Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

2 files changed, 892 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
new file mode 100644
index 000000000..d41dad227
--- /dev/null
+++ b/arch/powerpc/platforms/Kconfig
@@ -0,0 +1,302 @@
+# SPDX-License-Identifier: GPL-2.0
+menu "Platform support"
+
+source "arch/powerpc/platforms/powernv/Kconfig"
+source "arch/powerpc/platforms/pseries/Kconfig"
+source "arch/powerpc/platforms/chrp/Kconfig"
+source "arch/powerpc/platforms/512x/Kconfig"
+source "arch/powerpc/platforms/52xx/Kconfig"
+source "arch/powerpc/platforms/powermac/Kconfig"
+source "arch/powerpc/platforms/maple/Kconfig"
+source "arch/powerpc/platforms/pasemi/Kconfig"
+source "arch/powerpc/platforms/ps3/Kconfig"
+source "arch/powerpc/platforms/cell/Kconfig"
+source "arch/powerpc/platforms/8xx/Kconfig"
+source "arch/powerpc/platforms/82xx/Kconfig"
+source "arch/powerpc/platforms/83xx/Kconfig"
+source "arch/powerpc/platforms/85xx/Kconfig"
+source "arch/powerpc/platforms/86xx/Kconfig"
+source "arch/powerpc/platforms/embedded6xx/Kconfig"
+source "arch/powerpc/platforms/44x/Kconfig"
+source "arch/powerpc/platforms/40x/Kconfig"
+source "arch/powerpc/platforms/amigaone/Kconfig"
+source "arch/powerpc/platforms/book3s/Kconfig"
+source "arch/powerpc/platforms/microwatt/Kconfig"
+
+config KVM_GUEST
+	bool "KVM Guest support"
+	select EPAPR_PARAVIRT
+	help
+	  This option enables various optimizations for running under the KVM
+	  hypervisor. Overhead for the kernel when not running inside KVM should
+	  be minimal.
+
+	  In case of doubt, say Y
+
+config EPAPR_PARAVIRT
+	bool "ePAPR para-virtualization support"
+	help
+	  Enables ePAPR para-virtualization support for guests.
+
+	  In case of doubt, say Y
+
+config PPC_HASH_MMU_NATIVE
+	bool
+	depends on PPC_BOOK3S
+	help
+	  Support for running natively on the hardware, i.e. without
+	  a hypervisor. This option is not user-selectable but should
+	  be selected by all platforms that need it.
+
+config PPC_OF_BOOT_TRAMPOLINE
+	bool "Support booting from Open Firmware or yaboot"
+	depends on PPC_BOOK3S_32 || PPC64
+	select RELOCATABLE if PPC64
+	default y
+	help
+	  Support from booting from Open Firmware or yaboot using an
+	  Open Firmware client interface. This enables the kernel to
+	  communicate with open firmware to retrieve system information
+	  such as the device tree.
+
+	  In case of doubt, say Y
+
+config PPC_DT_CPU_FTRS
+	bool "Device-tree based CPU feature discovery & setup"
+	depends on PPC_BOOK3S_64
+	default y
+	help
+	  This enables code to use a new device tree binding for describing CPU
+	  compatibility and features. Saying Y here will attempt to use the new
+	  binding if the firmware provides it. Currently only the skiboot
+	  firmware provides this binding.
+	  If you're not sure say Y.
+
+config UDBG_RTAS_CONSOLE
+	bool "RTAS based debug console"
+	depends on PPC_RTAS
+
+config PPC_SMP_MUXED_IPI
+	bool
+	help
+	  Select this option if your platform supports SMP and your
+	  interrupt controller provides less than 4 interrupts to each
+	  cpu.	This will enable the generic code to multiplex the 4
+	  messages on to one ipi.
