Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 656 insertions, 0 deletions

diff --git a/drivers/iio/frequency/admv1013.c b/drivers/iio/frequency/admv1013.c
new file mode 100644
index 000000000..ed8167271
--- /dev/null
+++ b/drivers/iio/frequency/admv1013.c
@@ -0,0 +1,656 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ADMV1013 driver
+ *
+ * Copyright 2021 Analog Devices Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/notifier.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+#include <linux/units.h>
+
+#include <asm/unaligned.h>
+
+/* ADMV1013 Register Map */
+#define ADMV1013_REG_SPI_CONTROL		0x00
+#define ADMV1013_REG_ALARM			0x01
+#define ADMV1013_REG_ALARM_MASKS		0x02
+#define ADMV1013_REG_ENABLE			0x03
+#define ADMV1013_REG_LO_AMP_I			0x05
+#define ADMV1013_REG_LO_AMP_Q			0x06
+#define ADMV1013_REG_OFFSET_ADJUST_I		0x07
+#define ADMV1013_REG_OFFSET_ADJUST_Q		0x08
+#define ADMV1013_REG_QUAD			0x09
+#define ADMV1013_REG_VVA_TEMP_COMP		0x0A
+
+/* ADMV1013_REG_SPI_CONTROL Map */
+#define ADMV1013_PARITY_EN_MSK			BIT(15)
+#define ADMV1013_SPI_SOFT_RESET_MSK		BIT(14)
+#define ADMV1013_CHIP_ID_MSK			GENMASK(11, 4)
+#define ADMV1013_CHIP_ID			0xA
+#define ADMV1013_REVISION_ID_MSK		GENMASK(3, 0)
+
+/* ADMV1013_REG_ALARM Map */
+#define ADMV1013_PARITY_ERROR_MSK		BIT(15)
+#define ADMV1013_TOO_FEW_ERRORS_MSK		BIT(14)
+#define ADMV1013_TOO_MANY_ERRORS_MSK		BIT(13)
+#define ADMV1013_ADDRESS_RANGE_ERROR_MSK	BIT(12)
+
+/* ADMV1013_REG_ENABLE Map */
+#define ADMV1013_VGA_PD_MSK			BIT(15)
+#define ADMV1013_MIXER_PD_MSK			BIT(14)
+#define ADMV1013_QUAD_PD_MSK			GENMASK(13, 11)
+#define ADMV1013_BG_PD_MSK			BIT(10)
+#define ADMV1013_MIXER_IF_EN_MSK		BIT(7)
+#define ADMV1013_DET_EN_MSK			BIT(5)
+
+/* ADMV1013_REG_LO_AMP Map */
+#define ADMV1013_LOAMP_PH_ADJ_FINE_MSK		GENMASK(13, 7)
+#define ADMV1013_MIXER_VGATE_MSK		GENMASK(6, 0)
+
+/* ADMV1013_REG_OFFSET_ADJUST Map */
+#define ADMV1013_MIXER_OFF_ADJ_P_MSK		GENMASK(15, 9)
+#define ADMV1013_MIXER_OFF_ADJ_N_MSK		GENMASK(8, 2)
+
+/* ADMV1013_REG_QUAD Map */
+#define ADMV1013_QUAD_SE_MODE_MSK		GENMASK(9, 6)
+#define ADMV1013_QUAD_FILTERS_MSK		GENMASK(3, 0)
+
+/* ADMV1013_REG_VVA_TEMP_COMP Map */
+#define ADMV1013_VVA_TEMP_COMP_MSK		GENMASK(15, 0)
+
+/* ADMV1013 Miscellaneous Defines */
+#define ADMV1013_READ				BIT(7)
+#define ADMV1013_REG_ADDR_READ_MSK		GENMASK(6, 1)
+#define ADMV1013_REG_ADDR_WRITE_MSK		GENMASK(22, 17)
+#define ADMV1013_REG_DATA_MSK			GENMASK(16, 1)
+
+enum {
+	ADMV1013_IQ_MODE,
+	ADMV1013_IF_MODE
+};
+
+enum {
+	ADMV1013_RFMOD_I_CALIBPHASE,
+	ADMV1013_RFMOD_Q_CALIBPHASE,
+};
+
+enum {
+	ADMV1013_SE_MODE_POS = 6,
+	ADMV1013_SE_MODE_NEG = 9,
+	ADMV1013_SE_MODE_DIFF = 12
+};
+
+struct admv1013_state {
+	struct spi_device	*spi;
