Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

2 files changed, 552 insertions, 0 deletions

diff --git a/drivers/gpu/drm/amd/display/modules/info_packet/Makefile b/drivers/gpu/drm/amd/display/modules/info_packet/Makefile
new file mode 100644
index 000000000..4c382d728
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/modules/info_packet/Makefile
@@ -0,0 +1,31 @@
+#
+# Copyright 2017 Advanced Micro Devices, Inc.
+#
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+# THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+# OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+# ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+# OTHER DEALINGS IN THE SOFTWARE.
+#
+#
+# Makefile for the 'info_packet' sub-module of DAL.
+#
+
+INFO_PACKET = info_packet.o
+
+AMD_DAL_INFO_PACKET = $(addprefix $(AMDDALPATH)/modules/info_packet/,$(INFO_PACKET))
+#$(info ************  DAL INFO_PACKET MODULE MAKEFILE ************)
+
+AMD_DISPLAY_FILES += $(AMD_DAL_INFO_PACKET)
diff --git a/drivers/gpu/drm/amd/display/modules/info_packet/info_packet.c b/drivers/gpu/drm/amd/display/modules/info_packet/info_packet.c
new file mode 100644
index 000000000..69691058a
--- /dev/null
+++ b/drivers/gpu/drm/amd/display/modules/info_packet/info_packet.c
@@ -0,0 +1,521 @@
+/*
+ * Copyright 2018 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#include "mod_info_packet.h"
+#include "core_types.h"
+#include "dc_types.h"
+#include "mod_shared.h"
+#include "mod_freesync.h"
+#include "dc.h"
+
+enum vsc_packet_revision {
+	vsc_packet_undefined = 0,
+	//01h = VSC SDP supports only 3D stereo.
+	vsc_packet_rev1 = 1,
+	//02h = 3D stereo + PSR.
+	vsc_packet_rev2 = 2,
+	//03h = 3D stereo + PSR2.
+	vsc_packet_rev3 = 3,
+	//04h = 3D stereo + PSR/PSR2 + Y-coordinate.
+	vsc_packet_rev4 = 4,
+	//05h = 3D stereo + PSR/PSR2 + Y-coordinate + Pixel Encoding/Colorimetry Format
+	vsc_packet_rev5 = 5,
+};
+
+#define HDMI_INFOFRAME_TYPE_VENDOR 0x81
+#define HF_VSIF_VERSION 1
+
+// VTEM Byte Offset
+#define VTEM_PB0		0
+#define VTEM_PB1		1
+#define VTEM_PB2		2
+#define VTEM_PB3		3
+#define VTEM_PB4		4
+#define VTEM_PB5		5
+#define VTEM_PB6		6
+
+#define VTEM_MD0		7
+#define VTEM_MD1		8
+#define VTEM_MD2		9
+#define VTEM_MD3		10
+
+
+// VTEM Byte Masks
+//PB0
+#define MASK_VTEM_PB0__RESERVED0  0x01
+#define MASK_VTEM_PB0__SYNC       0x02
+#define MASK_VTEM_PB0__VFR        0x04
+#define MASK_VTEM_PB0__AFR        0x08
+#define MASK_VTEM_PB0__DS_TYPE    0x30
+	//0: Periodic pseudo-static EM Data Set
+	//1: Periodic dynamic EM Data Set
+	//2: Unique EM Data Set
+	//3: Reserved
+#define MASK_VTEM_PB0__END        0x40
+#define MASK_VTEM_PB0__NEW        0x80
+
+//PB1
+#define MASK_VTEM_PB1__RESERVED1 0xFF
+
+//PB2
+#define MASK_VTEM_PB2__ORGANIZATION_ID 0xFF
+	//0: This is a Vendor Specific EM Data Set