+
+config IPIC
+	bool
+
+config MPIC
+	bool
+
+config MPIC_TIMER
+	bool "MPIC Global Timer"
+	depends on MPIC && FSL_SOC
+	help
+	  The MPIC global timer is a hardware timer inside the
+	  Freescale PIC complying with OpenPIC standard. When the
+	  specified interval times out, the hardware timer generates
+	  an interrupt. The driver currently is only tested on fsl
+	  chip, but it can potentially support other global timers
+	  complying with the OpenPIC standard.
+
+config FSL_MPIC_TIMER_WAKEUP
+	tristate "Freescale MPIC global timer wakeup driver"
+	depends on FSL_SOC &&  MPIC_TIMER && PM
+	help
+	  The driver provides a way to wake up the system by MPIC
+	  timer.
+	  e.g. "echo 5 > /sys/devices/system/mpic/timer_wakeup"
+
+config PPC_EPAPR_HV_PIC
+	bool
+	select EPAPR_PARAVIRT
+
+config MPIC_WEIRD
+	bool
+
+config MPIC_MSGR
+	bool "MPIC message register support"
+	depends on MPIC
+	help
+	  Enables support for the MPIC message registers.  These
+	  registers are used for inter-processor communication.
+
+config PPC_I8259
+	bool
+
+config U3_DART
+	bool
+	depends on PPC64
+
+config PPC_RTAS
+	bool
+
+config RTAS_ERROR_LOGGING
+	bool
+	depends on PPC_RTAS
+
+config PPC_RTAS_DAEMON
+	bool
+	depends on PPC_RTAS
+
+config RTAS_PROC
+	bool "Proc interface to RTAS"
+	depends on PPC_RTAS && PROC_FS
+	default y
+
+config RTAS_FLASH
+	tristate "Firmware flash interface"
+	depends on PPC64 && RTAS_PROC
+
+config MMIO_NVRAM
+	bool
+
+config MPIC_U3_HT_IRQS
+	bool
+
+config MPIC_BROKEN_REGREAD
+	bool
+	depends on MPIC
+	help
+	  This option enables a MPIC driver workaround for some chips
+	  that have a bug that causes some interrupt source information
+	  to not read back properly. It is safe to use on other chips as
+	  well, but enabling it uses about 8KB of memory to keep copies
+	  of the register contents in software.
+
+config EEH
+	bool
+	depends on (PPC_POWERNV || PPC_PSERIES) && PCI
+	default y
+
+config PPC_MPC106
+	bool
+
+config PPC_970_NAP
+	bool
+
+config PPC_P7_NAP
+	bool
+
+config PPC_BOOK3S_IDLE
+	def_bool y
+	depends on (PPC_970_NAP || PPC_P7_NAP)
+
+config PPC_INDIRECT_PIO
+	bool
+	select GENERIC_IOMAP
+
+config PPC_INDIRECT_MMIO
+	bool
+
+config PPC_IO_WORKAROUNDS
+	bool
+
+source "drivers/cpufreq/Kconfig"
+
+menu "CPUIdle driver"
+
+source "drivers/cpuidle/Kconfig"
+
+endmenu
+
+config TAU
+	bool "On-chip CPU temperature sensor support"
+	depends on PPC_BOOK3S_32
+	help
+	  G3 and G4 processors have an on-chip temperature sensor called the
+	  'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
+	  temperature within 2-4 degrees Celsius. This option shows the current
+	  on-die temperature in /proc/cpuinfo if the cpu supports it.
+
+	  Unfortunately, this sensor is very inaccurate when uncalibrated, so
+	  don't assume the cpu temp is actually what /proc/cpuinfo says it is.
+
+config TAU_INT
+	bool "Interrupt driven TAU driver (EXPERIMENTAL)"
+	depends on TAU
+	help
+	  The TAU supports an interrupt driven mode which causes an interrupt
+	  whenever the temperature goes out of range. This is the fastest way
+	  to get notified the temp has exceeded a range. With this option off,
+	  a timer is used to re-check the temperature periodically.
+
+	  If in doubt, say N here.
