Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1253 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
new file mode 100644
index 000000000..7d3f3300f
--- /dev/null
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -0,0 +1,1253 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/clock/sun9i-a80-ccu.h>
+#include <dt-bindings/clock/sun9i-a80-de.h>
+#include <dt-bindings/clock/sun9i-a80-usb.h>
+#include <dt-bindings/reset/sun9i-a80-ccu.h>
+#include <dt-bindings/reset/sun9i-a80-de.h>
+#include <dt-bindings/reset/sun9i-a80-usb.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		ethernet0 = &gmac;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x1>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x3>;
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x100>;
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x101>;
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x102>;
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x103>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/*
+		 * map 64 bit address range down to 32 bits,
+		 * as the peripherals are all under 512MB.
+		 */
+		ranges = <0 0 0 0x20000000>;
+
+		/*
+		 * This clock is actually configurable from the PRCM address
+		 * space. The external 24M oscillator can be turned off, and
+		 * the clock switched to an internal 16M RC oscillator. Under
+		 * normal operation there's no reason to do this, and the
+		 * default is to use the external good one, so just model this
+		 * as a fixed clock. Also it is not entirely clear if the
+		 * osc24M mux in the PRCM affects the entire clock tree, which
+		 * would also throw all the PLL clock rates off, or just the
+		 * downstream clocks in the PRCM.
+		 */
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		/*
+		 * The 32k clock is from an external source, normally the
+		 * AC100 codec/RTC chip. This serves as a placeholder for
+		 * board dts files to specify the source.
+		 */
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <1>;
+			clock-mult = <1>;
+			clock-output-names = "osc32k";
+		};
+
+		/*
+		 * The following two are dummy clocks, placeholders
+		 * used in the gmac_tx clock. The gmac driver will
+		 * choose one parent depending on the PHY interface
+		 * mode, using clk_set_rate auto-reparenting.
+		 *
+		 * The actual TX clock rate is not controlled by the
+		 * gmac_tx clock.
+		 */
+		mii_phy_tx_clk: mii_phy_tx_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+			clock-output-names = "mii_phy_tx";
+		};
+
+		gmac_int_tx_clk: gmac_int_tx_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			clock-output-names = "gmac_int_tx";
+		};
+
+		gmac_tx_clk: clk@800030 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-gmac-clk";
+			reg = <0x00800030 0x4>;
+			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+			clock-output-names = "gmac_tx";
+		};
+
+		cpus_clk: clk@8001410 {
+			compatible = "allwinner,sun9i-a80-cpus-clk";
+			reg = <0x08001410 0x4>;
+			#clock-cells = <0>;
+			clocks = <&osc32k>, <&osc24M>,
+				 <&ccu CLK_PLL_PERIPH0>,
+				 <&ccu CLK_PLL_AUDIO>;
+			clock-output-names = "cpus";
+		};
+
+		ahbs: clk-ahbs {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&cpus_clk>;
+			clock-output-names = "ahbs";
+		};
+
+		apbs: clk@800141c {
+			compatible = "allwinner,sun8i-a23-apb0-clk";
+			reg = <0x0800141c 0x4>;
+			#clock-cells = <0>;
+			clocks = <&ahbs>;
+			clock-output-names = "apbs";
+		};
+
+		apbs_gates: clk@8001428 {
+			compatible = "allwinner,sun9i-a80-apbs-gates-clk";
+			reg = <0x08001428 0x4>;
+			#clock-cells = <1>;
+			clocks = <&apbs>;
+			clock-indices = <0>, <1>,
+					<2>, <3>,
+					<4>, <5>,
+					<6>, <7>,
+					<12>, <13>,
+					<16>, <17>,
+					<18>, <20>;
+			clock-output-names = "apbs_pio", "apbs_ir",
+					"apbs_timer", "apbs_rsb",
+					"apbs_uart", "apbs_1wire",
+					"apbs_i2c0", "apbs_i2c1",
+					"apbs_ps2_0", "apbs_ps2_1",
+					"apbs_dma", "apbs_i2s0",
+					"apbs_i2s1", "apbs_twd";
+		};
+
+		r_1wire_clk: clk@8001450 {
+			reg = <0x08001450 0x4>;
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			clocks = <&osc32k>, <&osc24M>;
+			clock-output-names = "r_1wire";
+		};
+
+		r_ir_clk: clk@8001454 {
+			reg = <0x08001454 0x4>;
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			clocks = <&osc32k>, <&osc24M>;
+			clock-output-names = "r_ir";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun9i-a80-display-engine";
+		allwinner,pipelines = <&fe0>, <&fe1>;
+		status = "disabled";
+	};
+
+	soc@20000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/*
+		 * map 64 bit address range down to 32 bits,
+		 * as the peripherals are all under 512MB.
