Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 733 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
new file mode 100644
index 000000000..b07b71307
--- /dev/null
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -0,0 +1,733 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r7s72100 SoC
+ *
+ * Copyright (C) 2013-14 Renesas Solutions Corp.
+ * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
+ */
+
+#include <dt-bindings/clock/r7s72100-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,r7s72100";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+	};
+
+	/* Fixed factor clocks */
+	b_clk: b {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cpg_clocks R7S72100_CLK_PLL>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clock-frequency = <400000000>;
+			clocks = <&cpg_clocks R7S72100_CLK_I>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	/* External clocks */
+	extal_clk: extal {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		/* If clk present, value must be set by board */
+		clock-frequency = <0>;
+	};
+
+	p0_clk: p0 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cpg_clocks R7S72100_CLK_PLL>;
+		clock-mult = <1>;
+		clock-div = <12>;
+	};
+
+	p1_clk: p1 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cpg_clocks R7S72100_CLK_PLL>;
+		clock-mult = <1>;
+		clock-div = <6>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts-extended = <&gic GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	rtc_x1_clk: rtc_x1 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		/* If clk present, value must be set by board to 32678 */
+		clock-frequency = <0>;
+	};
+
+	rtc_x3_clk: rtc_x3 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		/* If clk present, value must be set by board to 4000000 */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		L2: cache-controller@3ffff000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x3ffff000 0x1000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			arm,early-bresp-disable;
+			arm,full-line-zero-disable;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		scif0: serial@e8007000 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe8007000 64>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif1: serial@e8007800 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe8007800 64>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif2: serial@e8008000 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe8008000 64>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif3: serial@e8008800 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe8008800 64>;
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif4: serial@e8009000 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe8009000 64>;
+			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif5: serial@e8009800 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe8009800 64>;
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif6: serial@e800a000 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe800a000 64>;
+			interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif7: serial@e800a800 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe800a800 64>;
+			interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		spi0: spi@e800c800 {
+			compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+			reg = <0xe800c800 0x24>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&mstp10_clks R7S72100_CLK_SPI0>;
+			power-domains = <&cpg_clocks>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@e800d000 {
+			compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+			reg = <0xe800d000 0x24>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&mstp10_clks R7S72100_CLK_SPI1>;
+			power-domains = <&cpg_clocks>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@e800d800 {
+			compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+			reg = <0xe800d800 0x24>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&mstp10_clks R7S72100_CLK_SPI2>;
+			power-domains = <&cpg_clocks>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi3: spi@e800e000 {
+			compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+			reg = <0xe800e000 0x24>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&mstp10_clks R7S72100_CLK_SPI3>;
+			power-domains = <&cpg_clocks>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi4: spi@e800e800 {
+			compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+			reg = <0xe800e800 0x24>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&mstp10_clks R7S72100_CLK_SPI4>;
+			power-domains = <&cpg_clocks>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usbhs0: usb@e8010000 {
