Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 157 insertions, 0 deletions

diff --git a/arch/m68k/lib/udivsi3.S b/arch/m68k/lib/udivsi3.S
new file mode 100644
index 000000000..78440ae51
--- /dev/null
+++ b/arch/m68k/lib/udivsi3.S
@@ -0,0 +1,157 @@
+/* libgcc1 routines for 68000 w/o floating-point hardware.
+   Copyright (C) 1994, 1996, 1997, 1998 Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 2, or (at your option) any
+later version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file with other programs, and to distribute
+those programs without any restriction coming from the use of this
+file.  (The General Public License restrictions do apply in other
+respects; for example, they cover modification of the file, and
+distribution when not linked into another program.)
+
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+General Public License for more details. */
+
+/* As a special exception, if you link this library with files
+   compiled with GCC to produce an executable, this does not cause
+   the resulting executable to be covered by the GNU General Public License.
+   This exception does not however invalidate any other reasons why
+   the executable file might be covered by the GNU General Public License.  */
+
+/* Use this one for any 680x0; assumes no floating point hardware.
+   The trailing " '" appearing on some lines is for ANSI preprocessors.  Yuk.
+   Some of this code comes from MINIX, via the folks at ericsson.
+   D. V. Henkel-Wallace (gumby@cygnus.com) Fete Bastille, 1992
+*/
+#include <asm/export.h>
+/* These are predefined by new versions of GNU cpp.  */
+
+#ifndef __USER_LABEL_PREFIX__
+#define __USER_LABEL_PREFIX__ _
+#endif
+
+#ifndef __REGISTER_PREFIX__
+#define __REGISTER_PREFIX__
+#endif
+
+#ifndef __IMMEDIATE_PREFIX__
+#define __IMMEDIATE_PREFIX__ #
+#endif
+
+/* ANSI concatenation macros.  */
+
+#define CONCAT1(a, b) CONCAT2(a, b)
+#define CONCAT2(a, b) a ## b
+
+/* Use the right prefix for global labels.  */
+
+#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x)
+
+/* Use the right prefix for registers.  */
+
+#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x)
+
+/* Use the right prefix for immediate values.  */
+
+#define IMM(x) CONCAT1 (__IMMEDIATE_PREFIX__, x)
+
+#define d0 REG (d0)
+#define d1 REG (d1)
+#define d2 REG (d2)
+#define d3 REG (d3)
+#define d4 REG (d4)
+#define d5 REG (d5)
+#define d6 REG (d6)
+#define d7 REG (d7)
+#define a0 REG (a0)
+#define a1 REG (a1)
+#define a2 REG (a2)
+#define a3 REG (a3)
+#define a4 REG (a4)
+#define a5 REG (a5)
+#define a6 REG (a6)
+#define fp REG (fp)
+#define sp REG (sp)
+
+	.text
+	.proc
+	.globl	SYM (__udivsi3)
+SYM (__udivsi3):
+#if !(defined(__mcf5200__) || defined(__mcoldfire__))
+	movel	d2, sp@-
+	movel	sp@(12), d1	/* d1 = divisor */
+	movel	sp@(8), d0	/* d0 = dividend */
+
+	cmpl	IMM (0x10000), d1 /* divisor >= 2 ^ 16 ?   */
+	jcc	L3		/* then try next algorithm */
+	movel	d0, d2
+	clrw	d2
+	swap	d2
+	divu	d1, d2          /* high quotient in lower word */
+	movew	d2, d0		/* save high quotient */
+	swap	d0
+	movew	sp@(10), d2	/* get low dividend + high rest */
+	divu	d1, d2		/* low quotient */
+	movew	d2, d0
+	jra	L6
+
+L3:	movel	d1, d2		/* use d2 as divisor backup */
+L4:	lsrl	IMM (1), d1	/* shift divisor */
+	lsrl	IMM (1), d0	/* shift dividend */
+	cmpl	IMM (0x10000), d1 /* still divisor >= 2 ^ 16 ?  */
+	jcc	L4
+	divu	d1, d0		/* now we have 16 bit divisor */
+	andl	IMM (0xffff), d0 /* mask out divisor, ignore remainder */
+
+/* Multiply the 16 bit tentative quotient with the 32 bit divisor.  Because of
+   the operand ranges, this might give a 33 bit product.  If this product is
+   greater than the dividend, the tentative quotient was too large. */
+	movel	d2, d1
+	mulu	d0, d1		/* low part, 32 bits */
+	swap	d2
+	mulu	d0, d2		/* high part, at most 17 bits */
+	swap	d2		/* align high part with low part */
+	tstw	d2		/* high part 17 bits? */
+	jne	L5		/* if 17 bits, quotient was too large */
+	addl	d2, d1		/* add parts */
+	jcs	L5		/* if sum is 33 bits, quotient was too large */
+	cmpl	sp@(8), d1	/* compare the sum with the dividend */
+	jls	L6		/* if sum > dividend, quotient was too large */
+L5:	subql	IMM (1), d0	/* adjust quotient */
+
+L6:	movel	sp@+, d2
+	rts
+
+#else /* __mcf5200__ || __mcoldfire__ */
+
+/* Coldfire implementation of non-restoring division algorithm from
+   Hennessy & Patterson, Appendix A. */
+	link	a6,IMM (-12)
+	moveml	d2-d4,sp@
+	movel	a6@(8),d0
+	movel	a6@(12),d1
+	clrl	d2		| clear p
+	moveq	IMM (31),d4
+L1:	addl	d0,d0		| shift reg pair (p,a) one bit left
+	addxl	d2,d2
+	movl	d2,d3		| subtract b from p, store in tmp.
+	subl	d1,d3
+	jcs	L2		| if no carry,
+	bset	IMM (0),d0	| set the low order bit of a to 1,
+	movl	d3,d2		| and store tmp in p.
+L2:	subql	IMM (1),d4
+	jcc	L1
+	moveml	sp@,d2-d4	| restore data registers
+	unlk	a6		| and return
+	rts
+#endif /* __mcf5200__ || __mcoldfire__ */
+	EXPORT_SYMBOL(__udivsi3)