+		 */
+		ranges = <0 0 0 0x20000000>;
+
+		sram_b: sram@20000 {
+			/* 256 KiB secure SRAM at 0x20000 */
+			compatible = "mmio-sram";
+			reg = <0x00020000 0x40000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x00020000 0x40000>;
+
+			smp-sram@1000 {
+				/*
+				 * This is checked by BROM to determine if
+				 * cpu0 should jump to SMP entry vector
+				 */
+				compatible = "allwinner,sun9i-a80-smp-sram";
+				reg = <0x1000 0x8>;
+			};
+		};
+
+		gmac: ethernet@830000 {
+			compatible = "allwinner,sun7i-a20-gmac";
+			reg = <0x00830000 0x1054>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_BUS_GMAC>, <&gmac_tx_clk>;
+			clock-names = "stmmaceth", "allwinner_gmac_tx";
+			resets = <&ccu RST_BUS_GMAC>;
+			reset-names = "stmmaceth";
+			snps,pbl = <2>;
+			snps,fixed-burst;
+			snps,force_sf_dma_mode;
+			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		ehci0: usb@a00000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a00000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI0>;
+			resets = <&usb_clocks RST_USB0_HCI>;
+			phys = <&usbphy1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@a00400 {
+			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+			reg = <0x00a00400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI0>,
+				 <&usb_clocks CLK_USB_OHCI0>;
+			resets = <&usb_clocks RST_USB0_HCI>;
+			phys = <&usbphy1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy1: phy@a00800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a00800 0x4>;
+			clocks = <&usb_clocks CLK_USB0_PHY>;
+			clock-names = "phy";
+			resets = <&usb_clocks RST_USB0_PHY>;
+			reset-names = "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		ehci1: usb@a01000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a01000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI1>;
+			resets = <&usb_clocks RST_USB1_HCI>;
+			phys = <&usbphy2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy2: phy@a01800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a01800 0x4>;
+			clocks = <&usb_clocks CLK_USB1_PHY>,
+				 <&usb_clocks CLK_USB_HSIC>,
+				 <&usb_clocks CLK_USB1_HSIC>;
+			clock-names = "phy",
+				      "hsic_12M",
+				      "hsic_480M";
+			resets = <&usb_clocks RST_USB1_PHY>,
+				 <&usb_clocks RST_USB1_HSIC>;
+			reset-names = "phy",
+				      "hsic";
+			status = "disabled";
+			#phy-cells = <0>;
+			/* usb1 is always used with HSIC */
+			phy_type = "hsic";
+		};
+
+		ehci2: usb@a02000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a02000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI2>;
+			resets = <&usb_clocks RST_USB2_HCI>;
+			phys = <&usbphy3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@a02400 {
+			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+			reg = <0x00a02400 0x100>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI2>,
+				 <&usb_clocks CLK_USB_OHCI2>;
+			resets = <&usb_clocks RST_USB2_HCI>;
+			phys = <&usbphy3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy3: phy@a02800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a02800 0x4>;
+			clocks = <&usb_clocks CLK_USB2_PHY>,
+				 <&usb_clocks CLK_USB_HSIC>,
+				 <&usb_clocks CLK_USB2_HSIC>;
+			clock-names = "phy",
+				      "hsic_12M",
+				      "hsic_480M";
+			resets = <&usb_clocks RST_USB2_PHY>,
+				 <&usb_clocks RST_USB2_HSIC>;
+			reset-names = "phy",
+				      "hsic";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		usb_clocks: clock@a08000 {
+			compatible = "allwinner,sun9i-a80-usb-clks";
+			reg = <0x00a08000 0x8>;
+			clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
+			clock-names = "bus", "hosc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		cpucfg@1700000 {
+			compatible = "allwinner,sun9i-a80-cpucfg";
+			reg = <0x01700000 0x100>;
+		};
+
+		crypto: crypto@1c02000 {
+			compatible = "allwinner,sun9i-a80-crypto";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_SS>;
+			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
+			clock-names = "bus", "mod";
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&mmc_config_clk 0>, <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&mmc_config_clk 1>, <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&mmc_config_clk 2>, <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&mmc_config_clk 3>, <&ccu CLK_MMC3>,
+				 <&ccu CLK_MMC3_OUTPUT>,
+				 <&ccu CLK_MMC3_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 3>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc_config_clk: clk@1c13000 {
+			compatible = "allwinner,sun9i-a80-mmc-config-clk";
+			reg = <0x01c13000 0x10>;
+			clocks = <&ccu CLK_BUS_MMC>;
+			resets = <&ccu RST_BUS_MMC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clock-output-names = "mmc0_config", "mmc1_config",
+					     "mmc2_config", "mmc3_config";
+		};
+
+		gic: interrupt-controller@1c41000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c41000 0x1000>,
+			      <0x01c42000 0x2000>,
+			      <0x01c44000 0x2000>,
+			      <0x01c46000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		cci: cci@1c90000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01c90000 0x1000>;
+			ranges = <0x0 0x01c90000 0x10000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+
+			pmu@9000 {
+				 compatible = "arm,cci-400-pmu,r1";
+				 reg = <0x9000 0x5000>;
