Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 749 insertions, 0 deletions

diff --git a/arch/x86/crypto/sha512-avx2-asm.S b/arch/x86/crypto/sha512-avx2-asm.S
new file mode 100644
index 000000000..b1ca99055
--- /dev/null
+++ b/arch/x86/crypto/sha512-avx2-asm.S
@@ -0,0 +1,749 @@
+########################################################################
+# Implement fast SHA-512 with AVX2 instructions. (x86_64)
+#
+# Copyright (C) 2013 Intel Corporation.
+#
+# Authors:
+#     James Guilford <james.guilford@intel.com>
+#     Kirk Yap <kirk.s.yap@intel.com>
+#     David Cote <david.m.cote@intel.com>
+#     Tim Chen <tim.c.chen@linux.intel.com>
+#
+# This software is available to you under a choice of one of two
+# licenses.  You may choose to be licensed under the terms of the GNU
+# General Public License (GPL) Version 2, available from the file
+# COPYING in the main directory of this source tree, or the
+# OpenIB.org BSD license below:
+#
+#     Redistribution and use in source and binary forms, with or
+#     without modification, are permitted provided that the following
+#     conditions are met:
+#
+#      - Redistributions of source code must retain the above
+#        copyright notice, this list of conditions and the following
+#        disclaimer.
+#
+#      - Redistributions in binary form must reproduce the above
+#        copyright notice, this list of conditions and the following
+#        disclaimer in the documentation and/or other materials
+#        provided with the distribution.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+# BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+# ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+# SOFTWARE.
+#
+########################################################################
+#
+# This code is described in an Intel White-Paper:
+# "Fast SHA-512 Implementations on Intel Architecture Processors"
+#
+# To find it, surf to http://www.intel.com/p/en_US/embedded
+# and search for that title.
+#
+########################################################################
+# This code schedules 1 blocks at a time, with 4 lanes per block
+########################################################################
+
+#include <linux/linkage.h>
+#include <linux/cfi_types.h>
+
+.text
+
+# Virtual Registers
+Y_0 = %ymm4
+Y_1 = %ymm5
+Y_2 = %ymm6
+Y_3 = %ymm7
+
+YTMP0 = %ymm0
+YTMP1 = %ymm1
+YTMP2 = %ymm2
+YTMP3 = %ymm3
+YTMP4 = %ymm8
+XFER  = YTMP0
+
+BYTE_FLIP_MASK  = %ymm9
+
+# 1st arg is %rdi, which is saved to the stack and accessed later via %r12
+CTX1        = %rdi
+CTX2        = %r12
+# 2nd arg
+INP         = %rsi
+# 3rd arg
+NUM_BLKS    = %rdx
+
+c           = %rcx
+d           = %r8
+e           = %rdx
+y3          = %rsi
+
+TBL   = %rdi # clobbers CTX1
+
+a     = %rax
+b     = %rbx
+
+f     = %r9
+g     = %r10
+h     = %r11
+old_h = %r11
+
+T1    = %r12 # clobbers CTX2
+y0    = %r13
+y1    = %r14
+y2    = %r15
+
+# Local variables (stack frame)
+XFER_SIZE = 4*8
+SRND_SIZE = 1*8
+INP_SIZE = 1*8
+INPEND_SIZE = 1*8
+CTX_SIZE = 1*8
+
+frame_XFER = 0
+frame_SRND = frame_XFER + XFER_SIZE
+frame_INP = frame_SRND + SRND_SIZE
+frame_INPEND = frame_INP + INP_SIZE
+frame_CTX = frame_INPEND + INPEND_SIZE
+frame_size = frame_CTX + CTX_SIZE
+
+## assume buffers not aligned
+#define	VMOVDQ vmovdqu
+
+# addm [mem], reg
+# Add reg to mem using reg-mem add and store
