Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 917 insertions, 0 deletions

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
new file mode 100644
index 000000000..f2b64b495
--- /dev/null
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
@@ -0,0 +1,917 @@
+/*
+ * STMicroelectronics st_lsm6dsx i2c controller driver
+ *
+ * i2c controller embedded in lsm6dx series can connect up to four
+ * slave devices using accelerometer sensor as trigger for i2c
+ * read/write operations. Current implementation relies on SLV0 channel
+ * for slave configuration and SLV{1,2,3} to read data and push them into
+ * the hw FIFO
+ *
+ * Copyright (C) 2018 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/bitfield.h>
+
+#include "st_lsm6dsx.h"
+
+#define ST_LSM6DSX_SLV_ADDR(n, base)		((base) + (n) * 3)
+#define ST_LSM6DSX_SLV_SUB_ADDR(n, base)	((base) + 1 + (n) * 3)
+#define ST_LSM6DSX_SLV_CONFIG(n, base)		((base) + 2 + (n) * 3)
+
+#define ST_LS6DSX_READ_OP_MASK			GENMASK(2, 0)
+
+static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = {
+	/* LIS2MDL */
+	{
+		.i2c_addr = { 0x1e },
+		.wai = {
+			.addr = 0x4f,
+			.val = 0x40,
+		},
+		.id = ST_LSM6DSX_ID_MAGN,
+		.odr_table = {
+			.reg = {
+				.addr = 0x60,
+				.mask = GENMASK(3, 2),
+			},
+			.odr_avl[0] = {  10000, 0x0 },
+			.odr_avl[1] = {  20000, 0x1 },
+			.odr_avl[2] = {  50000, 0x2 },
+			.odr_avl[3] = { 100000, 0x3 },
+			.odr_len = 4,
+		},
+		.fs_table = {
+			.fs_avl[0] = {
+				.gain = 1500,
+				.val = 0x0,
+			}, /* 1500 uG/LSB */
+			.fs_len = 1,
+		},
+		.temp_comp = {
+			.addr = 0x60,
+			.mask = BIT(7),
+		},
+		.pwr_table = {
+			.reg = {
+				.addr = 0x60,
+				.mask = GENMASK(1, 0),
+			},
+			.off_val = 0x2,
+			.on_val = 0x0,
+		},
+		.off_canc = {
+			.addr = 0x61,
+			.mask = BIT(1),
+		},
+		.bdu = {
+			.addr = 0x62,
+			.mask = BIT(4),
+		},
+		.out = {
+			.addr = 0x68,
+			.len = 6,
+		},
+	},
+	/* LIS3MDL */
+	{
+		.i2c_addr = { 0x1e },
+		.wai = {
+			.addr = 0x0f,
+			.val = 0x3d,
+		},
+		.id = ST_LSM6DSX_ID_MAGN,
+		.odr_table = {
+			.reg = {
+				.addr = 0x20,
+				.mask = GENMASK(4, 2),
+			},
+			.odr_avl[0] = {  1000, 0x0 },
+			.odr_avl[1] = {  2000, 0x1 },
+			.odr_avl[2] = {  3000, 0x2 },
+			.odr_avl[3] = {  5000, 0x3 },
+			.odr_avl[4] = { 10000, 0x4 },
+			.odr_avl[5] = { 20000, 0x5 },
+			.odr_avl[6] = { 40000, 0x6 },
+			.odr_avl[7] = { 80000, 0x7 },
+			.odr_len = 8,
+		},
+		.fs_table = {
+			.reg = {
+				.addr = 0x21,
+				.mask = GENMASK(6, 5),
+			},
+			.fs_avl[0] = {
+				.gain = 146,
+				.val = 0x00,
+			}, /* 4000 uG/LSB */
+			.fs_avl[1] = {
+				.gain = 292,
+				.val = 0x01,
+			}, /* 8000 uG/LSB */
+			.fs_avl[2] = {
+				.gain = 438,
+				.val = 0x02,
+			}, /* 12000 uG/LSB */
+			.fs_avl[3] = {
+				.gain = 584,
+				.val = 0x03,
+			}, /* 16000 uG/LSB */
+			.fs_len = 4,
+		},
+		.pwr_table = {
+			.reg = {
+				.addr = 0x22,
+				.mask = GENMASK(1, 0),
+			},
+			.off_val = 0x2,
+			.on_val = 0x0,
+		},
+		.bdu = {
+			.addr = 0x24,
+			.mask = BIT(6),
+		},
+		.out = {
+			.addr = 0x28,
+			.len = 6,
+		},