+	struct clk		*clkin;
+	/* Protect against concurrent accesses to the device and to data */
+	struct mutex		lock;
+	struct regulator	*reg;
+	struct notifier_block	nb;
+	unsigned int		input_mode;
+	unsigned int		quad_se_mode;
+	bool			det_en;
+	u8			data[3] __aligned(IIO_DMA_MINALIGN);
+};
+
+static int __admv1013_spi_read(struct admv1013_state *st, unsigned int reg,
+			       unsigned int *val)
+{
+	int ret;
+	struct spi_transfer t = {0};
+
+	st->data[0] = ADMV1013_READ | FIELD_PREP(ADMV1013_REG_ADDR_READ_MSK, reg);
+	st->data[1] = 0x0;
+	st->data[2] = 0x0;
+
+	t.rx_buf = &st->data[0];
+	t.tx_buf = &st->data[0];
+	t.len = 3;
+
+	ret = spi_sync_transfer(st->spi, &t, 1);
+	if (ret)
+		return ret;
+
+	*val = FIELD_GET(ADMV1013_REG_DATA_MSK, get_unaligned_be24(&st->data[0]));
+
+	return ret;
+}
+
+static int admv1013_spi_read(struct admv1013_state *st, unsigned int reg,
+			     unsigned int *val)
+{
+	int ret;
+
+	mutex_lock(&st->lock);
+	ret = __admv1013_spi_read(st, reg, val);
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static int __admv1013_spi_write(struct admv1013_state *st,
+				unsigned int reg,
+				unsigned int val)
+{
+	put_unaligned_be24(FIELD_PREP(ADMV1013_REG_DATA_MSK, val) |
+			   FIELD_PREP(ADMV1013_REG_ADDR_WRITE_MSK, reg), &st->data[0]);
+
+	return spi_write(st->spi, &st->data[0], 3);
+}
+
+static int admv1013_spi_write(struct admv1013_state *st, unsigned int reg,
+			      unsigned int val)
+{
+	int ret;
+
+	mutex_lock(&st->lock);
+	ret = __admv1013_spi_write(st, reg, val);
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static int __admv1013_spi_update_bits(struct admv1013_state *st, unsigned int reg,
+				      unsigned int mask, unsigned int val)
+{
+	int ret;
+	unsigned int data, temp;
+
+	ret = __admv1013_spi_read(st, reg, &data);
+	if (ret)
+		return ret;
+
+	temp = (data & ~mask) | (val & mask);
+
+	return __admv1013_spi_write(st, reg, temp);
+}
+
+static int admv1013_spi_update_bits(struct admv1013_state *st, unsigned int reg,
+				    unsigned int mask, unsigned int val)
+{
+	int ret;
+
+	mutex_lock(&st->lock);
+	ret = __admv1013_spi_update_bits(st, reg, mask, val);
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static int admv1013_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long info)
+{
+	struct admv1013_state *st = iio_priv(indio_dev);
+	unsigned int data, addr;
+	int ret;
+
+	switch (info) {
+	case IIO_CHAN_INFO_CALIBBIAS:
+		switch (chan->channel) {
+		case IIO_MOD_I:
+			addr = ADMV1013_REG_OFFSET_ADJUST_I;
+			break;
+		case IIO_MOD_Q:
+			addr = ADMV1013_REG_OFFSET_ADJUST_Q;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		ret = admv1013_spi_read(st, addr, &data);
+		if (ret)
+			return ret;
+
+		if (!chan->channel)
