Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 294 insertions, 0 deletions

diff --git a/drivers/acpi/acpica/pstree.c b/drivers/acpi/acpica/pstree.c
new file mode 100644
index 000000000..3012a9342
--- /dev/null
+++ b/drivers/acpi/acpica/pstree.c
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/******************************************************************************
+ *
+ * Module Name: pstree - Parser op tree manipulation/traversal/search
+ *
+ * Copyright (C) 2000 - 2022, Intel Corp.
+ *
+ *****************************************************************************/
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acparser.h"
+#include "amlcode.h"
+#include "acconvert.h"
+
+#define _COMPONENT          ACPI_PARSER
+ACPI_MODULE_NAME("pstree")
+
+/* Local prototypes */
+#ifdef ACPI_OBSOLETE_FUNCTIONS
+union acpi_parse_object *acpi_ps_get_child(union acpi_parse_object *op);
+#endif
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ps_get_arg
+ *
+ * PARAMETERS:  op              - Get an argument for this op
+ *              argn            - Nth argument to get
+ *
+ * RETURN:      The argument (as an Op object). NULL if argument does not exist
+ *
+ * DESCRIPTION: Get the specified op's argument.
+ *
+ ******************************************************************************/
+
+union acpi_parse_object *acpi_ps_get_arg(union acpi_parse_object *op, u32 argn)
+{
+	union acpi_parse_object *arg = NULL;
+	const struct acpi_opcode_info *op_info;
+
+	ACPI_FUNCTION_ENTRY();
+
+/*
+	if (Op->Common.aml_opcode == AML_INT_CONNECTION_OP)
+	{
+		return (Op->Common.Value.Arg);
+	}
+*/
+	/* Get the info structure for this opcode */
+
+	op_info = acpi_ps_get_opcode_info(op->common.aml_opcode);
+	if (op_info->class == AML_CLASS_UNKNOWN) {
+
+		/* Invalid opcode or ASCII character */
+
+		return (NULL);
+	}
+
+	/* Check if this opcode requires argument sub-objects */
+
+	if (!(op_info->flags & AML_HAS_ARGS)) {
+
+		/* Has no linked argument objects */
+
+		return (NULL);
+	}
+
+	/* Get the requested argument object */
+
+	arg = op->common.value.arg;
+	while (arg && argn) {
+		argn--;
+		arg = arg->common.next;
+	}
+
+	return (arg);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ps_append_arg
+ *
+ * PARAMETERS:  op              - Append an argument to this Op.
+ *              arg             - Argument Op to append
+ *
+ * RETURN:      None.
+ *
+ * DESCRIPTION: Append an argument to an op's argument list (a NULL arg is OK)
+ *
+ ******************************************************************************/
+
+void
+acpi_ps_append_arg(union acpi_parse_object *op, union acpi_parse_object *arg)
+{
+	union acpi_parse_object *prev_arg;
+	const struct acpi_opcode_info *op_info;
+
+	ACPI_FUNCTION_TRACE(ps_append_arg);
+
+	if (!op) {
+		return_VOID;
+	}
+
+	/* Get the info structure for this opcode */
+
+	op_info = acpi_ps_get_opcode_info(op->common.aml_opcode);
+	if (op_info->class == AML_CLASS_UNKNOWN) {
+
+		/* Invalid opcode */
+
+		ACPI_ERROR((AE_INFO, "Invalid AML Opcode: 0x%2.2X",
+			    op->common.aml_opcode));
+		return_VOID;
+	}
+
+	/* Check if this opcode requires argument sub-objects */
+
+	if (!(op_info->flags & AML_HAS_ARGS)) {
+
+		/* Has no linked argument objects */
+
+		return_VOID;
+	}
+
+	/* Append the argument to the linked argument list */
+
+	if (op->common.value.arg) {
+
+		/* Append to existing argument list */
+
+		prev_arg = op->common.value.arg;
+		while (prev_arg->common.next) {
+			prev_arg = prev_arg->common.next;
+		}
+		prev_arg->common.next = arg;
+	} else {
+		/* No argument list, this will be the first argument */
+
+		op->common.value.arg = arg;
+	}
+
+	/* Set the parent in this arg and any args linked after it */
+
+	while (arg) {
+		arg->common.parent = op;
+		arg = arg->common.next;
+
+		op->common.arg_list_length++;
+	}
+
+	return_VOID;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ps_get_depth_next
+ *
+ * PARAMETERS:  origin          - Root of subtree to search
+ *              op              - Last (previous) Op that was found
+ *
+ * RETURN:      Next Op found in the search.
