Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

3 files changed, 588 insertions, 0 deletions

diff --git a/arch/x86/platform/ce4100/Makefile b/arch/x86/platform/ce4100/Makefile
new file mode 100644
index 000000000..7b7f37dc8
--- /dev/null
+++ b/arch/x86/platform/ce4100/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_X86_INTEL_CE)	+= ce4100.o
diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c
new file mode 100644
index 000000000..40745664d
--- /dev/null
+++ b/arch/x86/platform/ce4100/ce4100.c
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel CE4100  platform specific setup code
+ *
+ * (C) Copyright 2010 Intel Corporation
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/reboot.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
+
+#include <asm/ce4100.h>
+#include <asm/prom.h>
+#include <asm/setup.h>
+#include <asm/i8259.h>
+#include <asm/io.h>
+#include <asm/io_apic.h>
+#include <asm/emergency-restart.h>
+
+/*
+ * The CE4100 platform has an internal 8051 Microcontroller which is
+ * responsible for signaling to the external Power Management Unit the
+ * intention to reset, reboot or power off the system. This 8051 device has
+ * its command register mapped at I/O port 0xcf9 and the value 0x4 is used
+ * to power off the system.
+ */
+static void ce4100_power_off(void)
+{
+	outb(0x4, 0xcf9);
+}
+
+#ifdef CONFIG_SERIAL_8250
+
+static unsigned int mem_serial_in(struct uart_port *p, int offset)
+{
+	offset = offset << p->regshift;
+	return readl(p->membase + offset);
+}
+
+/*
+ * The UART Tx interrupts are not set under some conditions and therefore serial
+ * transmission hangs. This is a silicon issue and has not been root caused. The
+ * workaround for this silicon issue checks UART_LSR_THRE bit and UART_LSR_TEMT
+ * bit of LSR register in interrupt handler to see whether at least one of these
+ * two bits is set, if so then process the transmit request. If this workaround
+ * is not applied, then the serial transmission may hang. This workaround is for
+ * errata number 9 in Errata - B step.
+*/
+
+static unsigned int ce4100_mem_serial_in(struct uart_port *p, int offset)
+{
+	unsigned int ret, ier, lsr;
+
+	if (offset == UART_IIR) {
+		offset = offset << p->regshift;
+		ret = readl(p->membase + offset);
+		if (ret & UART_IIR_NO_INT) {
+			/* see if the TX interrupt should have really set */
+			ier = mem_serial_in(p, UART_IER);
+			/* see if the UART's XMIT interrupt is enabled */
+			if (ier & UART_IER_THRI) {
+				lsr = mem_serial_in(p, UART_LSR);
+				/* now check to see if the UART should be
+				   generating an interrupt (but isn't) */
+				if (lsr & (UART_LSR_THRE | UART_LSR_TEMT))
+					ret &= ~UART_IIR_NO_INT;
+			}
+		}
+	} else
+		ret =  mem_serial_in(p, offset);
+	return ret;
+}
+
+static void ce4100_mem_serial_out(struct uart_port *p, int offset, int value)
+{
+	offset = offset << p->regshift;
+	writel(value, p->membase + offset);
+}
+
+static void ce4100_serial_fixup(int port, struct uart_port *up,
+	u32 *capabilities)
+{
+#ifdef CONFIG_EARLY_PRINTK
+	/*
+	 * Over ride the legacy port configuration that comes from
+	 * asm/serial.h. Using the ioport driver then switching to the
+	 * PCI memmaped driver hangs the IOAPIC
+	 */
+	if (up->iotype !=  UPIO_MEM32) {
+		up->uartclk  = 14745600;
+		up->mapbase = 0xdffe0200;
+		set_fixmap_nocache(FIX_EARLYCON_MEM_BASE,
+				up->mapbase & PAGE_MASK);
+		up->membase =
+			(void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
+		up->membase += up->mapbase & ~PAGE_MASK;
+		up->mapbase += port * 0x100;
+		up->membase += port * 0x100;
+		up->iotype   = UPIO_MEM32;
+		up->regshift = 2;
+		up->irq = 4;
+	}
+#endif
+	up->iobase = 0;
+	up->serial_in = ce4100_mem_serial_in;
+	up->serial_out = ce4100_mem_serial_out;
+
+	*capabilities |= (1 << 12);
+}
+
+static __init void sdv_serial_fixup(void)
+{
+	serial8250_set_isa_configurator(ce4100_serial_fixup);
+}
+
+#else
+static inline void sdv_serial_fixup(void) {};
+#endif
+
+static void __init sdv_arch_setup(void)
+{
+	sdv_serial_fixup();
+}
+
+static void sdv_pci_init(void)
+{
+	x86_of_pci_init();
+}
+
+/*
+ * CE4100 specific x86_init function overrides and early setup
+ * calls.