+			compatible = "renesas,usbhs-r7s72100", "renesas,rza1-usbhs";
+			reg = <0xe8010000 0x1a0>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R7S72100_CLK_USB0>;
+			renesas,buswait = <4>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		usbhs1: usb@e8207000 {
+			compatible = "renesas,usbhs-r7s72100", "renesas,rza1-usbhs";
+			reg = <0xe8207000 0x1a0>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R7S72100_CLK_USB1>;
+			renesas,buswait = <4>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		mmcif: mmc@e804c800 {
+			compatible = "renesas,mmcif-r7s72100", "renesas,sh-mmcif";
+			reg = <0xe804c800 0x80>;
+			interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R7S72100_CLK_MMCIF>;
+			power-domains = <&cpg_clocks>;
+			reg-io-width = <4>;
+			bus-width = <8>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@e804e000 {
+			compatible = "renesas,sdhi-r7s72100";
+			reg = <0xe804e000 0x100>;
+			interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&mstp12_clks R7S72100_CLK_SDHI00>,
+				 <&mstp12_clks R7S72100_CLK_SDHI01>;
+			clock-names = "core", "cd";
+			power-domains = <&cpg_clocks>;
+			cap-sd-highspeed;
+			cap-sdio-irq;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@e804e800 {
+			compatible = "renesas,sdhi-r7s72100";
+			reg = <0xe804e800 0x100>;
+			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&mstp12_clks R7S72100_CLK_SDHI10>,
+				 <&mstp12_clks R7S72100_CLK_SDHI11>;
+			clock-names = "core", "cd";
+			power-domains = <&cpg_clocks>;
+			cap-sd-highspeed;
+			cap-sdio-irq;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@e8201000 {
+			compatible = "arm,pl390";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0xe8201000 0x1000>,
+				<0xe8202000 0x1000>;
+		};
+
+		ether: ethernet@e8203000 {
+			compatible = "renesas,ether-r7s72100";
+			reg = <0xe8203000 0x800>,
+			      <0xe8204800 0x200>;
+			interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R7S72100_CLK_ETHER>;
+			power-domains = <&cpg_clocks>;
+			phy-mode = "mii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ceu: camera@e8210000 {
+			reg = <0xe8210000 0x3000>;
+			compatible = "renesas,r7s72100-ceu";
+			interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp6_clks R7S72100_CLK_CEU>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		wdt: watchdog@fcfe0000 {
+			compatible = "renesas,r7s72100-wdt", "renesas,rza-wdt";
+			reg = <0xfcfe0000 0x6>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&p0_clk>;
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks@fcfe0000 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-cpg-clocks",
+				     "renesas,rz-cpg-clocks";
+			reg = <0xfcfe0000 0x18>;
+			clocks = <&extal_clk>, <&usb_x1_clk>;
+			clock-output-names = "pll", "i", "g";
+			#power-domain-cells = <0>;
+		};
+
+		/* MSTP clocks */
+		mstp3_clks: mstp3_clks@fcfe0420 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0420 4>;
+			clocks = <&p0_clk>;
+			clock-indices = <R7S72100_CLK_MTU2>;
+			clock-output-names = "mtu2";
+		};
+
+		mstp4_clks: mstp4_clks@fcfe0424 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0424 4>;
+			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>,
+				 <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>;
+			clock-indices = <
+				R7S72100_CLK_SCIF0 R7S72100_CLK_SCIF1 R7S72100_CLK_SCIF2 R7S72100_CLK_SCIF3
+				R7S72100_CLK_SCIF4 R7S72100_CLK_SCIF5 R7S72100_CLK_SCIF6 R7S72100_CLK_SCIF7
+			>;
+			clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7";
+		};
+
+		mstp5_clks: mstp5_clks@fcfe0428 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0428 4>;
+			clocks = <&p0_clk>, <&p0_clk>;
+			clock-indices = <R7S72100_CLK_OSTM0 R7S72100_CLK_OSTM1>;
+			clock-output-names = "ostm0", "ostm1";
+		};
+
+		mstp6_clks: mstp6_clks@fcfe042c {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe042c 4>;
+			clocks = <&b_clk>, <&p0_clk>;
+			clock-indices = <R7S72100_CLK_CEU R7S72100_CLK_RTC>;
+			clock-output-names = "ceu", "rtc";
+		};
+
+		mstp7_clks: mstp7_clks@fcfe0430 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0430 4>;
+			clocks = <&b_clk>, <&p1_clk>, <&p1_clk>;
+			clock-indices = <R7S72100_CLK_ETHER R7S72100_CLK_USB0 R7S72100_CLK_USB1>;
+			clock-output-names = "ether", "usb0", "usb1";
+		};
+
+		mstp8_clks: mstp8_clks@fcfe0434 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0434 4>;
+			clocks = <&p1_clk>;
+			clock-indices = <R7S72100_CLK_MMCIF>;
+			clock-output-names = "mmcif";
+		};
+
+		mstp9_clks: mstp9_clks@fcfe0438 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0438 4>;
+			clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>, <&b_clk>, <&b_clk>;