+
+config TAU_AVERAGE
+	bool "Average high and low temp"
+	depends on TAU
+	help
+	  The TAU hardware can compare the temperature to an upper and lower
+	  bound.  The default behavior is to show both the upper and lower
+	  bound in /proc/cpuinfo. If the range is large, the temperature is
+	  either changing a lot, or the TAU hardware is broken (likely on some
+	  G4's). If the range is small (around 4 degrees), the temperature is
+	  relatively stable.  If you say Y here, a single temperature value,
+	  halfway between the upper and lower bounds, will be reported in
+	  /proc/cpuinfo.
+
+	  If in doubt, say N here.
+
+config QE_GPIO
+	bool "QE GPIO support"
+	depends on QUICC_ENGINE
+	select GPIOLIB
+	help
+	  Say Y here if you're going to use hardware that connects to the
+	  QE GPIOs.
+
+config CPM2
+	bool "Enable support for the CPM2 (Communications Processor Module)"
+	depends on (FSL_SOC_BOOKE && PPC32) || 8260
+	select CPM
+	select HAVE_PCI
+	select GPIOLIB
+	help
+	  The CPM2 (Communications Processor Module) is a coprocessor on
+	  embedded CPUs made by Freescale.  Selecting this option means that
+	  you wish to build a kernel for a machine with a CPM2 coprocessor
+	  on it (826x, 827x, 8560).
+
+config FSL_ULI1575
+	bool
+	select GENERIC_ISA_DMA
+	help
+	  Supports for the ULI1575 PCIe south bridge that exists on some
+	  Freescale reference boards. The boards all use the ULI in pretty
+	  much the same way.
+
+config CPM
+	bool
+	select GENERIC_ALLOCATOR
+
+config OF_RTC
+	bool
+	help
+	  Uses information from the OF or flattened device tree to instantiate
+	  platform devices for direct mapped RTC chips like the DS1742 or DS1743.
+
+config GEN_RTC
+	bool "Use the platform RTC operations from user space"
+	select RTC_CLASS
+	select RTC_DRV_GENERIC
+	help
+	  This option provides backwards compatibility with the old gen_rtc.ko
+	  module that was traditionally used for old PowerPC machines.
+	  Platforms should migrate to enabling the RTC_DRV_GENERIC by hand
+	  replacing their get_rtc_time/set_rtc_time callbacks with
+	  a proper RTC device driver.
+
+config MCU_MPC8349EMITX
+	bool "MPC8349E-mITX MCU driver"
+	depends on I2C=y && PPC_83xx
+	select GPIOLIB
+	help
+	  Say Y here to enable soft power-off functionality on the Freescale
+	  boards with the MPC8349E-mITX-compatible MCU chips. This driver will
+	  also register MCU GPIOs with the generic GPIO API, so you'll able
+	  to use MCU pins as GPIOs.
+
+endmenu
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
new file mode 100644
index 000000000..9563336e3
--- /dev/null
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -0,0 +1,590 @@
+# SPDX-License-Identifier: GPL-2.0
+config PPC32
+	bool
+	default y if !PPC64
+
+config PPC64
+	bool "64-bit kernel"
+	select ZLIB_DEFLATE
+	help
+	  This option selects whether a 32-bit or a 64-bit kernel
+	  will be built.
+
+menu "Processor support"
+choice
+	prompt "Processor Type"
+	depends on PPC32
+	help
+	  There are five families of 32 bit PowerPC chips supported.
+	  The most common ones are the desktop and server CPUs (603,
+	  604, 740, 750, 74xx) CPUs from Freescale and IBM, with their
+	  embedded 512x/52xx/82xx/83xx/86xx counterparts.
+	  The other embedded parts, namely 4xx, 8xx and e500
+	  (85xx) each form a family of their own that is not compatible
+	  with the others.
+
+	  If unsure, select 52xx/6xx/7xx/74xx/82xx/83xx/86xx.
