Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 473 insertions, 0 deletions

diff --git a/arch/parisc/math-emu/sgl_float.h b/arch/parisc/math-emu/sgl_float.h
new file mode 100644
index 000000000..6ec2662cc
--- /dev/null
+++ b/arch/parisc/math-emu/sgl_float.h
@@ -0,0 +1,473 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Linux/PA-RISC Project (http://www.parisc-linux.org/)
+ *
+ * Floating-point emulation code
+ *  Copyright (C) 2001 Hewlett-Packard (Paul Bame) <bame@debian.org>
+ */
+
+#ifdef __NO_PA_HDRS
+    PA header file -- do not include this header file for non-PA builds.
+#endif
+
+/* 32-bit word grabbing functions */
+#define Sgl_firstword(value) Sall(value)
+#define Sgl_secondword(value) dummy_location
+#define Sgl_thirdword(value) dummy_location
+#define Sgl_fourthword(value) dummy_location
+
+#define Sgl_sign(object) Ssign(object)
+#define Sgl_exponent(object) Sexponent(object)
+#define Sgl_signexponent(object) Ssignexponent(object)
+#define Sgl_mantissa(object) Smantissa(object)
+#define Sgl_exponentmantissa(object) Sexponentmantissa(object)
+#define Sgl_all(object) Sall(object)
+
+/* sgl_and_signs ANDs the sign bits of each argument and puts the result
+ * into the first argument. sgl_or_signs ors those same sign bits */
+#define Sgl_and_signs( src1dst, src2)		\
+    Sall(src1dst) = (Sall(src2)|~((unsigned int)1<<31)) & Sall(src1dst)
+#define Sgl_or_signs( src1dst, src2)		\
+    Sall(src1dst) = (Sall(src2)&((unsigned int)1<<31)) | Sall(src1dst)
+
+/* The hidden bit is always the low bit of the exponent */
+#define Sgl_clear_exponent_set_hidden(srcdst) Deposit_sexponent(srcdst,1)
+#define Sgl_clear_signexponent_set_hidden(srcdst) \
+    Deposit_ssignexponent(srcdst,1)
+#define Sgl_clear_sign(srcdst) Sall(srcdst) &= ~((unsigned int)1<<31)
+#define Sgl_clear_signexponent(srcdst) Sall(srcdst) &= 0x007fffff
+
+/* varamount must be less than 32 for the next three functions */
+#define Sgl_rightshift(srcdst, varamount)	\
+    Sall(srcdst) >>= varamount
+#define Sgl_leftshift(srcdst, varamount)	\
+    Sall(srcdst) <<= varamount
+#define Sgl_rightshift_exponentmantissa(srcdst, varamount) \
+    Sall(srcdst) = \
+	(Sexponentmantissa(srcdst) >> varamount) | \
+	(Sall(srcdst) & ((unsigned int)1<<31))
+
+#define Sgl_leftshiftby1_withextent(left,right,result) \
+    Shiftdouble(Sall(left),Extall(right),31,Sall(result))
+    
+#define Sgl_rightshiftby1_withextent(left,right,dst)		\
+    Shiftdouble(Sall(left),Extall(right),1,Extall(right))
+#define Sgl_arithrightshiftby1(srcdst)	\
+    Sall(srcdst) = (int)Sall(srcdst) >> 1
+    
+/* Sign extend the sign bit with an integer destination */
+#define Sgl_signextendedsign(value) Ssignedsign(value)
+
+#define Sgl_isone_hidden(sgl_value) (Shidden(sgl_value))
+#define Sgl_increment(sgl_value) Sall(sgl_value) += 1
