Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 450 insertions, 0 deletions

diff --git a/arch/powerpc/xmon/ppc.h b/arch/powerpc/xmon/ppc.h
new file mode 100644
index 000000000..1d98b8dd1
--- /dev/null
+++ b/arch/powerpc/xmon/ppc.h
@@ -0,0 +1,450 @@
+/* ppc.h -- Header file for PowerPC opcode table
+   Copyright (C) 1994-2016 Free Software Foundation, Inc.
+   Written by Ian Lance Taylor, Cygnus Support
+
+This file is part of GDB, GAS, and the GNU binutils.
+
+GDB, GAS, and the GNU binutils are free software; you can redistribute
+them and/or modify them under the terms of the GNU General Public
+License as published by the Free Software Foundation; either version
+1, or (at your option) any later version.
+
+GDB, GAS, and the GNU binutils are distributed in the hope that they
+will be useful, but WITHOUT ANY WARRANTY; without even the implied
+warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this file; see the file COPYING.  If not, write to the Free
+Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.  */
+
+#ifndef PPC_H
+#define PPC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef uint64_t ppc_cpu_t;
+
+/* The opcode table is an array of struct powerpc_opcode.  */
+
+struct powerpc_opcode
+{
+  /* The opcode name.  */
+  const char *name;
+
+  /* The opcode itself.  Those bits which will be filled in with
+     operands are zeroes.  */
+  unsigned long opcode;
+
+  /* The opcode mask.  This is used by the disassembler.  This is a
+     mask containing ones indicating those bits which must match the
+     opcode field, and zeroes indicating those bits which need not
+     match (and are presumably filled in by operands).  */
+  unsigned long mask;
+
+  /* One bit flags for the opcode.  These are used to indicate which
+     specific processors support the instructions.  The defined values
+     are listed below.  */
+  ppc_cpu_t flags;
+
+  /* One bit flags for the opcode.  These are used to indicate which
+     specific processors no longer support the instructions.  The defined
+     values are listed below.  */
+  ppc_cpu_t deprecated;
+
+  /* An array of operand codes.  Each code is an index into the
+     operand table.  They appear in the order which the operands must
+     appear in assembly code, and are terminated by a zero.  */
+  unsigned char operands[8];
+};
+
+/* The table itself is sorted by major opcode number, and is otherwise
+   in the order in which the disassembler should consider
+   instructions.  */
+extern const struct powerpc_opcode powerpc_opcodes[];
+extern const int powerpc_num_opcodes;
+extern const struct powerpc_opcode vle_opcodes[];
+extern const int vle_num_opcodes;
+
+/* Values defined for the flags field of a struct powerpc_opcode.  */
+
+/* Opcode is defined for the PowerPC architecture.  */
+#define PPC_OPCODE_PPC			 1
+
+/* Opcode is defined for the POWER (RS/6000) architecture.  */
+#define PPC_OPCODE_POWER		 2
+
+/* Opcode is defined for the POWER2 (Rios 2) architecture.  */
+#define PPC_OPCODE_POWER2		 4
+
+/* Opcode is supported by the Motorola PowerPC 601 processor.  The 601
+   is assumed to support all PowerPC (PPC_OPCODE_PPC) instructions,
+   but it also supports many additional POWER instructions.  */
+#define PPC_OPCODE_601			 8
+
+/* Opcode is supported in both the Power and PowerPC architectures
+   (ie, compiler's -mcpu=common or assembler's -mcom).  More than just
+   the intersection of PPC_OPCODE_PPC with the union of PPC_OPCODE_POWER
+   and PPC_OPCODE_POWER2 because many instructions changed mnemonics
+   between POWER and POWERPC.  */
+#define PPC_OPCODE_COMMON	      0x10
+
+/* Opcode is supported for any Power or PowerPC platform (this is
+   for the assembler's -many option, and it eliminates duplicates).  */
+#define PPC_OPCODE_ANY		      0x20
+
+/* Opcode is only defined on 64 bit architectures.  */
+#define PPC_OPCODE_64		      0x40
+
+/* Opcode is supported as part of the 64-bit bridge.  */
+#define PPC_OPCODE_64_BRIDGE	      0x80
+
+/* Opcode is supported by Altivec Vector Unit */
+#define PPC_OPCODE_ALTIVEC	     0x100
+
+/* Opcode is supported by PowerPC 403 processor.  */
+#define PPC_OPCODE_403		     0x200
+
+/* Opcode is supported by PowerPC BookE processor.  */
+#define PPC_OPCODE_BOOKE	     0x400
+
+/* Opcode is supported by PowerPC 440 processor.  */
+#define PPC_OPCODE_440		     0x800
+
+/* Opcode is only supported by Power4 architecture.  */
