Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 443 insertions, 0 deletions

diff --git a/drivers/gpu/drm/tiny/ili9225.c b/drivers/gpu/drm/tiny/ili9225.c
new file mode 100644
index 000000000..815bab285
--- /dev/null
+++ b/drivers/gpu/drm/tiny/ili9225.c
@@ -0,0 +1,443 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DRM driver for Ilitek ILI9225 panels
+ *
+ * Copyright 2017 David Lechner <david@lechnology.com>
+ *
+ * Some code copied from mipi-dbi.c
+ * Copyright 2016 Noralf Trønnes
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-buf.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/spi/spi.h>
+#include <video/mipi_display.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_damage_helper.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_fb_dma_helper.h>
+#include <drm/drm_fbdev_generic.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_gem_atomic_helper.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_mipi_dbi.h>
+#include <drm/drm_rect.h>
+
+#define ILI9225_DRIVER_READ_CODE	0x00
+#define ILI9225_DRIVER_OUTPUT_CONTROL	0x01
+#define ILI9225_LCD_AC_DRIVING_CONTROL	0x02
+#define ILI9225_ENTRY_MODE		0x03
+#define ILI9225_DISPLAY_CONTROL_1	0x07
+#define ILI9225_BLANK_PERIOD_CONTROL_1	0x08
+#define ILI9225_FRAME_CYCLE_CONTROL	0x0b
+#define ILI9225_INTERFACE_CONTROL	0x0c
+#define ILI9225_OSCILLATION_CONTROL	0x0f
+#define ILI9225_POWER_CONTROL_1		0x10
+#define ILI9225_POWER_CONTROL_2		0x11
+#define ILI9225_POWER_CONTROL_3		0x12
+#define ILI9225_POWER_CONTROL_4		0x13
+#define ILI9225_POWER_CONTROL_5		0x14
+#define ILI9225_VCI_RECYCLING		0x15
+#define ILI9225_RAM_ADDRESS_SET_1	0x20
+#define ILI9225_RAM_ADDRESS_SET_2	0x21
+#define ILI9225_WRITE_DATA_TO_GRAM	0x22
+#define ILI9225_SOFTWARE_RESET		0x28
+#define ILI9225_GATE_SCAN_CONTROL	0x30
+#define ILI9225_VERTICAL_SCROLL_1	0x31
+#define ILI9225_VERTICAL_SCROLL_2	0x32
+#define ILI9225_VERTICAL_SCROLL_3	0x33
+#define ILI9225_PARTIAL_DRIVING_POS_1	0x34
+#define ILI9225_PARTIAL_DRIVING_POS_2	0x35
+#define ILI9225_HORIZ_WINDOW_ADDR_1	0x36
+#define ILI9225_HORIZ_WINDOW_ADDR_2	0x37
+#define ILI9225_VERT_WINDOW_ADDR_1	0x38
+#define ILI9225_VERT_WINDOW_ADDR_2	0x39
+#define ILI9225_GAMMA_CONTROL_1		0x50
+#define ILI9225_GAMMA_CONTROL_2		0x51
+#define ILI9225_GAMMA_CONTROL_3		0x52
+#define ILI9225_GAMMA_CONTROL_4		0x53
+#define ILI9225_GAMMA_CONTROL_5		0x54
+#define ILI9225_GAMMA_CONTROL_6		0x55
+#define ILI9225_GAMMA_CONTROL_7		0x56
+#define ILI9225_GAMMA_CONTROL_8		0x57
+#define ILI9225_GAMMA_CONTROL_9		0x58
+#define ILI9225_GAMMA_CONTROL_10	0x59
+
+static inline int ili9225_command(struct mipi_dbi *dbi, u8 cmd, u16 data)
+{
+	u8 par[2] = { data >> 8, data & 0xff };
+
+	return mipi_dbi_command_buf(dbi, cmd, par, 2);
+}
+
+static void ili9225_fb_dirty(struct drm_framebuffer *fb, struct drm_rect *rect)
+{
+	struct drm_gem_dma_object *dma_obj = drm_fb_dma_get_gem_obj(fb, 0);
+	struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(fb->dev);
+	unsigned int height = rect->y2 - rect->y1;