+#define Sgl_increment_mantissa(sgl_value) \
+    Deposit_smantissa(sgl_value,sgl_value+1)
+#define Sgl_decrement(sgl_value) Sall(sgl_value) -= 1
+
+#define Sgl_isone_sign(sgl_value) (Is_ssign(sgl_value)!=0)
+#define Sgl_isone_hiddenoverflow(sgl_value) \
+    (Is_shiddenoverflow(sgl_value)!=0)
+#define Sgl_isone_lowmantissa(sgl_value) (Is_slow(sgl_value)!=0)
+#define Sgl_isone_signaling(sgl_value) (Is_ssignaling(sgl_value)!=0)
+#define Sgl_is_signalingnan(sgl_value) (Ssignalingnan(sgl_value)==0x1ff)
+#define Sgl_isnotzero(sgl_value) (Sall(sgl_value)!=0)
+#define Sgl_isnotzero_hiddenhigh7mantissa(sgl_value) \
+    (Shiddenhigh7mantissa(sgl_value)!=0)
+#define Sgl_isnotzero_low4(sgl_value) (Slow4(sgl_value)!=0)
+#define Sgl_isnotzero_exponent(sgl_value) (Sexponent(sgl_value)!=0)
+#define Sgl_isnotzero_mantissa(sgl_value) (Smantissa(sgl_value)!=0)
+#define Sgl_isnotzero_exponentmantissa(sgl_value) \
+    (Sexponentmantissa(sgl_value)!=0)
+#define Sgl_iszero(sgl_value) (Sall(sgl_value)==0)
+#define Sgl_iszero_signaling(sgl_value) (Is_ssignaling(sgl_value)==0)
+#define Sgl_iszero_hidden(sgl_value) (Is_shidden(sgl_value)==0)
+#define Sgl_iszero_hiddenoverflow(sgl_value) \
+    (Is_shiddenoverflow(sgl_value)==0)
+#define Sgl_iszero_hiddenhigh3mantissa(sgl_value) \
+    (Shiddenhigh3mantissa(sgl_value)==0)
+#define Sgl_iszero_hiddenhigh7mantissa(sgl_value) \
+    (Shiddenhigh7mantissa(sgl_value)==0)
+#define Sgl_iszero_sign(sgl_value) (Is_ssign(sgl_value)==0)
+#define Sgl_iszero_exponent(sgl_value) (Sexponent(sgl_value)==0)
+#define Sgl_iszero_mantissa(sgl_value) (Smantissa(sgl_value)==0)
+#define Sgl_iszero_exponentmantissa(sgl_value) \
+    (Sexponentmantissa(sgl_value)==0)
+#define Sgl_isinfinity_exponent(sgl_value) 		\
+    (Sgl_exponent(sgl_value)==SGL_INFINITY_EXPONENT)
+#define Sgl_isnotinfinity_exponent(sgl_value) 		\
+    (Sgl_exponent(sgl_value)!=SGL_INFINITY_EXPONENT)
+#define Sgl_isinfinity(sgl_value)			\
+    (Sgl_exponent(sgl_value)==SGL_INFINITY_EXPONENT &&	\
+    Sgl_mantissa(sgl_value)==0)
+#define Sgl_isnan(sgl_value)				\
+    (Sgl_exponent(sgl_value)==SGL_INFINITY_EXPONENT &&	\
+    Sgl_mantissa(sgl_value)!=0)
+#define Sgl_isnotnan(sgl_value)				\
+    (Sgl_exponent(sgl_value)!=SGL_INFINITY_EXPONENT ||	\
+    Sgl_mantissa(sgl_value)==0)
+#define Sgl_islessthan(sgl_op1,sgl_op2)			\
+    (Sall(sgl_op1) < Sall(sgl_op2))
+#define Sgl_isgreaterthan(sgl_op1,sgl_op2)		\
+    (Sall(sgl_op1) > Sall(sgl_op2))
+#define Sgl_isnotlessthan(sgl_op1,sgl_op2)		\
+    (Sall(sgl_op1) >= Sall(sgl_op2))
+#define Sgl_isequal(sgl_op1,sgl_op2)			\
+    (Sall(sgl_op1) == Sall(sgl_op2))
+
+#define Sgl_leftshiftby8(sgl_value) \
+    Sall(sgl_value) <<= 8
+#define Sgl_leftshiftby4(sgl_value) \
+    Sall(sgl_value) <<= 4
+#define Sgl_leftshiftby3(sgl_value) \
+    Sall(sgl_value) <<= 3