+
+config PPC_BOOK3S_32
+	bool "512x/52xx/6xx/7xx/74xx/82xx/83xx/86xx"
+	imply PPC_FPU
+	select PPC_HAVE_PMU_SUPPORT
+	select HAVE_ARCH_VMAP_STACK
+
+config PPC_85xx
+	bool "Freescale 85xx"
+	select PPC_E500
+
+config PPC_8xx
+	bool "Freescale 8xx"
+	select ARCH_SUPPORTS_HUGETLBFS
+	select FSL_SOC
+	select PPC_KUEP
+	select HAVE_ARCH_VMAP_STACK
+	select HUGETLBFS
+
+config 40x
+	bool "AMCC 40x"
+	select PPC_DCR_NATIVE
+	select PPC_UDBG_16550
+	select 4xx_SOC
+	select HAVE_PCI
+	select PPC_KUEP if PPC_KUAP
+
+config 44x
+	bool "AMCC 44x, 46x or 47x"
+	select PPC_DCR_NATIVE
+	select PPC_UDBG_16550
+	select 4xx_SOC
+	select HAVE_PCI
+	select PHYS_64BIT
+	select PPC_KUEP
+
+endchoice
+
+config PPC_BOOK3S_603
+	bool "Support for 603 SW loaded TLB"
+	depends on PPC_BOOK3S_32
+	default y
+	help
+	  Provide support for processors based on the 603 cores. Those
+	  processors don't have a HASH MMU and provide SW TLB loading.
+
+config PPC_BOOK3S_604
+	bool "Support for 604+ HASH MMU" if PPC_BOOK3S_603
+	depends on PPC_BOOK3S_32
+	default y
+	help
+	  Provide support for processors not based on the 603 cores.
+	  Those processors have a HASH MMU.
+
+choice
+	prompt "Processor Type"
+	depends on PPC64
+	help
+	  There are two families of 64 bit PowerPC chips supported.
+	  The most common ones are the desktop and server CPUs
+	  (POWER5, 970, POWER5+, POWER6, POWER7, POWER8, POWER9 ...)
+
+	  The other are the "embedded" processors compliant with the
+	  "Book 3E" variant of the architecture
+
+config PPC_BOOK3S_64
+	bool "Server processors"
+	select PPC_FPU
+	select PPC_HAVE_PMU_SUPPORT
+	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
+	select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
+	select ARCH_ENABLE_SPLIT_PMD_PTLOCK
+	select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
+	select ARCH_SUPPORTS_HUGETLBFS
+	select ARCH_SUPPORTS_NUMA_BALANCING
+	select HAVE_MOVE_PMD
+	select HAVE_MOVE_PUD
+	select IRQ_WORK
+	select PPC_64S_HASH_MMU if !PPC_RADIX_MMU
+	select KASAN_VMALLOC if KASAN
+
+config PPC_BOOK3E_64
+	bool "Embedded processors"
+	select PPC_E500
+	select PPC_E500MC
+	select PPC_FPU # Make it a choice ?
+	select PPC_SMP_MUXED_IPI
+	select PPC_DOORBELL
+	select ZONE_DMA
+
+endchoice
+
+choice
+	prompt "CPU selection"
+	default GENERIC_CPU
+	help
+	  This will create a kernel which is optimised for a particular CPU.
+	  The resulting kernel may not run on other CPUs, so use this with care.
+
+	  If unsure, select Generic.
