Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 161 insertions, 0 deletions

diff --git a/arch/riscv/include/asm/errata_list.h b/arch/riscv/include/asm/errata_list.h
new file mode 100644
index 000000000..4180312d2
--- /dev/null
+++ b/arch/riscv/include/asm/errata_list.h
@@ -0,0 +1,161 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021 Sifive.
+ */
+#ifndef ASM_ERRATA_LIST_H
+#define ASM_ERRATA_LIST_H
+
+#include <asm/alternative.h>
+#include <asm/csr.h>
+#include <asm/vendorid_list.h>
+
+#ifdef CONFIG_ERRATA_SIFIVE
+#define	ERRATA_SIFIVE_CIP_453 0
+#define	ERRATA_SIFIVE_CIP_1200 1
+#define	ERRATA_SIFIVE_NUMBER 2
+#endif
+
+#ifdef CONFIG_ERRATA_THEAD
+#define	ERRATA_THEAD_PBMT 0
+#define	ERRATA_THEAD_CMO 1
+#define	ERRATA_THEAD_PMU 2
+#define	ERRATA_THEAD_NUMBER 3
+#endif
+
+#define	CPUFEATURE_SVPBMT 0
+#define	CPUFEATURE_ZICBOM 1
+#define	CPUFEATURE_NUMBER 2
+
+#ifdef __ASSEMBLY__
+
+#define ALT_INSN_FAULT(x)						\
+ALTERNATIVE(__stringify(RISCV_PTR do_trap_insn_fault),			\
+	    __stringify(RISCV_PTR sifive_cip_453_insn_fault_trp),	\
+	    SIFIVE_VENDOR_ID, ERRATA_SIFIVE_CIP_453,			\
+	    CONFIG_ERRATA_SIFIVE_CIP_453)
+
+#define ALT_PAGE_FAULT(x)						\
+ALTERNATIVE(__stringify(RISCV_PTR do_page_fault),			\
+	    __stringify(RISCV_PTR sifive_cip_453_page_fault_trp),	\
+	    SIFIVE_VENDOR_ID, ERRATA_SIFIVE_CIP_453,			\
+	    CONFIG_ERRATA_SIFIVE_CIP_453)
+#else /* !__ASSEMBLY__ */
+
+#define ALT_FLUSH_TLB_PAGE(x)						\
+asm(ALTERNATIVE("sfence.vma %0", "sfence.vma", SIFIVE_VENDOR_ID,	\
+		ERRATA_SIFIVE_CIP_1200, CONFIG_ERRATA_SIFIVE_CIP_1200)	\
+		: : "r" (addr) : "memory")
+
+/*
+ * _val is marked as "will be overwritten", so need to set it to 0
+ * in the default case.
+ */
+#define ALT_SVPBMT_SHIFT 61
+#define ALT_THEAD_PBMT_SHIFT 59
+#define ALT_SVPBMT(_val, prot)						\
+asm(ALTERNATIVE_2("li %0, 0\t\nnop",					\
+		  "li %0, %1\t\nslli %0,%0,%3", 0,			\
+			CPUFEATURE_SVPBMT, CONFIG_RISCV_ISA_SVPBMT,	\
+		  "li %0, %2\t\nslli %0,%0,%4", THEAD_VENDOR_ID,	\
+			ERRATA_THEAD_PBMT, CONFIG_ERRATA_THEAD_PBMT)	\
+		: "=r"(_val)						\
+		: "I"(prot##_SVPBMT >> ALT_SVPBMT_SHIFT),		\
+		  "I"(prot##_THEAD >> ALT_THEAD_PBMT_SHIFT),		\
+		  "I"(ALT_SVPBMT_SHIFT),				\
+		  "I"(ALT_THEAD_PBMT_SHIFT))
+
+#ifdef CONFIG_ERRATA_THEAD_PBMT
+/*
+ * IO/NOCACHE memory types are handled together with svpbmt,
+ * so on T-Head chips, check if no other memory type is set,
+ * and set the non-0 PMA type if applicable.
