Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 265 insertions, 0 deletions

diff --git a/arch/x86/tools/insn_sanity.c b/arch/x86/tools/insn_sanity.c
new file mode 100644
index 000000000..213f35f94
--- /dev/null
+++ b/arch/x86/tools/insn_sanity.c
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * x86 decoder sanity test - based on test_get_insn.c
+ *
+ * Copyright (C) IBM Corporation, 2009
+ * Copyright (C) Hitachi, Ltd., 2011
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <assert.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <asm/insn.h>
+#include <inat.c>
+#include <insn.c>
+
+/*
+ * Test of instruction analysis against tampering.
+ * Feed random binary to instruction decoder and ensure not to
+ * access out-of-instruction-buffer.
+ */
+
+#define DEFAULT_MAX_ITER	10000
+#define INSN_NOP 0x90
+
+static const char	*prog;		/* Program name */
+static int		verbose;	/* Verbosity */
+static int		x86_64;		/* x86-64 bit mode flag */
+static unsigned int	seed;		/* Random seed */
+static unsigned long	iter_start;	/* Start of iteration number */
+static unsigned long	iter_end = DEFAULT_MAX_ITER;	/* End of iteration number */
+static FILE		*input_file;	/* Input file name */
+
+static void usage(const char *err)
+{
+	if (err)
+		fprintf(stderr, "%s: Error: %s\n\n", prog, err);
+	fprintf(stderr, "Usage: %s [-y|-n|-v] [-s seed[,no]] [-m max] [-i input]\n", prog);
+	fprintf(stderr, "\t-y	64bit mode\n");
+	fprintf(stderr, "\t-n	32bit mode\n");
+	fprintf(stderr, "\t-v	Verbosity(-vv dumps any decoded result)\n");
+	fprintf(stderr, "\t-s	Give a random seed (and iteration number)\n");
+	fprintf(stderr, "\t-m	Give a maximum iteration number\n");
+	fprintf(stderr, "\t-i	Give an input file with decoded binary\n");
+	exit(1);
+}
+
+static void dump_field(FILE *fp, const char *name, const char *indent,
+		       struct insn_field *field)
+{
+	fprintf(fp, "%s.%s = {\n", indent, name);
+	fprintf(fp, "%s\t.value = %d, bytes[] = {%x, %x, %x, %x},\n",
+		indent, field->value, field->bytes[0], field->bytes[1],
+		field->bytes[2], field->bytes[3]);
+	fprintf(fp, "%s\t.got = %d, .nbytes = %d},\n", indent,
+		field->got, field->nbytes);
+}
+
+static void dump_insn(FILE *fp, struct insn *insn)
+{
+	fprintf(fp, "Instruction = {\n");
+	dump_field(fp, "prefixes", "\t",	&insn->prefixes);
+	dump_field(fp, "rex_prefix", "\t",	&insn->rex_prefix);
+	dump_field(fp, "vex_prefix", "\t",	&insn->vex_prefix);
+	dump_field(fp, "opcode", "\t",		&insn->opcode);
+	dump_field(fp, "modrm", "\t",		&insn->modrm);
+	dump_field(fp, "sib", "\t",		&insn->sib);
+	dump_field(fp, "displacement", "\t",	&insn->displacement);
+	dump_field(fp, "immediate1", "\t",	&insn->immediate1);
+	dump_field(fp, "immediate2", "\t",	&insn->immediate2);
+	fprintf(fp, "\t.attr = %x, .opnd_bytes = %d, .addr_bytes = %d,\n",
+		insn->attr, insn->opnd_bytes, insn->addr_bytes);
+	fprintf(fp, "\t.length = %d, .x86_64 = %d, .kaddr = %p}\n",
+		insn->length, insn->x86_64, insn->kaddr);
+}
+
+static void dump_stream(FILE *fp, const char *msg, unsigned long nr_iter,
+			unsigned char *insn_buff, struct insn *insn)
+{
+	int i;
+
+	fprintf(fp, "%s:\n", msg);
+
+	dump_insn(fp, insn);
+
+	fprintf(fp, "You can reproduce this with below command(s);\n");
+
+	/* Input a decoded instruction sequence directly */
+	fprintf(fp, " $ echo ");
+	for (i = 0; i < MAX_INSN_SIZE; i++)
+		fprintf(fp, " %02x", insn_buff[i]);
+	fprintf(fp, " | %s -i -\n", prog);
+
+	if (!input_file) {
+		fprintf(fp, "Or \n");
+		/* Give a seed and iteration number */
+		fprintf(fp, " $ %s -s 0x%x,%lu\n", prog, seed, nr_iter);
+	}
+}
+