+	unsigned int width = rect->x2 - rect->x1;
+	struct mipi_dbi *dbi = &dbidev->dbi;
+	bool swap = dbi->swap_bytes;
+	u16 x_start, y_start;
+	u16 x1, x2, y1, y2;
+	int idx, ret = 0;
+	bool full;
+	void *tr;
+
+	if (!drm_dev_enter(fb->dev, &idx))
+		return;
+
+	full = width == fb->width && height == fb->height;
+
+	DRM_DEBUG_KMS("Flushing [FB:%d] " DRM_RECT_FMT "\n", fb->base.id, DRM_RECT_ARG(rect));
+
+	if (!dbi->dc || !full || swap ||
+	    fb->format->format == DRM_FORMAT_XRGB8888) {
+		tr = dbidev->tx_buf;
+		ret = mipi_dbi_buf_copy(dbidev->tx_buf, fb, rect, swap);
+		if (ret)
+			goto err_msg;
+	} else {
+		tr = dma_obj->vaddr;
+	}
+
+	switch (dbidev->rotation) {
+	default:
+		x1 = rect->x1;
+		x2 = rect->x2 - 1;
+		y1 = rect->y1;
+		y2 = rect->y2 - 1;
+		x_start = x1;
+		y_start = y1;
+		break;
+	case 90:
+		x1 = rect->y1;
+		x2 = rect->y2 - 1;
+		y1 = fb->width - rect->x2;
+		y2 = fb->width - rect->x1 - 1;
+		x_start = x1;
+		y_start = y2;
+		break;
+	case 180:
+		x1 = fb->width - rect->x2;
+		x2 = fb->width - rect->x1 - 1;
+		y1 = fb->height - rect->y2;
+		y2 = fb->height - rect->y1 - 1;
+		x_start = x2;
+		y_start = y2;
+		break;
+	case 270:
+		x1 = fb->height - rect->y2;
+		x2 = fb->height - rect->y1 - 1;
+		y1 = rect->x1;
+		y2 = rect->x2 - 1;
+		x_start = x2;
+		y_start = y1;
+		break;
+	}
+
+	ili9225_command(dbi, ILI9225_HORIZ_WINDOW_ADDR_1, x2);
+	ili9225_command(dbi, ILI9225_HORIZ_WINDOW_ADDR_2, x1);
+	ili9225_command(dbi, ILI9225_VERT_WINDOW_ADDR_1, y2);
+	ili9225_command(dbi, ILI9225_VERT_WINDOW_ADDR_2, y1);
+
+	ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_1, x_start);
+	ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_2, y_start);
+
+	ret = mipi_dbi_command_buf(dbi, ILI9225_WRITE_DATA_TO_GRAM, tr,
+				   width * height * 2);
+err_msg:
+	if (ret)
+		dev_err_once(fb->dev->dev, "Failed to update display %d\n", ret);
+
+	drm_dev_exit(idx);
+}
+
+static void ili9225_pipe_update(struct drm_simple_display_pipe *pipe,
+				struct drm_plane_state *old_state)
+{
+	struct drm_plane_state *state = pipe->plane.state;
+	struct drm_rect rect;
+
+	if (!pipe->crtc.state->active)
+		return;
+
+	if (drm_atomic_helper_damage_merged(old_state, state, &rect))
+		ili9225_fb_dirty(state->fb, &rect);
+}
+
+static void ili9225_pipe_enable(struct drm_simple_display_pipe *pipe,
+				struct drm_crtc_state *crtc_state,
+				struct drm_plane_state *plane_state)
+{
+	struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
+	struct drm_framebuffer *fb = plane_state->fb;
+	struct device *dev = pipe->crtc.dev->dev;
+	struct mipi_dbi *dbi = &dbidev->dbi;
+	struct drm_rect rect = {
+		.x1 = 0,
+		.x2 = fb->width,
+		.y1 = 0,
+		.y2 = fb->height,
+	};
+	int ret, idx;
+	u8 am_id;
+
+	if (!drm_dev_enter(pipe->crtc.dev, &idx))
+		return;
+
+	DRM_DEBUG_KMS("\n");
+
+	mipi_dbi_hw_reset(dbi);
+
+	/*
+	 * There don't seem to be two example init sequences that match, so
+	 * using the one from the popular Arduino library for this display.
