Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 285 insertions, 0 deletions

diff --git a/drivers/gpu/drm/tidss/tidss_kms.c b/drivers/gpu/drm/tidss/tidss_kms.c
new file mode 100644
index 000000000..345bcc301
--- /dev/null
+++ b/drivers/gpu/drm/tidss/tidss_kms.c
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com/
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ */
+
+#include <linux/dma-fence.h>
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_vblank.h>
+
+#include "tidss_crtc.h"
+#include "tidss_dispc.h"
+#include "tidss_drv.h"
+#include "tidss_encoder.h"
+#include "tidss_kms.h"
+#include "tidss_plane.h"
+
+static void tidss_atomic_commit_tail(struct drm_atomic_state *old_state)
+{
+	struct drm_device *ddev = old_state->dev;
+	struct tidss_device *tidss = to_tidss(ddev);
+	bool fence_cookie = dma_fence_begin_signalling();
+
+	dev_dbg(ddev->dev, "%s\n", __func__);
+
+	tidss_runtime_get(tidss);
+
+	drm_atomic_helper_commit_modeset_disables(ddev, old_state);
+	drm_atomic_helper_commit_planes(ddev, old_state, 0);
+	drm_atomic_helper_commit_modeset_enables(ddev, old_state);
+
+	drm_atomic_helper_commit_hw_done(old_state);
+	dma_fence_end_signalling(fence_cookie);
+	drm_atomic_helper_wait_for_flip_done(ddev, old_state);
+
+	drm_atomic_helper_cleanup_planes(ddev, old_state);
+
+	tidss_runtime_put(tidss);
+}
+
+static const struct drm_mode_config_helper_funcs mode_config_helper_funcs = {
+	.atomic_commit_tail = tidss_atomic_commit_tail,
+};
+
+static int tidss_atomic_check(struct drm_device *ddev,
+			      struct drm_atomic_state *state)
+{
+	struct drm_plane_state *opstate;
+	struct drm_plane_state *npstate;
+	struct drm_plane *plane;
+	struct drm_crtc_state *cstate;
+	struct drm_crtc *crtc;
+	int ret, i;
+
+	ret = drm_atomic_helper_check(ddev, state);
+	if (ret)
+		return ret;
+
+	/*
+	 * Add all active planes on a CRTC to the atomic state, if
+	 * x/y/z position or activity of any plane on that CRTC
+	 * changes. This is needed for updating the plane positions in
+	 * tidss_crtc_position_planes() which is called from
+	 * crtc_atomic_enable() and crtc_atomic_flush(). We have an
+	 * extra flag to mark x,y-position changes and together
+	 * with zpos_changed the condition recognizes all the above
+	 * cases.
+	 */
+	for_each_oldnew_plane_in_state(state, plane, opstate, npstate, i) {
+		if (!npstate->crtc || !npstate->visible)
+			continue;
+
+		if (!opstate->crtc || opstate->crtc_x != npstate->crtc_x ||
+		    opstate->crtc_y != npstate->crtc_y) {
+			cstate = drm_atomic_get_crtc_state(state,
+							   npstate->crtc);
+			if (IS_ERR(cstate))
+				return PTR_ERR(cstate);
+			to_tidss_crtc_state(cstate)->plane_pos_changed = true;
+		}
+	}
+
+	for_each_new_crtc_in_state(state, crtc, cstate, i) {
+		if (to_tidss_crtc_state(cstate)->plane_pos_changed ||
+		    cstate->zpos_changed) {
+			ret = drm_atomic_add_affected_planes(state, crtc);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct drm_mode_config_funcs mode_config_funcs = {
+	.fb_create = drm_gem_fb_create,
+	.atomic_check = tidss_atomic_check,
+	.atomic_commit = drm_atomic_helper_commit,
+};
+
+static int tidss_dispc_modeset_init(struct tidss_device *tidss)
+{
+	struct device *dev = tidss->dev;
+	unsigned int fourccs_len;
+	const u32 *fourccs = dispc_plane_formats(tidss->dispc, &fourccs_len);
+	unsigned int i;
+
+	struct pipe {
+		u32 hw_videoport;
+		struct drm_bridge *bridge;
+		u32 enc_type;
+	};
+
+	const struct dispc_features *feat = tidss->feat;
+	u32 max_vps = feat->num_vps;
+	u32 max_planes = feat->num_planes;
+
+	struct pipe pipes[TIDSS_MAX_PORTS];
+	u32 num_pipes = 0;
+	u32 crtc_mask;
+
+	/* first find all the connected panels & bridges */
+
+	for (i = 0; i < max_vps; i++) {
+		struct drm_panel *panel;
+		struct drm_bridge *bridge;
