Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 630 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts
new file mode 100644
index 000000000..acaa99c5f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts
@@ -0,0 +1,630 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, 2023 Jianhua Lu <lujianhua000@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+#include "pm8009.dtsi"
+
+/*
+ * Delete following upstream (sm8250.dtsi) reserved
+ * memory mappings which are different on this device.
+ */
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_secure_heap;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &xbl_aop_mem;
+
+/ {
+	model = "Xiaomi Mi Pad 5 Pro";
+	compatible = "xiaomi,elish", "qcom,sm8250";
+	classis-type = "tablet";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
+	qcom,board-id = <0x10008 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			width = <1600>;
+			height = <2560>;
+			stride = <(1600 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	battery_l: battery-l {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3870000>;
+		energy-full-design-microwatt-hours = <16600000>;
+		charge-full-design-microamp-hours = <4300000>;
+	};
+
+	battery_r: battery-r {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3870000>;
+		energy-full-design-microwatt-hours = <16600000>;
+		charge-full-design-microamp-hours = <4300000>;
+	};
+
+	bl_vddpos_5p5: bl-vddpos-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_vddpos_5p5";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+		gpio = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	bl_vddneg_5p5: bl-vddneg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_vddneg_5p5";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+		gpio = <&tlmm 131 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_n>;
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			gpio-key,wakeup;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/* S6c is really ebi.lvl but it's there for supply map completeness sake. */
+	vreg_s6c_0p88: smpc6-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s6c_0p88";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+
+	reserved-memory {
+		xbl_aop_mem: xbl-aop@80700000 {
+			reg = <0x0 0x80600000 0x0 0x260000>;
+			no-map;
+		};
+
+		slpi_mem: slpi@88c00000 {
+			reg = <0x0 0x88c00000 0x0 0x2f00000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@8bb00000 {
+			reg = <0x0 0x8bb00000 0x0 0x2500000>;
+			no-map;
+		};
+
+		spss_mem: spss@8e000000 {
+			reg = <0x0 0x8e000000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: cdsp-secure-heap@8e100000 {
+			reg = <0x0 0x8e100000 0x0 0x4600000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@9c000000 {
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			no-map;
+		};
+
+		ramoops@b0000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xb0000000 0x0 0x400000>;
+			record-size = <0x1000>;
+			console-size = <0x200000>;
+			ecc-size = <16>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	firmware-name = "qcom/sm8250/xiaomi/elish/adsp.mbn";
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p35>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		/* (S1+S2+S3) - cx.lvl (ARC) */
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_1p9: smps5 {
+			regulator-name = "vreg_s5a_1p9";
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p95: smps6 {
+			regulator-name = "vreg_s6a_0p95";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p9: ldo3 {
+			regulator-name = "vreg_l3a_0p9";
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L4 - lmx.lvl (ARC) */
+
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L7 is unused. */
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L10 is unused, L11 - lcx.lvl (ARC) */
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L13 is unused. */
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-name = "vreg_l14a_1p88";
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L15 & L16 are unused. */
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-name = "vreg_l17a_3p0";
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p9: ldo18 {
+			regulator-name = "vreg_l18a_0p9";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/*
+	 * Remaining regulators that are not yet supported:
+	 * OLEDB: 4925000-8100000
+	 * ab: 4600000-6100000
+	 * ibb: 800000-5400000
+	 */
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p35>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3350000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		/*
+		 * S1-S6 are ARCs:
+		 * (S1+S2) - gfx.lvl,
+		 * S3 - mx.lvl,
+		 * (S4+S5) - mmcx.lvl,
+		 * S6 - ebi.lvl
+		 */
+
+		vreg_s7c_0p35: smps7 {
+			regulator-name = "vreg_s7c_0p35";
+			regulator-min-microvolt = <348000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s8c_1p35: smps8 {
+			regulator-name = "vreg_s8c_1p35";
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L2-4 are unused. */
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-name = "vreg_l6c_2p9";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_2p85: ldo7 {
+			regulator-name = "vreg_l7c_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-name = "vreg_l9c_2p9";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-name = "vreg_l10c_3p3";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3296000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p0: ldo11 {
+			regulator-name = "vreg_l11c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+		vdd-l2-supply = <&vreg_s8c_1p35>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-supply = <&vreg_s4a_1p8>;
+
+		vreg_s1f_1p2: smps1 {
+			regulator-name = "vreg_s1f_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2f_0p5: smps2 {
+			regulator-name = "vreg_s2f_0p5";
+			regulator-min-microvolt = <512000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L1 is unused. */
+
+		vreg_l2f_1p3: ldo2 {
+			regulator-name = "vreg_l2f_1p3";
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L3 & L4 are unused. */
+
+		vreg_l5f_2p8: ldo5 {
+			regulator-name = "vreg_l5f_2p85";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_2p8: ldo6 {
+			regulator-name = "vreg_l6f_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7f_1p8: ldo7 {
+			regulator-name = "vreg_l7f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	firmware-name = "qcom/sm8250/xiaomi/elish/cdsp.mbn";
+	status = "okay";
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sm8250/xiaomi/elish/a650_zap.mbn";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27z561";
+		reg = <0x55>;
+		monitored-battery = <&battery_r>;
+	};
+};
+
+&i2c11 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	backlight: backlight@11 {
+		compatible = "kinetic,ktz8866";
+		reg = <0x11>;
+		vddpos-supply = <&bl_vddpos_5p5>;
+		vddneg-supply = <&bl_vddneg_5p5>;
+		enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
+		current-num-sinks = <5>;
+		kinetic,current-ramp-delay-ms = <128>;
+		kinetic,led-enable-ramp-delay-ms = <1>;
+		kinetic,enable-lcd-bias;
+	};
+};
+
+&i2c13 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27z561";
+		reg = <0x55>;
+		monitored-battery = <&battery_l>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+};
+
+&pm8150_gpios {
+	vol_up_n: vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&slpi {
+	firmware-name = "qcom/sm8250/xiaomi/elish/slpi.mbn";
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <40 4>;
+};
+
+&usb_1 {
+	/* USB 2.0 only */
+	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+	maximum-spped = "high-speed";
+	/* Remove USB3 phy */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l17a_3p0>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <800000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <800000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "qcom/sm8250/elish/venus.mbn";
+	status = "okay";
+};