+static void init_random_seed(void)
+{
+	int fd;
+
+	fd = open("/dev/urandom", O_RDONLY);
+	if (fd < 0)
+		goto fail;
+
+	if (read(fd, &seed, sizeof(seed)) != sizeof(seed))
+		goto fail;
+
+	close(fd);
+	return;
+fail:
+	usage("Failed to open /dev/urandom");
+}
+
+/* Read given instruction sequence from the input file */
+static int read_next_insn(unsigned char *insn_buff)
+{
+	char buf[256]  = "", *tmp;
+	int i;
+
+	tmp = fgets(buf, ARRAY_SIZE(buf), input_file);
+	if (tmp == NULL || feof(input_file))
+		return 0;
+
+	for (i = 0; i < MAX_INSN_SIZE; i++) {
+		insn_buff[i] = (unsigned char)strtoul(tmp, &tmp, 16);
+		if (*tmp != ' ')
+			break;
+	}
+
+	return i;
+}
+
+static int generate_insn(unsigned char *insn_buff)
+{
+	int i;
+
+	if (input_file)
+		return read_next_insn(insn_buff);
+
+	/* Fills buffer with random binary up to MAX_INSN_SIZE */
+	for (i = 0; i < MAX_INSN_SIZE - 1; i += 2)
+		*(unsigned short *)(&insn_buff[i]) = random() & 0xffff;
+
+	while (i < MAX_INSN_SIZE)
+		insn_buff[i++] = random() & 0xff;
+
+	return i;
+}
+
+static void parse_args(int argc, char **argv)
+{
+	int c;
+	char *tmp = NULL;
+	int set_seed = 0;
+
+	prog = argv[0];
+	while ((c = getopt(argc, argv, "ynvs:m:i:")) != -1) {
+		switch (c) {
+		case 'y':
+			x86_64 = 1;
+			break;
+		case 'n':
+			x86_64 = 0;
+			break;
+		case 'v':
+			verbose++;
+			break;
+		case 'i':
+			if (strcmp("-", optarg) == 0)
+				input_file = stdin;
+			else
+				input_file = fopen(optarg, "r");
+			if (!input_file)
+				usage("Failed to open input file");
+			break;
+		case 's':
+			seed = (unsigned int)strtoul(optarg, &tmp, 0);
+			if (*tmp == ',') {
+				optarg = tmp + 1;
+				iter_start = strtoul(optarg, &tmp, 0);
+			}
+			if (*tmp != '\0' || tmp == optarg)
+				usage("Failed to parse seed");
+			set_seed = 1;
+			break;
+		case 'm':
+			iter_end = strtoul(optarg, &tmp, 0);
+			if (*tmp != '\0' || tmp == optarg)
+				usage("Failed to parse max_iter");
+			break;
+		default:
+			usage(NULL);
+		}
+	}
+
+	/* Check errors */
+	if (iter_end < iter_start)
+		usage("Max iteration number must be bigger than iter-num");
+
+	if (set_seed && input_file)
+		usage("Don't use input file (-i) with random seed (-s)");
+
+	/* Initialize random seed */
+	if (!input_file) {
+		if (!set_seed)	/* No seed is given */
+			init_random_seed();
+		srand(seed);
+	}
+}
+
+int main(int argc, char **argv)
+{
+	int insns = 0, ret;
+	struct insn insn;
+	int errors = 0;
+	unsigned long i;
+	unsigned char insn_buff[MAX_INSN_SIZE * 2];
+
+	parse_args(argc, argv);
+
+	/* Prepare stop bytes with NOPs */
+	memset(insn_buff + MAX_INSN_SIZE, INSN_NOP, MAX_INSN_SIZE);
+
+	for (i = 0; i < iter_end; i++) {
+		if (generate_insn(insn_buff) <= 0)
+			break;
+
+		if (i < iter_start)	/* Skip to given iteration number */
+			continue;
+
+		/* Decode an instruction */
+		ret = insn_decode(&insn, insn_buff, sizeof(insn_buff),
+				  x86_64 ? INSN_MODE_64 : INSN_MODE_32);
+
+		if (insn.next_byte <= insn.kaddr ||
+		    insn.kaddr + MAX_INSN_SIZE < insn.next_byte) {
+			/* Access out-of-range memory */
+			dump_stream(stderr, "Error: Found an access violation", i, insn_buff, &insn);
+			errors++;
+		} else if (verbose && ret < 0)
+			dump_stream(stdout, "Info: Found an undecodable input", i, insn_buff, &insn);
+		else if (verbose >= 2)
+			dump_insn(stdout, &insn);
+		insns++;
+	}
+
+	fprintf((errors) ? stderr : stdout,
+		"%s: %s: decoded and checked %d %s instructions with %d errors (seed:0x%x)\n",
+		prog,
+		(errors) ? "Failure" : "Success",
+		insns,
+		(input_file) ? "given" : "random",
+		errors,
+		seed);
+
+	return errors ? 1 : 0;
+}