Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 745 insertions, 0 deletions

diff --git a/drivers/acpi/acpica/dswload2.c b/drivers/acpi/acpica/dswload2.c
new file mode 100644
index 000000000..778df616a
--- /dev/null
+++ b/drivers/acpi/acpica/dswload2.c
@@ -0,0 +1,745 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/******************************************************************************
+ *
+ * Module Name: dswload2 - Dispatcher second pass namespace load callbacks
+ *
+ * Copyright (C) 2000 - 2022, Intel Corp.
+ *
+ *****************************************************************************/
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acparser.h"
+#include "amlcode.h"
+#include "acdispat.h"
+#include "acinterp.h"
+#include "acnamesp.h"
+#include "acevents.h"
+#ifdef ACPI_EXEC_APP
+#include "aecommon.h"
+#endif
+
+#define _COMPONENT          ACPI_DISPATCHER
+ACPI_MODULE_NAME("dswload2")
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_load2_begin_op
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *              out_op          - Where to return op if a new one is created
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Descending callback used during the loading of ACPI tables.
+ *
+ ******************************************************************************/
+acpi_status
+acpi_ds_load2_begin_op(struct acpi_walk_state *walk_state,
+		       union acpi_parse_object **out_op)
+{
+	union acpi_parse_object *op;
+	struct acpi_namespace_node *node;
+	acpi_status status;
+	acpi_object_type object_type;
+	char *buffer_ptr;
+	u32 flags;
+
+	ACPI_FUNCTION_TRACE(ds_load2_begin_op);
+
+	op = walk_state->op;
+	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
+			  walk_state));
+
+	if (op) {
+		if ((walk_state->control_state) &&
+		    (walk_state->control_state->common.state ==
+		     ACPI_CONTROL_CONDITIONAL_EXECUTING)) {
+
+			/* We are executing a while loop outside of a method */
+
+			status = acpi_ds_exec_begin_op(walk_state, out_op);
+			return_ACPI_STATUS(status);
+		}
+
+		/* We only care about Namespace opcodes here */
+
+		if ((!(walk_state->op_info->flags & AML_NSOPCODE) &&
+		     (walk_state->opcode != AML_INT_NAMEPATH_OP)) ||
+		    (!(walk_state->op_info->flags & AML_NAMED))) {
+			return_ACPI_STATUS(AE_OK);
+		}
+
+		/* Get the name we are going to enter or lookup in the namespace */
+
+		if (walk_state->opcode == AML_INT_NAMEPATH_OP) {
+
+			/* For Namepath op, get the path string */
+
+			buffer_ptr = op->common.value.string;
+			if (!buffer_ptr) {
+
+				/* No name, just exit */
+
+				return_ACPI_STATUS(AE_OK);
+			}
+		} else {
+			/* Get name from the op */
+
+			buffer_ptr = ACPI_CAST_PTR(char, &op->named.name);
+		}
+	} else {
+		/* Get the namestring from the raw AML */
+
+		buffer_ptr =
+		    acpi_ps_get_next_namestring(&walk_state->parser_state);
+	}
+
+	/* Map the opcode into an internal object type */
+
+	object_type = walk_state->op_info->object_type;
+
+	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+			  "State=%p Op=%p Type=%X\n", walk_state, op,
+			  object_type));
+
+	switch (walk_state->opcode) {
+	case AML_FIELD_OP:
+	case AML_BANK_FIELD_OP:
+	case AML_INDEX_FIELD_OP:
+
+		node = NULL;
+		status = AE_OK;
+		break;
+
+	case AML_INT_NAMEPATH_OP:
+		/*
+		 * The name_path is an object reference to an existing object.
+		 * Don't enter the name into the namespace, but look it up
+		 * for use later.
+		 */
+		status =
+		    acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
+				   object_type, ACPI_IMODE_EXECUTE,
+				   ACPI_NS_SEARCH_PARENT, walk_state, &(node));
+		break;
+
+	case AML_SCOPE_OP:
+
+		/* Special case for Scope(\) -> refers to the Root node */
+
+		if (op && (op->named.node == acpi_gbl_root_node)) {
+			node = op->named.node;
+
+			status =
+			    acpi_ds_scope_stack_push(node, object_type,
+						     walk_state);
+			if (ACPI_FAILURE(status)) {
+				return_ACPI_STATUS(status);
+			}
+		} else {
+			/*
+			 * The Path is an object reference to an existing object.
+			 * Don't enter the name into the namespace, but look it up
+			 * for use later.
