Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 168 insertions, 0 deletions

diff --git a/drivers/clk/meson/axg.h b/drivers/clk/meson/axg.h
new file mode 100644
index 000000000..23ea87964
--- /dev/null
+++ b/drivers/clk/meson/axg.h
@@ -0,0 +1,168 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2016 AmLogic, Inc.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2017 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ *
+ */
+#ifndef __AXG_H
+#define __AXG_H
+
+/*
+ * Clock controller register offsets
+ *
+ * Register offsets from the data sheet must be multiplied by 4 before
+ * adding them to the base address to get the right value.
+ */
+#define HHI_GP0_PLL_CNTL		0x40
+#define HHI_GP0_PLL_CNTL2		0x44
+#define HHI_GP0_PLL_CNTL3		0x48
+#define HHI_GP0_PLL_CNTL4		0x4c
+#define HHI_GP0_PLL_CNTL5		0x50
+#define HHI_GP0_PLL_STS			0x54
+#define HHI_GP0_PLL_CNTL1		0x58
+#define HHI_HIFI_PLL_CNTL		0x80
+#define HHI_HIFI_PLL_CNTL2		0x84
+#define HHI_HIFI_PLL_CNTL3		0x88
+#define HHI_HIFI_PLL_CNTL4		0x8C
+#define HHI_HIFI_PLL_CNTL5		0x90
+#define HHI_HIFI_PLL_STS		0x94
+#define HHI_HIFI_PLL_CNTL1		0x98
+
+#define HHI_XTAL_DIVN_CNTL		0xbc
+#define HHI_GCLK2_MPEG0			0xc0
+#define HHI_GCLK2_MPEG1			0xc4
+#define HHI_GCLK2_MPEG2			0xc8
+#define HHI_GCLK2_OTHER			0xd0
+#define HHI_GCLK2_AO			0xd4
+#define HHI_PCIE_PLL_CNTL		0xd8
+#define HHI_PCIE_PLL_CNTL1		0xdC
+#define HHI_PCIE_PLL_CNTL2		0xe0
+#define HHI_PCIE_PLL_CNTL3		0xe4
+#define HHI_PCIE_PLL_CNTL4		0xe8
+#define HHI_PCIE_PLL_CNTL5		0xec
+#define HHI_PCIE_PLL_CNTL6		0xf0
+#define HHI_PCIE_PLL_STS		0xf4
+
+#define HHI_MEM_PD_REG0			0x100
+#define HHI_VPU_MEM_PD_REG0		0x104
+#define HHI_VIID_CLK_DIV		0x128
+#define HHI_VIID_CLK_CNTL		0x12c
+
+#define HHI_GCLK_MPEG0			0x140
+#define HHI_GCLK_MPEG1			0x144
+#define HHI_GCLK_MPEG2			0x148
+#define HHI_GCLK_OTHER			0x150
+#define HHI_GCLK_AO			0x154
+#define HHI_SYS_CPU_CLK_CNTL1		0x15c
+#define HHI_SYS_CPU_RESET_CNTL		0x160
+#define HHI_VID_CLK_DIV			0x164
+#define HHI_SPICC_HCLK_CNTL		0x168
+
+#define HHI_MPEG_CLK_CNTL		0x174
+#define HHI_VID_CLK_CNTL		0x17c
+#define HHI_TS_CLK_CNTL			0x190
+#define HHI_VID_CLK_CNTL2		0x194
+#define HHI_SYS_CPU_CLK_CNTL0		0x19c
+#define HHI_VID_PLL_CLK_DIV		0x1a0
+#define HHI_VPU_CLK_CNTL		0x1bC
+
+#define HHI_VAPBCLK_CNTL		0x1F4
+
+#define HHI_GEN_CLK_CNTL		0x228
+
+#define HHI_VDIN_MEAS_CLK_CNTL		0x250
+#define HHI_NAND_CLK_CNTL		0x25C
+#define HHI_SD_EMMC_CLK_CNTL		0x264
+