+ *
+ * DESCRIPTION: Get next op in tree (walking the tree in depth-first order)
+ *              Return NULL when reaching "origin" or when walking up from root
+ *
+ ******************************************************************************/
+
+union acpi_parse_object *acpi_ps_get_depth_next(union acpi_parse_object *origin,
+						union acpi_parse_object *op)
+{
+	union acpi_parse_object *next = NULL;
+	union acpi_parse_object *parent;
+	union acpi_parse_object *arg;
+
+	ACPI_FUNCTION_ENTRY();
+
+	if (!op) {
+		return (NULL);
+	}
+
+	/* Look for an argument or child */
+
+	next = acpi_ps_get_arg(op, 0);
+	if (next) {
+		ASL_CV_LABEL_FILENODE(next);
+		return (next);
+	}
+
+	/* Look for a sibling */
+
+	next = op->common.next;
+	if (next) {
+		ASL_CV_LABEL_FILENODE(next);
+		return (next);
+	}
+
+	/* Look for a sibling of parent */
+
+	parent = op->common.parent;
+
+	while (parent) {
+		arg = acpi_ps_get_arg(parent, 0);
+		while (arg && (arg != origin) && (arg != op)) {
+
+			ASL_CV_LABEL_FILENODE(arg);
+			arg = arg->common.next;
+		}
+
+		if (arg == origin) {
+
+			/* Reached parent of origin, end search */
+
+			return (NULL);
+		}
+
+		if (parent->common.next) {
+
+			/* Found sibling of parent */
+
+			ASL_CV_LABEL_FILENODE(parent->common.next);
+			return (parent->common.next);
+		}
+
+		op = parent;
+		parent = parent->common.parent;
+	}
+
+	ASL_CV_LABEL_FILENODE(next);
+	return (next);
+}
+
+#ifdef ACPI_OBSOLETE_FUNCTIONS
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ps_get_child
+ *
+ * PARAMETERS:  op              - Get the child of this Op
+ *
+ * RETURN:      Child Op, Null if none is found.
+ *
+ * DESCRIPTION: Get op's children or NULL if none
+ *
+ ******************************************************************************/
+
+union acpi_parse_object *acpi_ps_get_child(union acpi_parse_object *op)
+{
+	union acpi_parse_object *child = NULL;
+
+	ACPI_FUNCTION_ENTRY();
+
+	switch (op->common.aml_opcode) {
+	case AML_SCOPE_OP:
+	case AML_ELSE_OP:
+	case AML_DEVICE_OP:
+	case AML_THERMAL_ZONE_OP:
+	case AML_INT_METHODCALL_OP:
+
+		child = acpi_ps_get_arg(op, 0);
+		break;
+
+	case AML_BUFFER_OP:
+	case AML_PACKAGE_OP:
+	case AML_VARIABLE_PACKAGE_OP:
+	case AML_METHOD_OP:
+	case AML_IF_OP:
+	case AML_WHILE_OP:
+	case AML_FIELD_OP:
+
+		child = acpi_ps_get_arg(op, 1);
+		break;
+
+	case AML_POWER_RESOURCE_OP:
+	case AML_INDEX_FIELD_OP:
+
+		child = acpi_ps_get_arg(op, 2);
+		break;
+
+	case AML_PROCESSOR_OP:
+	case AML_BANK_FIELD_OP:
+
+		child = acpi_ps_get_arg(op, 3);
+		break;
+
+	default:
+
+		/* All others have no children */
+
+		break;
+	}
+
+	return (child);
+}
+#endif