+
+config GENERIC_CPU
+	bool "Generic (POWER5 and PowerPC 970 and above)"
+	depends on PPC_BOOK3S_64 && !CPU_LITTLE_ENDIAN
+	select PPC_64S_HASH_MMU
+
+config GENERIC_CPU
+	bool "Generic (POWER8 and above)"
+	depends on PPC_BOOK3S_64 && CPU_LITTLE_ENDIAN
+	select ARCH_HAS_FAST_MULTIPLIER
+	select PPC_64S_HASH_MMU
+	select PPC_HAS_LBARX_LHARX
+
+config POWERPC_CPU
+	bool "Generic 32 bits powerpc"
+	depends on PPC_BOOK3S_32
+
+config CELL_CPU
+	bool "Cell Broadband Engine"
+	depends on PPC_BOOK3S_64 && !CPU_LITTLE_ENDIAN
+	select PPC_64S_HASH_MMU
+
+config PPC_970_CPU
+	bool "PowerPC 970 (including PowerPC G5)"
+	depends on PPC_BOOK3S_64 && !CPU_LITTLE_ENDIAN
+	select PPC_64S_HASH_MMU
+
+config POWER6_CPU
+	bool "POWER6"
+	depends on PPC_BOOK3S_64 && !CPU_LITTLE_ENDIAN
+	select PPC_64S_HASH_MMU
+
+config POWER7_CPU
+	bool "POWER7"
+	depends on PPC_BOOK3S_64
+	select ARCH_HAS_FAST_MULTIPLIER
+	select PPC_64S_HASH_MMU
+	select PPC_HAS_LBARX_LHARX
+
+config POWER8_CPU
+	bool "POWER8"
+	depends on PPC_BOOK3S_64
+	select ARCH_HAS_FAST_MULTIPLIER
+	select PPC_64S_HASH_MMU
+	select PPC_HAS_LBARX_LHARX
+
+config POWER9_CPU
+	bool "POWER9"
+	depends on PPC_BOOK3S_64
+	select ARCH_HAS_FAST_MULTIPLIER
+	select PPC_HAS_LBARX_LHARX
+
+config POWER10_CPU
+	bool "POWER10"
+	depends on PPC_BOOK3S_64
+	select ARCH_HAS_FAST_MULTIPLIER
+
+config E5500_CPU
+	bool "Freescale e5500"
+	depends on PPC64 && PPC_E500
+
+config E6500_CPU
+	bool "Freescale e6500"
+	depends on PPC64 && PPC_E500
+	select PPC_HAS_LBARX_LHARX
+
+config 405_CPU
+	bool "40x family"
+	depends on 40x
+
+config 440_CPU
+	bool "440 (44x family)"
+	depends on 44x
+
+config 464_CPU
+	bool "464 (44x family)"
+	depends on 44x
+
+config 476_CPU
+	bool "476 (47x family)"
+	depends on PPC_47x
+
+config 860_CPU
+	bool "8xx family"
+	depends on PPC_8xx
+
+config E300C2_CPU
+	bool "e300c2 (832x)"
+	depends on PPC_BOOK3S_32
+
+config E300C3_CPU
+	bool "e300c3 (831x)"
+	depends on PPC_BOOK3S_32
+
+config G4_CPU
+	bool "G4 (74xx)"
+	depends on PPC_BOOK3S_32
+	select ALTIVEC
+
+config E500_CPU
+	bool "e500 (8540)"
+	depends on PPC_85xx && !PPC_E500MC
+
+config E500MC_CPU
+	bool "e500mc"
+	depends on PPC_85xx && PPC_E500MC
+
+config TOOLCHAIN_DEFAULT_CPU
+	bool "Rely on the toolchain's implicit default CPU"
+	depends on PPC32
+
+endchoice
+
+config TARGET_CPU_BOOL
+	bool
+	default !GENERIC_CPU && !TOOLCHAIN_DEFAULT_CPU
+
+config TARGET_CPU
+	string
+	depends on TARGET_CPU_BOOL
+	default "cell" if CELL_CPU
+	default "970" if PPC_970_CPU
+	default "power6" if POWER6_CPU
+	default "power7" if POWER7_CPU
+	default "power8" if POWER8_CPU
+	default "power9" if POWER9_CPU
+	default "power10" if POWER10_CPU
+	default "405" if 405_CPU
+	default "440" if 440_CPU
+	default "464" if 464_CPU
+	default "476" if 476_CPU
+	default "860" if 860_CPU
+	default "e300c2" if E300C2_CPU
+	default "e300c3" if E300C3_CPU
+	default "G4" if G4_CPU
+	default "8540" if E500_CPU
+	default "e500mc" if E500MC_CPU
+	default "powerpc" if POWERPC_CPU
+
+config PPC_BOOK3S
+	def_bool y
+	depends on PPC_BOOK3S_32 || PPC_BOOK3S_64
+
+config PPC_E500
+	select FSL_EMB_PERFMON
+	bool
+	select ARCH_SUPPORTS_HUGETLBFS if PHYS_64BIT || PPC64
+	select PPC_SMP_MUXED_IPI
+	select PPC_DOORBELL
+	select PPC_KUEP
+
+config PPC_E500MC
+	bool "e500mc Support"
+	select PPC_FPU
+	select COMMON_CLK
+	depends on PPC_E500
+	help
+	  This must be enabled for running on e500mc (and derivatives
+	  such as e5500/e6500), and must be disabled for running on
+	  e500v1 or e500v2.