+	},
+};
+
+static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw)
+{
+	struct st_lsm6dsx_sensor *sensor;
+	u32 odr, timeout;
+
+	sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
+	odr = (hw->enable_mask & BIT(ST_LSM6DSX_ID_ACC)) ? sensor->odr : 12500;
+	/* set 10ms as minimum timeout for i2c slave configuration */
+	timeout = max_t(u32, 2000000U / odr + 1, 10);
+	msleep(timeout);
+}
+
+/*
+ * st_lsm6dsx_shub_read_output - read i2c controller register
+ *
+ * Read st_lsm6dsx i2c controller register
+ */
+int st_lsm6dsx_shub_read_output(struct st_lsm6dsx_hw *hw, u8 *data, int len)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	int err;
+
+	mutex_lock(&hw->page_lock);
+
+	hub_settings = &hw->settings->shub_settings;
+	if (hub_settings->shub_out.sec_page) {
+		err = st_lsm6dsx_set_page(hw, true);
+		if (err < 0)
+			goto out;
+	}
+
+	err = regmap_bulk_read(hw->regmap, hub_settings->shub_out.addr,
+			       data, len);
+
+	if (hub_settings->shub_out.sec_page)
+		st_lsm6dsx_set_page(hw, false);
+out:
+	mutex_unlock(&hw->page_lock);
+
+	return err;
+}
+
+/*
+ * st_lsm6dsx_shub_write_reg - write i2c controller register
+ *
+ * Write st_lsm6dsx i2c controller register
+ */
+static int st_lsm6dsx_shub_write_reg(struct st_lsm6dsx_hw *hw, u8 addr,
+				     u8 *data, int len)
+{
+	int err;
+
+	mutex_lock(&hw->page_lock);
+	err = st_lsm6dsx_set_page(hw, true);
+	if (err < 0)
+		goto out;
+
+	err = regmap_bulk_write(hw->regmap, addr, data, len);
+
+	st_lsm6dsx_set_page(hw, false);
+out:
+	mutex_unlock(&hw->page_lock);
+
+	return err;
+}
+
+static int
+st_lsm6dsx_shub_write_reg_with_mask(struct st_lsm6dsx_hw *hw, u8 addr,
+				    u8 mask, u8 val)
+{
+	int err;
+
+	mutex_lock(&hw->page_lock);
+	err = st_lsm6dsx_set_page(hw, true);
+	if (err < 0)
+		goto out;
+
+	err = regmap_update_bits(hw->regmap, addr, mask, val);
+
+	st_lsm6dsx_set_page(hw, false);
+out:
+	mutex_unlock(&hw->page_lock);
+
+	return err;
+}
+
+static int st_lsm6dsx_shub_master_enable(struct st_lsm6dsx_sensor *sensor,
+					 bool enable)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	unsigned int data;
+	int err;
+
+	/* enable acc sensor as trigger */
+	err = st_lsm6dsx_sensor_set_enable(sensor, enable);
+	if (err < 0)
+		return err;
+
+	mutex_lock(&hw->page_lock);
+
+	hub_settings = &hw->settings->shub_settings;
+	if (hub_settings->master_en.sec_page) {
+		err = st_lsm6dsx_set_page(hw, true);
+		if (err < 0)
+			goto out;
+	}
+
+	data = ST_LSM6DSX_SHIFT_VAL(enable, hub_settings->master_en.mask);
+	err = regmap_update_bits(hw->regmap, hub_settings->master_en.addr,
+				 hub_settings->master_en.mask, data);
+
+	if (hub_settings->master_en.sec_page)
+		st_lsm6dsx_set_page(hw, false);
+out:
+	mutex_unlock(&hw->page_lock);
+
+	return err;
+}
+
+/*
+ * st_lsm6dsx_shub_read - read data from slave device register
+ *
+ * Read data from slave device register. SLV0 is used for
+ * one-shot read operation
+ */
+static int
+st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr,
+		     u8 *data, int len)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	u8 config[3], slv_addr, slv_config = 0;