+			clock-indices = <
+				R7S72100_CLK_I2C0 R7S72100_CLK_I2C1 R7S72100_CLK_I2C2 R7S72100_CLK_I2C3
+				R7S72100_CLK_SPIBSC0 R7S72100_CLK_SPIBSC1
+			>;
+			clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3", "spibsc0", "spibsc1";
+		};
+
+		mstp10_clks: mstp10_clks@fcfe043c {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe043c 4>;
+			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>,
+				 <&p1_clk>;
+			clock-indices = <
+				R7S72100_CLK_SPI0 R7S72100_CLK_SPI1 R7S72100_CLK_SPI2 R7S72100_CLK_SPI3
+				R7S72100_CLK_SPI4
+			>;
+			clock-output-names = "spi0", "spi1", "spi2", "spi3", "spi4";
+		};
+		mstp12_clks: mstp12_clks@fcfe0444 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0444 4>;
+			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>;
+			clock-indices = <
+				R7S72100_CLK_SDHI00 R7S72100_CLK_SDHI01
+				R7S72100_CLK_SDHI10 R7S72100_CLK_SDHI11
+			>;
+			clock-output-names = "sdhi00", "sdhi01", "sdhi10", "sdhi11";
+		};
+
+		pinctrl: pinctrl@fcfe3000 {
+			compatible = "renesas,r7s72100-ports";
+
+			reg = <0xfcfe3000 0x4230>;
+
+			port0: gpio-0 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 0 6>;
+			};
+
+			port1: gpio-1 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 16 16>;
+			};
+
+			port2: gpio-2 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 32 16>;
+			};
+
+			port3: gpio-3 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 48 16>;
+			};
+
+			port4: gpio-4 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 64 16>;
+			};
+
+			port5: gpio-5 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 80 11>;
+			};
+
+			port6: gpio-6 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 96 16>;
+			};
+
+			port7: gpio-7 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 112 16>;
+			};
+
+			port8: gpio-8 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 128 16>;
+			};
+
+			port9: gpio-9 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 144 8>;
+			};
+
+			port10: gpio-10 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 160 16>;
+			};
+
+			port11: gpio-11 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 176 16>;
+			};
+		};
+
+		ostm0: timer@fcfec000 {
+			compatible = "renesas,r7s72100-ostm", "renesas,ostm";
+			reg = <0xfcfec000 0x30>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&mstp5_clks R7S72100_CLK_OSTM0>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		ostm1: timer@fcfec400 {
+			compatible = "renesas,r7s72100-ostm", "renesas,ostm";
+			reg = <0xfcfec400 0x30>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&mstp5_clks R7S72100_CLK_OSTM1>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@fcfee000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+			reg = <0xfcfee000 0x44>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
+			clock-frequency = <100000>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@fcfee400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+			reg = <0xfcfee400 0x44>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
+			clock-frequency = <100000>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@fcfee800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+			reg = <0xfcfee800 0x44>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
+			clock-frequency = <100000>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@fcfeec00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+			reg = <0xfcfeec00 0x44>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
+			clock-frequency = <100000>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		irqc: interrupt-controller@fcfef800 {
+			compatible = "renesas,r7s72100-irqc",
+				     "renesas,rza1-irqc";
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0xfcfef800 0x6>;
+			interrupt-map =
+				<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <7 0>;
+		};
+
+		mtu2: timer@fcff0000 {
+			compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
+			reg = <0xfcff0000 0x400>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tgi0a";
+			clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		rtc: rtc@fcff1000 {
+			compatible = "renesas,r7s72100-rtc", "renesas,sh-rtc";
+			reg = <0xfcff1000 0x2e>;
+			interrupts = <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "alarm", "period", "carry";
+			clocks = <&mstp6_clks R7S72100_CLK_RTC>, <&rtc_x1_clk>,
+				 <&rtc_x3_clk>, <&extal_clk>;
+			clock-names = "fck", "rtc_x1", "rtc_x3", "extal";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+	};
+
+	usb_x1_clk: usb_x1 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		/* If clk present, value must be set by board */
+		clock-frequency = <0>;
+	};
+};