Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 532 insertions, 0 deletions

diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c
new file mode 100644
index 000000000..ea7609058
--- /dev/null
+++ b/drivers/hwmon/pmbus/max34440.c
@@ -0,0 +1,532 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for Maxim MAX34440/MAX34441
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ * Copyright (c) 2012 Guenter Roeck
+ */
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+enum chips { max34440, max34441, max34446, max34451, max34460, max34461 };
+
+#define MAX34440_MFR_VOUT_PEAK		0xd4
+#define MAX34440_MFR_IOUT_PEAK		0xd5
+#define MAX34440_MFR_TEMPERATURE_PEAK	0xd6
+#define MAX34440_MFR_VOUT_MIN		0xd7
+
+#define MAX34446_MFR_POUT_PEAK		0xe0
+#define MAX34446_MFR_POUT_AVG		0xe1
+#define MAX34446_MFR_IOUT_AVG		0xe2
+#define MAX34446_MFR_TEMPERATURE_AVG	0xe3
+
+#define MAX34440_STATUS_OC_WARN		BIT(0)
+#define MAX34440_STATUS_OC_FAULT	BIT(1)
+#define MAX34440_STATUS_OT_FAULT	BIT(5)
+#define MAX34440_STATUS_OT_WARN		BIT(6)
+
+/*
+ * The whole max344* family have IOUT_OC_WARN_LIMIT and IOUT_OC_FAULT_LIMIT
+ * swapped from the standard pmbus spec addresses.
+ */
+#define MAX34440_IOUT_OC_WARN_LIMIT	0x46
+#define MAX34440_IOUT_OC_FAULT_LIMIT	0x4A
+
+#define MAX34451_MFR_CHANNEL_CONFIG	0xe4
+#define MAX34451_MFR_CHANNEL_CONFIG_SEL_MASK	0x3f
+
+struct max34440_data {
+	int id;
+	struct pmbus_driver_info info;
+};
+
+#define to_max34440_data(x)  container_of(x, struct max34440_data, info)
+
+static const struct i2c_device_id max34440_id[];
+
+static int max34440_read_word_data(struct i2c_client *client, int page,
+				   int phase, int reg)
+{
+	int ret;
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	const struct max34440_data *data = to_max34440_data(info);
+
+	switch (reg) {
+	case PMBUS_IOUT_OC_FAULT_LIMIT:
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX34440_IOUT_OC_FAULT_LIMIT);
+		break;
+	case PMBUS_IOUT_OC_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX34440_IOUT_OC_WARN_LIMIT);
+		break;
+	case PMBUS_VIRT_READ_VOUT_MIN:
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX34440_MFR_VOUT_MIN);
+		break;
+	case PMBUS_VIRT_READ_VOUT_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX34440_MFR_VOUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_IOUT_AVG:
+		if (data->id != max34446 && data->id != max34451)
+			return -ENXIO;
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX34446_MFR_IOUT_AVG);
+		break;
+	case PMBUS_VIRT_READ_IOUT_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX34440_MFR_IOUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_POUT_AVG:
+		if (data->id != max34446)
+			return -ENXIO;
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX34446_MFR_POUT_AVG);
+		break;
+	case PMBUS_VIRT_READ_POUT_MAX:
+		if (data->id != max34446)
+			return -ENXIO;
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX34446_MFR_POUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_TEMP_AVG:
+		if (data->id != max34446 && data->id != max34460 &&
+		    data->id != max34461)
+			return -ENXIO;
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX34446_MFR_TEMPERATURE_AVG);
+		break;
+	case PMBUS_VIRT_READ_TEMP_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX34440_MFR_TEMPERATURE_PEAK);
+		break;
+	case PMBUS_VIRT_RESET_POUT_HISTORY:
+		if (data->id != max34446)
+			return -ENXIO;
+		ret = 0;
+		break;
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+		ret = 0;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int max34440_write_word_data(struct i2c_client *client, int page,
+				    int reg, u16 word)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	const struct max34440_data *data = to_max34440_data(info);
+	int ret;
+
+	switch (reg) {
+	case PMBUS_IOUT_OC_FAULT_LIMIT:
+		ret = pmbus_write_word_data(client, page, MAX34440_IOUT_OC_FAULT_LIMIT,