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	const struct st_lsm6dsx_reg *aux_sens;
+	int err;
+
+	hub_settings = &hw->settings->shub_settings;
+	slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr);
+	aux_sens = &hw->settings->shub_settings.aux_sens;
+	/* do not overwrite aux_sens */
+	if (slv_addr + 2 == aux_sens->addr)
+		slv_config = ST_LSM6DSX_SHIFT_VAL(3, aux_sens->mask);
+
+	config[0] = (sensor->ext_info.addr << 1) | 1;
+	config[1] = addr;
+	config[2] = (len & ST_LS6DSX_READ_OP_MASK) | slv_config;
+
+	err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
+					sizeof(config));
+	if (err < 0)
+		return err;
+
+	err = st_lsm6dsx_shub_master_enable(sensor, true);
+	if (err < 0)
+		return err;
+
+	st_lsm6dsx_shub_wait_complete(hw);
+
+	err = st_lsm6dsx_shub_read_output(hw, data,
+					  len & ST_LS6DSX_READ_OP_MASK);
+	if (err < 0)
+		return err;
+
+	st_lsm6dsx_shub_master_enable(sensor, false);
+
+	config[0] = hub_settings->pause;
+	config[1] = 0;
+	config[2] = slv_config;
+	return st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
+					 sizeof(config));
+}
+
+/*
+ * st_lsm6dsx_shub_write - write data to slave device register
+ *
+ * Write data from slave device register. SLV0 is used for
+ * one-shot write operation
+ */
+static int
+st_lsm6dsx_shub_write(struct st_lsm6dsx_sensor *sensor, u8 addr,
+		      u8 *data, int len)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	u8 config[2], slv_addr;
+	int err, i;
+
+	hub_settings = &hw->settings->shub_settings;
+	if (hub_settings->wr_once.addr) {
+		unsigned int data;
+
+		data = ST_LSM6DSX_SHIFT_VAL(1, hub_settings->wr_once.mask);
+		err = st_lsm6dsx_shub_write_reg_with_mask(hw,
+			hub_settings->wr_once.addr,
+			hub_settings->wr_once.mask,
+			data);
+		if (err < 0)
+			return err;
+	}
+
+	slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr);
+	config[0] = sensor->ext_info.addr << 1;
+	for (i = 0 ; i < len; i++) {
+		config[1] = addr + i;
+
+		err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
+						sizeof(config));
+		if (err < 0)
+			return err;
+
+		err = st_lsm6dsx_shub_write_reg(hw, hub_settings->dw_slv0_addr,
+						&data[i], 1);
+		if (err < 0)
+			return err;
+
+		err = st_lsm6dsx_shub_master_enable(sensor, true);
+		if (err < 0)
+			return err;
+
+		st_lsm6dsx_shub_wait_complete(hw);
+
+		st_lsm6dsx_shub_master_enable(sensor, false);
+	}
+
+	config[0] = hub_settings->pause;
+	config[1] = 0;
+	return st_lsm6dsx_shub_write_reg(hw, slv_addr, config, sizeof(config));
+}
+
+static int
+st_lsm6dsx_shub_write_with_mask(struct st_lsm6dsx_sensor *sensor,
+				u8 addr, u8 mask, u8 val)
+{
+	int err;
+	u8 data;
+
+	err = st_lsm6dsx_shub_read(sensor, addr, &data, sizeof(data));
+	if (err < 0)
+		return err;
+
+	data = ((data & ~mask) | (val << __ffs(mask) & mask));
+
+	return st_lsm6dsx_shub_write(sensor, addr, &data, sizeof(data));
+}
+
+static int
+st_lsm6dsx_shub_get_odr_val(struct st_lsm6dsx_sensor *sensor,
+			    u32 odr, u16 *val)
+{
+	const struct st_lsm6dsx_ext_dev_settings *settings;
+	int i;
+