+	 * https://github.com/Nkawu/TFT_22_ILI9225/blob/master/src/TFT_22_ILI9225.cpp
+	 */
+
+	ret = ili9225_command(dbi, ILI9225_POWER_CONTROL_1, 0x0000);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "Error sending command %d\n", ret);
+		goto out_exit;
+	}
+	ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x0000);
+	ili9225_command(dbi, ILI9225_POWER_CONTROL_3, 0x0000);
+	ili9225_command(dbi, ILI9225_POWER_CONTROL_4, 0x0000);
+	ili9225_command(dbi, ILI9225_POWER_CONTROL_5, 0x0000);
+
+	msleep(40);
+
+	ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x0018);
+	ili9225_command(dbi, ILI9225_POWER_CONTROL_3, 0x6121);
+	ili9225_command(dbi, ILI9225_POWER_CONTROL_4, 0x006f);
+	ili9225_command(dbi, ILI9225_POWER_CONTROL_5, 0x495f);
+	ili9225_command(dbi, ILI9225_POWER_CONTROL_1, 0x0800);
+
+	msleep(10);
+
+	ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x103b);
+
+	msleep(50);
+
+	switch (dbidev->rotation) {
+	default:
+		am_id = 0x30;
+		break;
+	case 90:
+		am_id = 0x18;
+		break;
+	case 180:
+		am_id = 0x00;
+		break;
+	case 270:
+		am_id = 0x28;
+		break;
+	}
+	ili9225_command(dbi, ILI9225_DRIVER_OUTPUT_CONTROL, 0x011c);
+	ili9225_command(dbi, ILI9225_LCD_AC_DRIVING_CONTROL, 0x0100);
+	ili9225_command(dbi, ILI9225_ENTRY_MODE, 0x1000 | am_id);
+	ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x0000);
+	ili9225_command(dbi, ILI9225_BLANK_PERIOD_CONTROL_1, 0x0808);
+	ili9225_command(dbi, ILI9225_FRAME_CYCLE_CONTROL, 0x1100);
+	ili9225_command(dbi, ILI9225_INTERFACE_CONTROL, 0x0000);
+	ili9225_command(dbi, ILI9225_OSCILLATION_CONTROL, 0x0d01);
+	ili9225_command(dbi, ILI9225_VCI_RECYCLING, 0x0020);
+	ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_1, 0x0000);
+	ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_2, 0x0000);
+
+	ili9225_command(dbi, ILI9225_GATE_SCAN_CONTROL, 0x0000);
+	ili9225_command(dbi, ILI9225_VERTICAL_SCROLL_1, 0x00db);
+	ili9225_command(dbi, ILI9225_VERTICAL_SCROLL_2, 0x0000);
+	ili9225_command(dbi, ILI9225_VERTICAL_SCROLL_3, 0x0000);
+	ili9225_command(dbi, ILI9225_PARTIAL_DRIVING_POS_1, 0x00db);
+	ili9225_command(dbi, ILI9225_PARTIAL_DRIVING_POS_2, 0x0000);
+
+	ili9225_command(dbi, ILI9225_GAMMA_CONTROL_1, 0x0000);
+	ili9225_command(dbi, ILI9225_GAMMA_CONTROL_2, 0x0808);
+	ili9225_command(dbi, ILI9225_GAMMA_CONTROL_3, 0x080a);
+	ili9225_command(dbi, ILI9225_GAMMA_CONTROL_4, 0x000a);
+	ili9225_command(dbi, ILI9225_GAMMA_CONTROL_5, 0x0a08);
+	ili9225_command(dbi, ILI9225_GAMMA_CONTROL_6, 0x0808);
+	ili9225_command(dbi, ILI9225_GAMMA_CONTROL_7, 0x0000);
+	ili9225_command(dbi, ILI9225_GAMMA_CONTROL_8, 0x0a00);
+	ili9225_command(dbi, ILI9225_GAMMA_CONTROL_9, 0x0710);
+	ili9225_command(dbi, ILI9225_GAMMA_CONTROL_10, 0x0710);
+
+	ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x0012);
+
+	msleep(50);
+
+	ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x1017);
+
+	ili9225_fb_dirty(fb, &rect);
+out_exit:
+	drm_dev_exit(idx);
+}
+
+static void ili9225_pipe_disable(struct drm_simple_display_pipe *pipe)
+{
+	struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
+	struct mipi_dbi *dbi = &dbidev->dbi;
+
+	DRM_DEBUG_KMS("\n");
+
+	/*
+	 * This callback is not protected by drm_dev_enter/exit since we want to
+	 * turn off the display on regular driver unload. It's highly unlikely
+	 * that the underlying SPI controller is gone should this be called after
+	 * unplug.
