Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 652 insertions, 0 deletions

diff --git a/drivers/gpu/drm/panel/panel-dsi-cm.c b/drivers/gpu/drm/panel/panel-dsi-cm.c
new file mode 100644
index 000000000..ba17bcc44
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-dsi-cm.c
@@ -0,0 +1,652 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Generic DSI Command Mode panel driver
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_connector.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+#include <video/mipi_display.h>
+
+#define DCS_GET_ID1		0xda
+#define DCS_GET_ID2		0xdb
+#define DCS_GET_ID3		0xdc
+
+#define DCS_REGULATOR_SUPPLY_NUM 2
+
+static const struct of_device_id dsicm_of_match[];
+
+struct dsic_panel_data {
+	u32 xres;
+	u32 yres;
+	u32 refresh;
+	u32 width_mm;
+	u32 height_mm;
+	u32 max_hs_rate;
+	u32 max_lp_rate;
+	bool te_support;
+};
+
+struct panel_drv_data {
+	struct mipi_dsi_device *dsi;
+	struct drm_panel panel;
+	struct drm_display_mode mode;
+
+	struct mutex lock;
+
+	struct backlight_device *bldev;
+	struct backlight_device *extbldev;
+
+	unsigned long	hw_guard_end;	/* next value of jiffies when we can
+					 * issue the next sleep in/out command
+					 */
+	unsigned long	hw_guard_wait;	/* max guard time in jiffies */
+
+	const struct dsic_panel_data *panel_data;
+
+	struct gpio_desc *reset_gpio;
+
+	struct regulator_bulk_data supplies[DCS_REGULATOR_SUPPLY_NUM];
+
+	bool use_dsi_backlight;
+
+	/* runtime variables */
+	bool enabled;
+
+	bool intro_printed;
+};
+
+static inline struct panel_drv_data *panel_to_ddata(struct drm_panel *panel)
+{
+	return container_of(panel, struct panel_drv_data, panel);
+}
+
+static void dsicm_bl_power(struct panel_drv_data *ddata, bool enable)
+{
+	struct backlight_device *backlight;
+
+	if (ddata->bldev)
+		backlight = ddata->bldev;
+	else if (ddata->extbldev)
+		backlight = ddata->extbldev;
+	else
+		return;
+
+	if (enable)
+		backlight_enable(backlight);
+	else
+		backlight_disable(backlight);
+}
+
+static void hw_guard_start(struct panel_drv_data *ddata, int guard_msec)
+{
+	ddata->hw_guard_wait = msecs_to_jiffies(guard_msec);
+	ddata->hw_guard_end = jiffies + ddata->hw_guard_wait;
+}
+
+static void hw_guard_wait(struct panel_drv_data *ddata)
+{
+	unsigned long wait = ddata->hw_guard_end - jiffies;
+
+	if ((long)wait > 0 && wait <= ddata->hw_guard_wait) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(wait);
+	}
+}
+
+static int dsicm_dcs_read_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 *data)
+{
+	return mipi_dsi_dcs_read(ddata->dsi, dcs_cmd, data, 1);
+}
+
+static int dsicm_dcs_write_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 param)
+{
+	return mipi_dsi_dcs_write(ddata->dsi, dcs_cmd, &param, 1);
+}
+
+static int dsicm_sleep_in(struct panel_drv_data *ddata)
+
+{
+	int r;
+
+	hw_guard_wait(ddata);
+
+	r = mipi_dsi_dcs_enter_sleep_mode(ddata->dsi);
+	if (r)
+		return r;
+
+	hw_guard_start(ddata, 120);
+
+	usleep_range(5000, 10000);
+
+	return 0;
+}
+
+static int dsicm_sleep_out(struct panel_drv_data *ddata)
+{
+	int r;
+
+	hw_guard_wait(ddata);
+
+	r = mipi_dsi_dcs_exit_sleep_mode(ddata->dsi);
+	if (r)
+		return r;
+
+	hw_guard_start(ddata, 120);
+
+	usleep_range(5000, 10000);
+
+	return 0;
+}
+
+static int dsicm_get_id(struct panel_drv_data *ddata, u8 *id1, u8 *id2, u8 *id3)
+{
+	int r;
+
+	r = dsicm_dcs_read_1(ddata, DCS_GET_ID1, id1);
+	if (r)
+		return r;
+	r = dsicm_dcs_read_1(ddata, DCS_GET_ID2, id2);
+	if (r)
+		return r;
+	r = dsicm_dcs_read_1(ddata, DCS_GET_ID3, id3);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static int dsicm_set_update_window(struct panel_drv_data *ddata)
