Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 665 insertions, 0 deletions

diff --git a/arch/m68k/mac/misc.c b/arch/m68k/mac/misc.c
new file mode 100644
index 000000000..c7cb29f0f
--- /dev/null
+++ b/arch/m68k/mac/misc.c
@@ -0,0 +1,665 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Miscellaneous Mac68K-specific stuff
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/rtc.h>
+#include <linux/mm.h>
+
+#include <linux/adb.h>
+#include <linux/cuda.h>
+#include <linux/pmu.h>
+
+#include <linux/uaccess.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/macintosh.h>
+#include <asm/mac_via.h>
+#include <asm/mac_oss.h>
+
+#include <asm/machdep.h>
+
+/*
+ * Offset between Unix time (1970-based) and Mac time (1904-based). Cuda and PMU
+ * times wrap in 2040. If we need to handle later times, the read_time functions
+ * need to be changed to interpret wrapped times as post-2040.
+ */
+
+#define RTC_OFFSET 2082844800
+
+static void (*rom_reset)(void);
+
+#if IS_ENABLED(CONFIG_NVRAM)
+#ifdef CONFIG_ADB_CUDA
+static unsigned char cuda_pram_read_byte(int offset)
+{
+	struct adb_request req;
+
+	if (cuda_request(&req, NULL, 4, CUDA_PACKET, CUDA_GET_PRAM,
+			 (offset >> 8) & 0xFF, offset & 0xFF) < 0)
+		return 0;
+	while (!req.complete)
+		cuda_poll();
+	return req.reply[3];
+}
+
+static void cuda_pram_write_byte(unsigned char data, int offset)
+{
+	struct adb_request req;
+
+	if (cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_SET_PRAM,
+			 (offset >> 8) & 0xFF, offset & 0xFF, data) < 0)
+		return;
+	while (!req.complete)
+		cuda_poll();
+}
+#endif /* CONFIG_ADB_CUDA */
+
+#ifdef CONFIG_ADB_PMU
+static unsigned char pmu_pram_read_byte(int offset)
+{
+	struct adb_request req;
+
+	if (pmu_request(&req, NULL, 3, PMU_READ_XPRAM,
+	                offset & 0xFF, 1) < 0)
+		return 0;
+	pmu_wait_complete(&req);
+
+	return req.reply[0];
+}
+
+static void pmu_pram_write_byte(unsigned char data, int offset)
+{
+	struct adb_request req;
+
+	if (pmu_request(&req, NULL, 4, PMU_WRITE_XPRAM,
+	                offset & 0xFF, 1, data) < 0)
+		return;
+	pmu_wait_complete(&req);
+}
+#endif /* CONFIG_ADB_PMU */
+#endif /* CONFIG_NVRAM */
+
+/*
+ * VIA PRAM/RTC access routines
+ *
+ * Must be called with interrupts disabled and
+ * the RTC should be enabled.
+ */
+
+static __u8 via_rtc_recv(void)
+{
+	int i, reg;
+	__u8 data;
+
+	reg = via1[vBufB] & ~VIA1B_vRTCClk;
+
+	/* Set the RTC data line to be an input. */
+
+	via1[vDirB] &= ~VIA1B_vRTCData;
+
+	/* The bits of the byte come out in MSB order */
+
+	data = 0;
+	for (i = 0 ; i < 8 ; i++) {
+		via1[vBufB] = reg;
+		via1[vBufB] = reg | VIA1B_vRTCClk;
+		data = (data << 1) | (via1[vBufB] & VIA1B_vRTCData);
+	}
+
+	/* Return RTC data line to output state */
+
+	via1[vDirB] |= VIA1B_vRTCData;
+
+	return data;
+}
+
+static void via_rtc_send(__u8 data)
+{
+	int i, reg, bit;
+
+	reg = via1[vBufB] & ~(VIA1B_vRTCClk | VIA1B_vRTCData);
+
+	/* The bits of the byte go into the RTC in MSB order */
+
+	for (i = 0 ; i < 8 ; i++) {
+		bit = data & 0x80? 1 : 0;
+		data <<= 1;
+		via1[vBufB] = reg | bit;
+		via1[vBufB] = reg | bit | VIA1B_vRTCClk;
+	}
+}
+
+/*
+ * These values can be found in Inside Macintosh vol. III ch. 2
+ * which has a description of the RTC chip in the original Mac.
