Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 147 insertions, 0 deletions

diff --git a/arch/parisc/include/asm/hash.h b/arch/parisc/include/asm/hash.h
new file mode 100644
index 000000000..525950ed8
--- /dev/null
+++ b/arch/parisc/include/asm/hash.h
@@ -0,0 +1,147 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_HASH_H
+#define _ASM_HASH_H
+
+/*
+ * HP-PA only implements integer multiply in the FPU.  However, for
+ * integer multiplies by constant, it has a number of shift-and-add
+ * (but no shift-and-subtract, sigh!) instructions that a compiler
+ * can synthesize a code sequence with.
+ *
+ * Unfortunately, GCC isn't very efficient at using them.  For example
+ * it uses three instructions for "x *= 21" when only two are needed.
+ * But we can find a sequence manually.
+ */
+
+#define HAVE_ARCH__HASH_32 1
+
+/*
+ * This is a multiply by GOLDEN_RATIO_32 = 0x61C88647 optimized for the
+ * PA7100 pairing rules.  This is an in-order 2-way superscalar processor.
+ * Only one instruction in a pair may be a shift (by more than 3 bits),
+ * but other than that, simple ALU ops (including shift-and-add by up
+ * to 3 bits) may be paired arbitrarily.
+ *
+ * PA8xxx processors also dual-issue ALU instructions, although with
+ * fewer constraints, so this schedule is good for them, too.
+ *
+ * This 6-step sequence was found by Yevgen Voronenko's implementation
+ * of the Hcub algorithm at http://spiral.ece.cmu.edu/mcm/gen.html.
+ */
+static inline u32 __attribute_const__ __hash_32(u32 x)
+{
+	u32 a, b, c;
+
+	/*
+	 * Phase 1: Compute  a = (x << 19) + x,
+	 * b = (x << 9) + a, c = (x << 23) + b.
+	 */
+	a = x << 19;		/* Two shifts can't be paired */
+	b = x << 9;	a += x;
+	c = x << 23;	b += a;
+			c += b;
+	/* Phase 2: Return (b<<11) + (c<<6) + (a<<3) - c */
+	b <<= 11;
+	a += c << 3;	b -= c;
+	return (a << 3) + b;
+}
+
+#if BITS_PER_LONG == 64
+
+#define HAVE_ARCH_HASH_64 1
+
+/*
+ * Finding a good shift-and-add chain for GOLDEN_RATIO_64 is tricky,
+ * because available software for the purpose chokes on constants this
+ * large.  (It's mostly designed for compiling FIR filter coefficients
+ * into FPGAs.)
+ *
+ * However, Jason Thong pointed out a work-around.  The Hcub software
+ * (http://spiral.ece.cmu.edu/mcm/gen.html) is designed for *multiple*
+ * constant multiplication, and is good at finding shift-and-add chains
+ * which share common terms.
+ *
+ * Looking at 0x0x61C8864680B583EB in binary:
+ * 0110000111001000100001100100011010000000101101011000001111101011
+ *  \______________/    \__________/       \_______/     \________/
+ *   \____________________________/         \____________________/
+ * you can see the non-zero bits are divided into several well-separated
+ * blocks.  Hcub can find algorithms for those terms separately, which
+ * can then be shifted and added together.
+ *
+ * Dividing the input into 2, 3 or 4 blocks, Hcub can find solutions
+ * with 10, 9 or 8 adds, respectively, making a total of 11 for the
+ * whole number.
+ *
+ * Using just two large blocks, 0xC3910C8D << 31 in the high bits,
+ * and 0xB583EB in the low bits, produces as good an algorithm as any,
+ * and with one more small shift than alternatives.
+ *
+ * The high bits are a larger number and more work to compute, as well
+ * as needing one extra cycle to shift left 31 bits before the final
+ * addition, so they are the critical path for scheduling.  The low bits
+ * can fit into the scheduling slots left over.
+ */
+
+
+/*
+ * This _ASSIGN(dst, src) macro performs "dst = src", but prevents GCC
+ * from inferring anything about the value assigned to "dest".
+ *
+ * This prevents it from mis-optimizing certain sequences.
+ * In particular, gcc is annoyingly eager to combine consecutive shifts.
+ * Given "x <<= 19; y += x; z += x << 1;", GCC will turn this into
+ * "y += x << 19; z += x << 20;" even though the latter sequence needs
+ * an additional instruction and temporary register.
+ *
+ * Because no actual assembly code is generated, this construct is
+ * usefully portable across all GCC platforms, and so can be test-compiled
+ * on non-PA systems.
+ *
+ * In two places, additional unused input dependencies are added.  This
+ * forces GCC's scheduling so it does not rearrange instructions too much.
+ * Because the PA-8xxx is out of order, I'm not sure how much this matters,
+ * but why make it more difficult for the processor than necessary?
+ */
+#define _ASSIGN(dst, src, ...) asm("" : "=r" (dst) : "0" (src), ##__VA_ARGS__)
+
+/*
+ * Multiply by GOLDEN_RATIO_64 = 0x0x61C8864680B583EB using a heavily
+ * optimized shift-and-add sequence.
+ *
+ * Without the final shift, the multiply proper is 19 instructions,
+ * 10 cycles and uses only 4 temporaries.  Whew!
+ *
+ * You are not expected to understand this.
+ */
+static __always_inline u32 __attribute_const__
+hash_64(u64 a, unsigned int bits)
+{
+	u64 b, c, d;
+
+	/*
+	 * Encourage GCC to move a dynamic shift to %sar early,
+	 * thereby freeing up an additional temporary register.
+	 */
+	if (!__builtin_constant_p(bits))
+		asm("" : "=q" (bits) : "0" (64 - bits));
+	else
+		bits = 64 - bits;
+
+	_ASSIGN(b, a*5);	c = a << 13;
+	b = (b << 2) + a;	_ASSIGN(d, a << 17);
+	a = b + (a << 1);	c += d;
+	d = a << 10;		_ASSIGN(a, a << 19);
+	d = a - d;		_ASSIGN(a, a << 4, "X" (d));
+	c += b;			a += b;
+	d -= c;			c += a << 1;
+	a += c << 3;		_ASSIGN(b, b << (7+31), "X" (c), "X" (d));
+	a <<= 31;		b += d;
+	a += b;
+	return a >> bits;
+}
+#undef _ASSIGN	/* We're a widely-used header file, so don't litter! */
+
+#endif /* BITS_PER_LONG == 64 */
+
+#endif /* _ASM_HASH_H */