Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 792 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
new file mode 100644
index 000000000..50f21cdbe
--- /dev/null
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -0,0 +1,792 @@
+/*
+ * Provides I2C support for Philips PNX010x/PNX4008 boards.
+ *
+ * Authors: Dennis Kovalev <dkovalev@ru.mvista.com>
+ *	    Vitaly Wool <vwool@ru.mvista.com>
+ *
+ * 2004-2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#define I2C_PNX_TIMEOUT_DEFAULT		10 /* msec */
+#define I2C_PNX_SPEED_KHZ_DEFAULT	100
+#define I2C_PNX_REGION_SIZE		0x100
+
+struct i2c_pnx_mif {
+	int			ret;		/* Return value */
+	int			mode;		/* Interface mode */
+	struct completion	complete;	/* I/O completion */
+	struct timer_list	timer;		/* Timeout */
+	u8 *			buf;		/* Data buffer */
+	int			len;		/* Length of data buffer */
+	int			order;		/* RX Bytes to order via TX */
+};
+
+struct i2c_pnx_algo_data {
+	void __iomem		*ioaddr;
+	struct i2c_pnx_mif	mif;
+	int			last;
+	struct clk		*clk;
+	struct i2c_adapter	adapter;
+	int			irq;
+	u32			timeout;
+};
+
+enum {
+	mstatus_tdi = 0x00000001,
+	mstatus_afi = 0x00000002,
+	mstatus_nai = 0x00000004,
+	mstatus_drmi = 0x00000008,
+	mstatus_active = 0x00000020,
+	mstatus_scl = 0x00000040,
+	mstatus_sda = 0x00000080,
+	mstatus_rff = 0x00000100,
+	mstatus_rfe = 0x00000200,
+	mstatus_tff = 0x00000400,
+	mstatus_tfe = 0x00000800,
+};
+
+enum {
+	mcntrl_tdie = 0x00000001,
+	mcntrl_afie = 0x00000002,
+	mcntrl_naie = 0x00000004,
+	mcntrl_drmie = 0x00000008,
+	mcntrl_drsie = 0x00000010,
+	mcntrl_rffie = 0x00000020,
+	mcntrl_daie = 0x00000040,
+	mcntrl_tffie = 0x00000080,
+	mcntrl_reset = 0x00000100,
+	mcntrl_cdbmode = 0x00000400,
+};
+
+enum {
+	rw_bit = 1 << 0,
+	start_bit = 1 << 8,
+	stop_bit = 1 << 9,
+};
+
+#define I2C_REG_RX(a)	((a)->ioaddr)		/* Rx FIFO reg (RO) */
+#define I2C_REG_TX(a)	((a)->ioaddr)		/* Tx FIFO reg (WO) */
+#define I2C_REG_STS(a)	((a)->ioaddr + 0x04)	/* Status reg (RO) */
+#define I2C_REG_CTL(a)	((a)->ioaddr + 0x08)	/* Ctl reg */
+#define I2C_REG_CKL(a)	((a)->ioaddr + 0x0c)	/* Clock divider low */
+#define I2C_REG_CKH(a)	((a)->ioaddr + 0x10)	/* Clock divider high */
+#define I2C_REG_ADR(a)	((a)->ioaddr + 0x14)	/* I2C address */
+#define I2C_REG_RFL(a)	((a)->ioaddr + 0x18)	/* Rx FIFO level (RO) */
+#define I2C_REG_TFL(a)	((a)->ioaddr + 0x1c)	/* Tx FIFO level (RO) */
+#define I2C_REG_RXB(a)	((a)->ioaddr + 0x20)	/* Num of bytes Rx-ed (RO) */
+#define I2C_REG_TXB(a)	((a)->ioaddr + 0x24)	/* Num of bytes Tx-ed (RO) */
+#define I2C_REG_TXS(a)	((a)->ioaddr + 0x28)	/* Tx slave FIFO (RO) */
+#define I2C_REG_STFL(a)	((a)->ioaddr + 0x2c)	/* Tx slave FIFO level (RO) */
+
+static inline int wait_timeout(struct i2c_pnx_algo_data *data)
+{
+	long timeout = data->timeout;