+#define PPC_OPCODE_POWER4	    0x1000
+
+/* Opcode is only supported by Power7 architecture.  */
+#define PPC_OPCODE_POWER7	    0x2000
+
+/* Opcode is only supported by e500x2 Core.  */
+#define PPC_OPCODE_SPE		    0x4000
+
+/* Opcode is supported by e500x2 Integer select APU.  */
+#define PPC_OPCODE_ISEL		    0x8000
+
+/* Opcode is an e500 SPE floating point instruction.  */
+#define PPC_OPCODE_EFS		   0x10000
+
+/* Opcode is supported by branch locking APU.  */
+#define PPC_OPCODE_BRLOCK	   0x20000
+
+/* Opcode is supported by performance monitor APU.  */
+#define PPC_OPCODE_PMR		   0x40000
+
+/* Opcode is supported by cache locking APU.  */
+#define PPC_OPCODE_CACHELCK	   0x80000
+
+/* Opcode is supported by machine check APU.  */
+#define PPC_OPCODE_RFMCI	  0x100000
+
+/* Opcode is only supported by Power5 architecture.  */
+#define PPC_OPCODE_POWER5	  0x200000
+
+/* Opcode is supported by PowerPC e300 family.  */
+#define PPC_OPCODE_E300           0x400000
+
+/* Opcode is only supported by Power6 architecture.  */
+#define PPC_OPCODE_POWER6	  0x800000
+
+/* Opcode is only supported by PowerPC Cell family.  */
+#define PPC_OPCODE_CELL		 0x1000000
+
+/* Opcode is supported by CPUs with paired singles support.  */
+#define PPC_OPCODE_PPCPS	 0x2000000
+
+/* Opcode is supported by Power E500MC */
+#define PPC_OPCODE_E500MC        0x4000000
+
+/* Opcode is supported by PowerPC 405 processor.  */
+#define PPC_OPCODE_405		 0x8000000
+
+/* Opcode is supported by Vector-Scalar (VSX) Unit */
+#define PPC_OPCODE_VSX		0x10000000
+
+/* Opcode is supported by A2.  */
+#define PPC_OPCODE_A2	 	0x20000000
+
+/* Opcode is supported by PowerPC 476 processor.  */
+#define PPC_OPCODE_476		0x40000000
+
+/* Opcode is supported by AppliedMicro Titan core */
+#define PPC_OPCODE_TITAN        0x80000000
+
+/* Opcode which is supported by the e500 family */
+#define PPC_OPCODE_E500	       0x100000000ull
+
+/* Opcode is supported by Extended Altivec Vector Unit */
+#define PPC_OPCODE_ALTIVEC2    0x200000000ull
+
+/* Opcode is supported by Power E6500 */
+#define PPC_OPCODE_E6500       0x400000000ull
+
+/* Opcode is supported by Thread management APU */
+#define PPC_OPCODE_TMR         0x800000000ull
+
+/* Opcode which is supported by the VLE extension.  */
+#define PPC_OPCODE_VLE	      0x1000000000ull
+
+/* Opcode is only supported by Power8 architecture.  */
+#define PPC_OPCODE_POWER8     0x2000000000ull
+
+/* Opcode which is supported by the Hardware Transactional Memory extension.  */
+/* Currently, this is the same as the POWER8 mask.  If another cpu comes out
+   that isn't a superset of POWER8, we can define this to its own mask.  */
+#define PPC_OPCODE_HTM        PPC_OPCODE_POWER8
+
+/* Opcode is supported by ppc750cl.  */
+#define PPC_OPCODE_750	      0x4000000000ull
+
+/* Opcode is supported by ppc7450.  */
+#define PPC_OPCODE_7450	      0x8000000000ull
+
+/* Opcode is supported by ppc821/850/860.  */
+#define PPC_OPCODE_860	      0x10000000000ull
+
+/* Opcode is only supported by Power9 architecture.  */
+#define PPC_OPCODE_POWER9     0x20000000000ull
+
+/* Opcode is supported by Vector-Scalar (VSX) Unit from ISA 2.08.  */
+#define PPC_OPCODE_VSX3       0x40000000000ull
+
+  /* Opcode is supported by e200z4.  */
+#define PPC_OPCODE_E200Z4     0x80000000000ull
+
+/* A macro to extract the major opcode from an instruction.  */
+#define PPC_OP(i) (((i) >> 26) & 0x3f)
+
+/* A macro to determine if the instruction is a 2-byte VLE insn.  */
+#define PPC_OP_SE_VLE(m) ((m) <= 0xffff)
+
+/* A macro to extract the major opcode from a VLE instruction.  */
+#define VLE_OP(i,m) (((i) >> ((m) <= 0xffff ? 10 : 26)) & 0x3f)
+
+/* A macro to convert a VLE opcode to a VLE opcode segment.  */
+#define VLE_OP_TO_SEG(i) ((i) >> 1)
+
+/* The operands table is an array of struct powerpc_operand.  */
+
+struct powerpc_operand
+{
+  /* A bitmask of bits in the operand.  */
+  unsigned int bitm;
+
+  /* The shift operation to be applied to the operand.  No shift
+     is made if this is zero.  For positive values, the operand
+     is shifted left by SHIFT.  For negative values, the operand
+     is shifted right by -SHIFT.  Use PPC_OPSHIFT_INV to indicate
+     that BITM and SHIFT cannot be used to determine where the
+     operand goes in the insn.  */
+  int shift;
+
+  /* Insertion function.  This is used by the assembler.  To insert an
+     operand value into an instruction, check this field.