+			*val = FIELD_GET(ADMV1013_MIXER_OFF_ADJ_P_MSK, data);
+		else
+			*val = FIELD_GET(ADMV1013_MIXER_OFF_ADJ_N_MSK, data);
+
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int admv1013_write_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int val, int val2, long info)
+{
+	struct admv1013_state *st = iio_priv(indio_dev);
+	unsigned int addr, data, msk;
+
+	switch (info) {
+	case IIO_CHAN_INFO_CALIBBIAS:
+		switch (chan->channel2) {
+		case IIO_MOD_I:
+			addr = ADMV1013_REG_OFFSET_ADJUST_I;
+			break;
+		case IIO_MOD_Q:
+			addr = ADMV1013_REG_OFFSET_ADJUST_Q;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		if (!chan->channel) {
+			msk = ADMV1013_MIXER_OFF_ADJ_P_MSK;
+			data = FIELD_PREP(ADMV1013_MIXER_OFF_ADJ_P_MSK, val);
+		} else {
+			msk = ADMV1013_MIXER_OFF_ADJ_N_MSK;
+			data = FIELD_PREP(ADMV1013_MIXER_OFF_ADJ_N_MSK, val);
+		}
+
+		return admv1013_spi_update_bits(st, addr, msk, data);
+	default:
+		return -EINVAL;
+	}
+}
+
+static ssize_t admv1013_read(struct iio_dev *indio_dev,
+			     uintptr_t private,
+			     const struct iio_chan_spec *chan,
+			     char *buf)
+{
+	struct admv1013_state *st = iio_priv(indio_dev);
+	unsigned int data, addr;
+	int ret;
+
+	switch ((u32)private) {
+	case ADMV1013_RFMOD_I_CALIBPHASE:
+		addr = ADMV1013_REG_LO_AMP_I;
+		break;
+	case ADMV1013_RFMOD_Q_CALIBPHASE:
+		addr = ADMV1013_REG_LO_AMP_Q;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = admv1013_spi_read(st, addr, &data);
+	if (ret)
+		return ret;
+
+	data = FIELD_GET(ADMV1013_LOAMP_PH_ADJ_FINE_MSK, data);
+
+	return sysfs_emit(buf, "%u\n", data);
+}
+
+static ssize_t admv1013_write(struct iio_dev *indio_dev,
+			      uintptr_t private,
+			      const struct iio_chan_spec *chan,
+			      const char *buf, size_t len)
+{
+	struct admv1013_state *st = iio_priv(indio_dev);
+	unsigned int data;
+	int ret;
+
+	ret = kstrtou32(buf, 10, &data);
+	if (ret)
+		return ret;
+
+	data = FIELD_PREP(ADMV1013_LOAMP_PH_ADJ_FINE_MSK, data);
+
+	switch ((u32)private) {
+	case ADMV1013_RFMOD_I_CALIBPHASE:
+		ret = admv1013_spi_update_bits(st, ADMV1013_REG_LO_AMP_I,
+					       ADMV1013_LOAMP_PH_ADJ_FINE_MSK,
+					       data);
+		if (ret)
+			return ret;
+		break;
+	case ADMV1013_RFMOD_Q_CALIBPHASE:
+		ret = admv1013_spi_update_bits(st, ADMV1013_REG_LO_AMP_Q,
+					       ADMV1013_LOAMP_PH_ADJ_FINE_MSK,
+					       data);
+		if (ret)
+			return ret;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret ? ret : len;
+}
+
+static int admv1013_update_quad_filters(struct admv1013_state *st)
+{
+	unsigned int filt_raw;
+	u64 rate = clk_get_rate(st->clkin);
+
+	if (rate >= (5400 * HZ_PER_MHZ) && rate <= (7000 * HZ_PER_MHZ))
+		filt_raw = 15;
+	else if (rate >= (5400 * HZ_PER_MHZ) && rate <= (8000 * HZ_PER_MHZ))