+	while (timeout > 0 &&
+			(ioread32(I2C_REG_STS(data)) & mstatus_active)) {
+		mdelay(1);
+		timeout--;
+	}
+	return (timeout <= 0);
+}
+
+static inline int wait_reset(struct i2c_pnx_algo_data *data)
+{
+	long timeout = data->timeout;
+	while (timeout > 0 &&
+			(ioread32(I2C_REG_CTL(data)) & mcntrl_reset)) {
+		mdelay(1);
+		timeout--;
+	}
+	return (timeout <= 0);
+}
+
+static inline void i2c_pnx_arm_timer(struct i2c_pnx_algo_data *alg_data)
+{
+	struct timer_list *timer = &alg_data->mif.timer;
+	unsigned long expires = msecs_to_jiffies(alg_data->timeout);
+
+	if (expires <= 1)
+		expires = 2;
+
+	del_timer_sync(timer);
+
+	dev_dbg(&alg_data->adapter.dev, "Timer armed at %lu plus %lu jiffies.\n",
+		jiffies, expires);
+
+	timer->expires = jiffies + expires;
+
+	add_timer(timer);
+}
+
+/**
+ * i2c_pnx_start - start a device
+ * @slave_addr:		slave address
+ * @alg_data:		pointer to local driver data structure
+ *
+ * Generate a START signal in the desired mode.
+ */
+static int i2c_pnx_start(unsigned char slave_addr,
+	struct i2c_pnx_algo_data *alg_data)
+{
+	dev_dbg(&alg_data->adapter.dev, "%s(): addr 0x%x mode %d\n", __func__,
+		slave_addr, alg_data->mif.mode);
+
+	/* Check for 7 bit slave addresses only */
+	if (slave_addr & ~0x7f) {
+		dev_err(&alg_data->adapter.dev,
+			"%s: Invalid slave address %x. Only 7-bit addresses are supported\n",
+			alg_data->adapter.name, slave_addr);
+		return -EINVAL;
+	}
+
+	/* First, make sure bus is idle */
+	if (wait_timeout(alg_data)) {
+		/* Somebody else is monopolizing the bus */
+		dev_err(&alg_data->adapter.dev,
+			"%s: Bus busy. Slave addr = %02x, cntrl = %x, stat = %x\n",
+			alg_data->adapter.name, slave_addr,
+			ioread32(I2C_REG_CTL(alg_data)),
+			ioread32(I2C_REG_STS(alg_data)));
+		return -EBUSY;
+	} else if (ioread32(I2C_REG_STS(alg_data)) & mstatus_afi) {
+		/* Sorry, we lost the bus */
+		dev_err(&alg_data->adapter.dev,
+		        "%s: Arbitration failure. Slave addr = %02x\n",
+			alg_data->adapter.name, slave_addr);
+		return -EIO;
+	}
+
+	/*
+	 * OK, I2C is enabled and we have the bus.
+	 * Clear the current TDI and AFI status flags.
+	 */
+	iowrite32(ioread32(I2C_REG_STS(alg_data)) | mstatus_tdi | mstatus_afi,
+		  I2C_REG_STS(alg_data));
+
+	dev_dbg(&alg_data->adapter.dev, "%s(): sending %#x\n", __func__,
+		(slave_addr << 1) | start_bit | alg_data->mif.mode);
+
+	/* Write the slave address, START bit and R/W bit */
+	iowrite32((slave_addr << 1) | start_bit | alg_data->mif.mode,
+		  I2C_REG_TX(alg_data));
+
+	dev_dbg(&alg_data->adapter.dev, "%s(): exit\n", __func__);
+
+	return 0;
+}
+
+/**
+ * i2c_pnx_stop - stop a device
+ * @alg_data:		pointer to local driver data structure
+ *
+ * Generate a STOP signal to terminate the master transaction.
