Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 303 insertions, 0 deletions

diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c
new file mode 100644
index 000000000..25727ed64
--- /dev/null
+++ b/arch/um/drivers/chan_user.c
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{linux.intel,addtoit}.com)
+ */
+
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+#include <sched.h>
+#include <signal.h>
+#include <termios.h>
+#include <sys/ioctl.h>
+#include "chan_user.h"
+#include <os.h>
+#include <um_malloc.h>
+
+void generic_close(int fd, void *unused)
+{
+	close(fd);
+}
+
+int generic_read(int fd, char *c_out, void *unused)
+{
+	int n;
+
+	n = read(fd, c_out, sizeof(*c_out));
+	if (n > 0)
+		return n;
+	else if (n == 0)
+		return -EIO;
+	else if (errno == EAGAIN)
+		return 0;
+	return -errno;
+}
+
+/* XXX Trivial wrapper around write */
+
+int generic_write(int fd, const char *buf, int n, void *unused)
+{
+	int err;
+
+	err = write(fd, buf, n);
+	if (err > 0)
+		return err;
+	else if (errno == EAGAIN)
+		return 0;
+	else if (err == 0)
+		return -EIO;
+	return -errno;
+}
+
+int generic_window_size(int fd, void *unused, unsigned short *rows_out,
+			unsigned short *cols_out)
+{
+	struct winsize size;
+	int ret;
+
+	if (ioctl(fd, TIOCGWINSZ, &size) < 0)
+		return -errno;
+
+	ret = ((*rows_out != size.ws_row) || (*cols_out != size.ws_col));
+
+	*rows_out = size.ws_row;
+	*cols_out = size.ws_col;
+
+	return ret;
+}
+
+void generic_free(void *data)
+{
+	kfree(data);
+}
+
+int generic_console_write(int fd, const char *buf, int n)
+{
+	sigset_t old, no_sigio;
+	struct termios save, new;
+	int err;
+
+	if (isatty(fd)) {
+		sigemptyset(&no_sigio);
+		sigaddset(&no_sigio, SIGIO);
+		if (sigprocmask(SIG_BLOCK, &no_sigio, &old))
+			goto error;
+
+		CATCH_EINTR(err = tcgetattr(fd, &save));
+		if (err)
+			goto error;
+		new = save;
+		/*
+		 * The terminal becomes a bit less raw, to handle \n also as
+		 * "Carriage Return", not only as "New Line". Otherwise, the new
+		 * line won't start at the first column.
+		 */
+		new.c_oflag |= OPOST;
+		CATCH_EINTR(err = tcsetattr(fd, TCSAFLUSH, &new));
+		if (err)
+			goto error;
+	}
+	err = generic_write(fd, buf, n, NULL);
+	/*
+	 * Restore raw mode, in any case; we *must* ignore any error apart
+	 * EINTR, except for debug.
+	 */
+	if (isatty(fd)) {
+		CATCH_EINTR(tcsetattr(fd, TCSAFLUSH, &save));
+		sigprocmask(SIG_SETMASK, &old, NULL);
+	}
+
+	return err;
+error:
+	return -errno;
+}
+
+/*
+ * UML SIGWINCH handling
+ *
+ * The point of this is to handle SIGWINCH on consoles which have host
+ * ttys and relay them inside UML to whatever might be running on the
+ * console and cares about the window size (since SIGWINCH notifies
+ * about terminal size changes).
+ *
+ * So, we have a separate thread for each host tty attached to a UML
+ * device (side-issue - I'm annoyed that one thread can't have
+ * multiple controlling ttys for the purpose of handling SIGWINCH, but
+ * I imagine there are other reasons that doesn't make any sense).
+ *
+ * SIGWINCH can't be received synchronously, so you have to set up to
+ * receive it as a signal.  That being the case, if you are going to
+ * wait for it, it is convenient to sit in sigsuspend() and wait for
+ * the signal to bounce you out of it (see below for how we make sure
+ * to exit only on SIGWINCH).
+ */
+
+static void winch_handler(int sig)
+{
+}
+
+struct winch_data {
+	int pty_fd;
+	int pipe_fd;
+};
+
+static int winch_thread(void *arg)
+{
+	struct winch_data *data = arg;
+	sigset_t sigs;
+	int pty_fd, pipe_fd;
+	int count;
+	char c = 1;
+
+	pty_fd = data->pty_fd;
+	pipe_fd = data->pipe_fd;
+	count = write(pipe_fd, &c, sizeof(c));
+	if (count != sizeof(c))
+		printk(UM_KERN_ERR "winch_thread : failed to write "
+		       "synchronization byte, err = %d\n", -count);
+
+	/*
+	 * We are not using SIG_IGN on purpose, so don't fix it as I thought to
+	 * do! If using SIG_IGN, the sigsuspend() call below would not stop on
+	 * SIGWINCH.