+.macro addm p1 p2
+	add	\p1, \p2
+	mov	\p2, \p1
+.endm
+
+
+# COPY_YMM_AND_BSWAP ymm, [mem], byte_flip_mask
+# Load ymm with mem and byte swap each dword
+.macro COPY_YMM_AND_BSWAP p1 p2 p3
+	VMOVDQ \p2, \p1
+	vpshufb \p3, \p1, \p1
+.endm
+# rotate_Ys
+# Rotate values of symbols Y0...Y3
+.macro rotate_Ys
+	Y_ = Y_0
+	Y_0 = Y_1
+	Y_1 = Y_2
+	Y_2 = Y_3
+	Y_3 = Y_
+.endm
+
+# RotateState
+.macro RotateState
+	# Rotate symbols a..h right
+	old_h  = h
+	TMP_   = h
+	h      = g
+	g      = f
+	f      = e
+	e      = d
+	d      = c
+	c      = b
+	b      = a
+	a      = TMP_
+.endm
+
+# macro MY_VPALIGNR	YDST, YSRC1, YSRC2, RVAL
+# YDST = {YSRC1, YSRC2} >> RVAL*8
+.macro MY_VPALIGNR YDST YSRC1 YSRC2 RVAL
+	vperm2f128      $0x3, \YSRC2, \YSRC1, \YDST     # YDST = {YS1_LO, YS2_HI}
+	vpalignr        $\RVAL, \YSRC2, \YDST, \YDST    # YDST = {YDS1, YS2} >> RVAL*8
+.endm
+
+.macro FOUR_ROUNDS_AND_SCHED
+################################### RND N + 0 #########################################
+
+	# Extract w[t-7]
+	MY_VPALIGNR	YTMP0, Y_3, Y_2, 8		# YTMP0 = W[-7]
+	# Calculate w[t-16] + w[t-7]
+	vpaddq		Y_0, YTMP0, YTMP0		# YTMP0 = W[-7] + W[-16]
+	# Extract w[t-15]
+	MY_VPALIGNR	YTMP1, Y_1, Y_0, 8		# YTMP1 = W[-15]
+
+	# Calculate sigma0
+
+	# Calculate w[t-15] ror 1
+	vpsrlq		$1, YTMP1, YTMP2
+	vpsllq		$(64-1), YTMP1, YTMP3
+	vpor		YTMP2, YTMP3, YTMP3		# YTMP3 = W[-15] ror 1
+	# Calculate w[t-15] shr 7
+	vpsrlq		$7, YTMP1, YTMP4		# YTMP4 = W[-15] >> 7
+
+	mov	a, y3		# y3 = a                                # MAJA
+	rorx	$41, e, y0	# y0 = e >> 41				# S1A
+	rorx	$18, e, y1	# y1 = e >> 18				# S1B
+	add	frame_XFER(%rsp),h		# h = k + w + h         # --
+	or	c, y3		# y3 = a|c                              # MAJA
+	mov	f, y2		# y2 = f                                # CH
+	rorx	$34, a, T1	# T1 = a >> 34				# S0B
+
+	xor	y1, y0		# y0 = (e>>41) ^ (e>>18)		# S1
+	xor	g, y2		# y2 = f^g                              # CH
+	rorx	$14, e, y1	# y1 = (e >> 14)			# S1
+
+	and	e, y2		# y2 = (f^g)&e                          # CH
+	xor	y1, y0		# y0 = (e>>41) ^ (e>>18) ^ (e>>14)	# S1
+	rorx	$39, a, y1	# y1 = a >> 39				# S0A
+	add	h, d		# d = k + w + h + d                     # --
+
+	and	b, y3		# y3 = (a|c)&b                          # MAJA
+	xor	T1, y1		# y1 = (a>>39) ^ (a>>34)		# S0
+	rorx	$28, a, T1	# T1 = (a >> 28)			# S0
+
+	xor	g, y2		# y2 = CH = ((f^g)&e)^g                 # CH
+	xor	T1, y1		# y1 = (a>>39) ^ (a>>34) ^ (a>>28)	# S0
+	mov	a, T1		# T1 = a                                # MAJB
+	and	c, T1		# T1 = a&c                              # MAJB
+
+	add	y0, y2		# y2 = S1 + CH                          # --
+	or	T1, y3		# y3 = MAJ = (a|c)&b)|(a&c)             # MAJ
+	add	y1, h		# h = k + w + h + S0                    # --
+
+	add	y2, d		# d = k + w + h + d + S1 + CH = d + t1  # --
+
+	add	y2, h		# h = k + w + h + S0 + S1 + CH = t1 + S0# --
+	add	y3, h		# h = t1 + S0 + MAJ                     # --
+
+	RotateState
+
+################################### RND N + 1 #########################################
+
+	# Calculate w[t-15] ror 8
+	vpsrlq		$8, YTMP1, YTMP2
+	vpsllq		$(64-8), YTMP1, YTMP1
+	vpor		YTMP2, YTMP1, YTMP1		# YTMP1 = W[-15] ror 8
+	# XOR the three components
+	vpxor		YTMP4, YTMP3, YTMP3		# YTMP3 = W[-15] ror 1 ^ W[-15] >> 7
+	vpxor		YTMP1, YTMP3, YTMP1		# YTMP1 = s0
+
+
+	# Add three components, w[t-16], w[t-7] and sigma0