+{
+	struct mipi_dsi_device *dsi = ddata->dsi;
+	int r;
+
+	r = mipi_dsi_dcs_set_column_address(dsi, 0, ddata->mode.hdisplay - 1);
+	if (r < 0)
+		return r;
+
+	r = mipi_dsi_dcs_set_page_address(dsi, 0, ddata->mode.vdisplay - 1);
+	if (r < 0)
+		return r;
+
+	return 0;
+}
+
+static int dsicm_bl_update_status(struct backlight_device *dev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
+	int r = 0;
+	int level = backlight_get_brightness(dev);
+
+	dev_dbg(&ddata->dsi->dev, "update brightness to %d\n", level);
+
+	mutex_lock(&ddata->lock);
+
+	if (ddata->enabled)
+		r = dsicm_dcs_write_1(ddata, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
+				      level);
+
+	mutex_unlock(&ddata->lock);
+
+	return r;
+}
+
+static int dsicm_bl_get_intensity(struct backlight_device *dev)
+{
+	return backlight_get_brightness(dev);
+}
+
+static const struct backlight_ops dsicm_bl_ops = {
+	.get_brightness = dsicm_bl_get_intensity,
+	.update_status  = dsicm_bl_update_status,
+};
+
+static ssize_t num_dsi_errors_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+	u8 errors = 0;
+	int r = -ENODEV;
+
+	mutex_lock(&ddata->lock);
+
+	if (ddata->enabled)
+		r = dsicm_dcs_read_1(ddata, MIPI_DCS_GET_ERROR_COUNT_ON_DSI, &errors);
+
+	mutex_unlock(&ddata->lock);
+
+	if (r)
+		return r;
+
+	return sysfs_emit(buf, "%d\n", errors);
+}
+
+static ssize_t hw_revision_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+	u8 id1, id2, id3;
+	int r = -ENODEV;
+
+	mutex_lock(&ddata->lock);
+
+	if (ddata->enabled)
+		r = dsicm_get_id(ddata, &id1, &id2, &id3);
+
+	mutex_unlock(&ddata->lock);
+
+	if (r)
+		return r;
+
+	return sysfs_emit(buf, "%02x.%02x.%02x\n", id1, id2, id3);
+}
+
+static DEVICE_ATTR_RO(num_dsi_errors);
+static DEVICE_ATTR_RO(hw_revision);
+
+static struct attribute *dsicm_attrs[] = {
+	&dev_attr_num_dsi_errors.attr,
+	&dev_attr_hw_revision.attr,
+	NULL,
+};
+
+static const struct attribute_group dsicm_attr_group = {
+	.attrs = dsicm_attrs,
+};
+
+static void dsicm_hw_reset(struct panel_drv_data *ddata)
+{
+	gpiod_set_value(ddata->reset_gpio, 1);
+	udelay(10);
+	/* reset the panel */
+	gpiod_set_value(ddata->reset_gpio, 0);
+	/* assert reset */
+	udelay(10);
+	gpiod_set_value(ddata->reset_gpio, 1);
+	/* wait after releasing reset */
+	usleep_range(5000, 10000);
+}
+
+static int dsicm_power_on(struct panel_drv_data *ddata)
+{
+	u8 id1, id2, id3;
+	int r;
+
+	dsicm_hw_reset(ddata);
+
+	ddata->dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	r = dsicm_sleep_out(ddata);
+	if (r)
+		goto err;
+
+	r = dsicm_get_id(ddata, &id1, &id2, &id3);
+	if (r)
+		goto err;
+
+	r = dsicm_dcs_write_1(ddata, MIPI_DCS_SET_DISPLAY_BRIGHTNESS, 0xff);
+	if (r)
+		goto err;
+
+	r = dsicm_dcs_write_1(ddata, MIPI_DCS_WRITE_CONTROL_DISPLAY,
+			(1<<2) | (1<<5));	/* BL | BCTRL */
+	if (r)
+		goto err;
+
+	r = mipi_dsi_dcs_set_pixel_format(ddata->dsi, MIPI_DCS_PIXEL_FMT_24BIT);
+	if (r)
+		goto err;
+
+	r = dsicm_set_update_window(ddata);
+	if (r)
+		goto err;
+
+	r = mipi_dsi_dcs_set_display_on(ddata->dsi);
+	if (r)
+		goto err;
+
+	if (ddata->panel_data->te_support) {
+		r = mipi_dsi_dcs_set_tear_on(ddata->dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+		if (r)
+			goto err;
+	}
+
+	/* possible panel bug */
+	msleep(100);
+
+	ddata->enabled = true;
+
+	if (!ddata->intro_printed) {
+		dev_info(&ddata->dsi->dev, "panel revision %02x.%02x.%02x\n",
+			id1, id2, id3);
+		ddata->intro_printed = true;
+	}
+
+	ddata->dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	return 0;