+		filt_raw = 10;
+	else if (rate >= (6600 * HZ_PER_MHZ) && rate <= (9200 * HZ_PER_MHZ))
+		filt_raw = 5;
+	else
+		filt_raw = 0;
+
+	return __admv1013_spi_update_bits(st, ADMV1013_REG_QUAD,
+					ADMV1013_QUAD_FILTERS_MSK,
+					FIELD_PREP(ADMV1013_QUAD_FILTERS_MSK, filt_raw));
+}
+
+static int admv1013_update_mixer_vgate(struct admv1013_state *st)
+{
+	unsigned int vcm, mixer_vgate;
+
+	vcm = regulator_get_voltage(st->reg);
+
+	if (vcm < 1800000)
+		mixer_vgate = (2389 * vcm / 1000000 + 8100) / 100;
+	else if (vcm > 1800000 && vcm < 2600000)
+		mixer_vgate = (2375 * vcm / 1000000 + 125) / 100;
+	else
+		return -EINVAL;
+
+	return __admv1013_spi_update_bits(st, ADMV1013_REG_LO_AMP_I,
+				 ADMV1013_MIXER_VGATE_MSK,
+				 FIELD_PREP(ADMV1013_MIXER_VGATE_MSK, mixer_vgate));
+}
+
+static int admv1013_reg_access(struct iio_dev *indio_dev,
+			       unsigned int reg,
+			       unsigned int write_val,
+			       unsigned int *read_val)
+{
+	struct admv1013_state *st = iio_priv(indio_dev);
+
+	if (read_val)
+		return admv1013_spi_read(st, reg, read_val);
+	else
+		return admv1013_spi_write(st, reg, write_val);
+}
+
+static const struct iio_info admv1013_info = {
+	.read_raw = admv1013_read_raw,
+	.write_raw = admv1013_write_raw,
+	.debugfs_reg_access = &admv1013_reg_access,
+};
+
+static int admv1013_freq_change(struct notifier_block *nb, unsigned long action, void *data)
+{
+	struct admv1013_state *st = container_of(nb, struct admv1013_state, nb);
+	int ret;
+
+	if (action == POST_RATE_CHANGE) {
+		mutex_lock(&st->lock);
+		ret = notifier_from_errno(admv1013_update_quad_filters(st));
+		mutex_unlock(&st->lock);
+		return ret;
+	}
+
+	return NOTIFY_OK;
+}
+
+#define _ADMV1013_EXT_INFO(_name, _shared, _ident) { \
+		.name = _name, \
+		.read = admv1013_read, \
+		.write = admv1013_write, \
+		.private = _ident, \
+		.shared = _shared, \
+}
+
+static const struct iio_chan_spec_ext_info admv1013_ext_info[] = {
+	_ADMV1013_EXT_INFO("i_calibphase", IIO_SEPARATE, ADMV1013_RFMOD_I_CALIBPHASE),
+	_ADMV1013_EXT_INFO("q_calibphase", IIO_SEPARATE, ADMV1013_RFMOD_Q_CALIBPHASE),
+	{ },
+};
+
+#define ADMV1013_CHAN_PHASE(_channel, _channel2, _admv1013_ext_info) {		\
+	.type = IIO_ALTVOLTAGE,					\
+	.output = 0,						\
+	.indexed = 1,						\
+	.channel2 = _channel2,					\
+	.channel = _channel,					\
+	.differential = 1,					\
+	.ext_info = _admv1013_ext_info,				\
+	}
+
+#define ADMV1013_CHAN_CALIB(_channel, rf_comp) {	\
+	.type = IIO_ALTVOLTAGE,					\
+	.output = 0,						\
+	.indexed = 1,						\
+	.channel = _channel,					\
+	.channel2 = IIO_MOD_##rf_comp,				\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_CALIBBIAS),	\
+	}
+
+static const struct iio_chan_spec admv1013_channels[] = {
+	ADMV1013_CHAN_PHASE(0, 1, admv1013_ext_info),