+ */
+void __init x86_ce4100_early_setup(void)
+{
+	x86_init.oem.arch_setup = sdv_arch_setup;
+	x86_init.resources.probe_roms = x86_init_noop;
+	x86_init.mpparse.get_smp_config = x86_init_uint_noop;
+	x86_init.mpparse.find_smp_config = x86_init_noop;
+	x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc_nocheck;
+	x86_init.pci.init = ce4100_pci_init;
+	x86_init.pci.init_irq = sdv_pci_init;
+
+	/*
+	 * By default, the reboot method is ACPI which is supported by the
+	 * CE4100 bootloader CEFDK using FADT.ResetReg Address and ResetValue
+	 * the bootloader will however issue a system power off instead of
+	 * reboot. By using BOOT_KBD we ensure proper system reboot as
+	 * expected.
+	 */
+	reboot_type = BOOT_KBD;
+
+	pm_power_off = ce4100_power_off;
+}
diff --git a/arch/x86/platform/ce4100/falconfalls.dts b/arch/x86/platform/ce4100/falconfalls.dts
new file mode 100644
index 000000000..65fa3d866
--- /dev/null
+++ b/arch/x86/platform/ce4100/falconfalls.dts
@@ -0,0 +1,430 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * CE4100 on Falcon Falls
+ *
+ * (c) Copyright 2010 Intel Corporation
+ */
+/dts-v1/;
+/ {
+	model = "intel,falconfalls";
+	compatible = "intel,falconfalls";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "intel,ce4100";
+			reg = <0>;
+			lapic = <&lapic0>;
+		};
+	};
+
+	soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "intel,ce4100-cp";
+		ranges;
+
+		ioapic1: interrupt-controller@fec00000 {
+			#interrupt-cells = <2>;
+			compatible = "intel,ce4100-ioapic";
+			interrupt-controller;
+			reg = <0xfec00000 0x1000>;
+		};
+
+		timer@fed00000 {
+			compatible = "intel,ce4100-hpet";
+			reg = <0xfed00000 0x200>;
+		};
+
+		lapic0: interrupt-controller@fee00000 {
+			compatible = "intel,ce4100-lapic";
+			reg = <0xfee00000 0x1000>;
+		};
+
+		pci@3fc {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			compatible = "intel,ce4100-pci", "pci";
+			device_type = "pci";
+			bus-range = <0 0>;
+			ranges = <0x2000000 0 0xbffff000 0xbffff000 0 0x1000
+				  0x2000000 0 0xdffe0000 0xdffe0000 0 0x1000
+				  0x0000000 0 0x0	 0x0	    0 0x100>;
+
+			/* Secondary IO-APIC */
+			ioapic2: interrupt-controller@0,1 {
+				#interrupt-cells = <2>;
+				compatible = "intel,ce4100-ioapic";
+				interrupt-controller;
+				reg = <0x100 0x0 0x0 0x0 0x0>;
+				assigned-addresses = <0x02000000 0x0 0xbffff000 0x0 0x1000>;
+			};
+
+			pci@1,0 {
+				#address-cells = <3>;
+				#size-cells = <2>;
+				compatible = "intel,ce4100-pci", "pci";
+				device_type = "pci";
+				bus-range = <1 1>;
+				reg = <0x0800 0x0 0x0 0x0 0x0>;
+				ranges = <0x2000000 0 0xdffe0000 0x2000000 0 0xdffe0000 0 0x1000>;
+
+				interrupt-parent = <&ioapic2>;
+
+				display@2,0 {
+					compatible = "pci8086,2e5b.2",
+						   "pci8086,2e5b",
+						   "pciclass038000",
+						   "pciclass0380";
+
+					reg = <0x11000 0x0 0x0 0x0 0x0>;
+					interrupts = <0 1>;
+				};
+
+				multimedia@3,0 {
+					compatible = "pci8086,2e5c.2",
+						   "pci8086,2e5c",
+						   "pciclass048000",
+						   "pciclass0480";
+
+					reg = <0x11800 0x0 0x0 0x0 0x0>;
+					interrupts = <2 1>;
+				};
+
+				multimedia@4,0 {
+					compatible = "pci8086,2e5d.2",
+						   "pci8086,2e5d",
+						   "pciclass048000",
+						   "pciclass0480";
+
+					reg = <0x12000 0x0 0x0 0x0 0x0>;
+					interrupts = <4 1>;
+				};
+
+				multimedia@4,1 {
+					compatible = "pci8086,2e5e.2",
+						   "pci8086,2e5e",
