdb 7.2+ (推荐版本: 7.4+) 且开启python支持 (通常发行版上都已支持)
+
+设置
+----
+
+- 创建一个QEMU/KVM的linux虚拟机（详情请参考 www.linux-kvm.org 和 www.qemu.org ）。
+  对于交叉开发，https://landley.net/aboriginal/bin 提供了一些镜像和工具链，
+  可以帮助搭建交叉开发环境。
+
+- 编译内核时开启CONFIG_GDB_SCRIPTS，关闭CONFIG_DEBUG_INFO_REDUCED。
+  如果架构支持CONFIG_FRAME_POINTER，请保持开启。
+
+- 在guest环境上安装该内核。如有必要，通过在内核command line中添加“nokaslr”来关闭KASLR。
+  此外，QEMU允许通过-kernel、-append、-initrd这些命令行选项直接启动内核。
+  但这通常仅在不依赖内核模块时才有效。有关此模式的更多详细信息，请参阅QEMU文档。
+  在这种情况下，如果架构支持KASLR，应该在禁用CONFIG_RANDOMIZE_BASE的情况下构建内核。
+
+- 启用QEMU/KVM的gdb stub，可以通过如下方式实现
+
+    - 在VM启动时，通过在QEMU命令行中添加“-s”参数
+
+  或
+
+    - 在运行时通过从QEMU监视控制台发送“gdbserver”
+
+- 切换到/path/to/linux-build(内核源码编译)目录
+
+- 启动gdb：gdb vmlinux
+
+  注意：某些发行版可能会将gdb脚本的自动加载限制在已知的安全目录中。
+  如果gdb报告拒绝加载vmlinux-gdb.py（相关命令找不到），请将::
+
+    add-auto-load-safe-path /path/to/linux-build
+
+  添加到~/.gdbinit。更多详细信息，请参阅gdb帮助信息。
+
+- 连接到已启动的guest环境::
+
+    (gdb) target remote :1234
+
+
+使用Linux提供的gdb脚本的示例
+----------------------------
+
+- 加载模块（以及主内核）符号::
+
+    (gdb) lx-symbols
+    loading vmlinux
+    scanning for modules in /home/user/linux/build
+    loading @0xffffffffa0020000: /home/user/linux/build/net/netfilter/xt_tcpudp.ko
+    loading @0xffffffffa0016000: /home/user/linux/build/net/netfilter/xt_pkttype.ko
+    loading @0xffffffffa0002000: /home/user/linux/build/net/netfilter/xt_limit.ko
+    loading @0xffffffffa00ca000: /home/user/linux/build/net/packet/af_packet.ko
+    loading @0xffffffffa003c000: /home/user/linux/build/fs/fuse/fuse.ko
+    ...
+    loading @0xffffffffa0000000: /home/user/linux/build/drivers/ata/ata_generic.ko
+
+- 对一些尚未加载的模块中的函数函数设置断点，例如::
+
+    (gdb) b btrfs_init_sysfs
+    Function "btrfs_init_sysfs" not defined.
+    Make breakpoint pending on future shared library load? (y or [n]) y
+    Breakpoint 1 (btrfs_init_sysfs) pending.
+
+- 继续执行::
+
+    (gdb) c
+
+- 加载模块并且能观察到正在加载的符号以及断点命中::
+
+    loading @0xffffffffa0034000: /home/user/linux/build/lib/libcrc32c.ko
+    loading @0xffffffffa0050000: /home/user/linux/build/lib/lzo/lzo_compress.ko
+    loading @0xffffffffa006e000: /home/user/linux/build/lib/zlib_deflate/zlib_deflate.ko
+    loading @0xffffffffa01b1000: /home/user/linux/build/fs/btrfs/btrfs.ko
+
+    Breakpoint 1, btrfs_init_sysfs () at /home/user/linux/fs/btrfs/sysfs.c:36
+    36              btrfs_kset = kset_create_and_add("btrfs", NULL, fs_kobj);
+
+- 查看内核的日志缓冲区::
+
+    (gdb) lx-dmesg
+    [     0.000000] Initializing cgroup subsys cpuset
+    [     0.000000] Initializing cgroup subsys cpu
+    [     0.000000] Linux version 3.8.0-rc4-dbg+ (...
+    [     0.000000] Command line: root=/dev/sda2 resume=/dev/sda1 vga=0x314
+    [     0.000000] e820: BIOS-provided physical RAM map:
+    [     0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
+    [     0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
+    ....
+
+- 查看当前task struct结构体的字段（仅x86和arm64支持）::
+
+    (gdb) p $lx_current().pid
+    $1 = 4998
+    (gdb) p $lx_current().comm
+    $2 = "modprobe\000\000\000\000\000\000\000"
+
+- 对当前或指定的CPU使用per-cpu函数::
+
+    (gdb) p $lx_per_cpu("runqueues").nr_running
+    $3 = 1
+    (gdb) p $lx_per_cpu("runqueues", 2).nr_running
+    $4 = 0
+
+- 使用container_of查看更多hrtimers信息::
+
+    (gdb) set $next = $lx_per_cpu("hrtimer_bases").clock_base[0].active.next
+    (gdb) p *$container_of($next, "struct hrtimer", "node")
+    $5 = {
+      node = {
+        node = {
+          __rb_parent_color = 18446612133355256072,
+          rb_right = 0x0 <irq_stack_union>,
+          rb_left = 0x0 <irq_stack_union>
+        },
+        expires = {
+          tv64 = 1835268000000
+        }
+      },
+      _softexpires = {
+        tv64 = 1835268000000
+      },
+      function = 0xffffffff81078232 <tick_sched_timer>,
+      base = 0xffff88003fd0d6f0,
+      state = 1,
+      start_pid = 0,
+      start_site = 0xffffffff81055c1f <hrtimer_start_range_ns+20>,
+      start_comm = "swapper/2\000\000\000\000\000\000"
+    }
+
+
+命令和辅助调试功能列表
+----------------------
+
+命令和辅助调试功能可能会随着时间的推移而改进，此文显示的是初始版本的部分示例::
+
+ (gdb) apropos lx
+ function lx_current -- Return current task
+ function lx_module -- Find module by name and return the module variable
+ function lx_per_cpu -- Return per-cpu variable
+ function lx_task_by_pid -- Find Linux task by PID and return the task_struct variable
+ function lx_thread_info -- Calculate Linux thread_info from task variable
+ lx-dmesg -- Print Linux kernel log buffer
+ lx-lsmod -- List currently loaded modules
+ lx-symbols -- (Re-)load symbols of Linux kernel and currently loaded modules
+
+可以通过“help <command-name>”或“help function <function-name>”命令
+获取指定命令或指定调试功能的更多详细信息。