+	//1: This EM Data Set is defined by This Specification (HDMI 2.1 r102.clean)
+	//2: This EM Data Set is defined by CTA-861-G
+	//3: This EM Data Set is defined by VESA
+//PB3
+#define MASK_VTEM_PB3__DATA_SET_TAG_MSB    0xFF
+//PB4
+#define MASK_VTEM_PB4__DATA_SET_TAG_LSB    0xFF
+//PB5
+#define MASK_VTEM_PB5__DATA_SET_LENGTH_MSB 0xFF
+//PB6
+#define MASK_VTEM_PB6__DATA_SET_LENGTH_LSB 0xFF
+
+
+
+//PB7-27 (20 bytes):
+//PB7 = MD0
+#define MASK_VTEM_MD0__VRR_EN         0x01
+#define MASK_VTEM_MD0__M_CONST        0x02
+#define MASK_VTEM_MD0__QMS_EN         0x04
+#define MASK_VTEM_MD0__RESERVED2      0x08
+#define MASK_VTEM_MD0__FVA_FACTOR_M1  0xF0
+
+//MD1
+#define MASK_VTEM_MD1__BASE_VFRONT    0xFF
+
+//MD2
+#define MASK_VTEM_MD2__BASE_REFRESH_RATE_98  0x03
+#define MASK_VTEM_MD2__RB                    0x04
+#define MASK_VTEM_MD2__NEXT_TFR              0xF8
+
+//MD3
+#define MASK_VTEM_MD3__BASE_REFRESH_RATE_07  0xFF
+
+enum ColorimetryRGBDP {
+	ColorimetryRGB_DP_sRGB               = 0,
+	ColorimetryRGB_DP_AdobeRGB           = 3,
+	ColorimetryRGB_DP_P3                 = 4,
+	ColorimetryRGB_DP_CustomColorProfile = 5,
+	ColorimetryRGB_DP_ITU_R_BT2020RGB    = 6,
+};
+enum ColorimetryYCCDP {
+	ColorimetryYCC_DP_ITU601        = 0,
+	ColorimetryYCC_DP_ITU709        = 1,
+	ColorimetryYCC_DP_AdobeYCC      = 5,
+	ColorimetryYCC_DP_ITU2020YCC    = 6,
+	ColorimetryYCC_DP_ITU2020YCbCr  = 7,
+};
+
+void mod_build_vsc_infopacket(const struct dc_stream_state *stream,
+		struct dc_info_packet *info_packet,
+		enum dc_color_space cs,
+		enum color_transfer_func tf)
+{
+	unsigned int vsc_packet_revision = vsc_packet_undefined;
+	unsigned int i;
+	unsigned int pixelEncoding = 0;
+	unsigned int colorimetryFormat = 0;
+	bool stereo3dSupport = false;
+
+	if (stream->timing.timing_3d_format != TIMING_3D_FORMAT_NONE && stream->view_format != VIEW_3D_FORMAT_NONE) {
+		vsc_packet_revision = vsc_packet_rev1;
+		stereo3dSupport = true;
+	}
+
+	/* VSC packet set to 4 for PSR-SU, or 2 for PSR1 */
+	if (stream->link->psr_settings.psr_version == DC_PSR_VERSION_SU_1)
+		vsc_packet_revision = vsc_packet_rev4;
+	else if (stream->link->psr_settings.psr_version == DC_PSR_VERSION_1)
+		vsc_packet_revision = vsc_packet_rev2;
+
+	/* Update to revision 5 for extended colorimetry support */
+	if (stream->use_vsc_sdp_for_colorimetry)
+		vsc_packet_revision = vsc_packet_rev5;
+
+	/* VSC packet not needed based on the features
+	 * supported by this DP display
+	 */
+	if (vsc_packet_revision == vsc_packet_undefined)
+		return;
+
+	if (vsc_packet_revision == vsc_packet_rev4) {
+		/* Secondary-data Packet ID = 0*/
+		info_packet->hb0 = 0x00;
+		/* 07h - Packet Type Value indicating Video
+		 * Stream Configuration packet
+		 */
+		info_packet->hb1 = 0x07;
+		/* 04h = VSC SDP supporting 3D stereo + PSR/PSR2 + Y-coordinate
+		 * (applies to eDP v1.4 or higher).