+	settings = sensor->ext_info.settings;
+	for (i = 0; i < settings->odr_table.odr_len; i++) {
+		if (settings->odr_table.odr_avl[i].milli_hz == odr)
+			break;
+	}
+
+	if (i == settings->odr_table.odr_len)
+		return -EINVAL;
+
+	*val = settings->odr_table.odr_avl[i].val;
+	return 0;
+}
+
+static int
+st_lsm6dsx_shub_set_odr(struct st_lsm6dsx_sensor *sensor, u32 odr)
+{
+	const struct st_lsm6dsx_ext_dev_settings *settings;
+	u16 val;
+	int err;
+
+	err = st_lsm6dsx_shub_get_odr_val(sensor, odr, &val);
+	if (err < 0)
+		return err;
+
+	settings = sensor->ext_info.settings;
+	return st_lsm6dsx_shub_write_with_mask(sensor,
+					       settings->odr_table.reg.addr,
+					       settings->odr_table.reg.mask,
+					       val);
+}
+
+/* use SLV{1,2,3} for FIFO read operations */
+static int
+st_lsm6dsx_shub_config_channels(struct st_lsm6dsx_sensor *sensor,
+				bool enable)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	const struct st_lsm6dsx_ext_dev_settings *settings;
+	u8 config[9] = {}, enable_mask, slv_addr;
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	struct st_lsm6dsx_sensor *cur_sensor;
+	int i, j = 0;
+
+	hub_settings = &hw->settings->shub_settings;
+	if (enable)
+		enable_mask = hw->enable_mask | BIT(sensor->id);
+	else
+		enable_mask = hw->enable_mask & ~BIT(sensor->id);
+
+	for (i = ST_LSM6DSX_ID_EXT0; i <= ST_LSM6DSX_ID_EXT2; i++) {
+		if (!hw->iio_devs[i])
+			continue;
+
+		cur_sensor = iio_priv(hw->iio_devs[i]);
+		if (!(enable_mask & BIT(cur_sensor->id)))
+			continue;
+
+		settings = cur_sensor->ext_info.settings;
+		config[j] = (sensor->ext_info.addr << 1) | 1;
+		config[j + 1] = settings->out.addr;
+		config[j + 2] = (settings->out.len & ST_LS6DSX_READ_OP_MASK) |
+				hub_settings->batch_en;
+		j += 3;
+	}
+
+	slv_addr = ST_LSM6DSX_SLV_ADDR(1, hub_settings->slv0_addr);
+	return st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
+					 sizeof(config));
+}
+
+int st_lsm6dsx_shub_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable)
+{
+	const struct st_lsm6dsx_ext_dev_settings *settings;
+	int err;
+
+	err = st_lsm6dsx_shub_config_channels(sensor, enable);
+	if (err < 0)
+		return err;
+
+	settings = sensor->ext_info.settings;
+	if (enable) {
+		err = st_lsm6dsx_shub_set_odr(sensor,
+					      sensor->ext_info.slv_odr);
+		if (err < 0)
+			return err;
+	} else {
+		err = st_lsm6dsx_shub_write_with_mask(sensor,
+					settings->odr_table.reg.addr,
+					settings->odr_table.reg.mask, 0);
+		if (err < 0)
+			return err;
+	}
+
+	if (settings->pwr_table.reg.addr) {
+		u8 val;
+
+		val = enable ? settings->pwr_table.on_val
+			     : settings->pwr_table.off_val;
+		err = st_lsm6dsx_shub_write_with_mask(sensor,
+					settings->pwr_table.reg.addr,
+					settings->pwr_table.reg.mask, val);
+		if (err < 0)
+			return err;
+	}
+
+	return st_lsm6dsx_shub_master_enable(sensor, enable);
+}
+
+static int
+st_lsm6dsx_shub_read_oneshot(struct st_lsm6dsx_sensor *sensor,
+			     struct iio_chan_spec const *ch,
+			     int *val)
+{
+	int err, delay, len;
+	u8 data[4];
+
+	err = st_lsm6dsx_shub_set_enable(sensor, true);
+	if (err < 0)