+ */
+static void i2c_pnx_stop(struct i2c_pnx_algo_data *alg_data)
+{
+	/* Only 1 msec max timeout due to interrupt context */
+	long timeout = 1000;
+
+	dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n",
+		__func__, ioread32(I2C_REG_STS(alg_data)));
+
+	/* Write a STOP bit to TX FIFO */
+	iowrite32(0xff | stop_bit, I2C_REG_TX(alg_data));
+
+	/* Wait until the STOP is seen. */
+	while (timeout > 0 &&
+	       (ioread32(I2C_REG_STS(alg_data)) & mstatus_active)) {
+		/* may be called from interrupt context */
+		udelay(1);
+		timeout--;
+	}
+
+	dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n",
+		__func__, ioread32(I2C_REG_STS(alg_data)));
+}
+
+/**
+ * i2c_pnx_master_xmit - transmit data to slave
+ * @alg_data:		pointer to local driver data structure
+ *
+ * Sends one byte of data to the slave
+ */
+static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data)
+{
+	u32 val;
+
+	dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n",
+		__func__, ioread32(I2C_REG_STS(alg_data)));
+
+	if (alg_data->mif.len > 0) {
+		/* We still have something to talk about... */
+		val = *alg_data->mif.buf++;
+
+		if (alg_data->mif.len == 1)
+			val |= stop_bit;
+
+		alg_data->mif.len--;
+		iowrite32(val, I2C_REG_TX(alg_data));
+
+		dev_dbg(&alg_data->adapter.dev, "%s(): xmit %#x [%d]\n",
+			__func__, val, alg_data->mif.len + 1);
+
+		if (alg_data->mif.len == 0) {
+			if (alg_data->last) {
+				/* Wait until the STOP is seen. */
+				if (wait_timeout(alg_data))
+					dev_err(&alg_data->adapter.dev,
+						"The bus is still active after timeout\n");
+			}
+			/* Disable master interrupts */
+			iowrite32(ioread32(I2C_REG_CTL(alg_data)) &
+				~(mcntrl_afie | mcntrl_naie | mcntrl_drmie),
+				  I2C_REG_CTL(alg_data));
+
+			del_timer_sync(&alg_data->mif.timer);
+
+			dev_dbg(&alg_data->adapter.dev,
+				"%s(): Waking up xfer routine.\n",
+				__func__);
+
+			complete(&alg_data->mif.complete);
+		}
+	} else if (alg_data->mif.len == 0) {
+		/* zero-sized transfer */
+		i2c_pnx_stop(alg_data);
+
+		/* Disable master interrupts. */
+		iowrite32(ioread32(I2C_REG_CTL(alg_data)) &
+			~(mcntrl_afie | mcntrl_naie | mcntrl_drmie),
+			  I2C_REG_CTL(alg_data));
+
+		/* Stop timer. */
+		del_timer_sync(&alg_data->mif.timer);
+		dev_dbg(&alg_data->adapter.dev,
+			"%s(): Waking up xfer routine after zero-xfer.\n",
+			__func__);
+
+		complete(&alg_data->mif.complete);
+	}
+
+	dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n",
+		__func__, ioread32(I2C_REG_STS(alg_data)));
+
+	return 0;
+}
+
+/**
+ * i2c_pnx_master_rcv - receive data from slave
+ * @alg_data:		pointer to local driver data structure
+ *
+ * Reads one byte data from the slave
+ */
+static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data)
+{
+	unsigned int val = 0;
+	u32 ctl = 0;
+
+	dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n",
+		__func__, ioread32(I2C_REG_STS(alg_data)));
+
+	/* Check, whether there is already data,
+	 * or we didn't 'ask' for it yet.
+	 */
+	if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) {
+		/* 'Asking' is done asynchronously, e.g. dummy TX of several
+		 * bytes is done before the first actual RX arrives in FIFO.
+		 * Therefore, ordered bytes (via TX) are counted separately.