+		 */
+		info_packet->hb2 = 0x04;
+		/* 0Eh = VSC SDP supporting 3D stereo + PSR2
+		 * (HB2 = 04h), with Y-coordinate of first scan
+		 * line of the SU region
+		 */
+		info_packet->hb3 = 0x0E;
+
+		for (i = 0; i < 28; i++)
+			info_packet->sb[i] = 0;
+
+		info_packet->valid = true;
+	}
+
+	if (vsc_packet_revision == vsc_packet_rev2) {
+		/* Secondary-data Packet ID = 0*/
+		info_packet->hb0 = 0x00;
+		/* 07h - Packet Type Value indicating Video
+		 * Stream Configuration packet
+		 */
+		info_packet->hb1 = 0x07;
+		/* 02h = VSC SDP supporting 3D stereo and PSR
+		 * (applies to eDP v1.3 or higher).
+		 */
+		info_packet->hb2 = 0x02;
+		/* 08h = VSC packet supporting 3D stereo + PSR
+		 * (HB2 = 02h).
+		 */
+		info_packet->hb3 = 0x08;
+
+		for (i = 0; i < 28; i++)
+			info_packet->sb[i] = 0;
+
+		info_packet->valid = true;
+	}
+
+	if (vsc_packet_revision == vsc_packet_rev1) {
+
+		info_packet->hb0 = 0x00;	// Secondary-data Packet ID = 0
+		info_packet->hb1 = 0x07;	// 07h = Packet Type Value indicating Video Stream Configuration packet
+		info_packet->hb2 = 0x01;	// 01h = Revision number. VSC SDP supporting 3D stereo only
+		info_packet->hb3 = 0x01;	// 01h = VSC SDP supporting 3D stereo only (HB2 = 01h).
+
+		info_packet->valid = true;
+	}
+
+	if (stereo3dSupport) {
+		/* ==============================================================================================================|
+		 * A. STEREO 3D
+		 * ==============================================================================================================|
+		 * VSC Payload (1 byte) From DP1.2 spec
+		 *
+		 * Bits 3:0 (Stereo Interface Method Code)  |  Bits 7:4 (Stereo Interface Method Specific Parameter)
+		 * -----------------------------------------------------------------------------------------------------
+		 * 0 = Non Stereo Video                     |  Must be set to 0x0
+		 * -----------------------------------------------------------------------------------------------------
+		 * 1 = Frame/Field Sequential               |  0x0: L + R view indication based on MISC1 bit 2:1
+		 *                                          |  0x1: Right when Stereo Signal = 1
+		 *                                          |  0x2: Left when Stereo Signal = 1
+		 *                                          |  (others reserved)
+		 * -----------------------------------------------------------------------------------------------------
+		 * 2 = Stacked Frame                        |  0x0: Left view is on top and right view on bottom
+		 *                                          |  (others reserved)
+		 * -----------------------------------------------------------------------------------------------------
+		 * 3 = Pixel Interleaved                    |  0x0: horiz interleaved, right view pixels on even lines
+		 *                                          |  0x1: horiz interleaved, right view pixels on odd lines
+		 *                                          |  0x2: checker board, start with left view pixel
+		 *                                          |  0x3: vertical interleaved, start with left view pixels
+		 *                                          |  0x4: vertical interleaved, start with right view pixels
+		 *                                          |  (others reserved)
+		 * -----------------------------------------------------------------------------------------------------
+		 * 4 = Side-by-side                         |  0x0: left half represents left eye view
+		 *                                          |  0x1: left half represents right eye view
+		 */
+		switch (stream->timing.timing_3d_format) {
+		case TIMING_3D_FORMAT_HW_FRAME_PACKING:
+		case TIMING_3D_FORMAT_SW_FRAME_PACKING:
+		case TIMING_3D_FORMAT_TOP_AND_BOTTOM:
+		case TIMING_3D_FORMAT_TB_SW_PACKED:
+			info_packet->sb[0] = 0x02; // Stacked Frame, Left view is on top and right view on bottom.
+			break;
+		case TIMING_3D_FORMAT_DP_HDMI_INBAND_FA:
+		case TIMING_3D_FORMAT_INBAND_FA:
+			info_packet->sb[0] = 0x01; // Frame/Field Sequential, L + R view indication based on MISC1 bit 2:1
+			break;
+		case TIMING_3D_FORMAT_SIDE_BY_SIDE:
+		case TIMING_3D_FORMAT_SBS_SW_PACKED:
+			info_packet->sb[0] = 0x04; // Side-by-side
+			break;
+		default:
+			info_packet->sb[0] = 0x00; // No Stereo Video, Shall be cleared to 0x0.