+#define HHI_MPLL_CNTL			0x280
+#define HHI_MPLL_CNTL2			0x284
+#define HHI_MPLL_CNTL3			0x288
+#define HHI_MPLL_CNTL4			0x28C
+#define HHI_MPLL_CNTL5			0x290
+#define HHI_MPLL_CNTL6			0x294
+#define HHI_MPLL_CNTL7			0x298
+#define HHI_MPLL_CNTL8			0x29C
+#define HHI_MPLL_CNTL9			0x2A0
+#define HHI_MPLL_CNTL10			0x2A4
+
+#define HHI_MPLL3_CNTL0			0x2E0
+#define HHI_MPLL3_CNTL1			0x2E4
+#define HHI_PLL_TOP_MISC		0x2E8
+
+#define HHI_SYS_PLL_CNTL1		0x2FC
+#define HHI_SYS_PLL_CNTL		0x300
+#define HHI_SYS_PLL_CNTL2		0x304
+#define HHI_SYS_PLL_CNTL3		0x308
+#define HHI_SYS_PLL_CNTL4		0x30c
+#define HHI_SYS_PLL_CNTL5		0x310
+#define HHI_SYS_PLL_STS			0x314
+#define HHI_DPLL_TOP_I			0x318
+#define HHI_DPLL_TOP2_I			0x31C
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_MPEG_SEL				8
+#define CLKID_MPEG_DIV				9
+#define CLKID_SD_EMMC_B_CLK0_SEL		61
+#define CLKID_SD_EMMC_B_CLK0_DIV		62
+#define CLKID_SD_EMMC_C_CLK0_SEL		63
+#define CLKID_SD_EMMC_C_CLK0_DIV		64
+#define CLKID_MPLL0_DIV				65
+#define CLKID_MPLL1_DIV				66
+#define CLKID_MPLL2_DIV				67
+#define CLKID_MPLL3_DIV				68
+#define CLKID_MPLL_PREDIV			70
+#define CLKID_FCLK_DIV2_DIV			71
+#define CLKID_FCLK_DIV3_DIV			72
+#define CLKID_FCLK_DIV4_DIV			73
+#define CLKID_FCLK_DIV5_DIV			74
+#define CLKID_FCLK_DIV7_DIV			75
+#define CLKID_PCIE_PLL				76
+#define CLKID_PCIE_MUX				77
+#define CLKID_PCIE_REF				78
+#define CLKID_GEN_CLK_SEL			82
+#define CLKID_GEN_CLK_DIV			83
+#define CLKID_SYS_PLL_DCO			85
+#define CLKID_FIXED_PLL_DCO			86
+#define CLKID_GP0_PLL_DCO			87
+#define CLKID_HIFI_PLL_DCO			88
+#define CLKID_PCIE_PLL_DCO			89
+#define CLKID_PCIE_PLL_OD			90
+#define CLKID_VPU_0_DIV				91
+#define CLKID_VPU_1_DIV				94
+#define CLKID_VAPB_0_DIV			98
+#define CLKID_VAPB_1_DIV			101
+#define CLKID_VCLK_SEL				108
+#define CLKID_VCLK2_SEL				109
+#define CLKID_VCLK_INPUT			110
+#define CLKID_VCLK2_INPUT			111
+#define CLKID_VCLK_DIV				112
+#define CLKID_VCLK2_DIV				113
+#define CLKID_VCLK_DIV2_EN			114
+#define CLKID_VCLK_DIV4_EN			115
+#define CLKID_VCLK_DIV6_EN			116
+#define CLKID_VCLK_DIV12_EN			117
+#define CLKID_VCLK2_DIV2_EN			118
+#define CLKID_VCLK2_DIV4_EN			119
+#define CLKID_VCLK2_DIV6_EN			120
+#define CLKID_VCLK2_DIV12_EN			121
+#define CLKID_CTS_ENCL_SEL			132
+#define CLKID_VDIN_MEAS_SEL			134
+#define CLKID_VDIN_MEAS_DIV			135
+
+#define NR_CLKS					137
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/axg-clkc.h>
+
+#endif /* __AXG_H */