+		u32 enc_type = DRM_MODE_ENCODER_NONE;
+		int ret;
+
+		ret = drm_of_find_panel_or_bridge(dev->of_node, i, 0,
+						  &panel, &bridge);
+		if (ret == -ENODEV) {
+			dev_dbg(dev, "no panel/bridge for port %d\n", i);
+			continue;
+		} else if (ret) {
+			dev_dbg(dev, "port %d probe returned %d\n", i, ret);
+			return ret;
+		}
+
+		if (panel) {
+			u32 conn_type;
+
+			dev_dbg(dev, "Setting up panel for port %d\n", i);
+
+			switch (feat->vp_bus_type[i]) {
+			case DISPC_VP_OLDI:
+				enc_type = DRM_MODE_ENCODER_LVDS;
+				conn_type = DRM_MODE_CONNECTOR_LVDS;
+				break;
+			case DISPC_VP_DPI:
+				enc_type = DRM_MODE_ENCODER_DPI;
+				conn_type = DRM_MODE_CONNECTOR_DPI;
+				break;
+			default:
+				WARN_ON(1);
+				return -EINVAL;
+			}
+
+			if (panel->connector_type != conn_type) {
+				dev_err(dev,
+					"%s: Panel %s has incompatible connector type for vp%d (%d != %d)\n",
+					 __func__, dev_name(panel->dev), i,
+					 panel->connector_type, conn_type);
+				return -EINVAL;
+			}
+
+			bridge = devm_drm_panel_bridge_add(dev, panel);
+			if (IS_ERR(bridge)) {
+				dev_err(dev,
+					"failed to set up panel bridge for port %d\n",
+					i);
+				return PTR_ERR(bridge);
+			}
+		}
+
+		pipes[num_pipes].hw_videoport = i;
+		pipes[num_pipes].bridge = bridge;
+		pipes[num_pipes].enc_type = enc_type;
+		num_pipes++;
+	}
+
+	/* all planes can be on any crtc */
+	crtc_mask = (1 << num_pipes) - 1;
+
+	/* then create a plane, a crtc and an encoder for each panel/bridge */
+
+	for (i = 0; i < num_pipes; ++i) {
+		struct tidss_plane *tplane;
+		struct tidss_crtc *tcrtc;
+		struct drm_encoder *enc;
+		u32 hw_plane_id = feat->vid_order[tidss->num_planes];
+		int ret;
+
+		tplane = tidss_plane_create(tidss, hw_plane_id,
+					    DRM_PLANE_TYPE_PRIMARY, crtc_mask,
+					    fourccs, fourccs_len);
+		if (IS_ERR(tplane)) {
+			dev_err(tidss->dev, "plane create failed\n");
+			return PTR_ERR(tplane);
+		}
+
+		tidss->planes[tidss->num_planes++] = &tplane->plane;
+
+		tcrtc = tidss_crtc_create(tidss, pipes[i].hw_videoport,
+					  &tplane->plane);
+		if (IS_ERR(tcrtc)) {
+			dev_err(tidss->dev, "crtc create failed\n");
+			return PTR_ERR(tcrtc);
+		}
+
+		tidss->crtcs[tidss->num_crtcs++] = &tcrtc->crtc;
+
+		enc = tidss_encoder_create(tidss, pipes[i].enc_type,
+					   1 << tcrtc->crtc.index);
+		if (IS_ERR(enc)) {
+			dev_err(tidss->dev, "encoder create failed\n");
+			return PTR_ERR(enc);
+		}
+
+		ret = drm_bridge_attach(enc, pipes[i].bridge, NULL, 0);
+		if (ret)
+			return ret;
+	}
+
+	/* create overlay planes of the leftover planes */
+
+	while (tidss->num_planes < max_planes) {
+		struct tidss_plane *tplane;
+		u32 hw_plane_id = feat->vid_order[tidss->num_planes];
+
+		tplane = tidss_plane_create(tidss, hw_plane_id,
+					    DRM_PLANE_TYPE_OVERLAY, crtc_mask,
+					    fourccs, fourccs_len);
+
+		if (IS_ERR(tplane)) {
+			dev_err(tidss->dev, "plane create failed\n");
+			return PTR_ERR(tplane);
+		}
+
+		tidss->planes[tidss->num_planes++] = &tplane->plane;
+	}
+
+	return 0;
+}
+
+int tidss_modeset_init(struct tidss_device *tidss)
+{
+	struct drm_device *ddev = &tidss->ddev;
+	int ret;
+
+	dev_dbg(tidss->dev, "%s\n", __func__);
+
+	ret = drmm_mode_config_init(ddev);
+	if (ret)
+		return ret;
+
+	ddev->mode_config.min_width = 8;
+	ddev->mode_config.min_height = 8;
+	ddev->mode_config.max_width = 8096;
+	ddev->mode_config.max_height = 8096;
+	ddev->mode_config.normalize_zpos = true;
+	ddev->mode_config.funcs = &mode_config_funcs;
+	ddev->mode_config.helper_private = &mode_config_helper_funcs;
+
+	ret = tidss_dispc_modeset_init(tidss);
+	if (ret)
+		return ret;
+
+	ret = drm_vblank_init(ddev, tidss->num_crtcs);
+	if (ret)
+		return ret;
+
+	drm_mode_config_reset(ddev);
+
+	dev_dbg(tidss->dev, "%s done\n", __func__);
+
+	return 0;
+}