+ */
+
+#define RTC_FLG_READ            BIT(7)
+#define RTC_FLG_WRITE_PROTECT   BIT(7)
+#define RTC_CMD_READ(r)         (RTC_FLG_READ | (r << 2))
+#define RTC_CMD_WRITE(r)        (r << 2)
+#define RTC_REG_SECONDS_0       0
+#define RTC_REG_SECONDS_1       1
+#define RTC_REG_SECONDS_2       2
+#define RTC_REG_SECONDS_3       3
+#define RTC_REG_WRITE_PROTECT   13
+
+/*
+ * Inside Mac has no information about two-byte RTC commands but
+ * the MAME/MESS source code has the essentials.
+ */
+
+#define RTC_REG_XPRAM           14
+#define RTC_CMD_XPRAM_READ      (RTC_CMD_READ(RTC_REG_XPRAM) << 8)
+#define RTC_CMD_XPRAM_WRITE     (RTC_CMD_WRITE(RTC_REG_XPRAM) << 8)
+#define RTC_CMD_XPRAM_ARG(a)    (((a & 0xE0) << 3) | ((a & 0x1F) << 2))
+
+/*
+ * Execute a VIA PRAM/RTC command. For read commands
+ * data should point to a one-byte buffer for the
+ * resulting data. For write commands it should point
+ * to the data byte to for the command.
+ *
+ * This function disables all interrupts while running.
+ */
+
+static void via_rtc_command(int command, __u8 *data)
+{
+	unsigned long flags;
+	int is_read;
+
+	local_irq_save(flags);
+
+	/* The least significant bits must be 0b01 according to Inside Mac */
+
+	command = (command & ~3) | 1;
+
+	/* Enable the RTC and make sure the strobe line is high */
+
+	via1[vBufB] = (via1[vBufB] | VIA1B_vRTCClk) & ~VIA1B_vRTCEnb;
+
+	if (command & 0xFF00) {		/* extended (two-byte) command */
+		via_rtc_send((command & 0xFF00) >> 8);
+		via_rtc_send(command & 0xFF);
+		is_read = command & (RTC_FLG_READ << 8);
+	} else {			/* one-byte command */
+		via_rtc_send(command);
+		is_read = command & RTC_FLG_READ;
+	}
+	if (is_read) {
+		*data = via_rtc_recv();
+	} else {
+		via_rtc_send(*data);
+	}
+
+	/* All done, disable the RTC */
+
+	via1[vBufB] |= VIA1B_vRTCEnb;
+
+	local_irq_restore(flags);
+}
+
+#if IS_ENABLED(CONFIG_NVRAM)
+static unsigned char via_pram_read_byte(int offset)
+{
+	unsigned char temp;
+
+	via_rtc_command(RTC_CMD_XPRAM_READ | RTC_CMD_XPRAM_ARG(offset), &temp);
+
+	return temp;
+}
+
+static void via_pram_write_byte(unsigned char data, int offset)
+{
+	unsigned char temp;
+
+	temp = 0x55;
+	via_rtc_command(RTC_CMD_WRITE(RTC_REG_WRITE_PROTECT), &temp);
+
+	temp = data;
+	via_rtc_command(RTC_CMD_XPRAM_WRITE | RTC_CMD_XPRAM_ARG(offset), &temp);
+
+	temp = 0x55 | RTC_FLG_WRITE_PROTECT;
+	via_rtc_command(RTC_CMD_WRITE(RTC_REG_WRITE_PROTECT), &temp);
+}
+#endif /* CONFIG_NVRAM */
+
+/*
+ * Return the current time in seconds since January 1, 1904.
+ *
+ * This only works on machines with the VIA-based PRAM/RTC, which
+ * is basically any machine with Mac II-style ADB.
+ */
+
+static time64_t via_read_time(void)
+{
+	union {
+		__u8 cdata[4];
+		__u32 idata;
+	} result, last_result;
+	int count = 1;
+
+	via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_0), &last_result.cdata[3]);
+	via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_1), &last_result.cdata[2]);
+	via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_2), &last_result.cdata[1]);
+	via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_3), &last_result.cdata[0]);
+
+	/*
+	 * The NetBSD guys say to loop until you get the same reading
+	 * twice in a row.
+	 */
+
+	while (1) {
+		via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_0),
+		                &result.cdata[3]);
+		via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_1),
+		                &result.cdata[2]);
+		via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_2),
+		                &result.cdata[1]);
+		via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_3),
+		                &result.cdata[0]);
+
+		if (result.idata == last_result.idata)
+			return (time64_t)result.idata - RTC_OFFSET;
+
+		if (++count > 10)
+			break;
+
+		last_result.idata = result.idata;
+	}
+
+	pr_err("%s: failed to read a stable value; got 0x%08x then 0x%08x\n",
+	       __func__, last_result.idata, result.idata);
+
+	return 0;
+}
+
+/*
+ * Set the current time to a number of seconds since January 1, 1904.