+
+     If it is NULL, execute
+	 if (o->shift >= 0)
+	   i |= (op & o->bitm) << o->shift;
+	 else
+	   i |= (op & o->bitm) >> -o->shift;
+     (i is the instruction which we are filling in, o is a pointer to
+     this structure, and op is the operand value).
+
+     If this field is not NULL, then simply call it with the
+     instruction and the operand value.  It will return the new value
+     of the instruction.  If the ERRMSG argument is not NULL, then if
+     the operand value is illegal, *ERRMSG will be set to a warning
+     string (the operand will be inserted in any case).  If the
+     operand value is legal, *ERRMSG will be unchanged (most operands
+     can accept any value).  */
+  unsigned long (*insert)
+    (unsigned long instruction, long op, ppc_cpu_t dialect, const char **errmsg);
+
+  /* Extraction function.  This is used by the disassembler.  To
+     extract this operand type from an instruction, check this field.
+
+     If it is NULL, compute
+	 if (o->shift >= 0)
+	   op = (i >> o->shift) & o->bitm;
+	 else
+	   op = (i << -o->shift) & o->bitm;
+	 if ((o->flags & PPC_OPERAND_SIGNED) != 0)
+	   sign_extend (op);
+     (i is the instruction, o is a pointer to this structure, and op
+     is the result).
+
+     If this field is not NULL, then simply call it with the
+     instruction value.  It will return the value of the operand.  If
+     the INVALID argument is not NULL, *INVALID will be set to
+     non-zero if this operand type can not actually be extracted from
+     this operand (i.e., the instruction does not match).  If the
+     operand is valid, *INVALID will not be changed.  */
+  long (*extract) (unsigned long instruction, ppc_cpu_t dialect, int *invalid);
+
+  /* One bit syntax flags.  */
+  unsigned long flags;
+};
+
+/* Elements in the table are retrieved by indexing with values from
+   the operands field of the powerpc_opcodes table.  */
+
+extern const struct powerpc_operand powerpc_operands[];
+extern const unsigned int num_powerpc_operands;
+
+/* Use with the shift field of a struct powerpc_operand to indicate
+     that BITM and SHIFT cannot be used to determine where the operand
+     goes in the insn.  */
+#define PPC_OPSHIFT_INV (-1U << 31)
+
+/* Values defined for the flags field of a struct powerpc_operand.  */
+
+/* This operand takes signed values.  */
+#define PPC_OPERAND_SIGNED (0x1)
+
+/* This operand takes signed values, but also accepts a full positive
+   range of values when running in 32 bit mode.  That is, if bits is
+   16, it takes any value from -0x8000 to 0xffff.  In 64 bit mode,
+   this flag is ignored.  */
+#define PPC_OPERAND_SIGNOPT (0x2)
+
+/* This operand does not actually exist in the assembler input.  This
+   is used to support extended mnemonics such as mr, for which two
+   operands fields are identical.  The assembler should call the
+   insert function with any op value.  The disassembler should call
+   the extract function, ignore the return value, and check the value
+   placed in the valid argument.  */
+#define PPC_OPERAND_FAKE (0x4)
+
+/* The next operand should be wrapped in parentheses rather than
+   separated from this one by a comma.  This is used for the load and
+   store instructions which want their operands to look like
+       reg,displacement(reg)
+   */
+#define PPC_OPERAND_PARENS (0x8)
+
+/* This operand may use the symbolic names for the CR fields, which
+   are
+       lt  0	gt  1	eq  2	so  3	un  3
+       cr0 0	cr1 1	cr2 2	cr3 3
+       cr4 4	cr5 5	cr6 6	cr7 7
+   These may be combined arithmetically, as in cr2*4+gt.  These are
+   only supported on the PowerPC, not the POWER.  */
+#define PPC_OPERAND_CR_BIT (0x10)
+
+/* This operand names a register.  The disassembler uses this to print
+   register names with a leading 'r'.  */
+#define PPC_OPERAND_GPR (0x20)
+
+/* Like PPC_OPERAND_GPR, but don't print a leading 'r' for r0.  */
+#define PPC_OPERAND_GPR_0 (0x40)
+
+/* This operand names a floating point register.  The disassembler
