Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 161 insertions, 0 deletions

diff --git a/arch/m68k/fpsp040/smovecr.S b/arch/m68k/fpsp040/smovecr.S
new file mode 100644
index 000000000..73c365120
--- /dev/null
+++ b/arch/m68k/fpsp040/smovecr.S
@@ -0,0 +1,161 @@
+|
+|	smovecr.sa 3.1 12/10/90
+|
+|	The entry point sMOVECR returns the constant at the
+|	offset given in the instruction field.
+|
+|	Input: An offset in the instruction word.
+|
+|	Output:	The constant rounded to the user's rounding
+|		mode unchecked for overflow.
+|
+|	Modified: fp0.
+|
+|
+|		Copyright (C) Motorola, Inc. 1990
+|			All Rights Reserved
+|
+|       For details on the license for this file, please see the
+|       file, README, in this same directory.
+
+|SMOVECR	idnt	2,1 | Motorola 040 Floating Point Software Package
+
+	|section 8
+
+#include "fpsp.h"
+
+	|xref	nrm_set
+	|xref	round
+	|xref	PIRN
+	|xref	PIRZRM
+	|xref	PIRP
+	|xref	SMALRN
+	|xref	SMALRZRM
+	|xref	SMALRP
+	|xref	BIGRN
+	|xref	BIGRZRM
+	|xref	BIGRP
+
+FZERO:	.long	00000000
+|
+|	FMOVECR
+|
+	.global	smovcr
+smovcr:
+	bfextu	CMDREG1B(%a6){#9:#7},%d0 |get offset
+	bfextu	USER_FPCR(%a6){#26:#2},%d1 |get rmode
+|
+| check range of offset
+|
+	tstb	%d0		|if zero, offset is to pi
+	beqs	PI_TBL		|it is pi
+	cmpib	#0x0a,%d0		|check range $01 - $0a
+	bles	Z_VAL		|if in this range, return zero
+	cmpib	#0x0e,%d0		|check range $0b - $0e
+	bles	SM_TBL		|valid constants in this range
+	cmpib	#0x2f,%d0		|check range $10 - $2f
+	bles	Z_VAL		|if in this range, return zero
+	cmpib	#0x3f,%d0		|check range $30 - $3f
+	ble	BG_TBL		|valid constants in this range
+Z_VAL:
+	fmoves	FZERO,%fp0
+	rts
+PI_TBL:
+	tstb	%d1		|offset is zero, check for rmode
+	beqs	PI_RN		|if zero, rn mode
+	cmpib	#0x3,%d1		|check for rp
+	beqs	PI_RP		|if 3, rp mode
+PI_RZRM:
+	leal	PIRZRM,%a0	|rmode is rz or rm, load PIRZRM in a0
+	bra	set_finx
+PI_RN:
+	leal	PIRN,%a0		|rmode is rn, load PIRN in a0
+	bra	set_finx
+PI_RP:
+	leal	PIRP,%a0		|rmode is rp, load PIRP in a0
+	bra	set_finx
+SM_TBL:
+	subil	#0xb,%d0		|make offset in 0 - 4 range
+	tstb	%d1		|check for rmode
+	beqs	SM_RN		|if zero, rn mode
+	cmpib	#0x3,%d1		|check for rp
+	beqs	SM_RP		|if 3, rp mode
+SM_RZRM:
+	leal	SMALRZRM,%a0	|rmode is rz or rm, load SMRZRM in a0
+	cmpib	#0x2,%d0		|check if result is inex
+	ble	set_finx	|if 0 - 2, it is inexact
+	bra	no_finx		|if 3, it is exact
+SM_RN:
+	leal	SMALRN,%a0	|rmode is rn, load SMRN in a0
+	cmpib	#0x2,%d0		|check if result is inex
+	ble	set_finx	|if 0 - 2, it is inexact
+	bra	no_finx		|if 3, it is exact
+SM_RP:
+	leal	SMALRP,%a0	|rmode is rp, load SMRP in a0
+	cmpib	#0x2,%d0		|check if result is inex
+	ble	set_finx	|if 0 - 2, it is inexact
+	bra	no_finx		|if 3, it is exact
+BG_TBL:
+	subil	#0x30,%d0		|make offset in 0 - f range
+	tstb	%d1		|check for rmode
+	beqs	BG_RN		|if zero, rn mode
+	cmpib	#0x3,%d1		|check for rp
+	beqs	BG_RP		|if 3, rp mode
+BG_RZRM:
+	leal	BIGRZRM,%a0	|rmode is rz or rm, load BGRZRM in a0
+	cmpib	#0x1,%d0		|check if result is inex
+	ble	set_finx	|if 0 - 1, it is inexact
+	cmpib	#0x7,%d0		|second check
+	ble	no_finx		|if 0 - 7, it is exact
+	bra	set_finx	|if 8 - f, it is inexact
+BG_RN:
+	leal	BIGRN,%a0	|rmode is rn, load BGRN in a0
+	cmpib	#0x1,%d0		|check if result is inex
+	ble	set_finx	|if 0 - 1, it is inexact
+	cmpib	#0x7,%d0		|second check
+	ble	no_finx		|if 0 - 7, it is exact
+	bra	set_finx	|if 8 - f, it is inexact
+BG_RP:
+	leal	BIGRP,%a0	|rmode is rp, load SMRP in a0
+	cmpib	#0x1,%d0		|check if result is inex
+	ble	set_finx	|if 0 - 1, it is inexact
+	cmpib	#0x7,%d0		|second check
+	ble	no_finx		|if 0 - 7, it is exact
+|	bra	set_finx	;if 8 - f, it is inexact
+set_finx:
+	orl	#inx2a_mask,USER_FPSR(%a6) |set inex2/ainex
+no_finx:
+	mulul	#12,%d0			|use offset to point into tables
+	movel	%d1,L_SCR1(%a6)		|load mode for round call
+	bfextu	USER_FPCR(%a6){#24:#2},%d1	|get precision
+	tstl	%d1			|check if extended precision
+|
+| Precision is extended
+|
+	bnes	not_ext			|if extended, do not call round
+	fmovemx (%a0,%d0),%fp0-%fp0		|return result in fp0
+	rts
+|
+| Precision is single or double
+|
+not_ext:
+	swap	%d1			|rnd prec in upper word of d1
+	addl	L_SCR1(%a6),%d1		|merge rmode in low word of d1
+	movel	(%a0,%d0),FP_SCR1(%a6)	|load first word to temp storage
+	movel	4(%a0,%d0),FP_SCR1+4(%a6)	|load second word
+	movel	8(%a0,%d0),FP_SCR1+8(%a6)	|load third word
+	clrl	%d0			|clear g,r,s
+	lea	FP_SCR1(%a6),%a0
+	btstb	#sign_bit,LOCAL_EX(%a0)
+	sne	LOCAL_SGN(%a0)		|convert to internal ext. format
+
+	bsr	round			|go round the mantissa
+
+	bfclr	LOCAL_SGN(%a0){#0:#8}	|convert back to IEEE ext format
+	beqs	fin_fcr
+	bsetb	#sign_bit,LOCAL_EX(%a0)
+fin_fcr:
+	fmovemx (%a0),%fp0-%fp0
+	rts
+
+	|end