Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 310 insertions, 0 deletions

diff --git a/drivers/clk/ti/clk-33xx.c b/drivers/clk/ti/clk-33xx.c
new file mode 100644
index 000000000..85c50ea39
--- /dev/null
+++ b/drivers/clk/ti/clk-33xx.c
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AM33XX Clock init
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc
+ *     Tero Kristo (t-kristo@ti.com)
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/ti.h>
+#include <dt-bindings/clock/am3.h>
+
+#include "clock.h"
+
+static const char * const am3_gpio1_dbclk_parents[] __initconst = {
+	"clk-24mhz-clkctrl:0000:0",
+	NULL,
+};
+
+static const struct omap_clkctrl_bit_data am3_gpio2_bit_data[] __initconst = {
+	{ 18, TI_CLK_GATE, am3_gpio1_dbclk_parents, NULL },
+	{ 0 },
+};
+
+static const struct omap_clkctrl_bit_data am3_gpio3_bit_data[] __initconst = {
+	{ 18, TI_CLK_GATE, am3_gpio1_dbclk_parents, NULL },
+	{ 0 },
+};
+
+static const struct omap_clkctrl_bit_data am3_gpio4_bit_data[] __initconst = {
+	{ 18, TI_CLK_GATE, am3_gpio1_dbclk_parents, NULL },
+	{ 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_l4ls_clkctrl_regs[] __initconst = {
+	{ AM3_L4LS_UART6_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+	{ AM3_L4LS_MMC1_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk" },
+	{ AM3_L4LS_ELM_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+	{ AM3_L4LS_I2C3_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+	{ AM3_L4LS_I2C2_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+	{ AM3_L4LS_SPI0_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+	{ AM3_L4LS_SPI1_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+	{ AM3_L4LS_L4_LS_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+	{ AM3_L4LS_UART2_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+	{ AM3_L4LS_UART3_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+	{ AM3_L4LS_UART4_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+	{ AM3_L4LS_UART5_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
+	{ AM3_L4LS_TIMER7_CLKCTRL, NULL, CLKF_SW_SUP, "timer7_fck" },
+	{ AM3_L4LS_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "timer2_fck" },
+	{ AM3_L4LS_TIMER3_CLKCTRL, NULL, CLKF_SW_SUP, "timer3_fck" },
+	{ AM3_L4LS_TIMER4_CLKCTRL, NULL, CLKF_SW_SUP, "timer4_fck" },
+	{ AM3_L4LS_RNG_CLKCTRL, NULL, CLKF_SW_SUP, "rng_fck" },
+	{ AM3_L4LS_GPIO2_CLKCTRL, am3_gpio2_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
+	{ AM3_L4LS_GPIO3_CLKCTRL, am3_gpio3_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
+	{ AM3_L4LS_GPIO4_CLKCTRL, am3_gpio4_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
+	{ AM3_L4LS_D_CAN0_CLKCTRL, NULL, CLKF_SW_SUP, "dcan0_fck" },
+	{ AM3_L4LS_D_CAN1_CLKCTRL, NULL, CLKF_SW_SUP, "dcan1_fck" },
+	{ AM3_L4LS_EPWMSS1_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+	{ AM3_L4LS_EPWMSS0_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+	{ AM3_L4LS_EPWMSS2_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+	{ AM3_L4LS_TIMER5_CLKCTRL, NULL, CLKF_SW_SUP, "timer5_fck" },
+	{ AM3_L4LS_TIMER6_CLKCTRL, NULL, CLKF_SW_SUP, "timer6_fck" },