+err:
+	dev_err(&ddata->dsi->dev, "error while enabling panel, issuing HW reset\n");
+
+	dsicm_hw_reset(ddata);
+
+	return r;
+}
+
+static int dsicm_power_off(struct panel_drv_data *ddata)
+{
+	int r;
+
+	ddata->enabled = false;
+
+	r = mipi_dsi_dcs_set_display_off(ddata->dsi);
+	if (!r)
+		r = dsicm_sleep_in(ddata);
+
+	if (r) {
+		dev_err(&ddata->dsi->dev,
+				"error disabling panel, issuing HW reset\n");
+		dsicm_hw_reset(ddata);
+	}
+
+	return r;
+}
+
+static int dsicm_prepare(struct drm_panel *panel)
+{
+	struct panel_drv_data *ddata = panel_to_ddata(panel);
+	int r;
+
+	r = regulator_bulk_enable(ARRAY_SIZE(ddata->supplies), ddata->supplies);
+	if (r)
+		dev_err(&ddata->dsi->dev, "failed to enable supplies: %d\n", r);
+
+	return r;
+}
+
+static int dsicm_enable(struct drm_panel *panel)
+{
+	struct panel_drv_data *ddata = panel_to_ddata(panel);
+	int r;
+
+	mutex_lock(&ddata->lock);
+
+	r = dsicm_power_on(ddata);
+	if (r)
+		goto err;
+
+	mutex_unlock(&ddata->lock);
+
+	dsicm_bl_power(ddata, true);
+
+	return 0;
+err:
+	dev_err(&ddata->dsi->dev, "enable failed (%d)\n", r);
+	mutex_unlock(&ddata->lock);
+	return r;
+}
+
+static int dsicm_unprepare(struct drm_panel *panel)
+{
+	struct panel_drv_data *ddata = panel_to_ddata(panel);
+	int r;
+
+	r = regulator_bulk_disable(ARRAY_SIZE(ddata->supplies), ddata->supplies);
+	if (r)
+		dev_err(&ddata->dsi->dev, "failed to disable supplies: %d\n", r);
+
+	return r;
+}
+
+static int dsicm_disable(struct drm_panel *panel)
+{
+	struct panel_drv_data *ddata = panel_to_ddata(panel);
+	int r;
+
+	dsicm_bl_power(ddata, false);
+
+	mutex_lock(&ddata->lock);
+
+	r = dsicm_power_off(ddata);
+
+	mutex_unlock(&ddata->lock);
+
+	return r;
+}
+
+static int dsicm_get_modes(struct drm_panel *panel,
+			   struct drm_connector *connector)
+{
+	struct panel_drv_data *ddata = panel_to_ddata(panel);
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, &ddata->mode);
+	if (!mode) {
+		dev_err(&ddata->dsi->dev, "failed to add mode %ux%ux@%u kHz\n",
+			ddata->mode.hdisplay, ddata->mode.vdisplay,
+			ddata->mode.clock);
+		return -ENOMEM;
+	}
+
+	connector->display_info.width_mm = ddata->panel_data->width_mm;
+	connector->display_info.height_mm = ddata->panel_data->height_mm;
+
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs dsicm_panel_funcs = {
+	.unprepare = dsicm_unprepare,
+	.disable = dsicm_disable,
+	.prepare = dsicm_prepare,
+	.enable = dsicm_enable,
+	.get_modes = dsicm_get_modes,
+};
+
+static int dsicm_probe_of(struct mipi_dsi_device *dsi)
+{
+	struct backlight_device *backlight;
+	struct panel_drv_data *ddata = mipi_dsi_get_drvdata(dsi);
+	int err;
+	struct drm_display_mode *mode = &ddata->mode;
+
+	ddata->reset_gpio = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ddata->reset_gpio)) {
+		err = PTR_ERR(ddata->reset_gpio);
+		dev_err(&dsi->dev, "reset gpio request failed: %d", err);
+		return err;
+	}
+
+	mode->hdisplay = mode->hsync_start = mode->hsync_end = mode->htotal =
+		ddata->panel_data->xres;
+	mode->vdisplay = mode->vsync_start = mode->vsync_end = mode->vtotal =
+		ddata->panel_data->yres;
+	mode->clock = ddata->panel_data->xres * ddata->panel_data->yres *
+		ddata->panel_data->refresh / 1000;
+	mode->width_mm = ddata->panel_data->width_mm;
+	mode->height_mm = ddata->panel_data->height_mm;
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	drm_mode_set_name(mode);
+
+	ddata->supplies[0].supply = "vpnl";
+	ddata->supplies[1].supply = "vddi";
+	err = devm_regulator_bulk_get(&dsi->dev, ARRAY_SIZE(ddata->supplies),
+				      ddata->supplies);
+	if (err)