+		 */
+		if (alg_data->mif.order) {
+			dev_dbg(&alg_data->adapter.dev,
+				"%s(): Write dummy data to fill Rx-fifo...\n",
+				__func__);
+
+			if (alg_data->mif.order == 1) {
+				/* Last byte, do not acknowledge next rcv. */
+				val |= stop_bit;
+
+				/*
+				 * Enable interrupt RFDAIE (data in Rx fifo),
+				 * and disable DRMIE (need data for Tx)
+				 */
+				ctl = ioread32(I2C_REG_CTL(alg_data));
+				ctl |= mcntrl_rffie | mcntrl_daie;
+				ctl &= ~mcntrl_drmie;
+				iowrite32(ctl, I2C_REG_CTL(alg_data));
+			}
+
+			/*
+			 * Now we'll 'ask' for data:
+			 * For each byte we want to receive, we must
+			 * write a (dummy) byte to the Tx-FIFO.
+			 */
+			iowrite32(val, I2C_REG_TX(alg_data));
+			alg_data->mif.order--;
+		}
+		return 0;
+	}
+
+	/* Handle data. */
+	if (alg_data->mif.len > 0) {
+		val = ioread32(I2C_REG_RX(alg_data));
+		*alg_data->mif.buf++ = (u8) (val & 0xff);
+		dev_dbg(&alg_data->adapter.dev, "%s(): rcv 0x%x [%d]\n",
+			__func__, val, alg_data->mif.len);
+
+		alg_data->mif.len--;
+		if (alg_data->mif.len == 0) {
+			if (alg_data->last)
+				/* Wait until the STOP is seen. */
+				if (wait_timeout(alg_data))
+					dev_err(&alg_data->adapter.dev,
+						"The bus is still active after timeout\n");
+
+			/* Disable master interrupts */
+			ctl = ioread32(I2C_REG_CTL(alg_data));
+			ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie |
+				 mcntrl_drmie | mcntrl_daie);
+			iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+			/* Kill timer. */
+			del_timer_sync(&alg_data->mif.timer);
+			complete(&alg_data->mif.complete);
+		}
+	}
+
+	dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n",
+		__func__, ioread32(I2C_REG_STS(alg_data)));
+
+	return 0;
+}
+
+static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
+{
+	struct i2c_pnx_algo_data *alg_data = dev_id;
+	u32 stat, ctl;
+
+	dev_dbg(&alg_data->adapter.dev,
+		"%s(): mstat = %x mctrl = %x, mode = %d\n",
+		__func__,
+		ioread32(I2C_REG_STS(alg_data)),
+		ioread32(I2C_REG_CTL(alg_data)),
+		alg_data->mif.mode);
+	stat = ioread32(I2C_REG_STS(alg_data));
+
+	/* let's see what kind of event this is */
+	if (stat & mstatus_afi) {
+		/* We lost arbitration in the midst of a transfer */
+		alg_data->mif.ret = -EIO;
+
+		/* Disable master interrupts. */
+		ctl = ioread32(I2C_REG_CTL(alg_data));
+		ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie |
+			 mcntrl_drmie);
+		iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+		/* Stop timer, to prevent timeout. */
+		del_timer_sync(&alg_data->mif.timer);
+		complete(&alg_data->mif.complete);
+	} else if (stat & mstatus_nai) {
+		/* Slave did not acknowledge, generate a STOP */
+		dev_dbg(&alg_data->adapter.dev,
+			"%s(): Slave did not acknowledge, generating a STOP.\n",
+			__func__);
+		i2c_pnx_stop(alg_data);
+
+		/* Disable master interrupts. */
+		ctl = ioread32(I2C_REG_CTL(alg_data));
+		ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie |
+			 mcntrl_drmie);
+		iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+		/* Our return value. */
+		alg_data->mif.ret = -EIO;
+
+		/* Stop timer, to prevent timeout. */
+		del_timer_sync(&alg_data->mif.timer);
+		complete(&alg_data->mif.complete);
+	} else {
+		/*
+		 * Two options:
+		 * - Master Tx needs data.
+		 * - There is data in the Rx-fifo
+		 * The latter is only the case if we have requested for data,
+		 * via a dummy write. (See 'i2c_pnx_master_rcv'.)
+		 * We therefore check, as a sanity check, whether that interrupt
+		 * has been enabled.