+	{ AM3_L4LS_MMC2_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk" },
+	{ AM3_L4LS_SPINLOCK_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+	{ AM3_L4LS_MAILBOX_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+	{ AM3_L4LS_OCPWP_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
+	{ 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_l3s_clkctrl_regs[] __initconst = {
+	{ AM3_L3S_USB_OTG_HS_CLKCTRL, NULL, CLKF_SW_SUP, "usbotg_fck" },
+	{ AM3_L3S_GPMC_CLKCTRL, NULL, CLKF_SW_SUP, "l3s_gclk" },
+	{ AM3_L3S_MCASP0_CLKCTRL, NULL, CLKF_SW_SUP, "mcasp0_fck" },
+	{ AM3_L3S_MCASP1_CLKCTRL, NULL, CLKF_SW_SUP, "mcasp1_fck" },
+	{ AM3_L3S_MMC3_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk" },
+	{ 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_l3_clkctrl_regs[] __initconst = {
+	{ AM3_L3_TPTC0_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+	{ AM3_L3_EMIF_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_ddr_m2_div2_ck" },
+	{ AM3_L3_OCMCRAM_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+	{ AM3_L3_AES_CLKCTRL, NULL, CLKF_SW_SUP, "aes0_fck" },
+	{ AM3_L3_SHAM_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+	{ AM3_L3_TPCC_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+	{ AM3_L3_L3_INSTR_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+	{ AM3_L3_L3_MAIN_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+	{ AM3_L3_TPTC1_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+	{ AM3_L3_TPTC2_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk" },
+	{ 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_l4hs_clkctrl_regs[] __initconst = {
+	{ AM3_L4HS_L4_HS_CLKCTRL, NULL, CLKF_SW_SUP, "l4hs_gclk" },
+	{ 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_pruss_ocp_clkctrl_regs[] __initconst = {
+	{ AM3_PRUSS_OCP_PRUSS_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_NO_IDLEST, "pruss_ocp_gclk" },
+	{ 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_cpsw_125mhz_clkctrl_regs[] __initconst = {
+	{ AM3_CPSW_125MHZ_CPGMAC0_CLKCTRL, NULL, CLKF_SW_SUP, "cpsw_125mhz_gclk" },
+	{ 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_lcdc_clkctrl_regs[] __initconst = {
+	{ AM3_LCDC_LCDC_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_SET_RATE_PARENT, "lcd_gclk" },
+	{ 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_clk_24mhz_clkctrl_regs[] __initconst = {
+	{ AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL, NULL, CLKF_SW_SUP, "clkdiv32k_ck" },
+	{ 0 },
+};
+
+static const char * const am3_gpio0_dbclk_parents[] __initconst = {
+	"gpio0_dbclk_mux_ck",
+	NULL,
+};
+
+static const struct omap_clkctrl_bit_data am3_gpio1_bit_data[] __initconst = {
+	{ 18, TI_CLK_GATE, am3_gpio0_dbclk_parents, NULL },
+	{ 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_l4_wkup_clkctrl_regs[] __initconst = {
+	{ AM3_L4_WKUP_CONTROL_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_core_m4_div2_ck" },
+	{ AM3_L4_WKUP_GPIO1_CLKCTRL, am3_gpio1_bit_data, CLKF_SW_SUP, "dpll_core_m4_div2_ck" },
+	{ AM3_L4_WKUP_L4_WKUP_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_core_m4_div2_ck" },