+ */
+#define ALT_THEAD_PMA(_val)						\
+asm volatile(ALTERNATIVE(						\
+	__nops(7),							\
+	"li      t3, %1\n\t"						\
+	"slli    t3, t3, %3\n\t"					\
+	"and     t3, %0, t3\n\t"					\
+	"bne     t3, zero, 2f\n\t"					\
+	"li      t3, %2\n\t"						\
+	"slli    t3, t3, %3\n\t"					\
+	"or      %0, %0, t3\n\t"					\
+	"2:",  THEAD_VENDOR_ID,						\
+		ERRATA_THEAD_PBMT, CONFIG_ERRATA_THEAD_PBMT)		\
+	: "+r"(_val)							\
+	: "I"(_PAGE_MTMASK_THEAD >> ALT_THEAD_PBMT_SHIFT),		\
+	  "I"(_PAGE_PMA_THEAD >> ALT_THEAD_PBMT_SHIFT),			\
+	  "I"(ALT_THEAD_PBMT_SHIFT)					\
+	: "t3")
+#else
+#define ALT_THEAD_PMA(_val)
+#endif
+
+/*
+ * dcache.ipa rs1 (invalidate, physical address)
+ * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
+ *   0000001    01010      rs1       000      00000  0001011
+ * dache.iva rs1 (invalida, virtual address)
+ *   0000001    00110      rs1       000      00000  0001011
+ *
+ * dcache.cpa rs1 (clean, physical address)
+ * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
+ *   0000001    01001      rs1       000      00000  0001011
+ * dcache.cva rs1 (clean, virtual address)
+ *   0000001    00100      rs1       000      00000  0001011
+ *
+ * dcache.cipa rs1 (clean then invalidate, physical address)
+ * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
+ *   0000001    01011      rs1       000      00000  0001011
+ * dcache.civa rs1 (... virtual address)
+ *   0000001    00111      rs1       000      00000  0001011
+ *
+ * sync.s (make sure all cache operations finished)
+ * | 31 - 25 | 24 - 20 | 19 - 15 | 14 - 12 | 11 - 7 | 6 - 0 |
+ *   0000000    11001     00000      000      00000  0001011
+ */
+#define THEAD_inval_A0	".long 0x0265000b"
+#define THEAD_clean_A0	".long 0x0245000b"
+#define THEAD_flush_A0	".long 0x0275000b"
+#define THEAD_SYNC_S	".long 0x0190000b"
+
+#define ALT_CMO_OP(_op, _start, _size, _cachesize)			\
+asm volatile(ALTERNATIVE_2(						\
+	__nops(6),							\
+	"mv a0, %1\n\t"							\
+	"j 2f\n\t"							\
+	"3:\n\t"							\
+	"cbo." __stringify(_op) " (a0)\n\t"				\
+	"add a0, a0, %0\n\t"						\
+	"2:\n\t"							\
+	"bltu a0, %2, 3b\n\t"						\
+	"nop", 0, CPUFEATURE_ZICBOM, CONFIG_RISCV_ISA_ZICBOM,		\
+	"mv a0, %1\n\t"							\
+	"j 2f\n\t"							\
+	"3:\n\t"							\
+	THEAD_##_op##_A0 "\n\t"						\
+	"add a0, a0, %0\n\t"						\
+	"2:\n\t"							\
+	"bltu a0, %2, 3b\n\t"						\
+	THEAD_SYNC_S, THEAD_VENDOR_ID,					\
+			ERRATA_THEAD_CMO, CONFIG_ERRATA_THEAD_CMO)	\
+	: : "r"(_cachesize),						\
+	    "r"((unsigned long)(_start) & ~((_cachesize) - 1UL)),	\
+	    "r"((unsigned long)(_start) + (_size))			\
+	: "a0")
+
+#define THEAD_C9XX_RV_IRQ_PMU			17
+#define THEAD_C9XX_CSR_SCOUNTEROF		0x5c5
+
+#define ALT_SBI_PMU_OVERFLOW(__ovl)					\
+asm volatile(ALTERNATIVE(						\
+	"csrr %0, " __stringify(CSR_SSCOUNTOVF),			\
+	"csrr %0, " __stringify(THEAD_C9XX_CSR_SCOUNTEROF),		\
+		THEAD_VENDOR_ID, ERRATA_THEAD_PMU,			\
+		CONFIG_ERRATA_THEAD_PMU)				\
+	: "=r" (__ovl) :						\
+	: "memory")
+
+#endif /* __ASSEMBLY__ */
+
+#endif