Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 211 insertions, 0 deletions

diff --git a/arch/mips/loongson64/init.c b/arch/mips/loongson64/init.c
new file mode 100644
index 000000000..ee8de1735
--- /dev/null
+++ b/arch/mips/loongson64/init.c
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ */
+
+#include <linux/irqchip.h>
+#include <linux/logic_pio.h>
+#include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <asm/bootinfo.h>
+#include <asm/traps.h>
+#include <asm/smp-ops.h>
+#include <asm/cacheflush.h>
+#include <asm/fw/fw.h>
+
+#include <loongson.h>
+#include <boot_param.h>
+
+#define NODE_ID_OFFSET_ADDR	((void __iomem *)TO_UNCAC(0x1001041c))
+
+u32 node_id_offset;
+
+static void __init mips_nmi_setup(void)
+{
+	void *base;
+
+	base = (void *)(CAC_BASE + 0x380);
+	memcpy(base, except_vec_nmi, 0x80);
+	flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
+}
+
+void ls7a_early_config(void)
+{
+	node_id_offset = ((readl(NODE_ID_OFFSET_ADDR) >> 8) & 0x1f) + 36;
+}
+
+void rs780e_early_config(void)
+{
+	node_id_offset = 37;
+}
+
+void virtual_early_config(void)
+{
+	node_id_offset = 44;
+}
+
+void __init szmem(unsigned int node)
+{
+	u32 i, mem_type;
+	static unsigned long num_physpages;
+	u64 node_id, node_psize, start_pfn, end_pfn, mem_start, mem_size;
+
+	/* Otherwise come from DTB */
+	if (loongson_sysconf.fw_interface != LOONGSON_LEFI)
+		return;
+
+	/* Parse memory information and activate */
+	for (i = 0; i < loongson_memmap->nr_map; i++) {
+		node_id = loongson_memmap->map[i].node_id;
+		if (node_id != node)
+			continue;
+
+		mem_type = loongson_memmap->map[i].mem_type;
+		mem_size = loongson_memmap->map[i].mem_size;
+		mem_start = loongson_memmap->map[i].mem_start;
+
+		switch (mem_type) {
+		case SYSTEM_RAM_LOW:
+		case SYSTEM_RAM_HIGH:
+			start_pfn = ((node_id << 44) + mem_start) >> PAGE_SHIFT;
+			node_psize = (mem_size << 20) >> PAGE_SHIFT;
+			end_pfn  = start_pfn + node_psize;
+			num_physpages += node_psize;
+			pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
+				(u32)node_id, mem_type, mem_start, mem_size);
+			pr_info("       start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
+				start_pfn, end_pfn, num_physpages);
+			memblock_add_node(PFN_PHYS(start_pfn),
+					  PFN_PHYS(node_psize), node,
+					  MEMBLOCK_NONE);
+			break;
+		case SYSTEM_RAM_RESERVED:
+			pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
+				(u32)node_id, mem_type, mem_start, mem_size);
+			memblock_reserve(((node_id << 44) + mem_start), mem_size << 20);
+			break;
+		}
+	}
+}
+
+#ifndef CONFIG_NUMA
+static void __init prom_init_memory(void)
+{
+	szmem(0);
+}
+#endif
+
+void __init prom_init(void)
+{
+	fw_init_cmdline();
+
+	if (fw_arg2 == 0 || (fdt_magic(fw_arg2) == FDT_MAGIC)) {
+		loongson_sysconf.fw_interface = LOONGSON_DTB;
+		prom_dtb_init_env();
+	} else {
+		loongson_sysconf.fw_interface = LOONGSON_LEFI;
+		prom_lefi_init_env();
+	}
+
+	/* init base address of io space */
+	set_io_port_base(PCI_IOBASE);
+
+	if (loongson_sysconf.early_config)
+		loongson_sysconf.early_config();
+
+#ifdef CONFIG_NUMA
+	prom_init_numa_memory();
+#else
+	prom_init_memory();
+#endif
+
+	/* Hardcode to CPU UART 0 */
+	if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R)
+		setup_8250_early_printk_port(TO_UNCAC(LOONGSON_REG_BASE), 0, 1024);
+	else
+		setup_8250_early_printk_port(TO_UNCAC(LOONGSON_REG_BASE + 0x1e0), 0, 1024);
+
+	register_smp_ops(&loongson3_smp_ops);
+	board_nmi_handler_setup = mips_nmi_setup;
+}
+
+static int __init add_legacy_isa_io(struct fwnode_handle *fwnode, resource_size_t hw_start,
+				    resource_size_t size)
+{
+	int ret = 0;
+	struct logic_pio_hwaddr *range;
+	unsigned long vaddr;
+
+	range = kzalloc(sizeof(*range), GFP_ATOMIC);
+	if (!range)
+		return -ENOMEM;
+
+	range->fwnode = fwnode;
+	range->size = size = round_up(size, PAGE_SIZE);
+	range->hw_start = hw_start;
+	range->flags = LOGIC_PIO_CPU_MMIO;
+
+	ret = logic_pio_register_range(range);
+	if (ret) {
+		kfree(range);
+		return ret;
+	}
+
+	/* Legacy ISA must placed at the start of PCI_IOBASE */
+	if (range->io_start != 0) {
+		logic_pio_unregister_range(range);
+		kfree(range);
+		return -EINVAL;
+	}
+
+	vaddr = PCI_IOBASE + range->io_start;
+
+	ioremap_page_range(vaddr, vaddr + size, hw_start, pgprot_device(PAGE_KERNEL));
+
+	return 0;
+}
+
+static __init void reserve_pio_range(void)
+{
+	struct device_node *np;
+
+	for_each_node_by_name(np, "isa") {
+		struct of_range range;
+		struct of_range_parser parser;
+
+		pr_info("ISA Bridge: %pOF\n", np);
+
+		if (of_range_parser_init(&parser, np)) {
+			pr_info("Failed to parse resources.\n");
+			of_node_put(np);
+			break;
+		}
+
+		for_each_of_range(&parser, &range) {
+			switch (range.flags & IORESOURCE_TYPE_BITS) {
+			case IORESOURCE_IO:
+				pr_info(" IO 0x%016llx..0x%016llx  ->  0x%016llx\n",
+					range.cpu_addr,
+					range.cpu_addr + range.size - 1,
+					range.bus_addr);
+				if (add_legacy_isa_io(&np->fwnode, range.cpu_addr, range.size))
+					pr_warn("Failed to reserve legacy IO in Logic PIO\n");
+				break;
+			case IORESOURCE_MEM:
+				pr_info(" MEM 0x%016llx..0x%016llx  ->  0x%016llx\n",
+					range.cpu_addr,
+					range.cpu_addr + range.size - 1,
+					range.bus_addr);
+				break;
+			}
+		}
+	}
+}
+
+void __init arch_init_irq(void)
+{
+	reserve_pio_range();
+	irqchip_init();
+}