+	{ AM3_L4_WKUP_UART1_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_wkupdm_ck" },
+	{ AM3_L4_WKUP_I2C1_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_wkupdm_ck" },
+	{ AM3_L4_WKUP_ADC_TSC_CLKCTRL, NULL, CLKF_SW_SUP, "adc_tsc_fck" },
+	{ AM3_L4_WKUP_SMARTREFLEX0_CLKCTRL, NULL, CLKF_SW_SUP, "smartreflex0_fck" },
+	{ AM3_L4_WKUP_TIMER1_CLKCTRL, NULL, CLKF_SW_SUP, "timer1_fck" },
+	{ AM3_L4_WKUP_SMARTREFLEX1_CLKCTRL, NULL, CLKF_SW_SUP, "smartreflex1_fck" },
+	{ AM3_L4_WKUP_WD_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "wdt1_fck" },
+	{ 0 },
+};
+
+static const char * const am3_dbg_sysclk_ck_parents[] __initconst = {
+	"sys_clkin_ck",
+	NULL,
+};
+
+static const char * const am3_trace_pmd_clk_mux_ck_parents[] __initconst = {
+	"l3-aon-clkctrl:0000:19",
+	"l3-aon-clkctrl:0000:30",
+	NULL,
+};
+
+static const char * const am3_trace_clk_div_ck_parents[] __initconst = {
+	"l3-aon-clkctrl:0000:20",
+	NULL,
+};
+
+static const struct omap_clkctrl_div_data am3_trace_clk_div_ck_data __initconst = {
+	.max_div = 64,
+	.flags = CLK_DIVIDER_POWER_OF_TWO,
+};
+
+static const char * const am3_stm_clk_div_ck_parents[] __initconst = {
+	"l3-aon-clkctrl:0000:22",
+	NULL,
+};
+
+static const struct omap_clkctrl_div_data am3_stm_clk_div_ck_data __initconst = {
+	.max_div = 64,
+	.flags = CLK_DIVIDER_POWER_OF_TWO,
+};
+
+static const char * const am3_dbg_clka_ck_parents[] __initconst = {
+	"dpll_core_m4_ck",
+	NULL,
+};
+
+static const struct omap_clkctrl_bit_data am3_debugss_bit_data[] __initconst = {
+	{ 19, TI_CLK_GATE, am3_dbg_sysclk_ck_parents, NULL },
+	{ 20, TI_CLK_MUX, am3_trace_pmd_clk_mux_ck_parents, NULL },
+	{ 22, TI_CLK_MUX, am3_trace_pmd_clk_mux_ck_parents, NULL },
+	{ 24, TI_CLK_DIVIDER, am3_trace_clk_div_ck_parents, &am3_trace_clk_div_ck_data },
+	{ 27, TI_CLK_DIVIDER, am3_stm_clk_div_ck_parents, &am3_stm_clk_div_ck_data },
+	{ 30, TI_CLK_GATE, am3_dbg_clka_ck_parents, NULL },
+	{ 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_l3_aon_clkctrl_regs[] __initconst = {
+	{ AM3_L3_AON_DEBUGSS_CLKCTRL, am3_debugss_bit_data, CLKF_SW_SUP, "l3-aon-clkctrl:0000:24" },
+	{ 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_l4_wkup_aon_clkctrl_regs[] __initconst = {
+	{ AM3_L4_WKUP_AON_WKUP_M3_CLKCTRL, NULL, CLKF_NO_IDLEST, "dpll_core_m4_div2_ck" },
+	{ 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_mpu_clkctrl_regs[] __initconst = {
+	{ AM3_MPU_MPU_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_mpu_m2_ck" },
+	{ 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_l4_rtc_clkctrl_regs[] __initconst = {
+	{ AM3_L4_RTC_RTC_CLKCTRL, NULL, CLKF_SW_SUP, "clk-24mhz-clkctrl:0000:0" },
+	{ 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_gfx_l3_clkctrl_regs[] __initconst = {
+	{ AM3_GFX_L3_GFX_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_NO_IDLEST, "gfx_fck_div_ck" },
+	{ 0 },
+};
+
+static const struct omap_clkctrl_reg_data am3_l4_cefuse_clkctrl_regs[] __initconst = {
+	{ AM3_L4_CEFUSE_CEFUSE_CLKCTRL, NULL, CLKF_SW_SUP, "sys_clkin_ck" },
+	{ 0 },
+};
+
+const struct omap_clkctrl_data am3_clkctrl_data[] __initconst = {