+	vpaddq		YTMP1, YTMP0, YTMP0		# YTMP0 = W[-16] + W[-7] + s0
+	# Move to appropriate lanes for calculating w[16] and w[17]
+	vperm2f128	$0x0, YTMP0, YTMP0, Y_0		# Y_0 = W[-16] + W[-7] + s0 {BABA}
+	# Move to appropriate lanes for calculating w[18] and w[19]
+	vpand		MASK_YMM_LO(%rip), YTMP0, YTMP0	# YTMP0 = W[-16] + W[-7] + s0 {DC00}
+
+	# Calculate w[16] and w[17] in both 128 bit lanes
+
+	# Calculate sigma1 for w[16] and w[17] on both 128 bit lanes
+	vperm2f128	$0x11, Y_3, Y_3, YTMP2		# YTMP2 = W[-2] {BABA}
+	vpsrlq		$6, YTMP2, YTMP4		# YTMP4 = W[-2] >> 6 {BABA}
+
+
+	mov	a, y3		# y3 = a                                # MAJA
+	rorx	$41, e, y0	# y0 = e >> 41				# S1A
+	rorx	$18, e, y1	# y1 = e >> 18				# S1B
+	add	1*8+frame_XFER(%rsp), h		# h = k + w + h         # --
+	or	c, y3		# y3 = a|c                              # MAJA
+
+
+	mov	f, y2		# y2 = f                                # CH
+	rorx	$34, a, T1	# T1 = a >> 34				# S0B
+	xor	y1, y0		# y0 = (e>>41) ^ (e>>18)		# S1
+	xor	g, y2		# y2 = f^g                              # CH
+
+
+	rorx	$14, e, y1	# y1 = (e >> 14)			# S1
+	xor	y1, y0		# y0 = (e>>41) ^ (e>>18) ^ (e>>14)	# S1
+	rorx	$39, a, y1	# y1 = a >> 39				# S0A
+	and	e, y2		# y2 = (f^g)&e                          # CH
+	add	h, d		# d = k + w + h + d                     # --
+
+	and	b, y3		# y3 = (a|c)&b                          # MAJA
+	xor	T1, y1		# y1 = (a>>39) ^ (a>>34)		# S0
+
+	rorx	$28, a, T1	# T1 = (a >> 28)			# S0
+	xor	g, y2		# y2 = CH = ((f^g)&e)^g                 # CH
+
+	xor	T1, y1		# y1 = (a>>39) ^ (a>>34) ^ (a>>28)	# S0
+	mov	a, T1		# T1 = a                                # MAJB
+	and	c, T1		# T1 = a&c                              # MAJB
+	add	y0, y2		# y2 = S1 + CH                          # --
+
+	or	T1, y3		# y3 = MAJ = (a|c)&b)|(a&c)             # MAJ
+	add	y1, h		# h = k + w + h + S0                    # --
+
+	add	y2, d		# d = k + w + h + d + S1 + CH = d + t1  # --
+	add	y2, h		# h = k + w + h + S0 + S1 + CH = t1 + S0# --
+	add	y3, h		# h = t1 + S0 + MAJ                     # --
+
+	RotateState
+
+
+################################### RND N + 2 #########################################
+
+	vpsrlq		$19, YTMP2, YTMP3		# YTMP3 = W[-2] >> 19 {BABA}
+	vpsllq		$(64-19), YTMP2, YTMP1		# YTMP1 = W[-2] << 19 {BABA}
+	vpor		YTMP1, YTMP3, YTMP3		# YTMP3 = W[-2] ror 19 {BABA}
+	vpxor		YTMP3, YTMP4, YTMP4		# YTMP4 = W[-2] ror 19 ^ W[-2] >> 6 {BABA}
+	vpsrlq		$61, YTMP2, YTMP3		# YTMP3 = W[-2] >> 61 {BABA}
+	vpsllq		$(64-61), YTMP2, YTMP1		# YTMP1 = W[-2] << 61 {BABA}
+	vpor		YTMP1, YTMP3, YTMP3		# YTMP3 = W[-2] ror 61 {BABA}
+	vpxor		YTMP3, YTMP4, YTMP4		# YTMP4 = s1 = (W[-2] ror 19) ^
+							#  (W[-2] ror 61) ^ (W[-2] >> 6) {BABA}
+
+	# Add sigma1 to the other compunents to get w[16] and w[17]
+	vpaddq		YTMP4, Y_0, Y_0			# Y_0 = {W[1], W[0], W[1], W[0]}
+
+	# Calculate sigma1 for w[18] and w[19] for upper 128 bit lane
+	vpsrlq		$6, Y_0, YTMP4			# YTMP4 = W[-2] >> 6 {DC--}
+
+	mov	a, y3		# y3 = a                                # MAJA
+	rorx	$41, e, y0	# y0 = e >> 41				# S1A
+	add	2*8+frame_XFER(%rsp), h		# h = k + w + h         # --
+
+	rorx	$18, e, y1	# y1 = e >> 18				# S1B
+	or	c, y3		# y3 = a|c                              # MAJA
+	mov	f, y2		# y2 = f                                # CH
+	xor	g, y2		# y2 = f^g                              # CH
+
