Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 254 insertions, 0 deletions

diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
new file mode 100644
index 000000000..411fdc090
--- /dev/null
+++ b/arch/sh/mm/Kconfig
@@ -0,0 +1,254 @@
+# SPDX-License-Identifier: GPL-2.0
+menu "Memory management options"
+
+config MMU
+        bool "Support for memory management hardware"
+	depends on !CPU_SH2
+	default y
+	help
+	  Some SH processors (such as SH-2/SH-2A) lack an MMU. In order to
+	  boot on these systems, this option must not be set.
+
+	  On other systems (such as the SH-3 and 4) where an MMU exists,
+	  turning this off will boot the kernel on these machines with the
+	  MMU implicitly switched off.
+
+config PAGE_OFFSET
+	hex
+	default "0x80000000" if MMU
+	default "0x00000000"
+
+config ARCH_FORCE_MAX_ORDER
+	int "Maximum zone order"
+	range 9 64 if PAGE_SIZE_16KB
+	default "9" if PAGE_SIZE_16KB
+	range 7 64 if PAGE_SIZE_64KB
+	default "7" if PAGE_SIZE_64KB
+	range 11 64
+	default "14" if !MMU
+	default "11"
+	help
+	  The kernel memory allocator divides physically contiguous memory
+	  blocks into "zones", where each zone is a power of two number of
+	  pages.  This option selects the largest power of two that the kernel
+	  keeps in the memory allocator.  If you need to allocate very large
+	  blocks of physically contiguous memory, then you may need to
+	  increase this value.
+
+	  This config option is actually maximum order plus one. For example,
+	  a value of 11 means that the largest free memory block is 2^10 pages.
+
+	  The page size is not necessarily 4KB. Keep this in mind when
+	  choosing a value for this option.
+
+config MEMORY_START
+	hex "Physical memory start address"
+	default "0x08000000"
+	help
+	  Computers built with Hitachi SuperH processors always
+	  map the ROM starting at address zero.  But the processor
+	  does not specify the range that RAM takes.
+
+	  The physical memory (RAM) start address will be automatically
+	  set to 08000000. Other platforms, such as the Solution Engine
+	  boards typically map RAM at 0C000000.
+
+	  Tweak this only when porting to a new machine which does not
+	  already have a defconfig. Changing it from the known correct
+	  value on any of the known systems will only lead to disaster.
+
+config MEMORY_SIZE
+	hex "Physical memory size"
+	default "0x04000000"
+	help
+	  This sets the default memory size assumed by your SH kernel. It can
+	  be overridden as normal by the 'mem=' argument on the kernel command
+	  line. If unsure, consult your board specifications or just leave it
+	  as 0x04000000 which was the default value before this became
+	  configurable.
+
+# Physical addressing modes
+
+config 29BIT
+	def_bool !32BIT
+	select UNCACHED_MAPPING
+
+config 32BIT
+	bool
+	default !MMU
+
+config PMB
+	bool "Support 32-bit physical addressing through PMB"
+	depends on MMU && CPU_SH4A && !CPU_SH4AL_DSP
+	select 32BIT
+	select UNCACHED_MAPPING
+	help
+	  If you say Y here, physical addressing will be extended to
+	  32-bits through the SH-4A PMB. If this is not set, legacy
+	  29-bit physical addressing will be used.
+
+config X2TLB
+	def_bool y
+	depends on (CPU_SHX2 || CPU_SHX3) && MMU
+
+config VSYSCALL
+	bool "Support vsyscall page"
+	depends on MMU && (CPU_SH3 || CPU_SH4)
+	default y
+	help
+	  This will enable support for the kernel mapping a vDSO page
+	  in process space, and subsequently handing down the entry point
+	  to the libc through the ELF auxiliary vector.
+
+	  From the kernel side this is used for the signal trampoline.
+	  For systems with an MMU that can afford to give up a page,
+	  (the default value) say Y.
+
+config NUMA
+	bool "Non-Uniform Memory Access (NUMA) Support"
+	depends on MMU && SYS_SUPPORTS_NUMA
+	select ARCH_WANT_NUMA_VARIABLE_LOCALITY
+	default n
+	help
+	  Some SH systems have many various memories scattered around
+	  the address space, each with varying latencies. This enables
+	  support for these blocks by binding them to nodes and allowing
+	  memory policies to be used for prioritizing and controlling
+	  allocation behaviour.