+#define Sgl_leftshiftby2(sgl_value) \
+    Sall(sgl_value) <<= 2
+#define Sgl_leftshiftby1(sgl_value) \
+    Sall(sgl_value) <<= 1
+#define Sgl_rightshiftby1(sgl_value) \
+    Sall(sgl_value) >>= 1
+#define Sgl_rightshiftby4(sgl_value) \
+    Sall(sgl_value) >>= 4
+#define Sgl_rightshiftby8(sgl_value) \
+    Sall(sgl_value) >>= 8
+    
+#define Sgl_ismagnitudeless(signlessleft,signlessright)			\
+/*  unsigned int signlessleft, signlessright; */			\
+      (signlessleft < signlessright)  
+    
+
+#define Sgl_copytoint_exponentmantissa(source,dest)     \
+    dest = Sexponentmantissa(source)
+
+/* A quiet NaN has the high mantissa bit clear and at least on other (in this
+ * case the adjacent bit) bit set. */
+#define Sgl_set_quiet(sgl_value) Deposit_shigh2mantissa(sgl_value,1)
+#define Sgl_set_exponent(sgl_value,exp) Deposit_sexponent(sgl_value,exp)
+
+#define Sgl_set_mantissa(dest,value) Deposit_smantissa(dest,value)
+#define Sgl_set_exponentmantissa(dest,value) \
+    Deposit_sexponentmantissa(dest,value)
+
+/*  An infinity is represented with the max exponent and a zero mantissa */
+#define Sgl_setinfinity_exponent(sgl_value) \
+    Deposit_sexponent(sgl_value,SGL_INFINITY_EXPONENT)
+#define Sgl_setinfinity_exponentmantissa(sgl_value)	\
+    Deposit_sexponentmantissa(sgl_value, \
+	(SGL_INFINITY_EXPONENT << (32-(1+SGL_EXP_LENGTH))))
+#define Sgl_setinfinitypositive(sgl_value)		\
+    Sall(sgl_value) = (SGL_INFINITY_EXPONENT << (32-(1+SGL_EXP_LENGTH)))
+#define Sgl_setinfinitynegative(sgl_value)		\
+    Sall(sgl_value) = (SGL_INFINITY_EXPONENT << (32-(1+SGL_EXP_LENGTH))) \
+    | ((unsigned int)1<<31)
+#define Sgl_setinfinity(sgl_value,sign)					\
+    Sall(sgl_value) = (SGL_INFINITY_EXPONENT << (32-(1+SGL_EXP_LENGTH))) | \
+     ((unsigned int)sign << 31)
+#define Sgl_sethigh4bits(sgl_value, extsign)  \
+    Deposit_shigh4(sgl_value,extsign)
+#define Sgl_set_sign(sgl_value,sign) Deposit_ssign(sgl_value,sign)
+#define Sgl_invert_sign(sgl_value)  \
+    Deposit_ssign(sgl_value,~Ssign(sgl_value))
+#define Sgl_setone_sign(sgl_value) Deposit_ssign(sgl_value,1)
+#define Sgl_setone_lowmantissa(sgl_value) Deposit_slow(sgl_value,1)
+#define Sgl_setzero_sign(sgl_value)  Sall(sgl_value) &= 0x7fffffff
+#define Sgl_setzero_exponent(sgl_value) Sall(sgl_value) &= 0x807fffff
+#define Sgl_setzero_mantissa(sgl_value) Sall(sgl_value) &= 0xff800000
+#define Sgl_setzero_exponentmantissa(sgl_value)  Sall(sgl_value) &= 0x80000000
+#define Sgl_setzero(sgl_value) Sall(sgl_value) = 0
+#define Sgl_setnegativezero(sgl_value) Sall(sgl_value) = (unsigned int)1 << 31
+
+/* Use following macro for both overflow & underflow conditions */
+#define ovfl -
+#define unfl +
+#define Sgl_setwrapped_exponent(sgl_value,exponent,op) \
+    Deposit_sexponent(sgl_value,(exponent op SGL_WRAP))
+