+
+config PPC_FPU_REGS
+	bool
+
+config PPC_FPU
+	bool "Support for Floating Point Unit (FPU)" if PPC_MPC832x
+	default y if PPC64
+	select PPC_FPU_REGS
+	help
+	  This must be enabled to support the Floating Point Unit
+	  Most 6xx have an FPU but e300c2 core (mpc832x) don't have
+	  an FPU, so when building an embedded kernel for that target
+	  you can disable FPU support.
+
+	  If unsure say Y.
+
+config FSL_EMB_PERFMON
+	bool "Freescale Embedded Perfmon"
+	depends on PPC_E500 || PPC_83xx
+	help
+	  This is the Performance Monitor support found on the e500 core
+	  and some e300 cores (c3 and c4).  Select this only if your
+	  core supports the Embedded Performance Monitor APU
+
+config FSL_EMB_PERF_EVENT
+	bool
+	depends on FSL_EMB_PERFMON && PERF_EVENTS && !PPC_PERF_CTRS
+	default y
+
+config FSL_EMB_PERF_EVENT_E500
+	bool
+	depends on FSL_EMB_PERF_EVENT && PPC_E500
+	default y
+
+config 4xx
+	bool
+	depends on 40x || 44x
+	default y
+
+config BOOKE
+	bool
+	depends on PPC_E500 || 44x
+	default y
+
+config BOOKE_OR_40x
+	bool
+	depends on BOOKE || 40x
+	default y
+
+config PTE_64BIT
+	bool
+	depends on 44x || PPC_E500 || PPC_86xx
+	default y if PHYS_64BIT
+
+config PHYS_64BIT
+	bool 'Large physical address support' if PPC_E500 || PPC_86xx
+	depends on (44x || PPC_E500 || PPC_86xx) && !PPC_83xx && !PPC_82xx
+	select PHYS_ADDR_T_64BIT
+	help
+	  This option enables kernel support for larger than 32-bit physical
+	  addresses.  This feature may not be available on all cores.
+
+	  If you have more than 3.5GB of RAM or so, you also need to enable
+	  SWIOTLB under Kernel Options for this to work.  The actual number
+	  is platform-dependent.
+
+	  If in doubt, say N here.
+
+config ALTIVEC
+	bool "AltiVec Support"
+	depends on PPC_BOOK3S || (PPC_E500MC && PPC64 && !E5500_CPU)
+	select PPC_FPU
+	help
+	  This option enables kernel support for the Altivec extensions to the
+	  PowerPC processor. The kernel currently supports saving and restoring
+	  altivec registers, and turning on the 'altivec enable' bit so user
+	  processes can execute altivec instructions.
+
+	  This option is only usefully if you have a processor that supports
+	  altivec (G4, otherwise known as 74xx series), but does not have
+	  any affect on a non-altivec cpu (it does, however add code to the
+	  kernel).
