Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 243 insertions, 0 deletions

diff --git a/drivers/block/swim_asm.S b/drivers/block/swim_asm.S
new file mode 100644
index 000000000..3d7a2d875
--- /dev/null
+++ b/drivers/block/swim_asm.S
@@ -0,0 +1,243 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * low-level functions for the SWIM floppy controller
+ *
+ * needs assembly language because is very timing dependent
+ * this controller exists only on macintosh 680x0 based
+ *
+ * Copyright (C) 2004,2008 Laurent Vivier <Laurent@lvivier.info>
+ *
+ * based on Alastair Bridgewater SWIM analysis, 2001
+ * based on netBSD IWM driver (c) 1997, 1998 Hauke Fath.
+ *
+ * 2004-08-21 (lv) - Initial implementation
+ * 2008-11-05 (lv) - add get_swim_mode
+ */
+
+	.equ	write_data,	0x0000
+	.equ	write_mark,	0x0200
+	.equ	write_CRC,	0x0400
+	.equ	write_parameter,0x0600
+	.equ	write_phase,	0x0800
+	.equ	write_setup,	0x0a00
+	.equ	write_mode0,	0x0c00
+	.equ	write_mode1,	0x0e00
+	.equ	read_data,	0x1000
+	.equ	read_mark,	0x1200
+	.equ	read_error,	0x1400
+	.equ	read_parameter,	0x1600
+	.equ	read_phase,	0x1800
+	.equ	read_setup,	0x1a00
+	.equ	read_status,	0x1c00
+	.equ	read_handshake,	0x1e00
+
+	.equ	o_side, 0
+	.equ	o_track, 1
+	.equ	o_sector, 2
+	.equ	o_size, 3
+	.equ	o_crc0, 4
+	.equ	o_crc1, 5
+
+	.equ	seek_time, 30000
+	.equ	max_retry, 40
+	.equ	sector_size, 512
+
+	.global swim_read_sector_header
+swim_read_sector_header:
+	link	%a6, #0
+	moveml	%d1-%d5/%a0-%a4,%sp@-
+	movel	%a6@(0x0c), %a4
+	bsr	mfm_read_addrmark
+	moveml	%sp@+, %d1-%d5/%a0-%a4
+	unlk	%a6
+	rts
+
+sector_address_mark:
+	.byte	0xa1, 0xa1, 0xa1, 0xfe
+sector_data_mark:
+	.byte	0xa1, 0xa1, 0xa1, 0xfb
+
+mfm_read_addrmark:
+	movel	%a6@(0x08), %a3
+	lea	%a3@(read_handshake), %a2
+	lea	%a3@(read_mark), %a3
+	moveq	#-1, %d0
+	movew	#seek_time, %d2
+
+wait_header_init:
+	tstb	%a3@(read_error - read_mark)
+	moveb	#0x18, %a3@(write_mode0 - read_mark)
+	moveb	#0x01, %a3@(write_mode1 - read_mark)
+	moveb	#0x01, %a3@(write_mode0 - read_mark)
+	tstb	%a3@(read_error - read_mark)
+	moveb	#0x08, %a3@(write_mode1 - read_mark)
+
+	lea	sector_address_mark, %a0
+	moveq	#3, %d1
+
+wait_addr_mark_byte:
+
+	tstb	%a2@
+	dbmi	%d2, wait_addr_mark_byte
+	bpl	header_exit
+
+	moveb	%a3@, %d3
+	cmpb	%a0@+, %d3
+	dbne	%d1, wait_addr_mark_byte
+	bne	wait_header_init
+
+	moveq	#max_retry, %d2
+
+amark0:	tstb	%a2@
+	dbmi	%d2, amark0
+	bpl	signal_nonyb
+
+	moveb	%a3@, %a4@(o_track)
+
+	moveq	#max_retry, %d2
+
+amark1:	tstb	%a2@