+#define Sgl_setlargestpositive(sgl_value) 				\
+    Sall(sgl_value) = ((SGL_EMAX+SGL_BIAS) << (32-(1+SGL_EXP_LENGTH)))	\
+                      | ((1<<(32-(1+SGL_EXP_LENGTH))) - 1 )
+#define Sgl_setlargestnegative(sgl_value)				\
+    Sall(sgl_value) = ((SGL_EMAX+SGL_BIAS) << (32-(1+SGL_EXP_LENGTH)))	\
+                      | ((1<<(32-(1+SGL_EXP_LENGTH))) - 1 )		\
+		      | ((unsigned int)1<<31)
+
+#define Sgl_setnegativeinfinity(sgl_value)	\
+    Sall(sgl_value) = 				\
+    ((1<<SGL_EXP_LENGTH) | SGL_INFINITY_EXPONENT) << (32-(1+SGL_EXP_LENGTH))
+#define Sgl_setlargest(sgl_value,sign) 					\
+    Sall(sgl_value) = (unsigned int)sign << 31 |			\
+        (((SGL_EMAX+SGL_BIAS) << (32-(1+SGL_EXP_LENGTH)))		\
+	  | ((1 << (32-(1+SGL_EXP_LENGTH))) - 1 ))
+#define Sgl_setlargest_exponentmantissa(sgl_value)			\
+    Sall(sgl_value) = Sall(sgl_value) & ((unsigned int)1<<31) |		\
+        (((SGL_EMAX+SGL_BIAS) << (32-(1+SGL_EXP_LENGTH)))		\
+	  | ((1 << (32-(1+SGL_EXP_LENGTH))) - 1 ))
+
+/* The high bit is always zero so arithmetic or logical shifts will work. */
+#define Sgl_right_align(srcdst,shift,extent)				\
+    /* sgl_floating_point srcdst; int shift; extension extent */	\
+    if (shift < 32) {							\
+	Extall(extent) = Sall(srcdst) << (32-(shift));			\
+    	Sall(srcdst) >>= shift;						\
+    }									\
+    else {								\
+	Extall(extent) = Sall(srcdst);					\
+	Sall(srcdst) = 0;						\
+    }
+#define Sgl_hiddenhigh3mantissa(sgl_value) Shiddenhigh3mantissa(sgl_value)
+#define Sgl_hidden(sgl_value) Shidden(sgl_value)
+#define Sgl_lowmantissa(sgl_value) Slow(sgl_value)
+
+/* The left argument is never smaller than the right argument */
+#define Sgl_subtract(sgl_left,sgl_right,sgl_result) \
+    Sall(sgl_result) = Sall(sgl_left) - Sall(sgl_right)
+
+/* Subtract right augmented with extension from left augmented with zeros and
+ * store into result and extension. */
+#define Sgl_subtract_withextension(left,right,extent,result)		\
+    /* sgl_floating_point left,right,result; extension extent */	\
+  Sgl_subtract(left,right,result);					\
+  if((Extall(extent) = 0-Extall(extent)))				\
+      Sall(result) = Sall(result)-1
+
+#define Sgl_addition(sgl_left,sgl_right,sgl_result) \
+    Sall(sgl_result) = Sall(sgl_left) + Sall(sgl_right)
+
+#define Sgl_xortointp1(left,right,result)			\
+    result = Sall(left) XOR Sall(right);
+
+#define Sgl_xorfromintp1(left,right,result)			\
+    Sall(result) = left XOR Sall(right)
+
+/* Need to Initialize */
+#define Sgl_makequietnan(dest)						\
+    Sall(dest) = ((SGL_EMAX+SGL_BIAS)+1)<< (32-(1+SGL_EXP_LENGTH))	\
+                 | (1<<(32-(1+SGL_EXP_LENGTH+2)))
+#define Sgl_makesignalingnan(dest)					\
+    Sall(dest) = ((SGL_EMAX+SGL_BIAS)+1)<< (32-(1+SGL_EXP_LENGTH))	\
+                 | (1<<(32-(1+SGL_EXP_LENGTH+1)))