+
+	  If in doubt, say Y here.
+
+config VSX
+	bool "VSX Support"
+	depends on PPC_BOOK3S_64 && ALTIVEC && PPC_FPU
+	help
+
+	  This option enables kernel support for the Vector Scaler extensions
+	  to the PowerPC processor. The kernel currently supports saving and
+	  restoring VSX registers, and turning on the 'VSX enable' bit so user
+	  processes can execute VSX instructions.
+
+	  This option is only useful if you have a processor that supports
+	  VSX (P7 and above), but does not have any affect on a non-VSX
+	  CPUs (it does, however add code to the kernel).
+
+	  If in doubt, say Y here.
+
+config SPE_POSSIBLE
+	def_bool y
+	depends on PPC_E500 && !PPC_E500MC
+
+config SPE
+	bool "SPE Support"
+	depends on SPE_POSSIBLE
+	default y
+	help
+	  This option enables kernel support for the Signal Processing
+	  Extensions (SPE) to the PowerPC processor. The kernel currently
+	  supports saving and restoring SPE registers, and turning on the
+	  'spe enable' bit so user processes can execute SPE instructions.
+
+	  This option is only useful if you have a processor that supports
+	  SPE (e500, otherwise known as 85xx series), but does not have any
+	  effect on a non-spe cpu (it does, however add code to the kernel).
+
+	  If in doubt, say Y here.
+
+config PPC_64S_HASH_MMU
+	bool "Hash MMU Support"
+	depends on PPC_BOOK3S_64
+	default y
+	help
+	  Enable support for the Power ISA Hash style MMU. This is implemented
+	  by all IBM Power and other 64-bit Book3S CPUs before ISA v3.0. The
+	  OpenPOWER ISA does not mandate the hash MMU and some CPUs do not
+	  implement it (e.g., Microwatt).
+
+	  Note that POWER9 PowerVM platforms only support the hash
+	  MMU. From POWER10 radix is also supported by PowerVM.
+
+	  If you're unsure, say Y.
+
+config PPC_RADIX_MMU
+	bool "Radix MMU Support"
+	depends on PPC_BOOK3S_64
+	select ARCH_HAS_GIGANTIC_PAGE
+	default y
+	help
+	  Enable support for the Power ISA 3.0 Radix style MMU. Currently this
+	  is only implemented by IBM Power9 CPUs, if you don't have one of them
+	  you can probably disable this.
+
+config PPC_RADIX_MMU_DEFAULT
+	bool "Default to using the Radix MMU when possible" if PPC_64S_HASH_MMU
+	depends on PPC_BOOK3S_64
+	depends on PPC_RADIX_MMU
+	default y
+	help
+	  When the hardware supports the Radix MMU, default to using it unless
+	  "disable_radix[=yes]" is specified on the kernel command line.
+
+	  If this option is disabled, the Hash MMU will be used by default,
+	  unless "disable_radix=no" is specified on the kernel command line.
+
+	  If you're unsure, say Y.
+
+config PPC_KUEP
+	bool "Kernel Userspace Execution Prevention" if !40x
+	default y if !40x
+	help
+	  Enable support for Kernel Userspace Execution Prevention (KUEP)
+
+	  If you're unsure, say Y.
+
+config PPC_KUAP
+	bool "Kernel Userspace Access Protection"
+	default y
+	help
+	  Enable support for Kernel Userspace Access Protection (KUAP)
+
+	  If you're unsure, say Y.
+
+config PPC_KUAP_DEBUG
+	bool "Extra debugging for Kernel Userspace Access Protection"
+	depends on PPC_KUAP
+	help
+	  Add extra debugging for Kernel Userspace Access Protection (KUAP)
+	  If you're unsure, say N.