+				 interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		de_clocks: clock@3000000 {
+			compatible = "allwinner,sun9i-a80-de-clks";
+			reg = <0x03000000 0x30>;
+			clocks = <&ccu CLK_DE>,
+				 <&ccu CLK_SDRAM>,
+				 <&ccu CLK_BUS_DE>;
+			clock-names = "mod",
+				      "dram",
+				      "bus";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		fe0: display-frontend@3100000 {
+			compatible = "allwinner,sun9i-a80-display-frontend";
+			reg = <0x03100000 0x40000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_FE0>, <&de_clocks CLK_FE0>,
+				 <&de_clocks CLK_DRAM_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					reg = <1>;
+
+					fe0_out_deu0: endpoint {
+						remote-endpoint = <&deu0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		fe1: display-frontend@3140000 {
+			compatible = "allwinner,sun9i-a80-display-frontend";
+			reg = <0x03140000 0x40000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_FE1>, <&de_clocks CLK_FE1>,
+				 <&de_clocks CLK_DRAM_FE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe1_out: port@1 {
+					reg = <1>;
+
+					fe1_out_deu1: endpoint {
+						remote-endpoint = <&deu1_in_fe1>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@3200000 {
+			compatible = "allwinner,sun9i-a80-display-backend";
+			reg = <0x03200000 0x40000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_BE0>, <&de_clocks CLK_BE0>,
+				 <&de_clocks CLK_DRAM_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_BE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_deu0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&deu0_out_be0>;
+					};
+
+					be0_in_deu1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&deu1_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					reg = <1>;
+
+					be0_out_drc0: endpoint {
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		be1: display-backend@3240000 {
+			compatible = "allwinner,sun9i-a80-display-backend";
+			reg = <0x03240000 0x40000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_BE1>, <&de_clocks CLK_BE1>,
+				 <&de_clocks CLK_DRAM_BE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_BE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be1_in_deu0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&deu0_out_be1>;
+					};
+
+					be1_in_deu1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&deu1_out_be1>;
+					};
+				};
+
+				be1_out: port@1 {
+					reg = <1>;
+
+					be1_out_drc1: endpoint {
+						remote-endpoint = <&drc1_in_be1>;
+					};
+				};
+			};
+		};
+
+		deu0: deu@3300000 {
+			compatible = "allwinner,sun9i-a80-deu";
+			reg = <0x03300000 0x40000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DEU0>,
+				 <&de_clocks CLK_IEP_DEU0>,
+				 <&de_clocks CLK_DRAM_DEU0>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DEU0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				deu0_in: port@0 {
+					reg = <0>;
+
+					deu0_in_fe0: endpoint {
+						remote-endpoint = <&fe0_out_deu0>;
+					};
+				};
+
+				deu0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					deu0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_deu0>;
+					};
+
+					deu0_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_deu0>;
+					};
+				};
+			};
+		};
+
+		deu1: deu@3340000 {
+			compatible = "allwinner,sun9i-a80-deu";
+			reg = <0x03340000 0x40000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DEU1>,
+				 <&de_clocks CLK_IEP_DEU1>,
+				 <&de_clocks CLK_DRAM_DEU1>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DEU1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				deu1_in: port@0 {
+					reg = <0>;
+
+					deu1_in_fe1: endpoint {
+						remote-endpoint = <&fe1_out_deu1>;
+					};
+				};
+
+				deu1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					deu1_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_deu1>;
+					};
+
+					deu1_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_deu1>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@3400000 {
+			compatible = "allwinner,sun9i-a80-drc";
+			reg = <0x03400000 0x40000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DRC0>,
+				 <&de_clocks CLK_IEP_DRC0>,
+				 <&de_clocks CLK_DRAM_DRC0>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DRC0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					reg = <0>;
+
+					drc0_in_be0: endpoint {
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+				};
+			};
+		};
+
+		drc1: drc@3440000 {
+			compatible = "allwinner,sun9i-a80-drc";
+			reg = <0x03440000 0x40000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DRC1>,
+				 <&de_clocks CLK_IEP_DRC1>,
+				 <&de_clocks CLK_DRAM_DRC1>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DRC1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc1_in: port@0 {
+					reg = <0>;
+
+					drc1_in_be1: endpoint {
+						remote-endpoint = <&be1_out_drc1>;
+					};
+				};
+
+				drc1_out: port@1 {
+					reg = <1>;
+
+					drc1_out_tcon1: endpoint {
+						remote-endpoint = <&tcon1_in_drc1>;
+					};
+				};
+			};
+		};
+
+		tcon0: lcd-controller@3c00000 {
+			compatible = "allwinner,sun9i-a80-tcon-lcd";
+			reg = <0x03c00000 0x10000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>;
+			clock-names = "ahb", "tcon-ch0";
+			resets = <&ccu RST_BUS_LCD0>,
+				 <&ccu RST_BUS_EDP>,
