Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 510 insertions, 0 deletions

diff --git a/drivers/iio/health/max30100.c b/drivers/iio/health/max30100.c
new file mode 100644
index 000000000..a80fa9852
--- /dev/null
+++ b/drivers/iio/health/max30100.c
@@ -0,0 +1,510 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * max30100.c - Support for MAX30100 heart rate and pulse oximeter sensor
+ *
+ * Copyright (C) 2015, 2018
+ * Author: Matt Ranostay <matt.ranostay@konsulko.com>
+ *
+ * TODO: enable pulse length controls via device tree properties
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+
+#define MAX30100_REGMAP_NAME	"max30100_regmap"
+#define MAX30100_DRV_NAME	"max30100"
+
+#define MAX30100_REG_INT_STATUS			0x00
+#define MAX30100_REG_INT_STATUS_PWR_RDY		BIT(0)
+#define MAX30100_REG_INT_STATUS_SPO2_RDY	BIT(4)
+#define MAX30100_REG_INT_STATUS_HR_RDY		BIT(5)
+#define MAX30100_REG_INT_STATUS_FIFO_RDY	BIT(7)
+
+#define MAX30100_REG_INT_ENABLE			0x01
+#define MAX30100_REG_INT_ENABLE_SPO2_EN		BIT(0)
+#define MAX30100_REG_INT_ENABLE_HR_EN		BIT(1)
+#define MAX30100_REG_INT_ENABLE_FIFO_EN		BIT(3)
+#define MAX30100_REG_INT_ENABLE_MASK		0xf0
+#define MAX30100_REG_INT_ENABLE_MASK_SHIFT	4
+
+#define MAX30100_REG_FIFO_WR_PTR		0x02
+#define MAX30100_REG_FIFO_OVR_CTR		0x03
+#define MAX30100_REG_FIFO_RD_PTR		0x04
+#define MAX30100_REG_FIFO_DATA			0x05
+#define MAX30100_REG_FIFO_DATA_ENTRY_COUNT	16
+#define MAX30100_REG_FIFO_DATA_ENTRY_LEN	4
+
+#define MAX30100_REG_MODE_CONFIG		0x06
+#define MAX30100_REG_MODE_CONFIG_MODE_SPO2_EN	BIT(0)
+#define MAX30100_REG_MODE_CONFIG_MODE_HR_EN	BIT(1)
+#define MAX30100_REG_MODE_CONFIG_MODE_MASK	0x03
+#define MAX30100_REG_MODE_CONFIG_TEMP_EN	BIT(3)
+#define MAX30100_REG_MODE_CONFIG_PWR		BIT(7)
+
+#define MAX30100_REG_SPO2_CONFIG		0x07
+#define MAX30100_REG_SPO2_CONFIG_100HZ		BIT(2)
+#define MAX30100_REG_SPO2_CONFIG_HI_RES_EN	BIT(6)
+#define MAX30100_REG_SPO2_CONFIG_1600US		0x3
+
+#define MAX30100_REG_LED_CONFIG			0x09
+#define MAX30100_REG_LED_CONFIG_LED_MASK	0x0f
+#define MAX30100_REG_LED_CONFIG_RED_LED_SHIFT	4
+
+#define MAX30100_REG_LED_CONFIG_24MA		0x07
+#define MAX30100_REG_LED_CONFIG_50MA		0x0f
+
+#define MAX30100_REG_TEMP_INTEGER		0x16
+#define MAX30100_REG_TEMP_FRACTION		0x17
+
+struct max30100_data {
+	struct i2c_client *client;
+	struct iio_dev *indio_dev;
+	struct mutex lock;
+	struct regmap *regmap;
+
+	__be16 buffer[2]; /* 2 16-bit channels */
+};
+
+static bool max30100_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case MAX30100_REG_INT_STATUS:
+	case MAX30100_REG_MODE_CONFIG:
+	case MAX30100_REG_FIFO_WR_PTR:
+	case MAX30100_REG_FIFO_OVR_CTR:
+	case MAX30100_REG_FIFO_RD_PTR:
+	case MAX30100_REG_FIFO_DATA:
+	case MAX30100_REG_TEMP_INTEGER:
+	case MAX30100_REG_TEMP_FRACTION:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config max30100_regmap_config = {
+	.name = MAX30100_REGMAP_NAME,
+
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = MAX30100_REG_TEMP_FRACTION,
+	.cache_type = REGCACHE_FLAT,
+
+	.volatile_reg = max30100_is_volatile_reg,
+};
+
+static const unsigned int max30100_led_current_mapping[] = {
+	4400, 7600, 11000, 14200, 17400,
+	20800, 24000, 27100, 30600, 33800,
+	37000, 40200, 43600, 46800, 50000