+
+config NODES_SHIFT
+	int
+	default "3" if CPU_SUBTYPE_SHX3
+	default "1"
+	depends on NUMA
+
+config ARCH_FLATMEM_ENABLE
+	def_bool y
+	depends on !NUMA
+
+config ARCH_SPARSEMEM_ENABLE
+	def_bool y
+	select SPARSEMEM_STATIC
+
+config ARCH_SPARSEMEM_DEFAULT
+	def_bool y
+
+config ARCH_SELECT_MEMORY_MODEL
+	def_bool y
+
+config ARCH_MEMORY_PROBE
+	def_bool y
+	depends on MEMORY_HOTPLUG
+
+config IOREMAP_FIXED
+       def_bool y
+       depends on X2TLB
+
+config UNCACHED_MAPPING
+	bool
+
+config HAVE_SRAM_POOL
+	bool
+	select GENERIC_ALLOCATOR
+
+choice
+	prompt "Kernel page size"
+	default PAGE_SIZE_4KB
+
+config PAGE_SIZE_4KB
+	bool "4kB"
+	help
+	  This is the default page size used by all SuperH CPUs.
+
+config PAGE_SIZE_8KB
+	bool "8kB"
+	depends on !MMU || X2TLB
+	help
+	  This enables 8kB pages as supported by SH-X2 and later MMUs.
+
+config PAGE_SIZE_16KB
+	bool "16kB"
+	depends on !MMU
+	help
+	  This enables 16kB pages on MMU-less SH systems.
+
+config PAGE_SIZE_64KB
+	bool "64kB"
+	depends on !MMU || CPU_SH4
+	help
+	  This enables support for 64kB pages, possible on all SH-4
+	  CPUs and later.
+
+endchoice
+
+choice
+	prompt "HugeTLB page size"
+	depends on HUGETLB_PAGE
+	default HUGETLB_PAGE_SIZE_1MB if PAGE_SIZE_64KB
+	default HUGETLB_PAGE_SIZE_64K
+
+config HUGETLB_PAGE_SIZE_64K
+	bool "64kB"
+	depends on !PAGE_SIZE_64KB
+
+config HUGETLB_PAGE_SIZE_256K
+	bool "256kB"
+	depends on X2TLB
+
+config HUGETLB_PAGE_SIZE_1MB
+	bool "1MB"
+
+config HUGETLB_PAGE_SIZE_4MB
+	bool "4MB"
+	depends on X2TLB
+
+config HUGETLB_PAGE_SIZE_64MB
+	bool "64MB"
+	depends on X2TLB
+
+endchoice
+
+config SCHED_MC
+	bool "Multi-core scheduler support"
+	depends on SMP
+	default y
+	help
+	  Multi-core scheduler support improves the CPU scheduler's decision
+	  making when dealing with multi-core CPU chips at a cost of slightly
+	  increased overhead in some places. If unsure say N here.
+
+endmenu
+
+menu "Cache configuration"
+
+config SH7705_CACHE_32KB
+	bool "Enable 32KB cache size for SH7705"
+	depends on CPU_SUBTYPE_SH7705
+	default y
+
+choice
+	prompt "Cache mode"
+	default CACHE_WRITEBACK if CPU_SH2A || CPU_SH3 || CPU_SH4
+	default CACHE_WRITETHROUGH if (CPU_SH2 && !CPU_SH2A)
+
+config CACHE_WRITEBACK
+	bool "Write-back"
+
+config CACHE_WRITETHROUGH
+	bool "Write-through"
+	help
+	  Selecting this option will configure the caches in write-through
+	  mode, as opposed to the default write-back configuration.
+
+	  Since there's sill some aliasing issues on SH-4, this option will
+	  unfortunately still require the majority of flushing functions to
+	  be implemented to deal with aliasing.
+
+	  If unsure, say N.
+
+config CACHE_OFF
+	bool "Off"
+
+endchoice
+
+endmenu