+				 <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd",
+				      "edp",
+				      "lvds";
+			clock-output-names = "tcon0-pixel-clock";
+			#clock-cells = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_drc0: endpoint {
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		tcon1: lcd-controller@3c10000 {
+			compatible = "allwinner,sun9i-a80-tcon-tv";
+			reg = <0x03c10000 0x10000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_LCD1>, <&ccu CLK_LCD1>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_LCD1>, <&ccu RST_BUS_EDP>;
+			reset-names = "lcd", "edp";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					reg = <0>;
+
+					tcon1_in_drc1: endpoint {
+						remote-endpoint = <&drc1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		ccu: clock@6000000 {
+			compatible = "allwinner,sun9i-a80-ccu";
+			reg = <0x06000000 0x800>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		timer@6000c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x06000c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@6000ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x06000ca0 0x20>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		pio: pinctrl@6000800 {
+			compatible = "allwinner,sun9i-a80-pinctrl";
+			reg = <0x06000800 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			gmac_rgmii_pins: gmac-rgmii-pins {
+				pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5",
+				       "PA7", "PA8", "PA9", "PA10", "PA12",
+				       "PA13", "PA15", "PA16", "PA17";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pins = "PG10", "PG11";
+				function = "i2c3";
+			};
+
+			lcd0_rgb888_pins: lcd0-rgb888-pins {
+				pins = "PD0", "PD1", "PD2", "PD3",
+				       "PD4", "PD5", "PD6", "PD7",
+				       "PD8", "PD9", "PD10", "PD11",
+				       "PD12", "PD13", "PD14", "PD15",
+				       "PD16", "PD17", "PD18", "PD19",
+				       "PD20", "PD21", "PD22", "PD23",
+				       "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1" ,"PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1" ,"PG2", "PG3",
+						 "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_pins: mmc2-8bit-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+				       "PC10", "PC11", "PC12",
+				       "PC13", "PC14", "PC15",
+				       "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			uart0_ph_pins: uart0-ph-pins {
+				pins = "PH12", "PH13";
+				function = "uart0";
+			};
+
+			uart4_pins: uart4-pins {
+				pins = "PG12", "PG13", "PG14", "PG15";
+				function = "uart4";
+			};
+		};
+
+		uart0: serial@7000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@7000400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@7000800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@7000c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@7001000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07001000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@7001400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07001400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@7002800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07002800 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@7002c00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07002c00 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@7003000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@7003400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003400 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@7003800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003800 0x400>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_wdt: watchdog@8001000 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x08001000 0x20>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		prcm@8001400 {
+			compatible = "allwinner,sun9i-a80-prcm";
+			reg = <0x08001400 0x200>;
+		};
+
+		apbs_rst: reset@80014b0 {
+			reg = <0x080014b0 0x4>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+
+		nmi_intc: interrupt-controller@80015a0 {
+			compatible = "allwinner,sun9i-a80-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x080015a0 0xc>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_ir: ir@8002000 {
+			compatible = "allwinner,sun6i-a31-ir";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_ir_pins>;
+			clocks = <&apbs_gates 1>, <&r_ir_clk>;
+			clock-names = "apb", "ir";
+			resets = <&apbs_rst 1>;
+			reg = <0x08002000 0x40>;
+			status = "disabled";
+		};
+
+		r_uart: serial@8002800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x08002800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apbs_gates 4>;
+			resets = <&apbs_rst 4>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@8002c00 {
+			compatible = "allwinner,sun9i-a80-r-pinctrl";
+			reg = <0x08002c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			r_ir_pins: r-ir-pins {
+				pins = "PL6";
+				function = "s_cir_rx";
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PN0", "PN1";
+				function = "s_rsb";
+				drive-strength = <20>;
+				bias-pull-up;
+			};
+		};
+
+		r_rsb: rsb@8003400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x08003400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apbs_gates 3>;
+			clock-frequency = <3000000>;
+			resets = <&apbs_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};