+};
+
+static const unsigned long max30100_scan_masks[] = {0x3, 0};
+
+static const struct iio_chan_spec max30100_channels[] = {
+	{
+		.type = IIO_INTENSITY,
+		.channel2 = IIO_MOD_LIGHT_IR,
+		.modified = 1,
+
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_BE,
+		},
+	},
+	{
+		.type = IIO_INTENSITY,
+		.channel2 = IIO_MOD_LIGHT_RED,
+		.modified = 1,
+
+		.scan_index = 1,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_BE,
+		},
+	},
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = -1,
+	},
+};
+
+static int max30100_set_powermode(struct max30100_data *data, bool state)
+{
+	return regmap_update_bits(data->regmap, MAX30100_REG_MODE_CONFIG,
+				  MAX30100_REG_MODE_CONFIG_PWR,
+				  state ? 0 : MAX30100_REG_MODE_CONFIG_PWR);
+}
+
+static int max30100_clear_fifo(struct max30100_data *data)
+{
+	int ret;
+
+	ret = regmap_write(data->regmap, MAX30100_REG_FIFO_WR_PTR, 0);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(data->regmap, MAX30100_REG_FIFO_OVR_CTR, 0);
+	if (ret)
+		return ret;
+
+	return regmap_write(data->regmap, MAX30100_REG_FIFO_RD_PTR, 0);
+}
+
+static int max30100_buffer_postenable(struct iio_dev *indio_dev)
+{
+	struct max30100_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = max30100_set_powermode(data, true);
+	if (ret)
+		return ret;
+
+	return max30100_clear_fifo(data);
+}
+
+static int max30100_buffer_predisable(struct iio_dev *indio_dev)
+{
+	struct max30100_data *data = iio_priv(indio_dev);
+
+	return max30100_set_powermode(data, false);
+}
+
+static const struct iio_buffer_setup_ops max30100_buffer_setup_ops = {
+	.postenable = max30100_buffer_postenable,
+	.predisable = max30100_buffer_predisable,
+};
+
+static inline int max30100_fifo_count(struct max30100_data *data)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(data->regmap, MAX30100_REG_INT_STATUS, &val);
+	if (ret)
+		return ret;
+
+	/* FIFO is almost full */
+	if (val & MAX30100_REG_INT_STATUS_FIFO_RDY)
+		return MAX30100_REG_FIFO_DATA_ENTRY_COUNT - 1;
+
+	return 0;
+}
+
+static int max30100_read_measurement(struct max30100_data *data)
+{
+	int ret;
+
+	ret = i2c_smbus_read_i2c_block_data(data->client,
+					    MAX30100_REG_FIFO_DATA,
+					    MAX30100_REG_FIFO_DATA_ENTRY_LEN,
+					    (u8 *) &data->buffer);
+
+	return (ret == MAX30100_REG_FIFO_DATA_ENTRY_LEN) ? 0 : ret;
+}
+
+static irqreturn_t max30100_interrupt_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct max30100_data *data = iio_priv(indio_dev);
+	int ret, cnt = 0;
+
+	mutex_lock(&data->lock);
+
+	while (cnt || (cnt = max30100_fifo_count(data)) > 0) {
+		ret = max30100_read_measurement(data);
+		if (ret)
+			break;
+
+		iio_push_to_buffers(data->indio_dev, data->buffer);
+		cnt--;
+	}
+
+	mutex_unlock(&data->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int max30100_get_current_idx(unsigned int val, int *reg)
+{
+	int idx;
+
+	/* LED turned off */
+	if (val == 0) {
+		*reg = 0;
+		return 0;
+	}
+
+	for (idx = 0; idx < ARRAY_SIZE(max30100_led_current_mapping); idx++) {
+		if (max30100_led_current_mapping[idx] == val) {
+			*reg = idx + 1;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int max30100_led_init(struct max30100_data *data)
+{
+	struct device *dev = &data->client->dev;