+	rorx	$34, a, T1	# T1 = a >> 34				# S0B
+	xor	y1, y0		# y0 = (e>>41) ^ (e>>18)		# S1
+	and	e, y2		# y2 = (f^g)&e                          # CH
+
+	rorx	$14, e, y1	# y1 = (e >> 14)			# S1
+	add	h, d		# d = k + w + h + d                     # --
+	and	b, y3		# y3 = (a|c)&b                          # MAJA
+
+	xor	y1, y0		# y0 = (e>>41) ^ (e>>18) ^ (e>>14)	# S1
+	rorx	$39, a, y1	# y1 = a >> 39				# S0A
+	xor	g, y2		# y2 = CH = ((f^g)&e)^g                 # CH
+
+	xor	T1, y1		# y1 = (a>>39) ^ (a>>34)		# S0
+	rorx	$28, a, T1	# T1 = (a >> 28)			# S0
+
+	xor	T1, y1		# y1 = (a>>39) ^ (a>>34) ^ (a>>28)	# S0
+	mov	a, T1		# T1 = a                                # MAJB
+	and	c, T1		# T1 = a&c                              # MAJB
+	add	y0, y2		# y2 = S1 + CH                          # --
+
+	or	T1, y3		# y3 = MAJ = (a|c)&b)|(a&c)             # MAJ
+	add	y1, h		# h = k + w + h + S0                    # --
+	add	y2, d		# d = k + w + h + d + S1 + CH = d + t1  # --
+	add	y2, h		# h = k + w + h + S0 + S1 + CH = t1 + S0# --
+
+	add	y3, h		# h = t1 + S0 + MAJ                     # --
+
+	RotateState
+
+################################### RND N + 3 #########################################
+
+	vpsrlq		$19, Y_0, YTMP3			# YTMP3 = W[-2] >> 19 {DC--}
+	vpsllq		$(64-19), Y_0, YTMP1		# YTMP1 = W[-2] << 19 {DC--}
+	vpor		YTMP1, YTMP3, YTMP3		# YTMP3 = W[-2] ror 19 {DC--}
+	vpxor		YTMP3, YTMP4, YTMP4		# YTMP4 = W[-2] ror 19 ^ W[-2] >> 6 {DC--}
+	vpsrlq		$61, Y_0, YTMP3			# YTMP3 = W[-2] >> 61 {DC--}
+	vpsllq		$(64-61), Y_0, YTMP1		# YTMP1 = W[-2] << 61 {DC--}
+	vpor		YTMP1, YTMP3, YTMP3		# YTMP3 = W[-2] ror 61 {DC--}
+	vpxor		YTMP3, YTMP4, YTMP4		# YTMP4 = s1 = (W[-2] ror 19) ^
+							#  (W[-2] ror 61) ^ (W[-2] >> 6) {DC--}
+
+	# Add the sigma0 + w[t-7] + w[t-16] for w[18] and w[19]
+	# to newly calculated sigma1 to get w[18] and w[19]
+	vpaddq		YTMP4, YTMP0, YTMP2		# YTMP2 = {W[3], W[2], --, --}
+
+	# Form w[19, w[18], w17], w[16]
+	vpblendd		$0xF0, YTMP2, Y_0, Y_0		# Y_0 = {W[3], W[2], W[1], W[0]}
+
+	mov	a, y3		# y3 = a                                # MAJA
+	rorx	$41, e, y0	# y0 = e >> 41				# S1A
+	rorx	$18, e, y1	# y1 = e >> 18				# S1B
+	add	3*8+frame_XFER(%rsp), h		# h = k + w + h         # --
+	or	c, y3		# y3 = a|c                              # MAJA
+
+
+	mov	f, y2		# y2 = f                                # CH
+	rorx	$34, a, T1	# T1 = a >> 34				# S0B
+	xor	y1, y0		# y0 = (e>>41) ^ (e>>18)		# S1
+	xor	g, y2		# y2 = f^g                              # CH
+
+
+	rorx	$14, e, y1	# y1 = (e >> 14)			# S1
+	and	e, y2		# y2 = (f^g)&e                          # CH
+	add	h, d		# d = k + w + h + d                     # --
+	and	b, y3		# y3 = (a|c)&b                          # MAJA
+
+	xor	y1, y0		# y0 = (e>>41) ^ (e>>18) ^ (e>>14)	# S1
+	xor	g, y2		# y2 = CH = ((f^g)&e)^g                 # CH
+
+	rorx	$39, a, y1	# y1 = a >> 39				# S0A
+	add	y0, y2		# y2 = S1 + CH                          # --
+
+	xor	T1, y1		# y1 = (a>>39) ^ (a>>34)		# S0
+	add	y2, d		# d = k + w + h + d + S1 + CH = d + t1  # --
+
+	rorx	$28, a, T1	# T1 = (a >> 28)			# S0
+
+	xor	T1, y1		# y1 = (a>>39) ^ (a>>34) ^ (a>>28)	# S0
+	mov	a, T1		# T1 = a                                # MAJB
+	and	c, T1		# T1 = a&c                              # MAJB
+	or	T1, y3		# y3 = MAJ = (a|c)&b)|(a&c)             # MAJ
+
+	add	y1, h		# h = k + w + h + S0                    # --