+	dbmi	%d2, amark1
+	bpl	signal_nonyb
+
+	moveb	%a3@, %a4@(o_side)
+
+	moveq	#max_retry, %d2
+
+amark2:	tstb	%a2@
+	dbmi	%d2, amark2
+	bpl	signal_nonyb
+
+	moveb	%a3@, %a4@(o_sector)
+
+	moveq	#max_retry, %d2
+
+amark3:	tstb	%a2@
+	dbmi	%d2, amark3
+	bpl	signal_nonyb
+
+	moveb	%a3@, %a4@(o_size)
+
+	moveq	#max_retry, %d2
+
+crc0:	tstb	%a2@
+	dbmi	%d2, crc0
+	bpl	signal_nonyb
+
+	moveb	%a3@, %a4@(o_crc0)
+
+	moveq	#max_retry, %d2
+
+crc1:	tstb	%a2@
+	dbmi	%d2, crc1
+	bpl	signal_nonyb
+
+	moveb	%a3@, %a4@(o_crc1)
+
+	tstb	%a3@(read_error - read_mark)
+
+header_exit:
+	moveq	#0, %d0
+	moveb	#0x18, %a3@(write_mode0 - read_mark)
+	rts
+signal_nonyb:
+	moveq	#-1, %d0
+	moveb	#0x18, %a3@(write_mode0 - read_mark)
+	rts
+
+	.global swim_read_sector_data
+swim_read_sector_data:
+	link	%a6, #0
+	moveml	%d1-%d5/%a0-%a5,%sp@-
+	movel	%a6@(0x0c), %a4
+	bsr	mfm_read_data
+	moveml	%sp@+, %d1-%d5/%a0-%a5
+	unlk	%a6
+	rts
+
+mfm_read_data:
+	movel	%a6@(0x08), %a3
+	lea	%a3@(read_handshake), %a2
+	lea	%a3@(read_data), %a5
+	lea	%a3@(read_mark), %a3
+	movew	#seek_time, %d2
+
+wait_data_init:
+	tstb	%a3@(read_error - read_mark)
+	moveb	#0x18, %a3@(write_mode0 - read_mark)
+	moveb	#0x01, %a3@(write_mode1 - read_mark)
+	moveb	#0x01, %a3@(write_mode0 - read_mark)
+	tstb	%a3@(read_error - read_mark)
+	moveb	#0x08, %a3@(write_mode1 - read_mark)
+
+	lea	sector_data_mark, %a0
+	moveq	#3, %d1
+
+	/* wait data address mark */
+
+wait_data_mark_byte:
+
+	tstb	%a2@
+	dbmi	%d2, wait_data_mark_byte
+	bpl	data_exit
+
+	moveb	%a3@, %d3
+	cmpb	%a0@+, %d3
+	dbne	%d1, wait_data_mark_byte
+	bne	wait_data_init
+
+	/* read data */
+
+	tstb	%a3@(read_error - read_mark)
+
+	movel	#sector_size-1, %d4		/* sector size */
+read_new_data:
+	movew	#max_retry, %d2
+read_data_loop:
+	moveb	%a2@, %d5
+	andb	#0xc0, %d5
+	dbne	%d2, read_data_loop
+	beq	data_exit
+	moveb	%a5@, %a4@+
+	andb	#0x40, %d5
+	dbne	%d4, read_new_data
+	beq	exit_loop
+	moveb	%a5@, %a4@+
+	dbra	%d4, read_new_data
+exit_loop:
+
+	/* read CRC */
+
+	movew	#max_retry, %d2
+data_crc0:
+
+	tstb	%a2@
+	dbmi	%d2, data_crc0
+	bpl	data_exit
+
+	moveb	%a3@, %d5
+
+	moveq	#max_retry, %d2
+
+data_crc1:
+
+	tstb	%a2@
+	dbmi	%d2, data_crc1
+	bpl	data_exit
+
+	moveb	%a3@, %d5
+
+	tstb	%a3@(read_error - read_mark)
+
+	moveb	#0x18, %a3@(write_mode0 - read_mark)
+
+	/* return number of bytes read */
+
+	movel	#sector_size, %d0
+	addw	#1, %d4
+	subl	%d4, %d0
+	rts
+data_exit:
+	moveb	#0x18, %a3@(write_mode0 - read_mark)
+	moveq	#-1, %d0
+	rts