+		return err;
+
+	delay = 1000000000 / sensor->ext_info.slv_odr;
+	usleep_range(delay, 2 * delay);
+
+	len = min_t(int, sizeof(data), ch->scan_type.realbits >> 3);
+	err = st_lsm6dsx_shub_read(sensor, ch->address, data, len);
+	if (err < 0)
+		return err;
+
+	err = st_lsm6dsx_shub_set_enable(sensor, false);
+	if (err < 0)
+		return err;
+
+	switch (len) {
+	case 2:
+		*val = (s16)le16_to_cpu(*((__le16 *)data));
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return IIO_VAL_INT;
+}
+
+static int
+st_lsm6dsx_shub_read_raw(struct iio_dev *iio_dev,
+			 struct iio_chan_spec const *ch,
+			 int *val, int *val2, long mask)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(iio_dev);
+		if (ret)
+			break;
+
+		ret = st_lsm6dsx_shub_read_oneshot(sensor, ch, val);
+		iio_device_release_direct_mode(iio_dev);
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = sensor->ext_info.slv_odr / 1000;
+		*val2 = (sensor->ext_info.slv_odr % 1000) * 1000;
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = sensor->gain;
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static int
+st_lsm6dsx_shub_set_full_scale(struct st_lsm6dsx_sensor *sensor,
+			       u32 gain)
+{
+	const struct st_lsm6dsx_fs_table_entry *fs_table;
+	int i, err;
+
+	fs_table = &sensor->ext_info.settings->fs_table;
+	if (!fs_table->reg.addr)
+		return -ENOTSUPP;
+
+	for (i = 0; i < fs_table->fs_len; i++) {
+		if (fs_table->fs_avl[i].gain == gain)
+			break;
+	}
+
+	if (i == fs_table->fs_len)
+		return -EINVAL;
+
+	err = st_lsm6dsx_shub_write_with_mask(sensor, fs_table->reg.addr,
+					      fs_table->reg.mask,
+					      fs_table->fs_avl[i].val);
+	if (err < 0)
+		return err;
+
+	sensor->gain = gain;
+
+	return 0;
+}
+
+static int
+st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev,
+			  struct iio_chan_spec const *chan,
+			  int val, int val2, long mask)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	int err;
+
+	err = iio_device_claim_direct_mode(iio_dev);
+	if (err)
+		return err;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ: {
+		u16 data;
+
+		val = val * 1000 + val2 / 1000;
+		err = st_lsm6dsx_shub_get_odr_val(sensor, val, &data);
+		if (!err) {
+			struct st_lsm6dsx_hw *hw = sensor->hw;
+			struct st_lsm6dsx_sensor *ref_sensor;
+			u8 odr_val;
+			int odr;
+
+			ref_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
+			odr = st_lsm6dsx_check_odr(ref_sensor, val, &odr_val);
+			if (odr < 0) {
+				err = odr;
+				goto release;
+			}
+
+			sensor->ext_info.slv_odr = val;
+			sensor->odr = odr;
+		}
+		break;
+	}
+	case IIO_CHAN_INFO_SCALE:
+		err = st_lsm6dsx_shub_set_full_scale(sensor, val2);
+		break;
+	default:
+		err = -EINVAL;
+		break;
+	}
+
+release:
+	iio_device_release_direct_mode(iio_dev);
+
+	return err;
+}
+
+static ssize_t
+st_lsm6dsx_shub_sampling_freq_avail(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
+	const struct st_lsm6dsx_ext_dev_settings *settings;
+	int i, len = 0;
+
+	settings = sensor->ext_info.settings;
+	for (i = 0; i < settings->odr_table.odr_len; i++) {
+		u32 val = settings->odr_table.odr_avl[i].milli_hz;