+	add	y2, h		# h = k + w + h + S0 + S1 + CH = t1 + S0# --
+	add	y3, h		# h = t1 + S0 + MAJ                     # --
+
+	RotateState
+
+	rotate_Ys
+.endm
+
+.macro DO_4ROUNDS
+
+################################### RND N + 0 #########################################
+
+	mov	f, y2		# y2 = f                                # CH
+	rorx	$41, e, y0	# y0 = e >> 41				# S1A
+	rorx	$18, e, y1	# y1 = e >> 18				# S1B
+	xor	g, y2		# y2 = f^g                              # CH
+
+	xor	y1, y0		# y0 = (e>>41) ^ (e>>18)		# S1
+	rorx	$14, e, y1	# y1 = (e >> 14)			# S1
+	and	e, y2		# y2 = (f^g)&e                          # CH
+
+	xor	y1, y0		# y0 = (e>>41) ^ (e>>18) ^ (e>>14)	# S1
+	rorx	$34, a, T1	# T1 = a >> 34				# S0B
+	xor	g, y2		# y2 = CH = ((f^g)&e)^g                 # CH
+	rorx	$39, a, y1	# y1 = a >> 39				# S0A
+	mov	a, y3		# y3 = a                                # MAJA
+
+	xor	T1, y1		# y1 = (a>>39) ^ (a>>34)		# S0
+	rorx	$28, a, T1	# T1 = (a >> 28)			# S0
+	add	frame_XFER(%rsp), h		# h = k + w + h         # --
+	or	c, y3		# y3 = a|c                              # MAJA
+
+	xor	T1, y1		# y1 = (a>>39) ^ (a>>34) ^ (a>>28)	# S0
+	mov	a, T1		# T1 = a                                # MAJB
+	and	b, y3		# y3 = (a|c)&b                          # MAJA
+	and	c, T1		# T1 = a&c                              # MAJB
+	add	y0, y2		# y2 = S1 + CH                          # --
+
+	add	h, d		# d = k + w + h + d                     # --
+	or	T1, y3		# y3 = MAJ = (a|c)&b)|(a&c)             # MAJ
+	add	y1, h		# h = k + w + h + S0                    # --
+
+	add	y2, d		# d = k + w + h + d + S1 + CH = d + t1  # --
+
+	RotateState
+
+################################### RND N + 1 #########################################
+
+	add	y2, old_h	# h = k + w + h + S0 + S1 + CH = t1 + S0# --
+	mov	f, y2		# y2 = f                                # CH
+	rorx	$41, e, y0	# y0 = e >> 41				# S1A
+	rorx	$18, e, y1	# y1 = e >> 18				# S1B
+	xor	g, y2		# y2 = f^g                              # CH
+
+	xor	y1, y0		# y0 = (e>>41) ^ (e>>18)		# S1
+	rorx	$14, e, y1	# y1 = (e >> 14)			# S1
+	and	e, y2		# y2 = (f^g)&e                          # CH
+	add	y3, old_h	# h = t1 + S0 + MAJ                     # --
+
+	xor	y1, y0		# y0 = (e>>41) ^ (e>>18) ^ (e>>14)	# S1
+	rorx	$34, a, T1	# T1 = a >> 34				# S0B
+	xor	g, y2		# y2 = CH = ((f^g)&e)^g                 # CH
+	rorx	$39, a, y1	# y1 = a >> 39				# S0A
+	mov	a, y3		# y3 = a                                # MAJA
+
+	xor	T1, y1		# y1 = (a>>39) ^ (a>>34)		# S0
+	rorx	$28, a, T1	# T1 = (a >> 28)			# S0
+	add	8*1+frame_XFER(%rsp), h		# h = k + w + h         # --
+	or	c, y3		# y3 = a|c                              # MAJA
+
+	xor	T1, y1		# y1 = (a>>39) ^ (a>>34) ^ (a>>28)	# S0
+	mov	a, T1		# T1 = a                                # MAJB
+	and	b, y3		# y3 = (a|c)&b                          # MAJA
+	and	c, T1		# T1 = a&c                              # MAJB
+	add	y0, y2		# y2 = S1 + CH                          # --
+
+	add	h, d		# d = k + w + h + d                     # --
+	or	T1, y3		# y3 = MAJ = (a|c)&b)|(a&c)             # MAJ
+	add	y1, h		# h = k + w + h + S0                    # --
+
+	add	y2, d		# d = k + w + h + d + S1 + CH = d + t1  # --
+
+	RotateState
+
+################################### RND N + 2 #########################################
+
+	add	y2, old_h	# h = k + w + h + S0 + S1 + CH = t1 + S0# --