+			break;
+		}
+
+	}
+
+	/* 05h = VSC SDP supporting 3D stereo, PSR2, and Pixel Encoding/Colorimetry Format indication.
+	 *   Added in DP1.3, a DP Source device is allowed to indicate the pixel encoding/colorimetry
+	 *   format to the DP Sink device with VSC SDP only when the DP Sink device supports it
+	 *   (i.e., VSC_SDP_EXTENSION_FOR_COLORIMETRY_SUPPORTED bit in the DPRX_FEATURE_ENUMERATION_LIST
+	 *   register (DPCD Address 02210h, bit 3) is set to 1).
+	 *   (Requires VSC_SDP_EXTENSION_FOR_COLORIMETRY_SUPPORTED bit set to 1 in DPCD 02210h. This
+	 *   DPCD register is exposed in the new Extended Receiver Capability field for DPCD Rev. 1.4
+	 *   (and higher). When MISC1. bit 6. is Set to 1, a Source device uses a VSC SDP to indicate
+	 *   the Pixel Encoding/Colorimetry Format and that a Sink device must ignore MISC1, bit 7, and
+	 *   MISC0, bits 7:1 (MISC1, bit 7. and MISC0, bits 7:1 become "don't care").)
+	 */
+	if (vsc_packet_revision == vsc_packet_rev5) {
+		/* Secondary-data Packet ID = 0 */
+		info_packet->hb0 = 0x00;
+		/* 07h - Packet Type Value indicating Video Stream Configuration packet */
+		info_packet->hb1 = 0x07;
+		/* 05h = VSC SDP supporting 3D stereo, PSR2, and Pixel Encoding/Colorimetry Format indication. */
+		info_packet->hb2 = 0x05;
+		/* 13h = VSC SDP supporting 3D stereo, + PSR2, + Pixel Encoding/Colorimetry Format indication (HB2 = 05h). */
+		info_packet->hb3 = 0x13;
+
+		info_packet->valid = true;
+
+		/* Set VSC SDP fields for pixel encoding and colorimetry format from DP 1.3 specs
+		 * Data Bytes DB 18~16
+		 * Bits 3:0 (Colorimetry Format)        |  Bits 7:4 (Pixel Encoding)
+		 * ----------------------------------------------------------------------------------------------------
+		 * 0x0 = sRGB                           |  0 = RGB
+		 * 0x1 = RGB Wide Gamut Fixed Point
+		 * 0x2 = RGB Wide Gamut Floating Point
+		 * 0x3 = AdobeRGB
+		 * 0x4 = DCI-P3
+		 * 0x5 = CustomColorProfile
+		 * (others reserved)
+		 * ----------------------------------------------------------------------------------------------------
+		 * 0x0 = ITU-R BT.601                   |  1 = YCbCr444
+		 * 0x1 = ITU-R BT.709
+		 * 0x2 = xvYCC601
+		 * 0x3 = xvYCC709
+		 * 0x4 = sYCC601
+		 * 0x5 = AdobeYCC601
+		 * 0x6 = ITU-R BT.2020 Y'cC'bcC'rc
+		 * 0x7 = ITU-R BT.2020 Y'C'bC'r
+		 * (others reserved)
+		 * ----------------------------------------------------------------------------------------------------
+		 * 0x0 = ITU-R BT.601                   |  2 = YCbCr422
+		 * 0x1 = ITU-R BT.709
+		 * 0x2 = xvYCC601
+		 * 0x3 = xvYCC709
+		 * 0x4 = sYCC601
+		 * 0x5 = AdobeYCC601
+		 * 0x6 = ITU-R BT.2020 Y'cC'bcC'rc
+		 * 0x7 = ITU-R BT.2020 Y'C'bC'r
+		 * (others reserved)