+		return err;
+
+	backlight = devm_of_find_backlight(&dsi->dev);
+	if (IS_ERR(backlight))
+		return PTR_ERR(backlight);
+
+	/* If no backlight device is found assume native backlight support */
+	if (backlight)
+		ddata->extbldev = backlight;
+	else
+		ddata->use_dsi_backlight = true;
+
+	return 0;
+}
+
+static int dsicm_probe(struct mipi_dsi_device *dsi)
+{
+	struct panel_drv_data *ddata;
+	struct backlight_device *bldev = NULL;
+	struct device *dev = &dsi->dev;
+	int r;
+
+	dev_dbg(dev, "probe\n");
+
+	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	mipi_dsi_set_drvdata(dsi, ddata);
+	ddata->dsi = dsi;
+
+	ddata->panel_data = of_device_get_match_data(dev);
+	if (!ddata->panel_data)
+		return -ENODEV;
+
+	r = dsicm_probe_of(dsi);
+	if (r)
+		return r;
+
+	mutex_init(&ddata->lock);
+
+	dsicm_hw_reset(ddata);
+
+	drm_panel_init(&ddata->panel, dev, &dsicm_panel_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+
+	if (ddata->use_dsi_backlight) {
+		struct backlight_properties props = { 0 };
+		props.max_brightness = 255;
+		props.type = BACKLIGHT_RAW;
+
+		bldev = devm_backlight_device_register(dev, dev_name(dev),
+			dev, ddata, &dsicm_bl_ops, &props);
+		if (IS_ERR(bldev)) {
+			r = PTR_ERR(bldev);
+			goto err_bl;
+		}
+
+		ddata->bldev = bldev;
+	}
+
+	r = sysfs_create_group(&dev->kobj, &dsicm_attr_group);
+	if (r) {
+		dev_err(dev, "failed to create sysfs files\n");
+		goto err_bl;
+	}
+
+	dsi->lanes = 2;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS |
+			  MIPI_DSI_MODE_NO_EOT_PACKET;
+	dsi->hs_rate = ddata->panel_data->max_hs_rate;
+	dsi->lp_rate = ddata->panel_data->max_lp_rate;
+
+	drm_panel_add(&ddata->panel);
+
+	r = mipi_dsi_attach(dsi);
+	if (r < 0)
+		goto err_dsi_attach;
+
+	return 0;
+
+err_dsi_attach:
+	drm_panel_remove(&ddata->panel);
+	sysfs_remove_group(&dsi->dev.kobj, &dsicm_attr_group);
+err_bl:
+	if (ddata->extbldev)
+		put_device(&ddata->extbldev->dev);
+
+	return r;
+}
+
+static void dsicm_remove(struct mipi_dsi_device *dsi)
+{
+	struct panel_drv_data *ddata = mipi_dsi_get_drvdata(dsi);
+
+	dev_dbg(&dsi->dev, "remove\n");
+
+	mipi_dsi_detach(dsi);
+
+	drm_panel_remove(&ddata->panel);
+
+	sysfs_remove_group(&dsi->dev.kobj, &dsicm_attr_group);
+
+	if (ddata->extbldev)
+		put_device(&ddata->extbldev->dev);
+}
+
+static const struct dsic_panel_data taal_data = {
+	.xres = 864,
+	.yres = 480,
+	.refresh = 60,
+	.width_mm = 0,
+	.height_mm = 0,
+	.max_hs_rate = 300000000,
+	.max_lp_rate = 10000000,
+	.te_support = true,
+};
+
+static const struct dsic_panel_data himalaya_data = {
+	.xres = 480,
+	.yres = 864,
+	.refresh = 60,
+	.width_mm = 49,
+	.height_mm = 88,
+	.max_hs_rate = 300000000,
+	.max_lp_rate = 10000000,
+	.te_support = false,
+};
+
+static const struct dsic_panel_data droid4_data = {
+	.xres = 540,
+	.yres = 960,
+	.refresh = 60,
+	.width_mm = 50,
+	.height_mm = 89,
+	.max_hs_rate = 300000000,
+	.max_lp_rate = 10000000,
+	.te_support = false,
+};
+
+static const struct of_device_id dsicm_of_match[] = {
+	{ .compatible = "tpo,taal", .data = &taal_data },
+	{ .compatible = "nokia,himalaya", &himalaya_data },
+	{ .compatible = "motorola,droid4-panel", &droid4_data },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, dsicm_of_match);
+
+static struct mipi_dsi_driver dsicm_driver = {
+	.probe = dsicm_probe,
+	.remove = dsicm_remove,
+	.driver = {
+		.name = "panel-dsi-cm",
+		.of_match_table = dsicm_of_match,
+	},
+};
+module_mipi_dsi_driver(dsicm_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("Generic DSI Command Mode Panel Driver");
+MODULE_LICENSE("GPL");