+
+#define Sgl_normalize(sgl_opnd,exponent)			\
+	while(Sgl_iszero_hiddenhigh7mantissa(sgl_opnd)) {	\
+		Sgl_leftshiftby8(sgl_opnd);			\
+		exponent -= 8;					\
+	}							\
+	if(Sgl_iszero_hiddenhigh3mantissa(sgl_opnd)) {		\
+		Sgl_leftshiftby4(sgl_opnd);			\
+		exponent -= 4;					\
+	}							\
+	while(Sgl_iszero_hidden(sgl_opnd)) {			\
+		Sgl_leftshiftby1(sgl_opnd);			\
+		exponent -= 1;					\
+	}
+
+#define Sgl_setoverflow(sgl_opnd)				\
+	/* set result to infinity or largest number */		\
+	switch (Rounding_mode()) {				\
+		case ROUNDPLUS:					\
+			if (Sgl_isone_sign(sgl_opnd)) {		\
+				Sgl_setlargestnegative(sgl_opnd); \
+			}					\
+			else {					\
+				Sgl_setinfinitypositive(sgl_opnd); \
+			}					\
+			break;					\
+		case ROUNDMINUS:				\
+			if (Sgl_iszero_sign(sgl_opnd)) {	\
+				Sgl_setlargestpositive(sgl_opnd); \
+			}					\
+			else {					\
+				Sgl_setinfinitynegative(sgl_opnd); \
+			}					\
+			break;					\
+		case ROUNDNEAREST:				\
+			Sgl_setinfinity_exponentmantissa(sgl_opnd); \
+			break;					\
+		case ROUNDZERO:					\
+			Sgl_setlargest_exponentmantissa(sgl_opnd); \
+	}
+
+#define Sgl_denormalize(opnd,exponent,guard,sticky,inexact)		\
+	Sgl_clear_signexponent_set_hidden(opnd);			\
+	if (exponent >= (1 - SGL_P)) {					\
+		guard = (Sall(opnd) >> -exponent) & 1;			\
+		if (exponent < 0) sticky |= Sall(opnd) << (32+exponent); \
+		inexact = guard | sticky;				\
+		Sall(opnd) >>= (1-exponent);				\
+	}								\
+	else {								\
+		guard = 0;						\
+		sticky |= Sall(opnd);					\
+		inexact = sticky;					\
+		Sgl_setzero(opnd);					\
+	}
+
+/* 
+ * The fused multiply add instructions requires a single extended format,
+ * with 48 bits of mantissa.
+ */
+#define SGLEXT_THRESHOLD 48
+
+#define Sglext_setzero(valA,valB)	\
+    Sextallp1(valA) = 0; Sextallp2(valB) = 0
+
+#define Sglext_isnotzero_mantissap2(valB) (Sextallp2(valB)!=0)
+#define Sglext_isone_lowp1(val) (Sextlowp1(val)!=0)
+#define Sglext_isone_highp2(val) (Sexthighp2(val)!=0)
+#define Sglext_isnotzero_low31p2(val) (Sextlow31p2(val)!=0)
+#define Sglext_iszero(valA,valB) (Sextallp1(valA)==0 && Sextallp2(valB)==0)
+
+#define Sgl_copytoptr(src,destptr) *destptr = src
+#define Sgl_copyfromptr(srcptr,dest) dest = *srcptr
+#define Sglext_copy(srca,srcb,desta,destb) \
+    Sextallp1(desta) = Sextallp1(srca);	\
+    Sextallp2(destb) = Sextallp2(srcb)
+#define Sgl_copyto_sglext(src1,dest1,dest2) \
+	Sextallp1(dest1) = Sall(src1); Sextallp2(dest2) = 0
+
+#define Sglext_swap_lower(leftp2,rightp2)  \
+    Sextallp2(leftp2)  = Sextallp2(leftp2) XOR Sextallp2(rightp2);  \
+    Sextallp2(rightp2) = Sextallp2(leftp2) XOR Sextallp2(rightp2);  \
+    Sextallp2(leftp2)  = Sextallp2(leftp2) XOR Sextallp2(rightp2)
+
+#define Sglext_setone_lowmantissap2(value) Deposit_dlowp2(value,1)
+