+	mov	f, y2		# y2 = f                                # CH
+	rorx	$41, e, y0	# y0 = e >> 41				# S1A
+	rorx	$18, e, y1	# y1 = e >> 18				# S1B
+	xor	g, y2		# y2 = f^g                              # CH
+
+	xor	y1, y0		# y0 = (e>>41) ^ (e>>18)		# S1
+	rorx	$14, e, y1	# y1 = (e >> 14)			# S1
+	and	e, y2		# y2 = (f^g)&e                          # CH
+	add	y3, old_h	# h = t1 + S0 + MAJ                     # --
+
+	xor	y1, y0		# y0 = (e>>41) ^ (e>>18) ^ (e>>14)	# S1
+	rorx	$34, a, T1	# T1 = a >> 34				# S0B
+	xor	g, y2		# y2 = CH = ((f^g)&e)^g                 # CH
+	rorx	$39, a, y1	# y1 = a >> 39				# S0A
+	mov	a, y3		# y3 = a                                # MAJA
+
+	xor	T1, y1		# y1 = (a>>39) ^ (a>>34)		# S0
+	rorx	$28, a, T1	# T1 = (a >> 28)			# S0
+	add	8*2+frame_XFER(%rsp), h		# h = k + w + h         # --
+	or	c, y3		# y3 = a|c                              # MAJA
+
+	xor	T1, y1		# y1 = (a>>39) ^ (a>>34) ^ (a>>28)	# S0
+	mov	a, T1		# T1 = a                                # MAJB
+	and	b, y3		# y3 = (a|c)&b                          # MAJA
+	and	c, T1		# T1 = a&c                              # MAJB
+	add	y0, y2		# y2 = S1 + CH                          # --
+
+	add	h, d		# d = k + w + h + d                     # --
+	or	T1, y3		# y3 = MAJ = (a|c)&b)|(a&c)             # MAJ
+	add	y1, h		# h = k + w + h + S0                    # --
+
+	add	y2, d		# d = k + w + h + d + S1 + CH = d + t1  # --
+
+	RotateState
+
+################################### RND N + 3 #########################################
+
+	add	y2, old_h	# h = k + w + h + S0 + S1 + CH = t1 + S0# --
+	mov	f, y2		# y2 = f                                # CH
+	rorx	$41, e, y0	# y0 = e >> 41				# S1A
+	rorx	$18, e, y1	# y1 = e >> 18				# S1B
+	xor	g, y2		# y2 = f^g                              # CH
+
+	xor	y1, y0		# y0 = (e>>41) ^ (e>>18)		# S1
+	rorx	$14, e, y1	# y1 = (e >> 14)			# S1
+	and	e, y2		# y2 = (f^g)&e                          # CH
+	add	y3, old_h	# h = t1 + S0 + MAJ                     # --
+
+	xor	y1, y0		# y0 = (e>>41) ^ (e>>18) ^ (e>>14)	# S1
+	rorx	$34, a, T1	# T1 = a >> 34				# S0B
+	xor	g, y2		# y2 = CH = ((f^g)&e)^g                 # CH
+	rorx	$39, a, y1	# y1 = a >> 39				# S0A
+	mov	a, y3		# y3 = a                                # MAJA
+
+	xor	T1, y1		# y1 = (a>>39) ^ (a>>34)		# S0
+	rorx	$28, a, T1	# T1 = (a >> 28)			# S0
+	add	8*3+frame_XFER(%rsp), h		# h = k + w + h         # --
+	or	c, y3		# y3 = a|c                              # MAJA
+
+	xor	T1, y1		# y1 = (a>>39) ^ (a>>34) ^ (a>>28)	# S0
+	mov	a, T1		# T1 = a                                # MAJB
+	and	b, y3		# y3 = (a|c)&b                          # MAJA
+	and	c, T1		# T1 = a&c                              # MAJB
+	add	y0, y2		# y2 = S1 + CH                          # --
+
+
+	add	h, d		# d = k + w + h + d                     # --
+	or	T1, y3		# y3 = MAJ = (a|c)&b)|(a&c)             # MAJ
+	add	y1, h		# h = k + w + h + S0                    # --
+
+	add	y2, d		# d = k + w + h + d + S1 + CH = d + t1  # --
+
+	add	y2, h		# h = k + w + h + S0 + S1 + CH = t1 + S0# --
+
+	add	y3, h		# h = t1 + S0 + MAJ                     # --
+
+	RotateState
+
+.endm
+
+########################################################################
+# void sha512_transform_rorx(sha512_state *state, const u8 *data, int blocks)
+# Purpose: Updates the SHA512 digest stored at "state" with the message
+# stored in "data".
