Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 224 insertions, 0 deletions

diff --git a/drivers/acpi/acpica/dsinit.c b/drivers/acpi/acpica/dsinit.c
new file mode 100644
index 000000000..dffd54fdb
--- /dev/null
+++ b/drivers/acpi/acpica/dsinit.c
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/******************************************************************************
+ *
+ * Module Name: dsinit - Object initialization namespace walk
+ *
+ * Copyright (C) 2000 - 2022, Intel Corp.
+ *
+ *****************************************************************************/
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acdispat.h"
+#include "acnamesp.h"
+#include "actables.h"
+#include "acinterp.h"
+
+#define _COMPONENT          ACPI_DISPATCHER
+ACPI_MODULE_NAME("dsinit")
+
+/* Local prototypes */
+static acpi_status
+acpi_ds_init_one_object(acpi_handle obj_handle,
+			u32 level, void *context, void **return_value);
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_init_one_object
+ *
+ * PARAMETERS:  obj_handle      - Node for the object
+ *              level           - Current nesting level
+ *              context         - Points to a init info struct
+ *              return_value    - Not used
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Callback from acpi_walk_namespace. Invoked for every object
+ *              within the namespace.
+ *
+ *              Currently, the only objects that require initialization are:
+ *              1) Methods
+ *              2) Operation Regions
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ds_init_one_object(acpi_handle obj_handle,
+			u32 level, void *context, void **return_value)
+{
+	struct acpi_init_walk_info *info =
+	    (struct acpi_init_walk_info *)context;
+	struct acpi_namespace_node *node =
+	    (struct acpi_namespace_node *)obj_handle;
+	acpi_status status;
+	union acpi_operand_object *obj_desc;
+
+	ACPI_FUNCTION_ENTRY();
+
+	/*
+	 * We are only interested in NS nodes owned by the table that
+	 * was just loaded
+	 */
+	if (node->owner_id != info->owner_id) {
+		return (AE_OK);
+	}
+
+	info->object_count++;
+
+	/* And even then, we are only interested in a few object types */
+
+	switch (acpi_ns_get_type(obj_handle)) {
+	case ACPI_TYPE_REGION:
+
+		status = acpi_ds_initialize_region(obj_handle);
+		if (ACPI_FAILURE(status)) {
+			ACPI_EXCEPTION((AE_INFO, status,
+					"During Region initialization %p [%4.4s]",
+					obj_handle,
+					acpi_ut_get_node_name(obj_handle)));
+		}
+
+		info->op_region_count++;
+		break;
+
+	case ACPI_TYPE_METHOD:
+		/*
+		 * Auto-serialization support. We will examine each method that is
+		 * not_serialized to determine if it creates any Named objects. If
+		 * it does, it will be marked serialized to prevent problems if
+		 * the method is entered by two or more threads and an attempt is
+		 * made to create the same named object twice -- which results in
+		 * an AE_ALREADY_EXISTS exception and method abort.
+		 */
+		info->method_count++;
+		obj_desc = acpi_ns_get_attached_object(node);
+		if (!obj_desc) {
+			break;
+		}
+
+		/* Ignore if already serialized */
+
+		if (obj_desc->method.info_flags & ACPI_METHOD_SERIALIZED) {
+			info->serial_method_count++;
+			break;
+		}
+
+		if (acpi_gbl_auto_serialize_methods) {
+
+			/* Parse/scan method and serialize it if necessary */
+
+			acpi_ds_auto_serialize_method(node, obj_desc);
+			if (obj_desc->method.
+			    info_flags & ACPI_METHOD_SERIALIZED) {
+
+				/* Method was just converted to Serialized */
+
+				info->serial_method_count++;
+				info->serialized_method_count++;
+				break;
+			}
+		}
+
+		info->non_serial_method_count++;
+		break;
+
+	case ACPI_TYPE_DEVICE:
+
+		info->device_count++;
+		break;
+
+	default:
+
+		break;
+	}
+
+	/*
+	 * We ignore errors from above, and always return OK, since
+	 * we don't want to abort the walk on a single error.
+	 */
+	return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_initialize_objects
+ *
+ * PARAMETERS:  table_desc      - Descriptor for parent ACPI table
+ *              start_node      - Root of subtree to be initialized.
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Walk the namespace starting at "StartNode" and perform any
+ *              necessary initialization on the objects found therein
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_initialize_objects(u32 table_index,
+			   struct acpi_namespace_node *start_node)
+{
+	acpi_status status;
+	struct acpi_init_walk_info info;
+	struct acpi_table_header *table;
+	acpi_owner_id owner_id;
+
+	ACPI_FUNCTION_TRACE(ds_initialize_objects);
+
+	status = acpi_tb_get_owner_id(table_index, &owner_id);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+			  "**** Starting initialization of namespace objects ****\n"));
+
+	/* Set all init info to zero */
+
+	memset(&info, 0, sizeof(struct acpi_init_walk_info));
+
+	info.owner_id = owner_id;
+	info.table_index = table_index;
+
+	/* Walk entire namespace from the supplied root */
+
+	/*
+	 * We don't use acpi_walk_namespace since we do not want to acquire
+	 * the namespace reader lock.
+	 */
+	status =
+	    acpi_ns_walk_namespace(ACPI_TYPE_ANY, start_node, ACPI_UINT32_MAX,
+				   ACPI_NS_WALK_NO_UNLOCK,
+				   acpi_ds_init_one_object, NULL, &info, NULL);
+	if (ACPI_FAILURE(status)) {
+		ACPI_EXCEPTION((AE_INFO, status, "During WalkNamespace"));
+	}
+
+	status = acpi_get_table_by_index(table_index, &table);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/* DSDT is always the first AML table */
+
+	if (ACPI_COMPARE_NAMESEG(table->signature, ACPI_SIG_DSDT)) {
+		ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
+				      "\nACPI table initialization:\n"));
+	}
+
+	/* Summary of objects initialized */
+
+	ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
+			      "Table [%4.4s: %-8.8s] (id %.2X) - %4u Objects with %3u Devices, "
+			      "%3u Regions, %4u Methods (%u/%u/%u Serial/Non/Cvt)\n",
+			      table->signature, table->oem_table_id, owner_id,
+			      info.object_count, info.device_count,
+			      info.op_region_count, info.method_count,
+			      info.serial_method_count,
+			      info.non_serial_method_count,
+			      info.serialized_method_count));
+
+	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "%u Methods, %u Regions\n",
+			  info.method_count, info.op_region_count));
+
+	return_ACPI_STATUS(AE_OK);
+}