+	 */
+
+	ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x0000);
+	msleep(50);
+	ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x0007);
+	msleep(50);
+	ili9225_command(dbi, ILI9225_POWER_CONTROL_1, 0x0a02);
+}
+
+static int ili9225_dbi_command(struct mipi_dbi *dbi, u8 *cmd, u8 *par,
+			       size_t num)
+{
+	struct spi_device *spi = dbi->spi;
+	unsigned int bpw = 8;
+	u32 speed_hz;
+	int ret;
+
+	gpiod_set_value_cansleep(dbi->dc, 0);
+	speed_hz = mipi_dbi_spi_cmd_max_speed(spi, 1);
+	ret = mipi_dbi_spi_transfer(spi, speed_hz, 8, cmd, 1);
+	if (ret || !num)
+		return ret;
+
+	if (*cmd == ILI9225_WRITE_DATA_TO_GRAM && !dbi->swap_bytes)
+		bpw = 16;
+
+	gpiod_set_value_cansleep(dbi->dc, 1);
+	speed_hz = mipi_dbi_spi_cmd_max_speed(spi, num);
+
+	return mipi_dbi_spi_transfer(spi, speed_hz, bpw, par, num);
+}
+
+static const struct drm_simple_display_pipe_funcs ili9225_pipe_funcs = {
+	.enable		= ili9225_pipe_enable,
+	.disable	= ili9225_pipe_disable,
+	.update		= ili9225_pipe_update,
+};
+
+static const struct drm_display_mode ili9225_mode = {
+	DRM_SIMPLE_MODE(176, 220, 35, 44),
+};
+
+DEFINE_DRM_GEM_DMA_FOPS(ili9225_fops);
+
+static const struct drm_driver ili9225_driver = {
+	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
+	.fops			= &ili9225_fops,
+	DRM_GEM_DMA_DRIVER_OPS_VMAP,
+	.name			= "ili9225",
+	.desc			= "Ilitek ILI9225",
+	.date			= "20171106",
+	.major			= 1,
+	.minor			= 0,
+};
+
+static const struct of_device_id ili9225_of_match[] = {
+	{ .compatible = "vot,v220hf01a-t" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ili9225_of_match);
+
+static const struct spi_device_id ili9225_id[] = {
+	{ "v220hf01a-t", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, ili9225_id);
+
+static int ili9225_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct mipi_dbi_dev *dbidev;
+	struct drm_device *drm;
+	struct mipi_dbi *dbi;
+	struct gpio_desc *rs;
+	u32 rotation = 0;
+	int ret;
+
+	dbidev = devm_drm_dev_alloc(dev, &ili9225_driver,
+				    struct mipi_dbi_dev, drm);
+	if (IS_ERR(dbidev))
+		return PTR_ERR(dbidev);
+
+	dbi = &dbidev->dbi;
+	drm = &dbidev->drm;
+
+	dbi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(dbi->reset))
+		return dev_err_probe(dev, PTR_ERR(dbi->reset), "Failed to get GPIO 'reset'\n");
+
+	rs = devm_gpiod_get(dev, "rs", GPIOD_OUT_LOW);
+	if (IS_ERR(rs))
+		return dev_err_probe(dev, PTR_ERR(rs), "Failed to get GPIO 'rs'\n");
+
+	device_property_read_u32(dev, "rotation", &rotation);
+
+	ret = mipi_dbi_spi_init(spi, dbi, rs);
+	if (ret)
+		return ret;
+
+	/* override the command function set in  mipi_dbi_spi_init() */
+	dbi->command = ili9225_dbi_command;
+
+	ret = mipi_dbi_dev_init(dbidev, &ili9225_pipe_funcs, &ili9225_mode, rotation);
+	if (ret)
+		return ret;
+
+	drm_mode_config_reset(drm);
+
+	ret = drm_dev_register(drm, 0);
+	if (ret)
+		return ret;
+
+	spi_set_drvdata(spi, drm);
+
+	drm_fbdev_generic_setup(drm, 0);
+
+	return 0;
+}
+
+static void ili9225_remove(struct spi_device *spi)
+{
+	struct drm_device *drm = spi_get_drvdata(spi);
+
+	drm_dev_unplug(drm);
+	drm_atomic_helper_shutdown(drm);
+}
+
+static void ili9225_shutdown(struct spi_device *spi)
+{
+	drm_atomic_helper_shutdown(spi_get_drvdata(spi));
+}
+
+static struct spi_driver ili9225_spi_driver = {
+	.driver = {
+		.name = "ili9225",
+		.owner = THIS_MODULE,
+		.of_match_table = ili9225_of_match,
+	},
+	.id_table = ili9225_id,
+	.probe = ili9225_probe,
+	.remove = ili9225_remove,
+	.shutdown = ili9225_shutdown,
+};
+module_spi_driver(ili9225_spi_driver);
+
+MODULE_DESCRIPTION("Ilitek ILI9225 DRM driver");
+MODULE_AUTHOR("David Lechner <david@lechnology.com>");
+MODULE_LICENSE("GPL");