+/* The high bit is always zero so arithmetic or logical shifts will work. */
+#define Sglext_right_align(srcdstA,srcdstB,shift) \
+  {int shiftamt, sticky;						\
+    shiftamt = shift % 32;						\
+    sticky = 0;								\
+    switch (shift/32) {							\
+     case 0: if (shiftamt > 0) {					\
+	        sticky = Sextallp2(srcdstB) << 32 - (shiftamt);		\
+                Variable_shift_double(Sextallp1(srcdstA),		\
+		 Sextallp2(srcdstB),shiftamt,Sextallp2(srcdstB));	\
+	        Sextallp1(srcdstA) >>= shiftamt;			\
+	     }								\
+	     break;							\
+     case 1: if (shiftamt > 0) {					\
+	        sticky = (Sextallp1(srcdstA) << 32 - (shiftamt)) |	\
+			 Sextallp2(srcdstB);				\
+	     }								\
+	     else {							\
+		sticky = Sextallp2(srcdstB);				\
+	     }								\
+	     Sextallp2(srcdstB) = Sextallp1(srcdstA) >> shiftamt;	\
+	     Sextallp1(srcdstA) = 0;					\
+	     break;							\
+    }									\
+    if (sticky) Sglext_setone_lowmantissap2(srcdstB);			\
+  }
+
+/* The left argument is never smaller than the right argument */
+#define Sglext_subtract(lefta,leftb,righta,rightb,resulta,resultb) \
+    if( Sextallp2(rightb) > Sextallp2(leftb) ) Sextallp1(lefta)--; \
+    Sextallp2(resultb) = Sextallp2(leftb) - Sextallp2(rightb);	\
+    Sextallp1(resulta) = Sextallp1(lefta) - Sextallp1(righta)
+
+#define Sglext_addition(lefta,leftb,righta,rightb,resulta,resultb) \
+    /* If the sum of the low words is less than either source, then \
+     * an overflow into the next word occurred. */ \
+    if ((Sextallp2(resultb) = Sextallp2(leftb)+Sextallp2(rightb)) < \
+        Sextallp2(rightb)) \
+	    Sextallp1(resulta) = Sextallp1(lefta)+Sextallp1(righta)+1; \
+    else Sextallp1(resulta) = Sextallp1(lefta)+Sextallp1(righta)
+
+
+#define Sglext_arithrightshiftby1(srcdstA,srcdstB)	\
+    Shiftdouble(Sextallp1(srcdstA),Sextallp2(srcdstB),1,Sextallp2(srcdstB)); \
+    Sextallp1(srcdstA) = (int)Sextallp1(srcdstA) >> 1
+   
+#define Sglext_leftshiftby8(valA,valB) \
+    Shiftdouble(Sextallp1(valA),Sextallp2(valB),24,Sextallp1(valA)); \
+    Sextallp2(valB) <<= 8
+#define Sglext_leftshiftby4(valA,valB) \
+    Shiftdouble(Sextallp1(valA),Sextallp2(valB),28,Sextallp1(valA)); \
+    Sextallp2(valB) <<= 4
+#define Sglext_leftshiftby3(valA,valB) \
+    Shiftdouble(Sextallp1(valA),Sextallp2(valB),29,Sextallp1(valA)); \
+    Sextallp2(valB) <<= 3
+#define Sglext_leftshiftby2(valA,valB) \
+    Shiftdouble(Sextallp1(valA),Sextallp2(valB),30,Sextallp1(valA)); \
+    Sextallp2(valB) <<= 2
+#define Sglext_leftshiftby1(valA,valB) \
+    Shiftdouble(Sextallp1(valA),Sextallp2(valB),31,Sextallp1(valA)); \
+    Sextallp2(valB) <<= 1
+
+#define Sglext_rightshiftby4(valueA,valueB) \
+    Shiftdouble(Sextallp1(valueA),Sextallp2(valueB),4,Sextallp2(valueB)); \
+    Sextallp1(valueA) >>= 4
