Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 265 insertions, 0 deletions

diff --git a/drivers/dma/bestcomm/fec.c b/drivers/dma/bestcomm/fec.c
new file mode 100644
index 000000000..3a4a2f791
--- /dev/null
+++ b/drivers/dma/bestcomm/fec.c
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Bestcomm FEC tasks driver
+ *
+ * Copyright (C) 2006-2007 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003-2004 MontaVista, Software, Inc.
+ *                         ( by Dale Farnsworth <dfarnsworth@mvista.com> )
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <asm/io.h>
+
+#include <linux/fsl/bestcomm/bestcomm.h>
+#include <linux/fsl/bestcomm/bestcomm_priv.h>
+#include <linux/fsl/bestcomm/fec.h>
+
+
+/* ======================================================================== */
+/* Task image/var/inc                                                       */
+/* ======================================================================== */
+
+/* fec tasks images */
+extern u32 bcom_fec_rx_task[];
+extern u32 bcom_fec_tx_task[];
+
+/* rx task vars that need to be set before enabling the task */
+struct bcom_fec_rx_var {
+	u32 enable;		/* (u16*) address of task's control register */
+	u32 fifo;		/* (u32*) address of fec's fifo */
+	u32 bd_base;		/* (struct bcom_bd*) beginning of ring buffer */
+	u32 bd_last;		/* (struct bcom_bd*) end of ring buffer */
+	u32 bd_start;		/* (struct bcom_bd*) current bd */
+	u32 buffer_size;	/* size of receive buffer */
+};
+
+/* rx task incs that need to be set before enabling the task */
+struct bcom_fec_rx_inc {
+	u16 pad0;
+	s16 incr_bytes;
+	u16 pad1;
+	s16 incr_dst;
+	u16 pad2;
+	s16 incr_dst_ma;
+};
+
+/* tx task vars that need to be set before enabling the task */
+struct bcom_fec_tx_var {
+	u32 DRD;		/* (u32*) address of self-modified DRD */
+	u32 fifo;		/* (u32*) address of fec's fifo */
+	u32 enable;		/* (u16*) address of task's control register */
+	u32 bd_base;		/* (struct bcom_bd*) beginning of ring buffer */
+	u32 bd_last;		/* (struct bcom_bd*) end of ring buffer */
+	u32 bd_start;		/* (struct bcom_bd*) current bd */
+	u32 buffer_size;	/* set by uCode for each packet */
+};
+
+/* tx task incs that need to be set before enabling the task */
+struct bcom_fec_tx_inc {
+	u16 pad0;
+	s16 incr_bytes;
+	u16 pad1;
+	s16 incr_src;
+	u16 pad2;
+	s16 incr_src_ma;
+};
+
+/* private structure in the task */
+struct bcom_fec_priv {
+	phys_addr_t	fifo;
+	int		maxbufsize;
+};
+
+
+/* ======================================================================== */
+/* Task support code                                                        */
+/* ======================================================================== */
+
+struct bcom_task *
+bcom_fec_rx_init(int queue_len, phys_addr_t fifo, int maxbufsize)
+{
+	struct bcom_task *tsk;
+	struct bcom_fec_priv *priv;
+
+	tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_fec_bd),
+				sizeof(struct bcom_fec_priv));
+	if (!tsk)
+		return NULL;
+
+	tsk->flags = BCOM_FLAGS_NONE;
+
+	priv = tsk->priv;
+	priv->fifo = fifo;
+	priv->maxbufsize = maxbufsize;
+
+	if (bcom_fec_rx_reset(tsk)) {
+		bcom_task_free(tsk);
+		return NULL;
+	}
+
+	return tsk;
+}
+EXPORT_SYMBOL_GPL(bcom_fec_rx_init);
+
+int
+bcom_fec_rx_reset(struct bcom_task *tsk)
+{
+	struct bcom_fec_priv *priv = tsk->priv;
+	struct bcom_fec_rx_var *var;
+	struct bcom_fec_rx_inc *inc;
+
+	/* Shutdown the task */
+	bcom_disable_task(tsk->tasknum);
+
+	/* Reset the microcode */
+	var = (struct bcom_fec_rx_var *) bcom_task_var(tsk->tasknum);
+	inc = (struct bcom_fec_rx_inc *) bcom_task_inc(tsk->tasknum);
+
+	if (bcom_load_image(tsk->tasknum, bcom_fec_rx_task))
+		return -1;
+
+	var->enable	= bcom_eng->regs_base +
+				offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]);
+	var->fifo	= (u32) priv->fifo;