+			 */
+			status =
+			    acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
+					   object_type, ACPI_IMODE_EXECUTE,
+					   ACPI_NS_SEARCH_PARENT, walk_state,
+					   &(node));
+			if (ACPI_FAILURE(status)) {
+#ifdef ACPI_ASL_COMPILER
+				if (status == AE_NOT_FOUND) {
+					status = AE_OK;
+				} else {
+					ACPI_ERROR_NAMESPACE(walk_state->
+							     scope_info,
+							     buffer_ptr,
+							     status);
+				}
+#else
+				ACPI_ERROR_NAMESPACE(walk_state->scope_info,
+						     buffer_ptr, status);
+#endif
+				return_ACPI_STATUS(status);
+			}
+		}
+
+		/*
+		 * We must check to make sure that the target is
+		 * one of the opcodes that actually opens a scope
+		 */
+		switch (node->type) {
+		case ACPI_TYPE_ANY:
+		case ACPI_TYPE_LOCAL_SCOPE:	/* Scope */
+		case ACPI_TYPE_DEVICE:
+		case ACPI_TYPE_POWER:
+		case ACPI_TYPE_PROCESSOR:
+		case ACPI_TYPE_THERMAL:
+
+			/* These are acceptable types */
+			break;
+
+		case ACPI_TYPE_INTEGER:
+		case ACPI_TYPE_STRING:
+		case ACPI_TYPE_BUFFER:
+
+			/*
+			 * These types we will allow, but we will change the type.
+			 * This enables some existing code of the form:
+			 *
+			 *  Name (DEB, 0)
+			 *  Scope (DEB) { ... }
+			 */
+			ACPI_WARNING((AE_INFO,
+				      "Type override - [%4.4s] had invalid type (%s) "
+				      "for Scope operator, changed to type ANY",
+				      acpi_ut_get_node_name(node),
+				      acpi_ut_get_type_name(node->type)));
+
+			node->type = ACPI_TYPE_ANY;
+			walk_state->scope_info->common.value = ACPI_TYPE_ANY;
+			break;
+
+		case ACPI_TYPE_METHOD:
+
+			/*
+			 * Allow scope change to root during execution of module-level
+			 * code. Root is typed METHOD during this time.
+			 */
+			if ((node == acpi_gbl_root_node) &&
+			    (walk_state->
+			     parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
+				break;
+			}
+
+			ACPI_FALLTHROUGH;
+
+		default:
+
+			/* All other types are an error */
+
+			ACPI_ERROR((AE_INFO,
+				    "Invalid type (%s) for target of "
+				    "Scope operator [%4.4s] (Cannot override)",
+				    acpi_ut_get_type_name(node->type),
+				    acpi_ut_get_node_name(node)));
+
+			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+		}
+		break;
+
+	default:
+
+		/* All other opcodes */
+
+		if (op && op->common.node) {
+
+			/* This op/node was previously entered into the namespace */
+
+			node = op->common.node;
+
+			if (acpi_ns_opens_scope(object_type)) {
+				status =
+				    acpi_ds_scope_stack_push(node, object_type,
+							     walk_state);
+				if (ACPI_FAILURE(status)) {
+					return_ACPI_STATUS(status);
+				}
+			}
+
+			return_ACPI_STATUS(AE_OK);
+		}
+
+		/*
+		 * Enter the named type into the internal namespace. We enter the name
+		 * as we go downward in the parse tree. Any necessary subobjects that
+		 * involve arguments to the opcode must be created as we go back up the
+		 * parse tree later.
+		 *
+		 * Note: Name may already exist if we are executing a deferred opcode.
+		 */
+		if (walk_state->deferred_node) {
+
+			/* This name is already in the namespace, get the node */
+
+			node = walk_state->deferred_node;
+			status = AE_OK;
+			break;
+		}
+
+		flags = ACPI_NS_NO_UPSEARCH;
+		if (walk_state->pass_number == ACPI_IMODE_EXECUTE) {
+
+			/* Execution mode, node cannot already exist, node is temporary */
+
+			flags |= ACPI_NS_ERROR_IF_FOUND;
+
+			if (!