+		 */
+		if ((stat & mstatus_drmi) || !(stat & mstatus_rfe)) {
+			if (alg_data->mif.mode == I2C_SMBUS_WRITE) {
+				i2c_pnx_master_xmit(alg_data);
+			} else if (alg_data->mif.mode == I2C_SMBUS_READ) {
+				i2c_pnx_master_rcv(alg_data);
+			}
+		}
+	}
+
+	/* Clear TDI and AFI bits */
+	stat = ioread32(I2C_REG_STS(alg_data));
+	iowrite32(stat | mstatus_tdi | mstatus_afi, I2C_REG_STS(alg_data));
+
+	dev_dbg(&alg_data->adapter.dev,
+		"%s(): exiting, stat = %x ctrl = %x.\n",
+		 __func__, ioread32(I2C_REG_STS(alg_data)),
+		 ioread32(I2C_REG_CTL(alg_data)));
+
+	return IRQ_HANDLED;
+}
+
+static void i2c_pnx_timeout(struct timer_list *t)
+{
+	struct i2c_pnx_algo_data *alg_data = from_timer(alg_data, t, mif.timer);
+	u32 ctl;
+
+	dev_err(&alg_data->adapter.dev,
+		"Master timed out. stat = %04x, cntrl = %04x. Resetting master...\n",
+		ioread32(I2C_REG_STS(alg_data)),
+		ioread32(I2C_REG_CTL(alg_data)));
+
+	/* Reset master and disable interrupts */
+	ctl = ioread32(I2C_REG_CTL(alg_data));
+	ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie | mcntrl_drmie);
+	iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+	ctl |= mcntrl_reset;
+	iowrite32(ctl, I2C_REG_CTL(alg_data));
+	wait_reset(alg_data);
+	alg_data->mif.ret = -EIO;
+	complete(&alg_data->mif.complete);
+}
+
+static inline void bus_reset_if_active(struct i2c_pnx_algo_data *alg_data)
+{
+	u32 stat;
+
+	if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_active) {
+		dev_err(&alg_data->adapter.dev,
+			"%s: Bus is still active after xfer. Reset it...\n",
+			alg_data->adapter.name);
+		iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
+			  I2C_REG_CTL(alg_data));
+		wait_reset(alg_data);
+	} else if (!(stat & mstatus_rfe) || !(stat & mstatus_tfe)) {
+		/* If there is data in the fifo's after transfer,
+		 * flush fifo's by reset.
+		 */
+		iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
+			  I2C_REG_CTL(alg_data));
+		wait_reset(alg_data);
+	} else if (stat & mstatus_nai) {
+		iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
+			  I2C_REG_CTL(alg_data));
+		wait_reset(alg_data);
+	}
+}
+
+/**
+ * i2c_pnx_xfer - generic transfer entry point
+ * @adap:		pointer to I2C adapter structure
+ * @msgs:		array of messages
+ * @num:		number of messages
+ *
+ * Initiates the transfer
+ */
+static int
+i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+	struct i2c_msg *pmsg;
+	int rc = 0, completed = 0, i;
+	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+	u32 stat;
+
+	dev_dbg(&alg_data->adapter.dev,
+		"%s(): entering: %d messages, stat = %04x.\n",
+		__func__, num, ioread32(I2C_REG_STS(alg_data)));
+
+	bus_reset_if_active(alg_data);
+
+	/* Process transactions in a loop. */
+	for (i = 0; rc >= 0 && i < num; i++) {
+		u8 addr;
+
+		pmsg = &msgs[i];
+		addr = pmsg->addr;
+
+		if (pmsg->flags & I2C_M_TEN) {
+			dev_err(&alg_data->adapter.dev,
+				"%s: 10 bits addr not supported!\n",
+				alg_data->adapter.name);
+			rc = -EINVAL;
+			break;
+		}
+
+		alg_data->mif.buf = pmsg->buf;
+		alg_data->mif.len = pmsg->len;
+		alg_data->mif.order = pmsg->len;
+		alg_data->mif.mode = (pmsg->flags & I2C_M_RD) ?