+		 * ----------------------------------------------------------------------------------------------------
+		 * 0x0 = ITU-R BT.601                   |  3 = YCbCr420
+		 * 0x1 = ITU-R BT.709
+		 * 0x2 = xvYCC601
+		 * 0x3 = xvYCC709
+		 * 0x4 = sYCC601
+		 * 0x5 = AdobeYCC601
+		 * 0x6 = ITU-R BT.2020 Y'cC'bcC'rc
+		 * 0x7 = ITU-R BT.2020 Y'C'bC'r
+		 * (others reserved)
+		 * ----------------------------------------------------------------------------------------------------
+		 * 0x0 =DICOM Part14 Grayscale          |  4 = Yonly
+		 * Display Function
+		 * (others reserved)
+		 */
+
+		/* Set Pixel Encoding */
+		switch (stream->timing.pixel_encoding) {
+		case PIXEL_ENCODING_RGB:
+			pixelEncoding = 0x0;  /* RGB = 0h */
+			break;
+		case PIXEL_ENCODING_YCBCR444:
+			pixelEncoding = 0x1;  /* YCbCr444 = 1h */
+			break;
+		case PIXEL_ENCODING_YCBCR422:
+			pixelEncoding = 0x2;  /* YCbCr422 = 2h */
+			break;
+		case PIXEL_ENCODING_YCBCR420:
+			pixelEncoding = 0x3;  /* YCbCr420 = 3h */
+			break;
+		default:
+			pixelEncoding = 0x0;  /* default RGB = 0h */
+			break;
+		}
+
+		/* Set Colorimetry format based on pixel encoding */
+		switch (stream->timing.pixel_encoding) {
+		case PIXEL_ENCODING_RGB:
+			if ((cs == COLOR_SPACE_SRGB) ||
+					(cs == COLOR_SPACE_SRGB_LIMITED))
+				colorimetryFormat = ColorimetryRGB_DP_sRGB;
+			else if (cs == COLOR_SPACE_ADOBERGB)
+				colorimetryFormat = ColorimetryRGB_DP_AdobeRGB;
+			else if ((cs == COLOR_SPACE_2020_RGB_FULLRANGE) ||
+					(cs == COLOR_SPACE_2020_RGB_LIMITEDRANGE))
+				colorimetryFormat = ColorimetryRGB_DP_ITU_R_BT2020RGB;
+			break;
+
+		case PIXEL_ENCODING_YCBCR444:
+		case PIXEL_ENCODING_YCBCR422:
+		case PIXEL_ENCODING_YCBCR420:
+			/* Note: xvYCC probably not supported correctly here on DP since colorspace translation
+			 * loses distinction between BT601 vs xvYCC601 in translation
+			 */
+			if (cs == COLOR_SPACE_YCBCR601)
+				colorimetryFormat = ColorimetryYCC_DP_ITU601;
+			else if (cs == COLOR_SPACE_YCBCR709)
+				colorimetryFormat = ColorimetryYCC_DP_ITU709;
+			else if (cs == COLOR_SPACE_ADOBERGB)
+				colorimetryFormat = ColorimetryYCC_DP_AdobeYCC;
+			else if (cs == COLOR_SPACE_2020_YCBCR)
+				colorimetryFormat = ColorimetryYCC_DP_ITU2020YCbCr;
+
+			if (cs == COLOR_SPACE_2020_YCBCR && tf == TRANSFER_FUNC_GAMMA_22)
+				colorimetryFormat = ColorimetryYCC_DP_ITU709;
+			break;
+
+		default:
+			colorimetryFormat = ColorimetryRGB_DP_sRGB;
+			break;
+		}
+
+		info_packet->sb[16] = (pixelEncoding << 4) | colorimetryFormat;
+
+		/* Set color depth */
+		switch (stream->timing.display_color_depth) {
+		case COLOR_DEPTH_666:
+			/* NOTE: This is actually not valid for YCbCr pixel encoding to have 6 bpc
+			 *       as of DP1.4 spec, but value of 0 probably reserved here for potential future use.