+ *
+ * This only works on machines with the VIA-based PRAM/RTC, which
+ * is basically any machine with Mac II-style ADB.
+ */
+
+static void via_set_rtc_time(struct rtc_time *tm)
+{
+	union {
+		__u8 cdata[4];
+		__u32 idata;
+	} data;
+	__u8 temp;
+	time64_t time;
+
+	time = mktime64(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
+	                tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	/* Clear the write protect bit */
+
+	temp = 0x55;
+	via_rtc_command(RTC_CMD_WRITE(RTC_REG_WRITE_PROTECT), &temp);
+
+	data.idata = lower_32_bits(time + RTC_OFFSET);
+	via_rtc_command(RTC_CMD_WRITE(RTC_REG_SECONDS_0), &data.cdata[3]);
+	via_rtc_command(RTC_CMD_WRITE(RTC_REG_SECONDS_1), &data.cdata[2]);
+	via_rtc_command(RTC_CMD_WRITE(RTC_REG_SECONDS_2), &data.cdata[1]);
+	via_rtc_command(RTC_CMD_WRITE(RTC_REG_SECONDS_3), &data.cdata[0]);
+
+	/* Set the write protect bit */
+
+	temp = 0x55 | RTC_FLG_WRITE_PROTECT;
+	via_rtc_command(RTC_CMD_WRITE(RTC_REG_WRITE_PROTECT), &temp);
+}
+
+static void via_shutdown(void)
+{
+	if (rbv_present) {
+		via2[rBufB] &= ~0x04;
+	} else {
+		/* Direction of vDirB is output */
+		via2[vDirB] |= 0x04;
+		/* Send a value of 0 on that line */
+		via2[vBufB] &= ~0x04;
+		mdelay(1000);
+	}
+}
+
+static void oss_shutdown(void)
+{
+	oss->rom_ctrl = OSS_POWEROFF;
+}
+
+#ifdef CONFIG_ADB_CUDA
+static void cuda_restart(void)
+{
+	struct adb_request req;
+
+	if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_RESET_SYSTEM) < 0)
+		return;
+	while (!req.complete)
+		cuda_poll();
+}
+
+static void cuda_shutdown(void)
+{
+	struct adb_request req;
+
+	if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_POWERDOWN) < 0)
+		return;
+
+	/* Avoid infinite polling loop when PSU is not under Cuda control */
+	switch (macintosh_config->ident) {
+	case MAC_MODEL_C660:
+	case MAC_MODEL_Q605:
+	case MAC_MODEL_Q605_ACC:
+	case MAC_MODEL_P475:
+	case MAC_MODEL_P475F:
+		return;
+	}
+
+	while (!req.complete)
+		cuda_poll();
+}
+#endif /* CONFIG_ADB_CUDA */
+
+/*
+ *-------------------------------------------------------------------
+ * Below this point are the generic routines; they'll dispatch to the
+ * correct routine for the hardware on which we're running.
+ *-------------------------------------------------------------------
+ */
+
+#if IS_ENABLED(CONFIG_NVRAM)
+unsigned char mac_pram_read_byte(int addr)
+{
+	switch (macintosh_config->adb_type) {
+	case MAC_ADB_IOP:
+	case MAC_ADB_II:
+	case MAC_ADB_PB1:
+		return via_pram_read_byte(addr);
+#ifdef CONFIG_ADB_CUDA
+	case MAC_ADB_EGRET:
+	case MAC_ADB_CUDA:
+		return cuda_pram_read_byte(addr);
+#endif
+#ifdef CONFIG_ADB_PMU
+	case MAC_ADB_PB2:
+		return pmu_pram_read_byte(addr);
+#endif
+	default:
+		return 0xFF;
+	}
+}
+
+void mac_pram_write_byte(unsigned char val, int addr)
+{
+	switch (macintosh_config->adb_type) {
+	case MAC_ADB_IOP:
+	case MAC_ADB_II:
+	case MAC_ADB_PB1:
+		via_pram_write_byte(val, addr);
+		break;
+#ifdef CONFIG_ADB_CUDA
+	case MAC_ADB_EGRET:
+	case MAC_ADB_CUDA:
+		cuda_pram_write_byte(val, addr);
+		break;
+#endif
+#ifdef CONFIG_ADB_PMU
+	case MAC_ADB_PB2:
+		pmu_pram_write_byte(val, addr);
+		break;
+#endif
+	default:
+		break;
+	}
+}
+
+ssize_t mac_pram_get_size(void)
+{
+	return 256;
+}
+#endif /* CONFIG_NVRAM */
+
+void mac_poweroff(void)
+{
+	if (oss_present) {
+		oss_shutdown();