+			    (walk_state->
+			     parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
+				flags |= ACPI_NS_TEMPORARY;
+			}
+		}
+#ifdef ACPI_ASL_COMPILER
+
+		/*
+		 * Do not open a scope for AML_EXTERNAL_OP
+		 * acpi_ns_lookup can open a new scope based on the object type
+		 * of this op. AML_EXTERNAL_OP is a declaration rather than a
+		 * definition. In the case that this external is a method object,
+		 * acpi_ns_lookup will open a new scope. However, an AML_EXTERNAL_OP
+		 * associated with the ACPI_TYPE_METHOD is a declaration, rather than
+		 * a definition. Flags is set to avoid opening a scope for any
+		 * AML_EXTERNAL_OP.
+		 */
+		if (walk_state->opcode == AML_EXTERNAL_OP) {
+			flags |= ACPI_NS_DONT_OPEN_SCOPE;
+		}
+#endif
+
+		/*
+		 * For name creation opcodes, the full namepath prefix must
+		 * exist, except for the final (new) nameseg.
+		 */
+		if (walk_state->op_info->flags & AML_NAMED) {
+			flags |= ACPI_NS_PREFIX_MUST_EXIST;
+		}
+
+		/* Add new entry or lookup existing entry */
+
+		status =
+		    acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
+				   object_type, ACPI_IMODE_LOAD_PASS2, flags,
+				   walk_state, &node);
+
+		if (ACPI_SUCCESS(status) && (flags & ACPI_NS_TEMPORARY)) {
+			ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+					  "***New Node [%4.4s] %p is temporary\n",
+					  acpi_ut_get_node_name(node), node));
+		}
+		break;
+	}
+
+	if (ACPI_FAILURE(status)) {
+		ACPI_ERROR_NAMESPACE(walk_state->scope_info,
+				     buffer_ptr, status);
+		return_ACPI_STATUS(status);
+	}
+
+	if (!op) {
+
+		/* Create a new op */
+
+		op = acpi_ps_alloc_op(walk_state->opcode, walk_state->aml);
+		if (!op) {
+			return_ACPI_STATUS(AE_NO_MEMORY);
+		}
+
+		/* Initialize the new op */
+
+		if (node) {
+			op->named.name = node->name.integer;
+		}
+		*out_op = op;
+	}
+
+	/*
+	 * Put the Node in the "op" object that the parser uses, so we
+	 * can get it again quickly when this scope is closed
+	 */
+	op->common.node = node;
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_load2_end_op
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Ascending callback used during the loading of the namespace,
+ *              both control methods and everything else.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state)
+{
+	union acpi_parse_object *op;
+	acpi_status status = AE_OK;
+	acpi_object_type object_type;
+	struct acpi_namespace_node *node;
+	union acpi_parse_object *arg;
+	struct acpi_namespace_node *new_node;
+	u32 i;
+	u8 region_space;
+#ifdef ACPI_EXEC_APP
+	union acpi_operand_object *obj_desc;
+	char *namepath;
+#endif
+
+	ACPI_FUNCTION_TRACE(ds_load2_end_op);
+
+	op = walk_state->op;
+	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Opcode [%s] Op %p State %p\n",
+			  walk_state->op_info->name, op, walk_state));
+
+	/* Check if opcode had an associated namespace object */
+
+	if (!(walk_state->op_info->flags & AML_NSOBJECT)) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	if (op->common.aml_opcode == AML_SCOPE_OP) {
+		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+				  "Ending scope Op=%p State=%p\n", op,
+				  walk_state));
+	}
+
+	object_type = walk_state->op_info->object_type;
+
+	/*
+	 * Get the Node/name from the earlier lookup
+	 * (It was saved in the *op structure)
+	 */
+	node = op->common.node;
+
+	/*
+	 * Put the Node on the object stack (Contains the ACPI Name of
+	 * this object)
+	 */
+	walk_state->operands[0] = (void *)node;
+	walk_state->num_operands = 1;
+
+	/* Pop the scope stack */
+
+	if (acpi_ns_opens_scope(object_type) &&
+	    (op->common.aml_opcode != AML_INT_METHODCALL_OP)) {
+		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+				  "(%s) Popping scope for Op %p\n",
+				  acpi_ut_get_type_name(object_type), op));