+			 */
+			info_packet->sb[17] = 0;
+			break;
+		case COLOR_DEPTH_888:
+			info_packet->sb[17] = 1;
+			break;
+		case COLOR_DEPTH_101010:
+			info_packet->sb[17] = 2;
+			break;
+		case COLOR_DEPTH_121212:
+			info_packet->sb[17] = 3;
+			break;
+		/*case COLOR_DEPTH_141414: -- NO SUCH FORMAT IN DP SPEC */
+		case COLOR_DEPTH_161616:
+			info_packet->sb[17] = 4;
+			break;
+		default:
+			info_packet->sb[17] = 0;
+			break;
+		}
+
+		/* all YCbCr are always limited range */
+		if ((cs == COLOR_SPACE_SRGB_LIMITED) ||
+				(cs == COLOR_SPACE_2020_RGB_LIMITEDRANGE) ||
+				(pixelEncoding != 0x0)) {
+			info_packet->sb[17] |= 0x80; /* DB17 bit 7 set to 1 for CEA timing. */
+		}
+
+		/* Content Type (Bits 2:0)
+		 *  0 = Not defined.
+		 *  1 = Graphics.
+		 *  2 = Photo.
+		 *  3 = Video.
+		 *  4 = Game.
+		 */
+		info_packet->sb[18] = 0;
+	}
+}
+
+/**
+ *  mod_build_hf_vsif_infopacket - Prepare HDMI Vendor Specific info frame.
+ *                                 Follows HDMI Spec to build up Vendor Specific info frame
+ *
+ *  @stream:      contains data we may need to construct VSIF (i.e. timing_3d_format, etc.)
+ *  @info_packet: output structure where to store VSIF
+ */
+void mod_build_hf_vsif_infopacket(const struct dc_stream_state *stream,
+		struct dc_info_packet *info_packet)
+{
+		unsigned int length = 5;
+		bool hdmi_vic_mode = false;
+		uint8_t checksum = 0;
+		uint32_t i = 0;
+		enum dc_timing_3d_format format;
+
+		info_packet->valid = false;
+		format = stream->timing.timing_3d_format;
+		if (stream->view_format == VIEW_3D_FORMAT_NONE)
+			format = TIMING_3D_FORMAT_NONE;
+
+		if (stream->timing.hdmi_vic != 0
+				&& stream->timing.h_total >= 3840
+				&& stream->timing.v_total >= 2160
+				&& format == TIMING_3D_FORMAT_NONE)
+			hdmi_vic_mode = true;
+
+		if ((format == TIMING_3D_FORMAT_NONE) && !hdmi_vic_mode)
+			return;
+
+		info_packet->sb[1] = 0x03;
+		info_packet->sb[2] = 0x0C;
+		info_packet->sb[3] = 0x00;
+
+		if (format != TIMING_3D_FORMAT_NONE)
+			info_packet->sb[4] = (2 << 5);
+
+		else if (hdmi_vic_mode)
+			info_packet->sb[4] = (1 << 5);
+
+		switch (format) {
+		case TIMING_3D_FORMAT_HW_FRAME_PACKING:
+		case TIMING_3D_FORMAT_SW_FRAME_PACKING:
+			info_packet->sb[5] = (0x0 << 4);
+			break;
+
+		case TIMING_3D_FORMAT_SIDE_BY_SIDE:
+		case TIMING_3D_FORMAT_SBS_SW_PACKED:
+			info_packet->sb[5] = (0x8 << 4);
+			length = 6;
+			break;
+
+		case TIMING_3D_FORMAT_TOP_AND_BOTTOM:
+		case TIMING_3D_FORMAT_TB_SW_PACKED:
+			info_packet->sb[5] = (0x6 << 4);
+			break;
+
+		default:
+			break;
+		}
+
+		if (hdmi_vic_mode)
+			info_packet->sb[5] = stream->timing.hdmi_vic;
+
+		info_packet->hb0 = HDMI_INFOFRAME_TYPE_VENDOR;
+		info_packet->hb1 = 0x01;
+		info_packet->hb2 = (uint8_t) (length);
+
+		checksum += info_packet->hb0;
+		checksum += info_packet->hb1;
+		checksum += info_packet->hb2;
+
+		for (i = 1; i <= length; i++)
+			checksum += info_packet->sb[i];
+
+		info_packet->sb[0] = (uint8_t) (0x100 - checksum);
+
+		info_packet->valid = true;
+}
+