+						   "pciclass048000",
+						   "pciclass0480";
+
+					reg = <0x12100 0x0 0x0 0x0 0x0>;
+					interrupts = <5 1>;
+				};
+
+				sound@6,0 {
+					compatible = "pci8086,2e5f.2",
+						   "pci8086,2e5f",
+						   "pciclass040100",
+						   "pciclass0401";
+
+					reg = <0x13000 0x0 0x0 0x0 0x0>;
+					interrupts = <6 1>;
+				};
+
+				sound@6,1 {
+					compatible = "pci8086,2e5f.2",
+						   "pci8086,2e5f",
+						   "pciclass040100",
+						   "pciclass0401";
+
+					reg = <0x13100 0x0 0x0 0x0 0x0>;
+					interrupts = <7 1>;
+				};
+
+				sound@6,2 {
+					compatible = "pci8086,2e60.2",
+						   "pci8086,2e60",
+						   "pciclass040100",
+						   "pciclass0401";
+
+					reg = <0x13200 0x0 0x0 0x0 0x0>;
+					interrupts = <8 1>;
+				};
+
+				display@8,0 {
+					compatible = "pci8086,2e61.2",
+						   "pci8086,2e61",
+						   "pciclass038000",
+						   "pciclass0380";
+
+					reg = <0x14000 0x0 0x0 0x0 0x0>;
+					interrupts = <9 1>;
+				};
+
+				display@8,1 {
+					compatible = "pci8086,2e62.2",
+						   "pci8086,2e62",
+						   "pciclass038000",
+						   "pciclass0380";
+
+					reg = <0x14100 0x0 0x0 0x0 0x0>;
+					interrupts = <10 1>;
+				};
+
+				multimedia@8,2 {
+					compatible = "pci8086,2e63.2",
+						   "pci8086,2e63",
+						   "pciclass048000",
+						   "pciclass0480";
+
+					reg = <0x14200 0x0 0x0 0x0 0x0>;
+					interrupts = <11 1>;
+				};
+
+				entertainment-encryption@9,0 {
+					compatible = "pci8086,2e64.2",
+						   "pci8086,2e64",
+						   "pciclass101000",
+						   "pciclass1010";
+
+					reg = <0x14800 0x0 0x0 0x0 0x0>;
+					interrupts = <12 1>;
+				};
+
+				localbus@a,0 {
+					compatible = "pci8086,2e65.2",
+						   "pci8086,2e65",
+						   "pciclassff0000",
+						   "pciclassff00";
+
+					reg = <0x15000 0x0 0x0 0x0 0x0>;
+				};
+
+				serial@b,0 {
+					compatible = "pci8086,2e66.2",
+						   "pci8086,2e66",
+						   "pciclass070003",
+						   "pciclass0700";
+
+					reg = <0x15800 0x0 0x0 0x0 0x0>;
+					interrupts = <14 1>;
+				};
+
+				pcigpio: gpio@b,1 {
+					#gpio-cells = <2>;
+					#interrupt-cells = <2>;
+					compatible = "pci8086,2e67.2",
+						   "pci8086,2e67",
+						   "pciclassff0000",
+						   "pciclassff00";
+
+					reg = <0x15900 0x0 0x0 0x0 0x0>;
+					interrupts = <15 1>;
+					interrupt-controller;
+					gpio-controller;
+					intel,muxctl = <0>;
+				};
+
+				i2c-controller@b,2 {
+					#address-cells = <2>;
+					#size-cells = <1>;
+					compatible = "pci8086,2e68.2",
+						   "pci8086,2e68",
+						   "pciclass,ff0000",
+						   "pciclass,ff00";
+
+					reg = <0x15a00 0x0 0x0 0x0 0x0>;
+					interrupts = <16 1>;
+					ranges = <0 0	0x02000000 0 0xdffe0500	0x100
+						  1 0	0x02000000 0 0xdffe0600	0x100
+						  2 0	0x02000000 0 0xdffe0700	0x100>;
+
+					i2c@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						compatible = "intel,ce4100-i2c-controller";
+						reg = <0 0 0x100>;
+					};
+
+					i2c@1 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						compatible = "intel,ce4100-i2c-controller";
+						reg = <1 0 0x100>;
+
+						gpio@26 {
+							#gpio-cells = <2>;
+							compatible = "nxp,pcf8575";
+							reg = <0x26>;
+							gpio-controller;
+						};
+					};
+
+					i2c@2 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						compatible = "intel,ce4100-i2c-controller";
+						reg = <2 0 0x100>;
+
+						gpio@26 {
+							#gpio-cells = <2>;