+
+		status = acpi_ds_scope_stack_pop(walk_state);
+		if (ACPI_FAILURE(status)) {
+			goto cleanup;
+		}
+	}
+
+	/*
+	 * Named operations are as follows:
+	 *
+	 * AML_ALIAS
+	 * AML_BANKFIELD
+	 * AML_CREATEBITFIELD
+	 * AML_CREATEBYTEFIELD
+	 * AML_CREATEDWORDFIELD
+	 * AML_CREATEFIELD
+	 * AML_CREATEQWORDFIELD
+	 * AML_CREATEWORDFIELD
+	 * AML_DATA_REGION
+	 * AML_DEVICE
+	 * AML_EVENT
+	 * AML_FIELD
+	 * AML_INDEXFIELD
+	 * AML_METHOD
+	 * AML_METHODCALL
+	 * AML_MUTEX
+	 * AML_NAME
+	 * AML_NAMEDFIELD
+	 * AML_OPREGION
+	 * AML_POWERRES
+	 * AML_PROCESSOR
+	 * AML_SCOPE
+	 * AML_THERMALZONE
+	 */
+
+	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+			  "Create-Load [%s] State=%p Op=%p NamedObj=%p\n",
+			  acpi_ps_get_opcode_name(op->common.aml_opcode),
+			  walk_state, op, node));
+
+	/* Decode the opcode */
+
+	arg = op->common.value.arg;
+
+	switch (walk_state->op_info->type) {
+
+	case AML_TYPE_CREATE_FIELD:
+		/*
+		 * Create the field object, but the field buffer and index must
+		 * be evaluated later during the execution phase
+		 */
+		status = acpi_ds_create_buffer_field(op, walk_state);
+		if (ACPI_FAILURE(status)) {
+			ACPI_EXCEPTION((AE_INFO, status,
+					"CreateBufferField failure"));
+			goto cleanup;
+			}
+		break;
+
+	case AML_TYPE_NAMED_FIELD:
+		/*
+		 * If we are executing a method, initialize the field
+		 */
+		if (walk_state->method_node) {
+			status = acpi_ds_init_field_objects(op, walk_state);
+		}
+
+		switch (op->common.aml_opcode) {
+		case AML_INDEX_FIELD_OP:
+
+			status =
+			    acpi_ds_create_index_field(op,
+						       (acpi_handle)arg->common.
+						       node, walk_state);
+			break;
+
+		case AML_BANK_FIELD_OP:
+
+			status =
+			    acpi_ds_create_bank_field(op, arg->common.node,
+						      walk_state);
+			break;
+
+		case AML_FIELD_OP:
+
+			status =
+			    acpi_ds_create_field(op, arg->common.node,
+						 walk_state);
+			break;
+
+		default:
+
+			/* All NAMED_FIELD opcodes must be handled above */
+			break;
+		}
+		break;
+
+	case AML_TYPE_NAMED_SIMPLE:
+
+		status = acpi_ds_create_operands(walk_state, arg);
+		if (ACPI_FAILURE(status)) {
+			goto cleanup;
+		}
+
+		switch (op->common.aml_opcode) {
+		case AML_PROCESSOR_OP:
+
+			status = acpi_ex_create_processor(walk_state);
+			break;
+
+		case AML_POWER_RESOURCE_OP:
+
+			status = acpi_ex_create_power_resource(walk_state);
+			break;
+
+		case AML_MUTEX_OP:
+
+			status = acpi_ex_create_mutex(walk_state);
+			break;
+
+		case AML_EVENT_OP:
+
+			status = acpi_ex_create_event(walk_state);
+			break;
+
+		case AML_ALIAS_OP:
+
+			status = acpi_ex_create_alias(walk_state);
+			break;
+
+		default:
+
+			/* Unknown opcode */
+
+			status = AE_OK;
+			goto cleanup;
+		}
+
+		/* Delete operands */
+
+		for (i = 1; i < walk_state->num_operands; i++) {
+			acpi_ut_remove_reference(walk_state->operands[i]);
+			walk_state->operands[i] = NULL;
+		}
+
+		break;
+
+	case AML_TYPE_NAMED_COMPLEX:
+
+		switch (op->common.aml_opcode) {
+		case AML_REGION_OP:
+		case AML_DATA_REGION_OP:
+
+			if (op->common.aml_opcode == AML_REGION_OP) {
+				region_space = (acpi_adr_space_type)
+				    ((op->common.value.arg)->common.value.
+				     integer);
+			} else {
+				region_space = ACPI_ADR_SPACE_DATA_TABLE;
+			}
+
+			/*
+			 * The op_region is not fully parsed at this time. The only valid
+			 * argument is the space_id. (We must save the address of the
+			 * AML of the address and length operands)
+			 *
+			 * If we have a valid region, initialize it. The namespace is
+			 * unlocked at this point.
+			 *
+			 * Need to unlock interpreter if it is locked (if we are running
+			 * a control method), in order to allow _REG methods to be run
+			 * during acpi_ev_initialize_region.