+	 */
+
+	signal(SIGWINCH, winch_handler);
+	sigfillset(&sigs);
+	/* Block all signals possible. */
+	if (sigprocmask(SIG_SETMASK, &sigs, NULL) < 0) {
+		printk(UM_KERN_ERR "winch_thread : sigprocmask failed, "
+		       "errno = %d\n", errno);
+		exit(1);
+	}
+	/* In sigsuspend(), block anything else than SIGWINCH. */
+	sigdelset(&sigs, SIGWINCH);
+
+	if (setsid() < 0) {
+		printk(UM_KERN_ERR "winch_thread : setsid failed, errno = %d\n",
+		       errno);
+		exit(1);
+	}
+
+	if (ioctl(pty_fd, TIOCSCTTY, 0) < 0) {
+		printk(UM_KERN_ERR "winch_thread : TIOCSCTTY failed on "
+		       "fd %d err = %d\n", pty_fd, errno);
+		exit(1);
+	}
+
+	if (tcsetpgrp(pty_fd, os_getpid()) < 0) {
+		printk(UM_KERN_ERR "winch_thread : tcsetpgrp failed on "
+		       "fd %d err = %d\n", pty_fd, errno);
+		exit(1);
+	}
+
+	/*
+	 * These are synchronization calls between various UML threads on the
+	 * host - since they are not different kernel threads, we cannot use
+	 * kernel semaphores. We don't use SysV semaphores because they are
+	 * persistent.
+	 */
+	count = read(pipe_fd, &c, sizeof(c));
+	if (count != sizeof(c))
+		printk(UM_KERN_ERR "winch_thread : failed to read "
+		       "synchronization byte, err = %d\n", errno);
+
+	while(1) {
+		/*
+		 * This will be interrupted by SIGWINCH only, since
+		 * other signals are blocked.
+		 */
+		sigsuspend(&sigs);
+
+		count = write(pipe_fd, &c, sizeof(c));
+		if (count != sizeof(c))
+			printk(UM_KERN_ERR "winch_thread : write failed, "
+			       "err = %d\n", errno);
+	}
+}
+
+static int winch_tramp(int fd, struct tty_port *port, int *fd_out,
+		       unsigned long *stack_out)
+{
+	struct winch_data data;
+	int fds[2], n, err, pid;
+	char c;
+
+	err = os_pipe(fds, 1, 1);
+	if (err < 0) {
+		printk(UM_KERN_ERR "winch_tramp : os_pipe failed, err = %d\n",
+		       -err);
+		goto out;
+	}
+
+	data = ((struct winch_data) { .pty_fd 		= fd,
+				      .pipe_fd 		= fds[1] } );
+	/*
+	 * CLONE_FILES so this thread doesn't hold open files which are open
+	 * now, but later closed in a different thread.  This is a
+	 * problem with /dev/net/tun, which if held open by this
+	 * thread, prevents the TUN/TAP device from being reused.
+	 */
+	pid = run_helper_thread(winch_thread, &data, CLONE_FILES, stack_out);
+	if (pid < 0) {
+		err = pid;
+		printk(UM_KERN_ERR "fork of winch_thread failed - errno = %d\n",
+		       -err);
+		goto out_close;
+	}
+
+	*fd_out = fds[0];
+	n = read(fds[0], &c, sizeof(c));
+	if (n != sizeof(c)) {
+		printk(UM_KERN_ERR "winch_tramp : failed to read "
+		       "synchronization byte\n");
+		printk(UM_KERN_ERR "read failed, err = %d\n", errno);
+		printk(UM_KERN_ERR "fd %d will not support SIGWINCH\n", fd);
+		err = -EINVAL;
+		goto out_close;
+	}
+
+	err = os_set_fd_block(*fd_out, 0);
+	if (err) {
+		printk(UM_KERN_ERR "winch_tramp: failed to set thread_fd "
+		       "non-blocking.\n");
+		goto out_close;
+	}
+
+	return pid;
+
+ out_close:
+	close(fds[1]);
+	close(fds[0]);
+ out:
+	return err;
+}
+
+void register_winch(int fd, struct tty_port *port)
+{
+	unsigned long stack;
+	int pid, thread, count, thread_fd = -1;
+	char c = 1;
+
+	if (!isatty(fd))
+		return;
+
+	pid = tcgetpgrp(fd);
+	if (is_skas_winch(pid, fd, port)) {
+		register_winch_irq(-1, fd, -1, port, 0);
+		return;
+	}
+
+	if (pid == -1) {
+		thread = winch_tramp(fd, port, &thread_fd, &stack);
+		if (thread < 0)
+			return;
+
+		register_winch_irq(thread_fd, fd, thread, port, stack);
+
+		count = write(thread_fd, &c, sizeof(c));
+		if (count != sizeof(c))
+			printk(UM_KERN_ERR "register_winch : failed to write "
+			       "synchronization byte, err = %d\n", errno);
+	}
+}