+	unsigned int val[2];
+	int reg, ret;
+
+	ret = device_property_read_u32_array(dev, "maxim,led-current-microamp",
+					(unsigned int *) &val, 2);
+	if (ret) {
+		/* Default to 24 mA RED LED, 50 mA IR LED */
+		reg = (MAX30100_REG_LED_CONFIG_24MA <<
+			MAX30100_REG_LED_CONFIG_RED_LED_SHIFT) |
+			MAX30100_REG_LED_CONFIG_50MA;
+		dev_warn(dev, "no led-current-microamp set");
+
+		return regmap_write(data->regmap, MAX30100_REG_LED_CONFIG, reg);
+	}
+
+	/* RED LED current */
+	ret = max30100_get_current_idx(val[0], &reg);
+	if (ret) {
+		dev_err(dev, "invalid RED current setting %d", val[0]);
+		return ret;
+	}
+
+	ret = regmap_update_bits(data->regmap, MAX30100_REG_LED_CONFIG,
+		MAX30100_REG_LED_CONFIG_LED_MASK <<
+		MAX30100_REG_LED_CONFIG_RED_LED_SHIFT,
+		reg << MAX30100_REG_LED_CONFIG_RED_LED_SHIFT);
+	if (ret)
+		return ret;
+
+	/* IR LED current */
+	ret = max30100_get_current_idx(val[1], &reg);
+	if (ret) {
+		dev_err(dev, "invalid IR current setting %d", val[1]);
+		return ret;
+	}
+
+	return regmap_update_bits(data->regmap, MAX30100_REG_LED_CONFIG,
+		MAX30100_REG_LED_CONFIG_LED_MASK, reg);
+}
+
+static int max30100_chip_init(struct max30100_data *data)
+{
+	int ret;
+
+	/* setup LED current settings */
+	ret = max30100_led_init(data);
+	if (ret)
+		return ret;
+
+	/* enable hi-res SPO2 readings at 100Hz */
+	ret = regmap_write(data->regmap, MAX30100_REG_SPO2_CONFIG,
+				 MAX30100_REG_SPO2_CONFIG_HI_RES_EN |
+				 MAX30100_REG_SPO2_CONFIG_100HZ);
+	if (ret)
+		return ret;
+
+	/* enable SPO2 mode */
+	ret = regmap_update_bits(data->regmap, MAX30100_REG_MODE_CONFIG,
+				 MAX30100_REG_MODE_CONFIG_MODE_MASK,
+				 MAX30100_REG_MODE_CONFIG_MODE_HR_EN |
+				 MAX30100_REG_MODE_CONFIG_MODE_SPO2_EN);
+	if (ret)
+		return ret;
+
+	/* enable FIFO interrupt */
+	return regmap_update_bits(data->regmap, MAX30100_REG_INT_ENABLE,
+				 MAX30100_REG_INT_ENABLE_MASK,
+				 MAX30100_REG_INT_ENABLE_FIFO_EN
+				 << MAX30100_REG_INT_ENABLE_MASK_SHIFT);
+}
+
+static int max30100_read_temp(struct max30100_data *data, int *val)
+{
+	int ret;
+	unsigned int reg;
+
+	ret = regmap_read(data->regmap, MAX30100_REG_TEMP_INTEGER, &reg);
+	if (ret < 0)
+		return ret;
+	*val = reg << 4;
+
+	ret = regmap_read(data->regmap, MAX30100_REG_TEMP_FRACTION, &reg);
+	if (ret < 0)
+		return ret;
+
+	*val |= reg & 0xf;
+	*val = sign_extend32(*val, 11);
+
+	return 0;
+}
+
+static int max30100_get_temp(struct max30100_data *data, int *val)
+{
+	int ret;
+
+	/* start acquisition */
+	ret = regmap_update_bits(data->regmap, MAX30100_REG_MODE_CONFIG,
+				 MAX30100_REG_MODE_CONFIG_TEMP_EN,
+				 MAX30100_REG_MODE_CONFIG_TEMP_EN);
+	if (ret)
+		return ret;
+
+	msleep(35);
+
+	return max30100_read_temp(data, val);
+}
+
+static int max30100_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
+{
+	struct max30100_data *data = iio_priv(indio_dev);
+	int ret = -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		/*
+		 * Temperature reading can only be acquired while engine
+		 * is running
+		 */
+		if (iio_device_claim_buffer_mode(indio_dev)) {
+			/*
+			 * Replacing -EBUSY or other error code
+			 * returned by iio_device_claim_buffer_mode()
+			 * because user space may rely on the current
+			 * one.