+					    word);
+		break;
+	case PMBUS_IOUT_OC_WARN_LIMIT:
+		ret = pmbus_write_word_data(client, page, MAX34440_IOUT_OC_WARN_LIMIT,
+					    word);
+		break;
+	case PMBUS_VIRT_RESET_POUT_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    MAX34446_MFR_POUT_PEAK, 0);
+		if (ret)
+			break;
+		ret = pmbus_write_word_data(client, page,
+					    MAX34446_MFR_POUT_AVG, 0);
+		break;
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    MAX34440_MFR_VOUT_MIN, 0x7fff);
+		if (ret)
+			break;
+		ret = pmbus_write_word_data(client, page,
+					    MAX34440_MFR_VOUT_PEAK, 0);
+		break;
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    MAX34440_MFR_IOUT_PEAK, 0);
+		if (!ret && (data->id == max34446 || data->id == max34451))
+			ret = pmbus_write_word_data(client, page,
+					MAX34446_MFR_IOUT_AVG, 0);
+
+		break;
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    MAX34440_MFR_TEMPERATURE_PEAK,
+					    0x8000);
+		if (!ret && data->id == max34446)
+			ret = pmbus_write_word_data(client, page,
+					MAX34446_MFR_TEMPERATURE_AVG, 0);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int max34440_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	int ret = 0;
+	int mfg_status;
+
+	if (page >= 0) {
+		ret = pmbus_set_page(client, page, 0xff);
+		if (ret < 0)
+			return ret;
+	}
+
+	switch (reg) {
+	case PMBUS_STATUS_IOUT:
+		mfg_status = pmbus_read_word_data(client, 0, 0xff,
+						  PMBUS_STATUS_MFR_SPECIFIC);
+		if (mfg_status < 0)
+			return mfg_status;
+		if (mfg_status & MAX34440_STATUS_OC_WARN)
+			ret |= PB_IOUT_OC_WARNING;
+		if (mfg_status & MAX34440_STATUS_OC_FAULT)
+			ret |= PB_IOUT_OC_FAULT;
+		break;
+	case PMBUS_STATUS_TEMPERATURE:
+		mfg_status = pmbus_read_word_data(client, 0, 0xff,
+						  PMBUS_STATUS_MFR_SPECIFIC);
+		if (mfg_status < 0)
+			return mfg_status;
+		if (mfg_status & MAX34440_STATUS_OT_WARN)
+			ret |= PB_TEMP_OT_WARNING;
+		if (mfg_status & MAX34440_STATUS_OT_FAULT)
+			ret |= PB_TEMP_OT_FAULT;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int max34451_set_supported_funcs(struct i2c_client *client,
+					 struct max34440_data *data)
+{
+	/*
+	 * Each of the channel 0-15 can be configured to monitor the following
+	 * functions based on MFR_CHANNEL_CONFIG[5:0]
+	 * 0x10: Sequencing + voltage monitoring (only valid for PAGES 0–11)
+	 * 0x20: Voltage monitoring (no sequencing)
+	 * 0x21: Voltage read only
+	 * 0x22: Current monitoring
+	 * 0x23: Current read only
+	 * 0x30: General-purpose input active low
+	 * 0x34: General-purpose input active high
+	 * 0x00:  Disabled
+	 */
+
+	int page, rv;
+
+	for (page = 0; page < 16; page++) {
+		rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
+		if (rv < 0)
+			return rv;
+
+		rv = i2c_smbus_read_word_data(client,
+					      MAX34451_MFR_CHANNEL_CONFIG);
+		if (rv < 0)
+			return rv;
+
+		switch (rv & MAX34451_MFR_CHANNEL_CONFIG_SEL_MASK) {
+		case 0x10:
+		case 0x20:
+			data->info.func[page] = PMBUS_HAVE_VOUT |
+				PMBUS_HAVE_STATUS_VOUT;
+			break;
+		case 0x21:
+			data->info.func[page] = PMBUS_HAVE_VOUT;
+			break;
+		case 0x22:
+			data->info.func[page] = PMBUS_HAVE_IOUT |
+				PMBUS_HAVE_STATUS_IOUT;
+			break;
+		case 0x23:
+			data->info.func[page] = PMBUS_HAVE_IOUT;
+			break;
+		default:
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static struct pmbus_driver_info max34440_info[] = {
+	[max34440] = {
+		.pages = 14,
+		.format[PSC_VOLTAGE_IN] = direct,
+		.format[PSC_VOLTAGE_OUT] = direct,
+		.format[PSC_TEMPERATURE] = direct,
+		.format[PSC_CURRENT_OUT] = direct,
+		.m[PSC_VOLTAGE_IN] = 1,
+		.b[PSC_VOLTAGE_IN] = 0,
+		.R[PSC_VOLTAGE_IN] = 3,	    /* R = 0 in datasheet reflects mV */
+		.m[PSC_VOLTAGE_OUT] = 1,
+		.b[PSC_VOLTAGE_OUT] = 0,
+		.R[PSC_VOLTAGE_OUT] = 3,    /* R = 0 in datasheet reflects mV */
+		.m[PSC_CURRENT_OUT] = 1,
+		.b[PSC_CURRENT_OUT] = 0,
+		.R[PSC_CURRENT_OUT] = 3,    /* R = 0 in datasheet reflects mA */
+		.m[PSC_TEMPERATURE] = 1,
+		.b[PSC_TEMPERATURE] = 0,
+		.R[PSC_TEMPERATURE] = 2,
+		.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[5] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[6] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[7] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[8] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[9] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[10] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[11] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[12] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[13] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.read_byte_data = max34440_read_byte_data,
+		.read_word_data = max34440_read_word_data,
+		.write_word_data = max34440_write_word_data,
+	},
+	[max34441] = {
+		.pages = 12,
+		.format[PSC_VOLTAGE_IN] = direct,
+		.format[PSC_VOLTAGE_OUT] = direct,
+		.format[PSC_TEMPERATURE] = direct,
+		.format[PSC_CURRENT_OUT] = direct,
+		.format[PSC_FAN] = direct,
+		.m[PSC_VOLTAGE_IN] = 1,
+		.b[PSC_VOLTAGE_IN] = 0,
+		.R[PSC_VOLTAGE_IN] = 3,
+		.m[PSC_VOLTAGE_OUT] = 1,
+		.b[PSC_VOLTAGE_OUT] = 0,
+		.R[PSC_VOLTAGE_OUT] = 3,
+		.m[PSC_CURRENT_OUT] = 1,
+		.b[PSC_CURRENT_OUT] = 0,
+		.R[PSC_CURRENT_OUT] = 3,
+		.m[PSC_TEMPERATURE] = 1,
+		.b[PSC_TEMPERATURE] = 0,
+		.R[PSC_TEMPERATURE] = 2,
+		.m[PSC_FAN] = 1,
+		.b[PSC_FAN] = 0,
+		.R[PSC_FAN] = 0,
+		.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[5] = PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12,
+		.func[6] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[7] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[8] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[9] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[10] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[11] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.read_byte_data = max34440_read_byte_data,
+		.read_word_data = max34440_read_word_data,
+		.write_word_data = max34440_write_word_data,
+	},
+	[max34446] = {
+		.pages = 7,
+		.format[PSC_VOLTAGE_IN] = direct,
+		.format[PSC_VOLTAGE_OUT] = direct,
+		.format[PSC_TEMPERATURE] = direct,
+		.format[PSC_CURRENT_OUT] = direct,
+		.format[PSC_POWER] = direct,
+		.m[PSC_VOLTAGE_IN] = 1,
+		.b[PSC_VOLTAGE_IN] = 0,
+		.R[PSC_VOLTAGE_IN] = 3,
+		.m[PSC_VOLTAGE_OUT] = 1,
+		.b[PSC_VOLTAGE_OUT] = 0,
+		.R[PSC_VOLTAGE_OUT] = 3,
+		.m[PSC_CURRENT_OUT] = 1,
+		.b[PSC_CURRENT_OUT] = 0,
+		.R[PSC_CURRENT_OUT] = 3,
+		.m[PSC_POWER] = 1,
+		.b[PSC_POWER] = 0,
+		.R[PSC_POWER] = 3,
+		.m[PSC_TEMPERATURE] = 1,
+		.b[PSC_TEMPERATURE] = 0,
+		.R[PSC_TEMPERATURE] = 2,
+		.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT,
+		.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT,
+		.func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[4] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[5] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[6] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.read_byte_data = max34440_read_byte_data,
+		.read_word_data = max34440_read_word_data,
+		.write_word_data = max34440_write_word_data,
+	},
+	[max34451] = {
+		.pages = 21,
+		.format[PSC_VOLTAGE_OUT] = direct,
+		.format[PSC_TEMPERATURE] = direct,
+		.format[PSC_CURRENT_OUT] = direct,
+		.m[PSC_VOLTAGE_OUT] = 1,
+		.b[PSC_VOLTAGE_OUT] = 0,
+		.R[PSC_VOLTAGE_OUT] = 3,
+		.m[PSC_CURRENT_OUT] = 1,
+		.b[PSC_CURRENT_OUT] = 0,
+		.R[PSC_CURRENT_OUT] = 2,
+		.m[PSC_TEMPERATURE] = 1,
+		.b[PSC_TEMPERATURE] = 0,
+		.R[PSC_TEMPERATURE] = 2,
+		/* func 0-15 is set dynamically before probing */
+		.func[16] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[17] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[18] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[19] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[20] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.read_word_data = max34440_read_word_data,
+		.write_word_data = max34440_write_word_data,
+	},
+	[max34460] = {
+		.pages = 18,
+		.format[PSC_VOLTAGE_OUT] = direct,
+		.format[PSC_TEMPERATURE] = direct,
+		.m[PSC_VOLTAGE_OUT] = 1,
+		.b[PSC_VOLTAGE_OUT] = 0,
+		.R[PSC_VOLTAGE_OUT] = 3,
+		.m[PSC_TEMPERATURE] = 1,
+		.b[PSC_TEMPERATURE] = 0,
+		.R[PSC_TEMPERATURE] = 2,
+		.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[5] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[6] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[7] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[8] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[9] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[10] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[11] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[13] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[14] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[15] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[16] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[17] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.read_word_data = max34440_read_word_data,
+		.write_word_data = max34440_write_word_data,
+	},
+	[max34461] = {
+		.pages = 23,
+		.format[PSC_VOLTAGE_OUT] = direct,
+		.format[PSC_TEMPERATURE] = direct,
+		.m[PSC_VOLTAGE_OUT] = 1,
+		.b[PSC_VOLTAGE_OUT] = 0,
+		.R[PSC_VOLTAGE_OUT] = 3,
+		.m[PSC_TEMPERATURE] = 1,
+		.b[PSC_TEMPERATURE] = 0,
+		.R[PSC_TEMPERATURE] = 2,
+		.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[5] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[6] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[7] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[8] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[9] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[10] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[11] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[12] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[13] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[14] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[15] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		/* page 16 is reserved */
+		.func[17] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[18] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[19] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[20] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[21] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.read_word_data = max34440_read_word_data,
+		.write_word_data = max34440_write_word_data,
+	},
+};
+
+static int max34440_probe(struct i2c_client *client)
+{
+	struct max34440_data *data;
+	int rv;
+
+	data = devm_kzalloc(&client->dev, sizeof(struct max34440_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+	data->id = i2c_match_id(max34440_id, client)->driver_data;
+	data->info = max34440_info[data->id];
+
+	if (data->id == max34451) {
+		rv = max34451_set_supported_funcs(client, data);
+		if (rv)
+			return rv;
+	}
+
+	return pmbus_do_probe(client, &data->info);
+}
+
+static const struct i2c_device_id max34440_id[] = {
+	{"max34440", max34440},
+	{"max34441", max34441},
+	{"max34446", max34446},
+	{"max34451", max34451},
+	{"max34460", max34460},
+	{"max34461", max34461},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, max34440_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver max34440_driver = {
+	.driver = {
+		   .name = "max34440",
+		   },
+	.probe_new = max34440_probe,
+	.id_table = max34440_id,
+};
+
+module_i2c_driver(max34440_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for Maxim MAX34440/MAX34441");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);