+	var->bd_base	= tsk->bd_pa;
+	var->bd_last	= tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size);
+	var->bd_start	= tsk->bd_pa;
+	var->buffer_size = priv->maxbufsize;
+
+	inc->incr_bytes	= -(s16)sizeof(u32);	/* These should be in the   */
+	inc->incr_dst	= sizeof(u32);		/* task image, but we stick */
+	inc->incr_dst_ma= sizeof(u8);		/* to the official ones     */
+
+	/* Reset the BDs */
+	tsk->index = 0;
+	tsk->outdex = 0;
+
+	memset_io(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size);
+
+	/* Configure some stuff */
+	bcom_set_task_pragma(tsk->tasknum, BCOM_FEC_RX_BD_PRAGMA);
+	bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum);
+
+	out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_FEC_RX], BCOM_IPR_FEC_RX);
+
+	out_be32(&bcom_eng->regs->IntPend, 1<<tsk->tasknum);	/* Clear ints */
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bcom_fec_rx_reset);
+
+void
+bcom_fec_rx_release(struct bcom_task *tsk)
+{
+	/* Nothing special for the FEC tasks */
+	bcom_task_free(tsk);
+}
+EXPORT_SYMBOL_GPL(bcom_fec_rx_release);
+
+
+
+	/* Return 2nd to last DRD */
+	/* This is an ugly hack, but at least it's only done
+	   once at initialization */
+static u32 *self_modified_drd(int tasknum)
+{
+	u32 *desc;
+	int num_descs;
+	int drd_count;
+	int i;
+
+	num_descs = bcom_task_num_descs(tasknum);
+	desc = bcom_task_desc(tasknum) + num_descs - 1;
+	drd_count = 0;
+	for (i=0; i<num_descs; i++, desc--)
+		if (bcom_desc_is_drd(*desc) && ++drd_count == 3)
+			break;
+	return desc;
+}
+
+struct bcom_task *
+bcom_fec_tx_init(int queue_len, phys_addr_t fifo)
+{
+	struct bcom_task *tsk;
+	struct bcom_fec_priv *priv;
+
+	tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_fec_bd),
+				sizeof(struct bcom_fec_priv));
+	if (!tsk)
+		return NULL;
+
+	tsk->flags = BCOM_FLAGS_ENABLE_TASK;
+
+	priv = tsk->priv;
+	priv->fifo = fifo;
+
+	if (bcom_fec_tx_reset(tsk)) {
+		bcom_task_free(tsk);
+		return NULL;
+	}
+
+	return tsk;
+}
+EXPORT_SYMBOL_GPL(bcom_fec_tx_init);
+
+int
+bcom_fec_tx_reset(struct bcom_task *tsk)
+{
+	struct bcom_fec_priv *priv = tsk->priv;
+	struct bcom_fec_tx_var *var;
+	struct bcom_fec_tx_inc *inc;
+
+	/* Shutdown the task */
+	bcom_disable_task(tsk->tasknum);
+
+	/* Reset the microcode */
+	var = (struct bcom_fec_tx_var *) bcom_task_var(tsk->tasknum);
+	inc = (struct bcom_fec_tx_inc *) bcom_task_inc(tsk->tasknum);
+
+	if (bcom_load_image(tsk->tasknum, bcom_fec_tx_task))
+		return -1;
+
+	var->enable	= bcom_eng->regs_base +
+				offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]);
+	var->fifo	= (u32) priv->fifo;
+	var->DRD	= bcom_sram_va2pa(self_modified_drd(tsk->tasknum));
+	var->bd_base	= tsk->bd_pa;
+	var->bd_last	= tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size);
+	var->bd_start	= tsk->bd_pa;
+
+	inc->incr_bytes	= -(s16)sizeof(u32);	/* These should be in the   */
+	inc->incr_src	= sizeof(u32);		/* task image, but we stick */
+	inc->incr_src_ma= sizeof(u8);		/* to the official ones     */
+
+	/* Reset the BDs */
+	tsk->index = 0;
+	tsk->outdex = 0;
+
+	memset_io(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size);
+
+	/* Configure some stuff */
+	bcom_set_task_pragma(tsk->tasknum, BCOM_FEC_TX_BD_PRAGMA);
+	bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum);
+
+	out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_FEC_TX], BCOM_IPR_FEC_TX);
+
+	out_be32(&bcom_eng->regs->IntPend, 1<<tsk->tasknum);	/* Clear ints */
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bcom_fec_tx_reset);
+
+void
+bcom_fec_tx_release(struct bcom_task *tsk)
+{
+	/* Nothing special for the FEC tasks */
+	bcom_task_free(tsk);
+}
+EXPORT_SYMBOL_GPL(bcom_fec_tx_release);
+
+
+MODULE_DESCRIPTION("BestComm FEC tasks driver");
+MODULE_AUTHOR("Dale Farnsworth <dfarnsworth@mvista.com>");
+MODULE_LICENSE("GPL v2");