+
+config PPC_PKEY
+	def_bool y
+	depends on PPC_BOOK3S_64
+	depends on PPC_MEM_KEYS || PPC_KUAP || PPC_KUEP
+
+
+config PPC_MMU_NOHASH
+	def_bool y
+	depends on !PPC_BOOK3S
+
+config PPC_HAVE_PMU_SUPPORT
+	bool
+
+config PMU_SYSFS
+	bool "Create PMU SPRs sysfs file"
+	default n
+	help
+	  This option enables sysfs file creation for PMU SPRs like MMCR* and PMC*.
+
+config PPC_PERF_CTRS
+	def_bool y
+	depends on PERF_EVENTS && PPC_HAVE_PMU_SUPPORT
+	help
+	 This enables the powerpc-specific perf_event back-end.
+
+config FORCE_SMP
+	# Allow platforms to force SMP=y by selecting this
+	bool
+	select SMP
+
+config SMP
+	depends on PPC_BOOK3S || PPC_E500 || PPC_47x
+	select GENERIC_IRQ_MIGRATION
+	bool "Symmetric multi-processing support" if !FORCE_SMP
+	help
+	  This enables support for systems with more than one CPU. If you have
+	  a system with only one CPU, say N. If you have a system with more
+	  than one CPU, say Y.  Note that the kernel does not currently
+	  support SMP machines with 603/603e/603ev or PPC750 ("G3") processors
+	  since they have inadequate hardware support for multiprocessor
+	  operation.
+
+	  If you say N here, the kernel will run on single and multiprocessor
+	  machines, but will use only one CPU of a multiprocessor machine. If
+	  you say Y here, the kernel will run on single-processor machines.
+	  On a single-processor machine, the kernel will run faster if you say
+	  N here.
+
+	  If you don't know what to do here, say N.
+
+config NR_CPUS
+	int "Maximum number of CPUs (2-8192)" if SMP
+	range 2 8192 if SMP
+	default "1" if !SMP
+	default "32" if PPC64
+	default "4"
+
+config NOT_COHERENT_CACHE
+	bool
+	depends on 4xx || PPC_8xx || PPC_MPC512x || \
+		GAMECUBE_COMMON || AMIGAONE
+	select ARCH_HAS_DMA_PREP_COHERENT
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
+	select DMA_DIRECT_REMAP
+	default n if PPC_47x
+	default y
+
+config CHECK_CACHE_COHERENCY
+	bool
+
+config PPC_DOORBELL
+	bool
+
+endmenu
+
+config VDSO32
+	def_bool y
+	depends on PPC32 || COMPAT
+	help
+	  This symbol controls whether we build the 32-bit VDSO. We obviously
+	  want to do that if we're building a 32-bit kernel. If we're building
+	  a 64-bit kernel then we only want a 32-bit VDSO if we're also enabling
+	  COMPAT.
+
+choice
+	prompt "Endianness selection"
+	default CPU_BIG_ENDIAN
+	help
+	  This option selects whether a big endian or little endian kernel will
+	  be built.
+
+config CPU_BIG_ENDIAN
+	bool "Build big endian kernel"
+	help
+	  Build a big endian kernel.
+
+	  If unsure, select this option.
+
+config CPU_LITTLE_ENDIAN
+	bool "Build little endian kernel"
+	depends on PPC_BOOK3S_64
+	select PPC64_BOOT_WRAPPER
+	help
+	  Build a little endian kernel.
+
+	  Note that if cross compiling a little endian kernel,
+	  CROSS_COMPILE must point to a toolchain capable of targeting
+	  little endian powerpc.
+
+endchoice
+
+config PPC64_ELF_ABI_V1
+	def_bool PPC64 && (CPU_BIG_ENDIAN && !PPC64_BIG_ENDIAN_ELF_ABI_V2)
+
+config PPC64_ELF_ABI_V2
+	def_bool PPC64 && !PPC64_ELF_ABI_V1
+
+config PPC64_BOOT_WRAPPER
+	def_bool n
+	depends on CPU_LITTLE_ENDIAN