+
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%03d ",
+				 val / 1000, val % 1000);
+	}
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static ssize_t st_lsm6dsx_shub_scale_avail(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
+	const struct st_lsm6dsx_ext_dev_settings *settings;
+	int i, len = 0;
+
+	settings = sensor->ext_info.settings;
+	for (i = 0; i < settings->fs_table.fs_len; i++)
+		len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
+				 settings->fs_table.fs_avl[i].gain);
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(st_lsm6dsx_shub_sampling_freq_avail);
+static IIO_DEVICE_ATTR(in_scale_available, 0444,
+		       st_lsm6dsx_shub_scale_avail, NULL, 0);
+static struct attribute *st_lsm6dsx_ext_attributes[] = {
+	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_dev_attr_in_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group st_lsm6dsx_ext_attribute_group = {
+	.attrs = st_lsm6dsx_ext_attributes,
+};
+
+static const struct iio_info st_lsm6dsx_ext_info = {
+	.attrs = &st_lsm6dsx_ext_attribute_group,
+	.read_raw = st_lsm6dsx_shub_read_raw,
+	.write_raw = st_lsm6dsx_shub_write_raw,
+	.hwfifo_set_watermark = st_lsm6dsx_set_watermark,
+};
+
+static struct iio_dev *
+st_lsm6dsx_shub_alloc_iiodev(struct st_lsm6dsx_hw *hw,
+			     enum st_lsm6dsx_sensor_id id,
+			     const struct st_lsm6dsx_ext_dev_settings *info,
+			     u8 i2c_addr, const char *name)
+{
+	enum st_lsm6dsx_sensor_id ref_id = ST_LSM6DSX_ID_ACC;
+	struct iio_chan_spec *ext_channels;
+	struct st_lsm6dsx_sensor *sensor;
+	struct iio_dev *iio_dev;
+
+	iio_dev = devm_iio_device_alloc(hw->dev, sizeof(*sensor));
+	if (!iio_dev)
+		return NULL;
+
+	iio_dev->modes = INDIO_DIRECT_MODE;
+	iio_dev->info = &st_lsm6dsx_ext_info;
+
+	sensor = iio_priv(iio_dev);
+	sensor->id = id;
+	sensor->hw = hw;
+	sensor->odr = hw->settings->odr_table[ref_id].odr_avl[0].milli_hz;
+	sensor->ext_info.slv_odr = info->odr_table.odr_avl[0].milli_hz;
+	sensor->gain = info->fs_table.fs_avl[0].gain;
+	sensor->ext_info.settings = info;
+	sensor->ext_info.addr = i2c_addr;
+	sensor->watermark = 1;
+
+	switch (info->id) {
+	case ST_LSM6DSX_ID_MAGN: {
+		const struct iio_chan_spec magn_channels[] = {
+			ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr,
+					   IIO_MOD_X, 0),
+			ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr + 2,
+					   IIO_MOD_Y, 1),
+			ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr + 4,
+					   IIO_MOD_Z, 2),
+			IIO_CHAN_SOFT_TIMESTAMP(3),
+		};
+
+		ext_channels = devm_kzalloc(hw->dev, sizeof(magn_channels),
+					    GFP_KERNEL);
+		if (!ext_channels)
+			return NULL;
+
+		memcpy(ext_channels, magn_channels, sizeof(magn_channels));
+		iio_dev->available_scan_masks = st_lsm6dsx_available_scan_masks;
+		iio_dev->channels = ext_channels;
+		iio_dev->num_channels = ARRAY_SIZE(magn_channels);
+
+		scnprintf(sensor->name, sizeof(sensor->name), "%s_magn",
+			  name);
+		break;
+	}
+	default:
+		return NULL;
+	}
+	iio_dev->name = sensor->name;
+
+	return iio_dev;
+}
+
+static int st_lsm6dsx_shub_init_device(struct st_lsm6dsx_sensor *sensor)