+	{ 0x44e00038, am3_l4ls_clkctrl_regs },
+	{ 0x44e0001c, am3_l3s_clkctrl_regs },
+	{ 0x44e00024, am3_l3_clkctrl_regs },
+	{ 0x44e00120, am3_l4hs_clkctrl_regs },
+	{ 0x44e000e8, am3_pruss_ocp_clkctrl_regs },
+	{ 0x44e00000, am3_cpsw_125mhz_clkctrl_regs },
+	{ 0x44e00018, am3_lcdc_clkctrl_regs },
+	{ 0x44e0014c, am3_clk_24mhz_clkctrl_regs },
+	{ 0x44e00400, am3_l4_wkup_clkctrl_regs },
+	{ 0x44e00414, am3_l3_aon_clkctrl_regs },
+	{ 0x44e004b0, am3_l4_wkup_aon_clkctrl_regs },
+	{ 0x44e00600, am3_mpu_clkctrl_regs },
+	{ 0x44e00800, am3_l4_rtc_clkctrl_regs },
+	{ 0x44e00900, am3_gfx_l3_clkctrl_regs },
+	{ 0x44e00a00, am3_l4_cefuse_clkctrl_regs },
+	{ 0 },
+};
+
+static struct ti_dt_clk am33xx_clks[] = {
+	DT_CLK(NULL, "timer_32k_ck", "clk-24mhz-clkctrl:0000:0"),
+	DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),
+	DT_CLK(NULL, "clkdiv32k_ick", "clk-24mhz-clkctrl:0000:0"),
+	DT_CLK(NULL, "dbg_clka_ck", "l3-aon-clkctrl:0000:30"),
+	DT_CLK(NULL, "dbg_sysclk_ck", "l3-aon-clkctrl:0000:19"),
+	DT_CLK(NULL, "gpio0_dbclk", "l4-wkup-clkctrl:0008:18"),
+	DT_CLK(NULL, "gpio1_dbclk", "l4ls-clkctrl:0074:18"),
+	DT_CLK(NULL, "gpio2_dbclk", "l4ls-clkctrl:0078:18"),
+	DT_CLK(NULL, "gpio3_dbclk", "l4ls-clkctrl:007c:18"),
+	DT_CLK(NULL, "stm_clk_div_ck", "l3-aon-clkctrl:0000:27"),
+	DT_CLK(NULL, "stm_pmd_clock_mux_ck", "l3-aon-clkctrl:0000:22"),
+	DT_CLK(NULL, "trace_clk_div_ck", "l3-aon-clkctrl:0000:24"),
+	DT_CLK(NULL, "trace_pmd_clk_mux_ck", "l3-aon-clkctrl:0000:20"),
+	{ .node_name = NULL },
+};
+
+static const char *enable_init_clks[] = {
+	"dpll_ddr_m2_ck",
+	"dpll_mpu_m2_ck",
+	"l3_gclk",
+	/* AM3_L3_L3_MAIN_CLKCTRL, needed during suspend */
+	"l3-clkctrl:00bc:0",
+	"l4hs_gclk",
+	"l4fw_gclk",
+	"l4ls_gclk",
+	/* Required for external peripherals like, Audio codecs */
+	"clkout2_ck",
+};
+
+int __init am33xx_dt_clk_init(void)
+{
+	struct clk *clk1, *clk2;
+
+	ti_dt_clocks_register(am33xx_clks);
+
+	omap2_clk_disable_autoidle_all();
+
+	ti_clk_add_aliases();
+
+	omap2_clk_enable_init_clocks(enable_init_clks,
+				     ARRAY_SIZE(enable_init_clks));
+
+	/* TRM ERRATA: Timer 3 & 6 default parent (TCLKIN) may not be always
+	 *    physically present, in such a case HWMOD enabling of
+	 *    clock would be failure with default parent. And timer
+	 *    probe thinks clock is already enabled, this leads to
+	 *    crash upon accessing timer 3 & 6 registers in probe.
+	 *    Fix by setting parent of both these timers to master
+	 *    oscillator clock.
+	 */
+
+	clk1 = clk_get_sys(NULL, "sys_clkin_ck");
+	clk2 = clk_get_sys(NULL, "timer3_fck");
+	clk_set_parent(clk2, clk1);
+
+	clk2 = clk_get_sys(NULL, "timer6_fck");
+	clk_set_parent(clk2, clk1);
+	/*
+	 * The On-Chip 32K RC Osc clock is not an accurate clock-source as per
+	 * the design/spec, so as a result, for example, timer which supposed
+	 * to get expired @60Sec, but will expire somewhere ~@40Sec, which is
+	 * not expected by any use-case, so change WDT1 clock source to PRCM
+	 * 32KHz clock.
+	 */
+	clk1 = clk_get_sys(NULL, "wdt1_fck");
+	clk2 = clk_get_sys(NULL, "clkdiv32k_ick");
+	clk_set_parent(clk1, clk2);
+
+	return 0;
+}