+	ADMV1013_CHAN_CALIB(0, I),
+	ADMV1013_CHAN_CALIB(0, Q),
+	ADMV1013_CHAN_CALIB(1, I),
+	ADMV1013_CHAN_CALIB(1, Q),
+};
+
+static int admv1013_init(struct admv1013_state *st)
+{
+	int ret;
+	unsigned int data;
+	struct spi_device *spi = st->spi;
+
+	/* Perform a software reset */
+	ret = __admv1013_spi_update_bits(st, ADMV1013_REG_SPI_CONTROL,
+					 ADMV1013_SPI_SOFT_RESET_MSK,
+					 FIELD_PREP(ADMV1013_SPI_SOFT_RESET_MSK, 1));
+	if (ret)
+		return ret;
+
+	ret = __admv1013_spi_update_bits(st, ADMV1013_REG_SPI_CONTROL,
+					 ADMV1013_SPI_SOFT_RESET_MSK,
+					 FIELD_PREP(ADMV1013_SPI_SOFT_RESET_MSK, 0));
+	if (ret)
+		return ret;
+
+	ret = __admv1013_spi_read(st, ADMV1013_REG_SPI_CONTROL, &data);
+	if (ret)
+		return ret;
+
+	data = FIELD_GET(ADMV1013_CHIP_ID_MSK, data);
+	if (data != ADMV1013_CHIP_ID) {
+		dev_err(&spi->dev, "Invalid Chip ID.\n");
+		return -EINVAL;
+	}
+
+	ret = __admv1013_spi_write(st, ADMV1013_REG_VVA_TEMP_COMP, 0xE700);
+	if (ret)
+		return ret;
+
+	data = FIELD_PREP(ADMV1013_QUAD_SE_MODE_MSK, st->quad_se_mode);
+
+	ret = __admv1013_spi_update_bits(st, ADMV1013_REG_QUAD,
+					 ADMV1013_QUAD_SE_MODE_MSK, data);
+	if (ret)
+		return ret;
+
+	ret = admv1013_update_mixer_vgate(st);
+	if (ret)
+		return ret;
+
+	ret = admv1013_update_quad_filters(st);
+	if (ret)
+		return ret;
+
+	return __admv1013_spi_update_bits(st, ADMV1013_REG_ENABLE,
+					  ADMV1013_DET_EN_MSK |
+					  ADMV1013_MIXER_IF_EN_MSK,
+					  st->det_en |
+					  st->input_mode);
+}
+
+static void admv1013_clk_disable(void *data)
+{
+	clk_disable_unprepare(data);
+}
+
+static void admv1013_reg_disable(void *data)
+{
+	regulator_disable(data);
+}
+
+static void admv1013_powerdown(void *data)
+{
+	unsigned int enable_reg, enable_reg_msk;
+
+	/* Disable all components in the Enable Register */
+	enable_reg_msk = ADMV1013_VGA_PD_MSK |
+			ADMV1013_MIXER_PD_MSK |
+			ADMV1013_QUAD_PD_MSK |
+			ADMV1013_BG_PD_MSK |
+			ADMV1013_MIXER_IF_EN_MSK |
+			ADMV1013_DET_EN_MSK;
+
+	enable_reg = FIELD_PREP(ADMV1013_VGA_PD_MSK, 1) |
+			FIELD_PREP(ADMV1013_MIXER_PD_MSK, 1) |
+			FIELD_PREP(ADMV1013_QUAD_PD_MSK, 7) |
+			FIELD_PREP(ADMV1013_BG_PD_MSK, 1) |
+			FIELD_PREP(ADMV1013_MIXER_IF_EN_MSK, 0) |
+			FIELD_PREP(ADMV1013_DET_EN_MSK, 0);
+
+	admv1013_spi_update_bits(data, ADMV1013_REG_ENABLE, enable_reg_msk, enable_reg);
+}
+
+static int admv1013_properties_parse(struct admv1013_state *st)
+{
+	int ret;
+	const char *str;
+	struct spi_device *spi = st->spi;
+
+	st->det_en = device_property_read_bool(&spi->dev, "adi,detector-enable");
+
+	ret = device_property_read_string(&spi->dev, "adi,input-mode", &str);
+	if (ret)
+		st->input_mode = ADMV1013_IQ_MODE;
+
+	if (!strcmp(str, "iq"))
+		st->input_mode = ADMV1013_IQ_MODE;