+			 */
+			ret = -EAGAIN;
+		} else {
+			ret = max30100_get_temp(data, val);
+			if (!ret)
+				ret = IIO_VAL_INT;
+
+			iio_device_release_buffer_mode(indio_dev);
+		}
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 1;  /* 0.0625 */
+		*val2 = 16;
+		ret = IIO_VAL_FRACTIONAL;
+		break;
+	}
+
+	return ret;
+}
+
+static const struct iio_info max30100_info = {
+	.read_raw = max30100_read_raw,
+};
+
+static int max30100_probe(struct i2c_client *client)
+{
+	struct max30100_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	indio_dev->name = MAX30100_DRV_NAME;
+	indio_dev->channels = max30100_channels;
+	indio_dev->info = &max30100_info;
+	indio_dev->num_channels = ARRAY_SIZE(max30100_channels);
+	indio_dev->available_scan_masks = max30100_scan_masks;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = devm_iio_kfifo_buffer_setup(&client->dev, indio_dev,
+					  &max30100_buffer_setup_ops);
+	if (ret)
+		return ret;
+
+	data = iio_priv(indio_dev);
+	data->indio_dev = indio_dev;
+	data->client = client;
+
+	mutex_init(&data->lock);
+	i2c_set_clientdata(client, indio_dev);
+
+	data->regmap = devm_regmap_init_i2c(client, &max30100_regmap_config);
+	if (IS_ERR(data->regmap)) {
+		dev_err(&client->dev, "regmap initialization failed.\n");
+		return PTR_ERR(data->regmap);
+	}
+	max30100_set_powermode(data, false);
+
+	ret = max30100_chip_init(data);
+	if (ret)
+		return ret;
+
+	if (client->irq <= 0) {
+		dev_err(&client->dev, "no valid irq defined\n");
+		return -EINVAL;
+	}
+	ret = devm_request_threaded_irq(&client->dev, client->irq,
+					NULL, max30100_interrupt_handler,
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					"max30100_irq", indio_dev);
+	if (ret) {
+		dev_err(&client->dev, "request irq (%d) failed\n", client->irq);
+		return ret;
+	}
+
+	return iio_device_register(indio_dev);
+}
+
+static void max30100_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct max30100_data *data = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	max30100_set_powermode(data, false);
+}
+
+static const struct i2c_device_id max30100_id[] = {
+	{ "max30100", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, max30100_id);
+
+static const struct of_device_id max30100_dt_ids[] = {
+	{ .compatible = "maxim,max30100" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max30100_dt_ids);
+
+static struct i2c_driver max30100_driver = {
+	.driver = {
+		.name	= MAX30100_DRV_NAME,
+		.of_match_table	= max30100_dt_ids,
+	},
+	.probe_new	= max30100_probe,
+	.remove		= max30100_remove,
+	.id_table	= max30100_id,
+};
+module_i2c_driver(max30100_driver);
+
+MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>");
+MODULE_DESCRIPTION("MAX30100 heart rate and pulse oximeter sensor");
+MODULE_LICENSE("GPL");