+   prints these with a leading 'f'.  */
+#define PPC_OPERAND_FPR (0x80)
+
+/* This operand is a relative branch displacement.  The disassembler
+   prints these symbolically if possible.  */
+#define PPC_OPERAND_RELATIVE (0x100)
+
+/* This operand is an absolute branch address.  The disassembler
+   prints these symbolically if possible.  */
+#define PPC_OPERAND_ABSOLUTE (0x200)
+
+/* This operand is optional, and is zero if omitted.  This is used for
+   example, in the optional BF field in the comparison instructions.  The
+   assembler must count the number of operands remaining on the line,
+   and the number of operands remaining for the opcode, and decide
+   whether this operand is present or not.  The disassembler should
+   print this operand out only if it is not zero.  */
+#define PPC_OPERAND_OPTIONAL (0x400)
+
+/* This flag is only used with PPC_OPERAND_OPTIONAL.  If this operand
+   is omitted, then for the next operand use this operand value plus
+   1, ignoring the next operand field for the opcode.  This wretched
+   hack is needed because the Power rotate instructions can take
+   either 4 or 5 operands.  The disassembler should print this operand
+   out regardless of the PPC_OPERAND_OPTIONAL field.  */
+#define PPC_OPERAND_NEXT (0x800)
+
+/* This operand should be regarded as a negative number for the
+   purposes of overflow checking (i.e., the normal most negative
+   number is disallowed and one more than the normal most positive
+   number is allowed).  This flag will only be set for a signed
+   operand.  */
+#define PPC_OPERAND_NEGATIVE (0x1000)
+
+/* This operand names a vector unit register.  The disassembler
+   prints these with a leading 'v'.  */
+#define PPC_OPERAND_VR (0x2000)
+
+/* This operand is for the DS field in a DS form instruction.  */
+#define PPC_OPERAND_DS (0x4000)
+
+/* This operand is for the DQ field in a DQ form instruction.  */
+#define PPC_OPERAND_DQ (0x8000)
+
+/* Valid range of operand is 0..n rather than 0..n-1.  */
+#define PPC_OPERAND_PLUS1 (0x10000)
+
+/* Xilinx APU and FSL related operands */
+#define PPC_OPERAND_FSL (0x20000)
+#define PPC_OPERAND_FCR (0x40000)
+#define PPC_OPERAND_UDI (0x80000)
+
+/* This operand names a vector-scalar unit register.  The disassembler
+   prints these with a leading 'vs'.  */
+#define PPC_OPERAND_VSR (0x100000)
+
+/* This is a CR FIELD that does not use symbolic names.  */
+#define PPC_OPERAND_CR_REG (0x200000)
+
+/* This flag is only used with PPC_OPERAND_OPTIONAL.  If this operand
+   is omitted, then the value it should use for the operand is stored
+   in the SHIFT field of the immediatly following operand field.  */
+#define PPC_OPERAND_OPTIONAL_VALUE (0x400000)
+
+/* This flag is only used with PPC_OPERAND_OPTIONAL.  The operand is
+   only optional when generating 32-bit code.  */
+#define PPC_OPERAND_OPTIONAL32 (0x800000)
+
+/* The POWER and PowerPC assemblers use a few macros.  We keep them
+   with the operands table for simplicity.  The macro table is an
+   array of struct powerpc_macro.  */
+
+struct powerpc_macro
+{
+  /* The macro name.  */
+  const char *name;
+
+  /* The number of operands the macro takes.  */
+  unsigned int operands;
+
+  /* One bit flags for the opcode.  These are used to indicate which
+     specific processors support the instructions.  The values are the
+     same as those for the struct powerpc_opcode flags field.  */
+  ppc_cpu_t flags;
+
+  /* A format string to turn the macro into a normal instruction.
+     Each %N in the string is replaced with operand number N (zero
+     based).  */
+  const char *format;
+};
+
+extern const struct powerpc_macro powerpc_macros[];
+extern const int powerpc_num_macros;
+
+static inline long
+ppc_optional_operand_value (const struct powerpc_operand *operand)
+{
+  if ((operand->flags & PPC_OPERAND_OPTIONAL_VALUE) != 0)
+    return (operand+1)->shift;
+  return 0;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PPC_H */