+							compatible = "nxp,pcf8575";
+							reg = <0x26>;
+							gpio-controller;
+						};
+					};
+				};
+
+				smard-card@b,3 {
+					compatible = "pci8086,2e69.2",
+						   "pci8086,2e69",
+						   "pciclass070500",
+						   "pciclass0705";
+
+					reg = <0x15b00 0x0 0x0 0x0 0x0>;
+					interrupts = <15 1>;
+				};
+
+				spi-controller@b,4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible =
+						"pci8086,2e6a.2",
+						"pci8086,2e6a",
+						"pciclass,ff0000",
+						"pciclass,ff00";
+
+					reg = <0x15c00 0x0 0x0 0x0 0x0>;
+					interrupts = <15 1>;
+
+					dac@0 {
+						compatible = "ti,pcm1755";
+						reg = <0>;
+						spi-max-frequency = <115200>;
+					};
+
+					dac@1 {
+						compatible = "ti,pcm1609a";
+						reg = <1>;
+						spi-max-frequency = <115200>;
+					};
+
+					eeprom@2 {
+						compatible = "atmel,at93c46";
+						reg = <2>;
+						spi-max-frequency = <115200>;
+					};
+				};
+
+				multimedia@b,7 {
+					compatible = "pci8086,2e6d.2",
+						   "pci8086,2e6d",
+						   "pciclassff0000",
+						   "pciclassff00";
+
+					reg = <0x15f00 0x0 0x0 0x0 0x0>;
+				};
+
+				ethernet@c,0 {
+					compatible = "pci8086,2e6e.2",
+						   "pci8086,2e6e",
+						   "pciclass020000",
+						   "pciclass0200";
+
+					reg = <0x16000 0x0 0x0 0x0 0x0>;
+					interrupts = <21 1>;
+				};
+
+				clock@c,1 {
+					compatible = "pci8086,2e6f.2",
+						   "pci8086,2e6f",
+						   "pciclassff0000",
+						   "pciclassff00";
+
+					reg = <0x16100 0x0 0x0 0x0 0x0>;
+					interrupts = <3 1>;
+				};
+
+				usb@d,0 {
+					compatible = "pci8086,2e70.2",
+						   "pci8086,2e70",
+						   "pciclass0c0320",
+						   "pciclass0c03";
+
+					reg = <0x16800 0x0 0x0 0x0 0x0>;
+					interrupts = <22 1>;
+				};
+
+				usb@d,1 {
+					compatible = "pci8086,2e70.2",
+						   "pci8086,2e70",
+						   "pciclass0c0320",
+						   "pciclass0c03";
+
+					reg = <0x16900 0x0 0x0 0x0 0x0>;
+					interrupts = <22 1>;
+				};
+
+				sata@e,0 {
+					compatible = "pci8086,2e71.0",
+						   "pci8086,2e71",
+						   "pciclass010601",
+						   "pciclass0106";
+
+					reg = <0x17000 0x0 0x0 0x0 0x0>;
+					interrupts = <23 1>;
+				};
+
+				flash@f,0 {
+					compatible = "pci8086,701.1",
+						   "pci8086,701",
+						   "pciclass050100",
+						   "pciclass0501";
+
+					reg = <0x17800 0x0 0x0 0x0 0x0>;
+					interrupts = <13 1>;
+				};
+
+				entertainment-encryption@10,0 {
+					compatible = "pci8086,702.1",
+						   "pci8086,702",
+						   "pciclass101000",
+						   "pciclass1010";
+
+					reg = <0x18000 0x0 0x0 0x0 0x0>;
+				};
+
+				co-processor@11,0 {
+					compatible = "pci8086,703.1",
+						   "pci8086,703",
+						   "pciclass0b4000",
+						   "pciclass0b40";
+
+					reg = <0x18800 0x0 0x0 0x0 0x0>;
+					interrupts = <1 1>;
+				};
+
+				multimedia@12,0 {
+					compatible = "pci8086,704.0",
+						   "pci8086,704",
+						   "pciclass048000",
+						   "pciclass0480";
+
+					reg = <0x19000 0x0 0x0 0x0 0x0>;
+				};
+			};
+
+			isa@1f,0 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				compatible = "isa";
+				reg = <0xf800 0x0 0x0 0x0 0x0>;
+				ranges = <1 0 0 0 0 0x100>;
+
+				rtc@70 {
+					compatible = "intel,ce4100-rtc", "motorola,mc146818";
+					interrupts = <8 3>;
+					interrupt-parent = <&ioapic1>;
+					ctrl-reg = <2>;
+					freq-reg = <0x26>;
+					reg = <1 0x70 2>;
+				};
+			};
+		};
+	};
+};