+# The size of the message pointed to by "data" must be an integer multiple
+# of SHA512 message blocks.
+# "blocks" is the message length in SHA512 blocks
+########################################################################
+SYM_TYPED_FUNC_START(sha512_transform_rorx)
+	# Save GPRs
+	push	%rbx
+	push	%r12
+	push	%r13
+	push	%r14
+	push	%r15
+
+	# Allocate Stack Space
+	push	%rbp
+	mov	%rsp, %rbp
+	sub	$frame_size, %rsp
+	and	$~(0x20 - 1), %rsp
+
+	shl	$7, NUM_BLKS	# convert to bytes
+	jz	done_hash
+	add	INP, NUM_BLKS	# pointer to end of data
+	mov	NUM_BLKS, frame_INPEND(%rsp)
+
+	## load initial digest
+	mov	8*0(CTX1), a
+	mov	8*1(CTX1), b
+	mov	8*2(CTX1), c
+	mov	8*3(CTX1), d
+	mov	8*4(CTX1), e
+	mov	8*5(CTX1), f
+	mov	8*6(CTX1), g
+	mov	8*7(CTX1), h
+
+	# save %rdi (CTX) before it gets clobbered
+	mov	%rdi, frame_CTX(%rsp)
+
+	vmovdqa	PSHUFFLE_BYTE_FLIP_MASK(%rip), BYTE_FLIP_MASK
+
+loop0:
+	lea	K512(%rip), TBL
+
+	## byte swap first 16 dwords
+	COPY_YMM_AND_BSWAP	Y_0, (INP), BYTE_FLIP_MASK
+	COPY_YMM_AND_BSWAP	Y_1, 1*32(INP), BYTE_FLIP_MASK
+	COPY_YMM_AND_BSWAP	Y_2, 2*32(INP), BYTE_FLIP_MASK
+	COPY_YMM_AND_BSWAP	Y_3, 3*32(INP), BYTE_FLIP_MASK
+
+	mov	INP, frame_INP(%rsp)
+
+	## schedule 64 input dwords, by doing 12 rounds of 4 each
+	movq	$4, frame_SRND(%rsp)
+
+.align 16
+loop1:
+	vpaddq	(TBL), Y_0, XFER
+	vmovdqa XFER, frame_XFER(%rsp)
+	FOUR_ROUNDS_AND_SCHED
+
+	vpaddq	1*32(TBL), Y_0, XFER
+	vmovdqa XFER, frame_XFER(%rsp)
+	FOUR_ROUNDS_AND_SCHED
+
+	vpaddq	2*32(TBL), Y_0, XFER
+	vmovdqa XFER, frame_XFER(%rsp)
+	FOUR_ROUNDS_AND_SCHED
+
+	vpaddq	3*32(TBL), Y_0, XFER
+	vmovdqa XFER, frame_XFER(%rsp)
+	add	$(4*32), TBL
+	FOUR_ROUNDS_AND_SCHED
+
+	subq	$1, frame_SRND(%rsp)
+	jne	loop1
+
+	movq	$2, frame_SRND(%rsp)
+loop2:
+	vpaddq	(TBL), Y_0, XFER
+	vmovdqa XFER, frame_XFER(%rsp)
+	DO_4ROUNDS
+	vpaddq	1*32(TBL), Y_1, XFER
+	vmovdqa XFER, frame_XFER(%rsp)
+	add	$(2*32), TBL
+	DO_4ROUNDS
+
+	vmovdqa	Y_2, Y_0
+	vmovdqa	Y_3, Y_1
+
+	subq	$1, frame_SRND(%rsp)
+	jne	loop2
+
+	mov	frame_CTX(%rsp), CTX2
+	addm	8*0(CTX2), a
+	addm	8*1(CTX2), b
+	addm	8*2(CTX2), c
+	addm	8*3(CTX2), d
+	addm	8*4(CTX2), e
+	addm	8*5(CTX2), f
+	addm	8*6(CTX2), g
+	addm	8*7(CTX2), h
+
+	mov	frame_INP(%rsp), INP
+	add	$128, INP
+	cmp	frame_INPEND(%rsp), INP
+	jne	loop0
+
+done_hash:
+
+	# Restore Stack Pointer
+	mov	%rbp, %rsp
+	pop	%rbp
+
+	# Restore GPRs
+	pop	%r15
+	pop	%r14
+	pop	%r13
+	pop	%r12
+	pop	%rbx
+
+	RET
+SYM_FUNC_END(sha512_transform_rorx)
+
+########################################################################
+### Binary Data
+
+
+# Mergeable 640-byte rodata section. This allows linker to merge the table
+# with other, exactly the same 640-byte fragment of another rodata section
+# (if such section exists).
