Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 170 insertions, 0 deletions

diff --git a/arch/s390/kernel/syscall.c b/arch/s390/kernel/syscall.c
new file mode 100644
index 000000000..dc2355c62
--- /dev/null
+++ b/arch/s390/kernel/syscall.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  S390 version
+ *    Copyright IBM Corp. 1999, 2000
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ *               Thomas Spatzier (tspat@de.ibm.com)
+ *
+ *  Derived from "arch/i386/kernel/sys_i386.c"
+ *
+ *  This file contains various random system calls that
+ *  have a non-standard calling sequence on the Linux/s390
+ *  platform.
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/smp.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/stat.h>
+#include <linux/syscalls.h>
+#include <linux/mman.h>
+#include <linux/file.h>
+#include <linux/utsname.h>
+#include <linux/personality.h>
+#include <linux/unistd.h>
+#include <linux/ipc.h>
+#include <linux/uaccess.h>
+#include <linux/string.h>
+#include <linux/thread_info.h>
+#include <linux/entry-common.h>
+
+#include <asm/ptrace.h>
+#include <asm/vtime.h>
+
+#include "entry.h"
+
+/*
+ * Perform the mmap() system call. Linux for S/390 isn't able to handle more
+ * than 5 system call parameters, so this system call uses a memory block
+ * for parameter passing.
+ */
+
+struct s390_mmap_arg_struct {
+	unsigned long addr;
+	unsigned long len;
+	unsigned long prot;
+	unsigned long flags;
+	unsigned long fd;
+	unsigned long offset;
+};
+
+SYSCALL_DEFINE1(mmap2, struct s390_mmap_arg_struct __user *, arg)
+{
+	struct s390_mmap_arg_struct a;
+	int error = -EFAULT;
+
+	if (copy_from_user(&a, arg, sizeof(a)))
+		goto out;
+	error = ksys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset);
+out:
+	return error;
+}
+
+#ifdef CONFIG_SYSVIPC
+/*
+ * sys_ipc() is the de-multiplexer for the SysV IPC calls.
+ */
+SYSCALL_DEFINE5(s390_ipc, uint, call, int, first, unsigned long, second,
+		unsigned long, third, void __user *, ptr)
+{
+	if (call >> 16)
+		return -EINVAL;
+	/* The s390 sys_ipc variant has only five parameters instead of six
+	 * like the generic variant. The only difference is the handling of
+	 * the SEMTIMEDOP subcall where on s390 the third parameter is used
+	 * as a pointer to a struct timespec where the generic variant uses
+	 * the fifth parameter.
+	 * Therefore we can call the generic variant by simply passing the
+	 * third parameter also as fifth parameter.
+	 */
+	return ksys_ipc(call, first, second, third, ptr, third);
+}
+#endif /* CONFIG_SYSVIPC */
+
+SYSCALL_DEFINE1(s390_personality, unsigned int, personality)
+{
+	unsigned int ret = current->personality;
+
+	if (personality(current->personality) == PER_LINUX32 &&
+	    personality(personality) == PER_LINUX)
+		personality |= PER_LINUX32;
+
+	if (personality != 0xffffffff)
+		set_personality(personality);
+
+	if (personality(ret) == PER_LINUX32)
+		ret &= ~PER_LINUX32;
+
+	return ret;
+}
+
+SYSCALL_DEFINE0(ni_syscall)
+{
+	return -ENOSYS;
+}
+
+static void do_syscall(struct pt_regs *regs)
+{
+	unsigned long nr;
+
+	nr = regs->int_code & 0xffff;
+	if (!nr) {
+		nr = regs->gprs[1] & 0xffff;
+		regs->int_code &= ~0xffffUL;
+		regs->int_code |= nr;
+	}
+
+	regs->gprs[2] = nr;
+
+	if (nr == __NR_restart_syscall && !(current->restart_block.arch_data & 1)) {
+		regs->psw.addr = current->restart_block.arch_data;
+		current->restart_block.arch_data = 1;
+	}
+	nr = syscall_enter_from_user_mode_work(regs, nr);
+
+	/*
+	 * In the s390 ptrace ABI, both the syscall number and the return value
+	 * use gpr2. However, userspace puts the syscall number either in the
+	 * svc instruction itself, or uses gpr1. To make at least skipping syscalls
+	 * work, the ptrace code sets PIF_SYSCALL_RET_SET, which is checked here
+	 * and if set, the syscall will be skipped.
+	 */
+
+	if (unlikely(test_and_clear_pt_regs_flag(regs, PIF_SYSCALL_RET_SET)))
+		goto out;
+	regs->gprs[2] = -ENOSYS;
+	if (likely(nr >= NR_syscalls))
+		goto out;
+	do {
+		regs->gprs[2] = current->thread.sys_call_table[nr](regs);
+	} while (test_and_clear_pt_regs_flag(regs, PIF_EXECVE_PGSTE_RESTART));
+out:
+	syscall_exit_to_user_mode_work(regs);
+}
+
+void noinstr __do_syscall(struct pt_regs *regs, int per_trap)
+{
+	add_random_kstack_offset();
+	enter_from_user_mode(regs);
+	regs->psw = S390_lowcore.svc_old_psw;
+	regs->int_code = S390_lowcore.svc_int_code;
+	update_timer_sys();
+	if (static_branch_likely(&cpu_has_bear))
+		current->thread.last_break = regs->last_break;
+
+	local_irq_enable();
+	regs->orig_gpr2 = regs->gprs[2];
+
+	if (per_trap)
+		set_thread_flag(TIF_PER_TRAP);
+
+	regs->flags = 0;
+	set_pt_regs_flag(regs, PIF_SYSCALL);
+	do_syscall(regs);
+	exit_to_user_mode();
+}