+			I2C_SMBUS_READ : I2C_SMBUS_WRITE;
+		alg_data->mif.ret = 0;
+		alg_data->last = (i == num - 1);
+
+		dev_dbg(&alg_data->adapter.dev, "%s(): mode %d, %d bytes\n",
+			__func__, alg_data->mif.mode, alg_data->mif.len);
+
+		i2c_pnx_arm_timer(alg_data);
+
+		/* initialize the completion var */
+		init_completion(&alg_data->mif.complete);
+
+		/* Enable master interrupt */
+		iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_afie |
+				mcntrl_naie | mcntrl_drmie,
+			  I2C_REG_CTL(alg_data));
+
+		/* Put start-code and slave-address on the bus. */
+		rc = i2c_pnx_start(addr, alg_data);
+		if (rc < 0)
+			break;
+
+		/* Wait for completion */
+		wait_for_completion(&alg_data->mif.complete);
+
+		if (!(rc = alg_data->mif.ret))
+			completed++;
+		dev_dbg(&alg_data->adapter.dev,
+			"%s(): Complete, return code = %d.\n",
+			__func__, rc);
+
+		/* Clear TDI and AFI bits in case they are set. */
+		if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_tdi) {
+			dev_dbg(&alg_data->adapter.dev,
+				"%s: TDI still set... clearing now.\n",
+				alg_data->adapter.name);
+			iowrite32(stat, I2C_REG_STS(alg_data));
+		}
+		if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_afi) {
+			dev_dbg(&alg_data->adapter.dev,
+				"%s: AFI still set... clearing now.\n",
+				alg_data->adapter.name);
+			iowrite32(stat, I2C_REG_STS(alg_data));
+		}
+	}
+
+	bus_reset_if_active(alg_data);
+
+	/* Cleanup to be sure... */
+	alg_data->mif.buf = NULL;
+	alg_data->mif.len = 0;
+	alg_data->mif.order = 0;
+
+	dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x\n",
+		__func__, ioread32(I2C_REG_STS(alg_data)));
+
+	if (completed != num)
+		return ((rc < 0) ? rc : -EREMOTEIO);
+
+	return num;
+}
+
+static u32 i2c_pnx_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm pnx_algorithm = {
+	.master_xfer = i2c_pnx_xfer,
+	.functionality = i2c_pnx_func,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int i2c_pnx_controller_suspend(struct device *dev)
+{
+	struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(alg_data->clk);
+
+	return 0;
+}
+
+static int i2c_pnx_controller_resume(struct device *dev)
+{
+	struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev);
+
+	return clk_prepare_enable(alg_data->clk);
+}
+
+static SIMPLE_DEV_PM_OPS(i2c_pnx_pm,
+			 i2c_pnx_controller_suspend, i2c_pnx_controller_resume);
+#define PNX_I2C_PM	(&i2c_pnx_pm)
+#else
+#define PNX_I2C_PM	NULL
+#endif
+
+static int i2c_pnx_probe(struct platform_device *pdev)
+{
+	unsigned long tmp;
+	int ret = 0;
+	struct i2c_pnx_algo_data *alg_data;
+	unsigned long freq;
+	struct resource *res;
+	u32 speed = I2C_PNX_SPEED_KHZ_DEFAULT * 1000;
+
+	alg_data = devm_kzalloc(&pdev->dev, sizeof(*alg_data), GFP_KERNEL);
+	if (!alg_data)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, alg_data);
+
+	alg_data->adapter.dev.parent = &pdev->dev;
+	alg_data->adapter.algo = &pnx_algorithm;
+	alg_data->adapter.algo_data = alg_data;
+	alg_data->adapter.nr = pdev->id;
+
+	alg_data->timeout = I2C_PNX_TIMEOUT_DEFAULT;
+#ifdef CONFIG_OF
+	alg_data->adapter.dev.of_node = of_node_get(pdev->dev.of_node);
+	if (pdev->dev.of_node) {
+		of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+				     &speed);
+		/*
+		 * At this point, it is planned to add an OF timeout property.