+.section	.rodata.cst640.K512, "aM", @progbits, 640
+.align 64
+# K[t] used in SHA512 hashing
+K512:
+	.quad	0x428a2f98d728ae22,0x7137449123ef65cd
+	.quad	0xb5c0fbcfec4d3b2f,0xe9b5dba58189dbbc
+	.quad	0x3956c25bf348b538,0x59f111f1b605d019
+	.quad	0x923f82a4af194f9b,0xab1c5ed5da6d8118
+	.quad	0xd807aa98a3030242,0x12835b0145706fbe
+	.quad	0x243185be4ee4b28c,0x550c7dc3d5ffb4e2
+	.quad	0x72be5d74f27b896f,0x80deb1fe3b1696b1
+	.quad	0x9bdc06a725c71235,0xc19bf174cf692694
+	.quad	0xe49b69c19ef14ad2,0xefbe4786384f25e3
+	.quad	0x0fc19dc68b8cd5b5,0x240ca1cc77ac9c65
+	.quad	0x2de92c6f592b0275,0x4a7484aa6ea6e483
+	.quad	0x5cb0a9dcbd41fbd4,0x76f988da831153b5
+	.quad	0x983e5152ee66dfab,0xa831c66d2db43210
+	.quad	0xb00327c898fb213f,0xbf597fc7beef0ee4
+	.quad	0xc6e00bf33da88fc2,0xd5a79147930aa725
+	.quad	0x06ca6351e003826f,0x142929670a0e6e70
+	.quad	0x27b70a8546d22ffc,0x2e1b21385c26c926
+	.quad	0x4d2c6dfc5ac42aed,0x53380d139d95b3df
+	.quad	0x650a73548baf63de,0x766a0abb3c77b2a8
+	.quad	0x81c2c92e47edaee6,0x92722c851482353b
+	.quad	0xa2bfe8a14cf10364,0xa81a664bbc423001
+	.quad	0xc24b8b70d0f89791,0xc76c51a30654be30
+	.quad	0xd192e819d6ef5218,0xd69906245565a910
+	.quad	0xf40e35855771202a,0x106aa07032bbd1b8
+	.quad	0x19a4c116b8d2d0c8,0x1e376c085141ab53
+	.quad	0x2748774cdf8eeb99,0x34b0bcb5e19b48a8
+	.quad	0x391c0cb3c5c95a63,0x4ed8aa4ae3418acb
+	.quad	0x5b9cca4f7763e373,0x682e6ff3d6b2b8a3
+	.quad	0x748f82ee5defb2fc,0x78a5636f43172f60
+	.quad	0x84c87814a1f0ab72,0x8cc702081a6439ec
+	.quad	0x90befffa23631e28,0xa4506cebde82bde9
+	.quad	0xbef9a3f7b2c67915,0xc67178f2e372532b
+	.quad	0xca273eceea26619c,0xd186b8c721c0c207
+	.quad	0xeada7dd6cde0eb1e,0xf57d4f7fee6ed178
+	.quad	0x06f067aa72176fba,0x0a637dc5a2c898a6
+	.quad	0x113f9804bef90dae,0x1b710b35131c471b
+	.quad	0x28db77f523047d84,0x32caab7b40c72493
+	.quad	0x3c9ebe0a15c9bebc,0x431d67c49c100d4c
+	.quad	0x4cc5d4becb3e42b6,0x597f299cfc657e2a
+	.quad	0x5fcb6fab3ad6faec,0x6c44198c4a475817
+
+.section	.rodata.cst32.PSHUFFLE_BYTE_FLIP_MASK, "aM", @progbits, 32
+.align 32
+# Mask for byte-swapping a couple of qwords in an XMM register using (v)pshufb.
+PSHUFFLE_BYTE_FLIP_MASK:
+	.octa 0x08090a0b0c0d0e0f0001020304050607
+	.octa 0x18191a1b1c1d1e1f1011121314151617
+
+.section	.rodata.cst32.MASK_YMM_LO, "aM", @progbits, 32
+.align 32
+MASK_YMM_LO:
+	.octa 0x00000000000000000000000000000000
+	.octa 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF