Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 204 insertions, 0 deletions

diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
new file mode 100644
index 000000000..45c1eb5df
--- /dev/null
+++ b/drivers/hwtracing/coresight/Kconfig
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Coresight configuration
+#
+menuconfig CORESIGHT
+	tristate "CoreSight Tracing Support"
+	depends on ARM || ARM64
+	depends on OF || ACPI
+	select ARM_AMBA
+	select PERF_EVENTS
+	select CONFIGFS_FS
+	help
+	  This framework provides a kernel interface for the CoreSight debug
+	  and trace drivers to register themselves with. It's intended to build
+	  a topological view of the CoreSight components based on a DT
+	  specification and configure the right series of components when a
+	  trace source gets enabled.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called coresight.
+
+if CORESIGHT
+config CORESIGHT_LINKS_AND_SINKS
+	tristate "CoreSight Link and Sink drivers"
+	help
+	  This enables support for CoreSight link and sink drivers that are
+	  responsible for transporting and collecting the trace data
+	  respectively.  Link and sinks are dynamically aggregated with a trace
+	  entity at run time to form a complete trace path.
+
+	  To compile these drivers as modules, choose M here: the
+	  modules will be called coresight-funnel and coresight-replicator.
+
+config CORESIGHT_LINK_AND_SINK_TMC
+	tristate "Coresight generic TMC driver"
+
+	depends on CORESIGHT_LINKS_AND_SINKS
+	help
+	  This enables support for the Trace Memory Controller driver.
+	  Depending on its configuration the device can act as a link (embedded
+	  trace router - ETR) or sink (embedded trace FIFO).  The driver
+	  complies with the generic implementation of the component without
+	  special enhancement or added features.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called coresight-tmc.
+
+config CORESIGHT_CATU
+	tristate "Coresight Address Translation Unit (CATU) driver"
+	depends on CORESIGHT_LINK_AND_SINK_TMC
+	help
+	   Enable support for the Coresight Address Translation Unit (CATU).
+	   CATU supports a scatter gather table of 4K pages, with forward/backward
+	   lookup. CATU helps TMC ETR to use a large physically non-contiguous trace
+	   buffer by translating the addresses used by ETR to the physical address
+	   by looking up the provided table. CATU can also be used in pass-through
+	   mode where the address is not translated.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called coresight-catu.
+
+config CORESIGHT_SINK_TPIU
+	tristate "Coresight generic TPIU driver"
+	depends on CORESIGHT_LINKS_AND_SINKS
+	help
+	  This enables support for the Trace Port Interface Unit driver,
+	  responsible for bridging the gap between the on-chip coresight
+	  components and a trace for bridging the gap between the on-chip
+	  coresight components and a trace port collection engine, typically
+	  connected to an external host for use case capturing more traces than
+	  the on-board coresight memory can handle.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called coresight-tpiu.
+
+config CORESIGHT_SINK_ETBV10
+	tristate "Coresight ETBv1.0 driver"
+	depends on CORESIGHT_LINKS_AND_SINKS
+	help
+	  This enables support for the Embedded Trace Buffer version 1.0 driver
+	  that complies with the generic implementation of the component without
+	  special enhancement or added features.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called coresight-etb10.
+
+config CORESIGHT_SOURCE_ETM3X
+	tristate "CoreSight Embedded Trace Macrocell 3.x driver"
+	depends on !ARM64
+	select CORESIGHT_LINKS_AND_SINKS
+	help
+	  This driver provides support for processor ETM3.x and PTM1.x modules,
+	  which allows tracing the instructions that a processor is executing
+	  This is primarily useful for instruction level tracing.  Depending
+	  the ETM version data tracing may also be available.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called coresight-etm3x.
+
+config CORESIGHT_SOURCE_ETM4X
+	tristate "CoreSight ETMv4.x / ETE driver"
+	depends on ARM64
+	select CORESIGHT_LINKS_AND_SINKS
+	select PID_IN_CONTEXTIDR
+	help
+	  This driver provides support for the CoreSight Embedded Trace Macrocell
+	  version 4.x and the Embedded Trace Extensions (ETE). Both are CPU tracer
+	  modules, tracing the instructions that a processor is executing. This is
+	  primarily useful for instruction level tracing.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called coresight-etm4x.
+
+config ETM4X_IMPDEF_FEATURE
+	bool "Control implementation defined overflow support in ETM 4.x driver"
+	depends on CORESIGHT_SOURCE_ETM4X
+	help
+	  This control provides implementation define control for CoreSight
+	  ETM 4.x tracer module that can't reduce commit rate automatically.
+	  This avoids overflow between the ETM tracer module and the cpu core.
+
+config CORESIGHT_STM
+	tristate "CoreSight System Trace Macrocell driver"
+	depends on (ARM && !(CPU_32v3 || CPU_32v4 || CPU_32v4T)) || ARM64
+	select CORESIGHT_LINKS_AND_SINKS
+	select STM
+	help
+	  This driver provides support for hardware assisted software
+	  instrumentation based tracing. This is primarily used for
+	  logging useful software events or data coming from various entities
+	  in the system, possibly running different OSs
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called coresight-stm.
+
+config CORESIGHT_CPU_DEBUG
+	tristate "CoreSight CPU Debug driver"
+	depends on ARM || ARM64
+	depends on DEBUG_FS
+	help
+	  This driver provides support for coresight debugging module. This
+	  is primarily used to dump sample-based profiling registers when
+	  system triggers panic, the driver will parse context registers so
+	  can quickly get to know program counter (PC), secure state,
+	  exception level, etc. Before use debugging functionality, platform
+	  needs to ensure the clock domain and power domain are enabled
+	  properly, please refer Documentation/trace/coresight/coresight-cpu-debug.rst
+	  for detailed description and the example for usage.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called coresight-cpu-debug.
+
+config CORESIGHT_CPU_DEBUG_DEFAULT_ON
+	bool "Enable CoreSight CPU Debug by default"
+	depends on CORESIGHT_CPU_DEBUG
+	help
+	  Say Y here to enable the CoreSight Debug panic-debug by default. This
+	  can also be enabled via debugfs, but this ensures the debug feature
+	  is enabled as early as possible.
+
+	  Has the same effect as setting coresight_cpu_debug.enable=1 on the
+	  kernel command line.
+
+	  Say N if unsure.
+
+config CORESIGHT_CTI
+	tristate "CoreSight Cross Trigger Interface (CTI) driver"
+	depends on ARM || ARM64
+	help
+	  This driver provides support for CoreSight CTI and CTM components.
+	  These provide hardware triggering events between CoreSight trace
+	  source and sink components. These can be used to halt trace or
+	  inject events into the trace stream. CTI also provides a software
+	  control to trigger the same halt events. This can provide fast trace
+	  halt compared to disabling sources and sinks normally in driver
+	  software.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called coresight-cti.
+
+config CORESIGHT_CTI_INTEGRATION_REGS
+	bool "Access CTI CoreSight Integration Registers"
+	depends on CORESIGHT_CTI
+	help
+	  This option adds support for the CoreSight integration registers on
+	  this device. The integration registers allow the exploration of the
+	  CTI trigger connections between this and other devices.These
+	  registers are not used in normal operation and can leave devices in
+	  an inconsistent state.
+
+config CORESIGHT_TRBE
+	tristate "Trace Buffer Extension (TRBE) driver"
+	depends on ARM64 && CORESIGHT_SOURCE_ETM4X
+	help
+	  This driver provides support for percpu Trace Buffer Extension (TRBE).
+	  TRBE always needs to be used along with its corresponding percpu ETE
+	  component. ETE generates trace data which is then captured with TRBE.
+	  Unlike traditional sink devices, TRBE is a CPU feature accessible via
+	  system registers. But its explicit dependency with trace unit (ETE)
+	  requires it to be plugged in as a coresight sink device.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called coresight-trbe.
+endif