+#define Sglext_rightshiftby3(valueA,valueB) \
+    Shiftdouble(Sextallp1(valueA),Sextallp2(valueB),3,Sextallp2(valueB)); \
+    Sextallp1(valueA) >>= 3
+#define Sglext_rightshiftby1(valueA,valueB) \
+    Shiftdouble(Sextallp1(valueA),Sextallp2(valueB),1,Sextallp2(valueB)); \
+    Sextallp1(valueA) >>= 1
+
+#define Sglext_xortointp1(left,right,result) Sgl_xortointp1(left,right,result)
+#define Sglext_xorfromintp1(left,right,result) \
+	Sgl_xorfromintp1(left,right,result)
+#define Sglext_copytoint_exponentmantissa(src,dest) \
+	Sgl_copytoint_exponentmantissa(src,dest)
+#define Sglext_ismagnitudeless(signlessleft,signlessright) \
+	Sgl_ismagnitudeless(signlessleft,signlessright)
+
+#define Sglext_set_sign(dbl_value,sign)  Sgl_set_sign(dbl_value,sign)  
+#define Sglext_clear_signexponent_set_hidden(srcdst) \
+	Sgl_clear_signexponent_set_hidden(srcdst) 
+#define Sglext_clear_signexponent(srcdst) Sgl_clear_signexponent(srcdst) 
+#define Sglext_clear_sign(srcdst) Sgl_clear_sign(srcdst) 
+#define Sglext_isone_hidden(dbl_value) Sgl_isone_hidden(dbl_value) 
+
+#define Sglext_denormalize(opndp1,opndp2,exponent,is_tiny)		\
+  {int sticky;								\
+    is_tiny = TRUE;							\
+    if (exponent == 0 && Sextallp2(opndp2)) {				\
+	switch (Rounding_mode()) {					\
+	case ROUNDPLUS:							\
+		if (Sgl_iszero_sign(opndp1))				\
+			if (Sgl_isone_hiddenoverflow(opndp1 + 1))	\
+				is_tiny = FALSE;			\
+		break;							\
+	case ROUNDMINUS:						\
+		if (Sgl_isone_sign(opndp1)) {				\
+			if (Sgl_isone_hiddenoverflow(opndp1 + 1))	\
+				is_tiny = FALSE;			\
+		}							\
+		break;							\
+	case ROUNDNEAREST:						\
+		if (Sglext_isone_highp2(opndp2) &&			\
+		    (Sglext_isone_lowp1(opndp1) || 			\
+		     Sglext_isnotzero_low31p2(opndp2)))			\
+			if (Sgl_isone_hiddenoverflow(opndp1 + 1))	\
+				is_tiny = FALSE;			\
+		break;							\
+	}								\
+    }									\
+    Sglext_clear_signexponent_set_hidden(opndp1);			\
+    if (exponent >= (1-DBL_P)) {					\
+	if (exponent >= -31) {						\
+	    if (exponent > -31) {					\
+		sticky = Sextallp2(opndp2) << 31+exponent;		\
+		Variable_shift_double(opndp1,opndp2,1-exponent,opndp2);	\
+		Sextallp1(opndp1) >>= 1-exponent;			\
+	    }								\
+	    else {							\
+		sticky = Sextallp2(opndp2);				\
+		Sextallp2(opndp2) = Sextallp1(opndp1);			\
+		Sextallp1(opndp1) = 0;					\
+	    }								\
+	}								\
+	else {								\
+	    sticky = (Sextallp1(opndp1) << 31+exponent) | 		\
+		     Sextallp2(opndp2);					\
+	    Sextallp2(opndp2) = Sextallp1(opndp1) >> -31-exponent;	\
+	    Sextallp1(opndp1) = 0;					\
+	}								\
+    }									\
+    else {								\
+	sticky = Sextallp1(opndp1) | Sextallp2(opndp2);			\
+	Sglext_setzero(opndp1,opndp2);					\
+    }									\
+    if (sticky) Sglext_setone_lowmantissap2(opndp2);			\
+    exponent = 0;							\
+  }