+	} else if (macintosh_config->adb_type == MAC_ADB_II) {
+		via_shutdown();
+#ifdef CONFIG_ADB_CUDA
+	} else if (macintosh_config->adb_type == MAC_ADB_EGRET ||
+	           macintosh_config->adb_type == MAC_ADB_CUDA) {
+		cuda_shutdown();
+#endif
+#ifdef CONFIG_ADB_PMU
+	} else if (macintosh_config->adb_type == MAC_ADB_PB2) {
+		pmu_shutdown();
+#endif
+	}
+
+	pr_crit("It is now safe to turn off your Macintosh.\n");
+	local_irq_disable();
+	while(1);
+}
+
+void mac_reset(void)
+{
+	if (macintosh_config->adb_type == MAC_ADB_II &&
+	    macintosh_config->ident != MAC_MODEL_SE30) {
+		/* need ROMBASE in booter */
+		/* indeed, plus need to MAP THE ROM !! */
+
+		if (mac_bi_data.rombase == 0)
+			mac_bi_data.rombase = 0x40800000;
+
+		/* works on some */
+		rom_reset = (void *) (mac_bi_data.rombase + 0xa);
+
+		local_irq_disable();
+		rom_reset();
+#ifdef CONFIG_ADB_CUDA
+	} else if (macintosh_config->adb_type == MAC_ADB_EGRET ||
+	           macintosh_config->adb_type == MAC_ADB_CUDA) {
+		cuda_restart();
+#endif
+#ifdef CONFIG_ADB_PMU
+	} else if (macintosh_config->adb_type == MAC_ADB_PB2) {
+		pmu_restart();
+#endif
+	} else if (CPU_IS_030) {
+
+		/* 030-specific reset routine.  The idea is general, but the
+		 * specific registers to reset are '030-specific.  Until I
+		 * have a non-030 machine, I can't test anything else.
+		 *  -- C. Scott Ananian <cananian@alumni.princeton.edu>
+		 */
+
+		unsigned long rombase = 0x40000000;
+
+		/* make a 1-to-1 mapping, using the transparent tran. reg. */
+		unsigned long virt = (unsigned long) mac_reset;
+		unsigned long phys = virt_to_phys(mac_reset);
+		unsigned long addr = (phys&0xFF000000)|0x8777;
+		unsigned long offset = phys-virt;
+
+		local_irq_disable(); /* lets not screw this up, ok? */
+		__asm__ __volatile__(".chip 68030\n\t"
+				     "pmove %0,%/tt0\n\t"
+				     ".chip 68k"
+				     : : "m" (addr));
+		/* Now jump to physical address so we can disable MMU */
+		__asm__ __volatile__(
+		    ".chip 68030\n\t"
+		    "lea %/pc@(1f),%/a0\n\t"
+		    "addl %0,%/a0\n\t"/* fixup target address and stack ptr */
+		    "addl %0,%/sp\n\t"
+		    "pflusha\n\t"
+		    "jmp %/a0@\n\t" /* jump into physical memory */
+		    "0:.long 0\n\t" /* a constant zero. */
+		    /* OK.  Now reset everything and jump to reset vector. */
+		    "1:\n\t"
+		    "lea %/pc@(0b),%/a0\n\t"
+		    "pmove %/a0@, %/tc\n\t" /* disable mmu */
+		    "pmove %/a0@, %/tt0\n\t" /* disable tt0 */
+		    "pmove %/a0@, %/tt1\n\t" /* disable tt1 */
+		    "movel #0, %/a0\n\t"
+		    "movec %/a0, %/vbr\n\t" /* clear vector base register */
+		    "movec %/a0, %/cacr\n\t" /* disable caches */
+		    "movel #0x0808,%/a0\n\t"
+		    "movec %/a0, %/cacr\n\t" /* flush i&d caches */
+		    "movew #0x2700,%/sr\n\t" /* set up status register */
+		    "movel %1@(0x0),%/a0\n\t"/* load interrupt stack pointer */
+		    "movec %/a0, %/isp\n\t"
+		    "movel %1@(0x4),%/a0\n\t" /* load reset vector */
+		    "reset\n\t" /* reset external devices */
+		    "jmp %/a0@\n\t" /* jump to the reset vector */
+		    ".chip 68k"
+		    : : "r" (offset), "a" (rombase) : "a0");
+	}
+
+	/* should never get here */
+	pr_crit("Restart failed. Please restart manually.\n");
+	local_irq_disable();
+	while(1);
+}
+
+/*
+ * This function translates seconds since 1970 into a proper date.
+ *
+ * Algorithm cribbed from glibc2.1, __offtime().
+ *
+ * This is roughly same as rtc_time64_to_tm(), which we should probably
+ * use here, but it's only available when CONFIG_RTC_LIB is enabled.
+ */
+#define SECS_PER_MINUTE (60)
+#define SECS_PER_HOUR  (SECS_PER_MINUTE * 60)
+#define SECS_PER_DAY   (SECS_PER_HOUR * 24)
+
+static void unmktime(time64_t time, long offset,
+		     int *yearp, int *monp, int *dayp,
+		     int *hourp, int *minp, int *secp)
+{
+        /* How many days come before each month (0-12).  */
+	static const unsigned short int __mon_yday[2][13] =
+	{
+		/* Normal years.  */
+		{ 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 },
+		/* Leap years.  */
+		{ 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 }
+	};
+	int days, rem, y, wday, yday;
+	const unsigned short int *ip;
+
+	days = div_u64_rem(time, SECS_PER_DAY, &rem);
+	rem += offset;
+	while (rem < 0) {
+		rem += SECS_PER_DAY;
+		--days;
+	}
+	while (rem >= SECS_PER_DAY) {
+		rem -= SECS_PER_DAY;
+		++days;
+	}
+	*hourp = rem / SECS_PER_HOUR;
+	rem %= SECS_PER_HOUR;
+	*minp = rem / SECS_PER_MINUTE;
+	*secp = rem % SECS_PER_MINUTE;
+	/* January 1, 1970 was a Thursday. */
+	wday = (4 + days) % 7; /* Day in the week. Not currently used */
+	if (wday < 0) wday += 7;
+	y = 1970;
+
+#define DIV(a, b) ((a) / (b) - ((a) % (b) < 0))
+#define LEAPS_THRU_END_OF(y) (DIV (y, 4) - DIV (y, 100) + DIV (y, 400))
+#define __isleap(year)	\
+  ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
+
+	while (days < 0 || days >= (__isleap (y) ? 366 : 365))
+	{
+		/* Guess a corrected year, assuming 365 days per year.  */
+		long int yg = y + days / 365 - (days % 365 < 0);
+
+		/* Adjust DAYS and Y to match the guessed year.  */
+		days -= (yg - y) * 365 +
+			LEAPS_THRU_END_OF(yg - 1) - LEAPS_THRU_END_OF(y - 1);
+		y = yg;
+	}
+	*yearp = y - 1900;
+	yday = days; /* day in the year.  Not currently used. */
+	ip = __mon_yday[__isleap(y)];
+	for (y = 11; days < (long int) ip[y]; --y)
+		continue;
+	days -= ip[y];
+	*monp = y;
+	*dayp = days + 1; /* day in the month */
+	return;
+}
+
+/*
+ * Read/write the hardware clock.
+ */
+
+int mac_hwclk(int op, struct rtc_time *t)
+{
+	time64_t now;
+
+	if (!op) { /* read */
+		switch (macintosh_config->adb_type) {
+		case MAC_ADB_IOP:
+		case MAC_ADB_II:
+		case MAC_ADB_PB1:
+			now = via_read_time();
+			break;
+#ifdef CONFIG_ADB_CUDA
+		case MAC_ADB_EGRET:
+		case MAC_ADB_CUDA:
+			now = cuda_get_time();
+			break;
+#endif
+#ifdef CONFIG_ADB_PMU
+		case MAC_ADB_PB2:
+			now = pmu_get_time();
+			break;
+#endif
+		default:
+			now = 0;
+		}
+
+		t->tm_wday = 0;
+		unmktime(now, 0,
+			 &t->tm_year, &t->tm_mon, &t->tm_mday,
+			 &t->tm_hour, &t->tm_min, &t->tm_sec);
+		pr_debug("%s: read %ptR\n", __func__, t);
+	} else { /* write */
+		pr_debug("%s: tried to write %ptR\n", __func__, t);
+
+		switch (macintosh_config->adb_type) {
+		case MAC_ADB_IOP:
+		case MAC_ADB_II:
+		case MAC_ADB_PB1:
+			via_set_rtc_time(t);
+			break;
+#ifdef CONFIG_ADB_CUDA
+		case MAC_ADB_EGRET:
+		case MAC_ADB_CUDA:
+			cuda_set_rtc_time(t);
+			break;
+#endif
+#ifdef CONFIG_ADB_PMU
+		case MAC_ADB_PB2:
+			pmu_set_rtc_time(t);
+			break;
+#endif
+		default:
+			return -ENODEV;
+		}
+	}
+	return 0;
+}