+		 * As soon as there is a consensus about how to call and handle
+		 * this, sth. like the following can be put here:
+		 *
+		 * of_property_read_u32(pdev->dev.of_node, "timeout",
+		 *                      &alg_data->timeout);
+		 */
+	}
+#endif
+	alg_data->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(alg_data->clk))
+		return PTR_ERR(alg_data->clk);
+
+	timer_setup(&alg_data->mif.timer, i2c_pnx_timeout, 0);
+
+	snprintf(alg_data->adapter.name, sizeof(alg_data->adapter.name),
+		 "%s", pdev->name);
+
+	/* Register I/O resource */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	alg_data->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(alg_data->ioaddr))
+		return PTR_ERR(alg_data->ioaddr);
+
+	ret = clk_prepare_enable(alg_data->clk);
+	if (ret)
+		return ret;
+
+	freq = clk_get_rate(alg_data->clk);
+
+	/*
+	 * Clock Divisor High This value is the number of system clocks
+	 * the serial clock (SCL) will be high.
+	 * For example, if the system clock period is 50 ns and the maximum
+	 * desired serial period is 10000 ns (100 kHz), then CLKHI would be
+	 * set to 0.5*(f_sys/f_i2c)-2=0.5*(20e6/100e3)-2=98. The actual value
+	 * programmed into CLKHI will vary from this slightly due to
+	 * variations in the output pad's rise and fall times as well as
+	 * the deglitching filter length.
+	 */
+
+	tmp = (freq / speed) / 2 - 2;
+	if (tmp > 0x3FF)
+		tmp = 0x3FF;
+	iowrite32(tmp, I2C_REG_CKH(alg_data));
+	iowrite32(tmp, I2C_REG_CKL(alg_data));
+
+	iowrite32(mcntrl_reset, I2C_REG_CTL(alg_data));
+	if (wait_reset(alg_data)) {
+		ret = -ENODEV;
+		goto out_clock;
+	}
+	init_completion(&alg_data->mif.complete);
+
+	alg_data->irq = platform_get_irq(pdev, 0);
+	if (alg_data->irq < 0) {
+		ret = alg_data->irq;
+		goto out_clock;
+	}
+	ret = devm_request_irq(&pdev->dev, alg_data->irq, i2c_pnx_interrupt,
+			       0, pdev->name, alg_data);
+	if (ret)
+		goto out_clock;
+
+	/* Register this adapter with the I2C subsystem */
+	ret = i2c_add_numbered_adapter(&alg_data->adapter);
+	if (ret < 0)
+		goto out_clock;
+
+	dev_dbg(&pdev->dev, "%s: Master at %pap, irq %d.\n",
+		alg_data->adapter.name, &res->start, alg_data->irq);
+
+	return 0;
+
+out_clock:
+	clk_disable_unprepare(alg_data->clk);
+	return ret;
+}
+
+static int i2c_pnx_remove(struct platform_device *pdev)
+{
+	struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&alg_data->adapter);
+	clk_disable_unprepare(alg_data->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id i2c_pnx_of_match[] = {
+	{ .compatible = "nxp,pnx-i2c" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, i2c_pnx_of_match);
+#endif
+
+static struct platform_driver i2c_pnx_driver = {
+	.driver = {
+		.name = "pnx-i2c",
+		.of_match_table = of_match_ptr(i2c_pnx_of_match),
+		.pm = PNX_I2C_PM,
+	},
+	.probe = i2c_pnx_probe,
+	.remove = i2c_pnx_remove,
+};
+
+static int __init i2c_adap_pnx_init(void)
+{
+	return platform_driver_register(&i2c_pnx_driver);
+}
+
+static void __exit i2c_adap_pnx_exit(void)
+{
+	platform_driver_unregister(&i2c_pnx_driver);
+}
+
+MODULE_AUTHOR("Vitaly Wool");
+MODULE_AUTHOR("Dennis Kovalev <source@mvista.com>");
+MODULE_DESCRIPTION("I2C driver for Philips IP3204-based I2C busses");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pnx-i2c");
+
+/* We need to make sure I2C is initialized before USB */
+subsys_initcall(i2c_adap_pnx_init);
+module_exit(i2c_adap_pnx_exit);