+	else if (!strcmp(str, "if"))
+		st->input_mode = ADMV1013_IF_MODE;
+	else
+		return -EINVAL;
+
+	ret = device_property_read_string(&spi->dev, "adi,quad-se-mode", &str);
+	if (ret)
+		st->quad_se_mode = ADMV1013_SE_MODE_DIFF;
+
+	if (!strcmp(str, "diff"))
+		st->quad_se_mode = ADMV1013_SE_MODE_DIFF;
+	else if (!strcmp(str, "se-pos"))
+		st->quad_se_mode = ADMV1013_SE_MODE_POS;
+	else if (!strcmp(str, "se-neg"))
+		st->quad_se_mode = ADMV1013_SE_MODE_NEG;
+	else
+		return -EINVAL;
+
+	st->reg = devm_regulator_get(&spi->dev, "vcm");
+	if (IS_ERR(st->reg))
+		return dev_err_probe(&spi->dev, PTR_ERR(st->reg),
+				     "failed to get the common-mode voltage\n");
+
+	st->clkin = devm_clk_get(&spi->dev, "lo_in");
+	if (IS_ERR(st->clkin))
+		return dev_err_probe(&spi->dev, PTR_ERR(st->clkin),
+				     "failed to get the LO input clock\n");
+
+	return 0;
+}
+
+static int admv1013_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct admv1013_state *st;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	indio_dev->info = &admv1013_info;
+	indio_dev->name = "admv1013";
+	indio_dev->channels = admv1013_channels;
+	indio_dev->num_channels = ARRAY_SIZE(admv1013_channels);
+
+	st->spi = spi;
+
+	ret = admv1013_properties_parse(st);
+	if (ret)
+		return ret;
+
+	ret = regulator_enable(st->reg);
+	if (ret) {
+		dev_err(&spi->dev, "Failed to enable specified Common-Mode Voltage!\n");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&spi->dev, admv1013_reg_disable,
+				       st->reg);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(st->clkin);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(&spi->dev, admv1013_clk_disable, st->clkin);
+	if (ret)
+		return ret;
+
+	st->nb.notifier_call = admv1013_freq_change;
+	ret = devm_clk_notifier_register(&spi->dev, st->clkin, &st->nb);
+	if (ret)
+		return ret;
+
+	mutex_init(&st->lock);
+
+	ret = admv1013_init(st);
+	if (ret) {
+		dev_err(&spi->dev, "admv1013 init failed\n");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&spi->dev, admv1013_powerdown, st);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct spi_device_id admv1013_id[] = {
+	{ "admv1013", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, admv1013_id);
+
+static const struct of_device_id admv1013_of_match[] = {
+	{ .compatible = "adi,admv1013" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, admv1013_of_match);
+
+static struct spi_driver admv1013_driver = {
+	.driver = {
+		.name = "admv1013",
+		.of_match_table = admv1013_of_match,
+	},
+	.probe = admv1013_probe,
+	.id_table = admv1013_id,
+};
+module_spi_driver(admv1013_driver);
+
+MODULE_AUTHOR("Antoniu Miclaus <antoniu.miclaus@analog.com");
+MODULE_DESCRIPTION("Analog Devices ADMV1013");
+MODULE_LICENSE("GPL v2");