+			 */
+			if (walk_state->method_node) {
+				/*
+				 * Executing a method: initialize the region and unlock
+				 * the interpreter
+				 */
+				status = acpi_ex_create_region(op->named.data,
+							       op->named.length,
+							       region_space,
+							       walk_state);
+				if (ACPI_FAILURE(status)) {
+					return_ACPI_STATUS(status);
+				}
+			}
+
+			status =
+			    acpi_ev_initialize_region
+			    (acpi_ns_get_attached_object(node));
+			break;
+
+		case AML_NAME_OP:
+
+			status = acpi_ds_create_node(walk_state, node, op);
+			if (ACPI_FAILURE(status)) {
+				goto cleanup;
+			}
+#ifdef ACPI_EXEC_APP
+			/*
+			 * acpi_exec support for namespace initialization file (initialize
+			 * Name opcodes in this code.)
+			 */
+			namepath = acpi_ns_get_external_pathname(node);
+			status = ae_lookup_init_file_entry(namepath, &obj_desc);
+			if (ACPI_SUCCESS(status)) {
+
+				/* Detach any existing object, attach new object */
+
+				if (node->object) {
+					acpi_ns_detach_object(node);
+				}
+				acpi_ns_attach_object(node, obj_desc,
+						      obj_desc->common.type);
+			}
+			ACPI_FREE(namepath);
+			status = AE_OK;
+#endif
+			break;
+
+		case AML_METHOD_OP:
+			/*
+			 * method_op pkg_length name_string method_flags term_list
+			 *
+			 * Note: We must create the method node/object pair as soon as we
+			 * see the method declaration. This allows later pass1 parsing
+			 * of invocations of the method (need to know the number of
+			 * arguments.)
+			 */
+			ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+					  "LOADING-Method: State=%p Op=%p NamedObj=%p\n",
+					  walk_state, op, op->named.node));
+
+			if (!acpi_ns_get_attached_object(op->named.node)) {
+				walk_state->operands[0] =
+				    ACPI_CAST_PTR(void, op->named.node);
+				walk_state->num_operands = 1;
+
+				status =
+				    acpi_ds_create_operands(walk_state,
+							    op->common.value.
+							    arg);
+				if (ACPI_SUCCESS(status)) {
+					status =
+					    acpi_ex_create_method(op->named.
+								  data,
+								  op->named.
+								  length,
+								  walk_state);
+				}
+
+				walk_state->operands[0] = NULL;
+				walk_state->num_operands = 0;
+
+				if (ACPI_FAILURE(status)) {
+					return_ACPI_STATUS(status);
+				}
+			}
+			break;
+
+		default:
+
+			/* All NAMED_COMPLEX opcodes must be handled above */
+			break;
+		}
+		break;
+
+	case AML_CLASS_INTERNAL:
+
+		/* case AML_INT_NAMEPATH_OP: */
+		break;
+
+	case AML_CLASS_METHOD_CALL:
+
+		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+				  "RESOLVING-MethodCall: State=%p Op=%p NamedObj=%p\n",
+				  walk_state, op, node));
+
+		/*
+		 * Lookup the method name and save the Node
+		 */
+		status =
+		    acpi_ns_lookup(walk_state->scope_info,
+				   arg->common.value.string, ACPI_TYPE_ANY,
+				   ACPI_IMODE_LOAD_PASS2,
+				   ACPI_NS_SEARCH_PARENT |
+				   ACPI_NS_DONT_OPEN_SCOPE, walk_state,
+				   &(new_node));
+		if (ACPI_SUCCESS(status)) {
+			/*
+			 * Make sure that what we found is indeed a method
+			 * We didn't search for a method on purpose, to see if the name
+			 * would resolve
+			 */
+			if (new_node->type != ACPI_TYPE_METHOD) {
+				status = AE_AML_OPERAND_TYPE;
+			}
+
+			/* We could put the returned object (Node) on the object stack for
+			 * later, but for now, we will put it in the "op" object that the
+			 * parser uses, so we can get it again at the end of this scope
+			 */
+			op->common.node = new_node;
+		} else {
+			ACPI_ERROR_NAMESPACE(walk_state->scope_info,
+					     arg->common.value.string, status);
+		}
+		break;
+
+	default:
+
+		break;
+	}
+
+cleanup:
+
+	/* Remove the Node pushed at the very beginning */
+
+	walk_state->operands[0] = NULL;
+	walk_state->num_operands = 0;
+	return_ACPI_STATUS(status);
+}