+{
+	const struct st_lsm6dsx_ext_dev_settings *settings;
+	int err;
+
+	settings = sensor->ext_info.settings;
+	if (settings->bdu.addr) {
+		err = st_lsm6dsx_shub_write_with_mask(sensor,
+						      settings->bdu.addr,
+						      settings->bdu.mask, 1);
+		if (err < 0)
+			return err;
+	}
+
+	if (settings->temp_comp.addr) {
+		err = st_lsm6dsx_shub_write_with_mask(sensor,
+					settings->temp_comp.addr,
+					settings->temp_comp.mask, 1);
+		if (err < 0)
+			return err;
+	}
+
+	if (settings->off_canc.addr) {
+		err = st_lsm6dsx_shub_write_with_mask(sensor,
+					settings->off_canc.addr,
+					settings->off_canc.mask, 1);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+static int
+st_lsm6dsx_shub_check_wai(struct st_lsm6dsx_hw *hw, u8 *i2c_addr,
+			  const struct st_lsm6dsx_ext_dev_settings *settings)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	u8 config[3], data, slv_addr, slv_config = 0;
+	const struct st_lsm6dsx_reg *aux_sens;
+	struct st_lsm6dsx_sensor *sensor;
+	bool found = false;
+	int i, err;
+
+	sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
+	hub_settings = &hw->settings->shub_settings;
+	aux_sens = &hw->settings->shub_settings.aux_sens;
+	slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr);
+	/* do not overwrite aux_sens */
+	if (slv_addr + 2 == aux_sens->addr)
+		slv_config = ST_LSM6DSX_SHIFT_VAL(3, aux_sens->mask);
+
+	for (i = 0; i < ARRAY_SIZE(settings->i2c_addr); i++) {
+		if (!settings->i2c_addr[i])
+			continue;
+
+		/* read wai slave register */
+		config[0] = (settings->i2c_addr[i] << 1) | 0x1;
+		config[1] = settings->wai.addr;
+		config[2] = 0x1 | slv_config;
+
+		err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
+						sizeof(config));
+		if (err < 0)
+			return err;
+
+		err = st_lsm6dsx_shub_master_enable(sensor, true);
+		if (err < 0)
+			return err;
+
+		st_lsm6dsx_shub_wait_complete(hw);
+
+		err = st_lsm6dsx_shub_read_output(hw, &data, sizeof(data));
+
+		st_lsm6dsx_shub_master_enable(sensor, false);
+
+		if (err < 0)
+			return err;
+
+		if (data != settings->wai.val)
+			continue;
+
+		*i2c_addr = settings->i2c_addr[i];
+		found = true;
+		break;
+	}
+
+	/* reset SLV0 channel */
+	config[0] = hub_settings->pause;
+	config[1] = 0;
+	config[2] = slv_config;
+	err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
+					sizeof(config));
+	if (err < 0)
+		return err;
+
+	return found ? 0 : -ENODEV;
+}
+
+int st_lsm6dsx_shub_probe(struct st_lsm6dsx_hw *hw, const char *name)
+{
+	enum st_lsm6dsx_sensor_id id = ST_LSM6DSX_ID_EXT0;
+	struct st_lsm6dsx_sensor *sensor;
+	int err, i, num_ext_dev = 0;
+	u8 i2c_addr = 0;
+
+	for (i = 0; i < ARRAY_SIZE(st_lsm6dsx_ext_dev_table); i++) {
+		err = st_lsm6dsx_shub_check_wai(hw, &i2c_addr,
+					&st_lsm6dsx_ext_dev_table[i]);
+		if (err == -ENODEV)
+			continue;
+		else if (err < 0)
+			return err;
+
+		hw->iio_devs[id] = st_lsm6dsx_shub_alloc_iiodev(hw, id,
+						&st_lsm6dsx_ext_dev_table[i],
+						i2c_addr, name);
+		if (!hw->iio_devs[id])
+			return -ENOMEM;
+
+		sensor = iio_priv(hw->iio_devs[id]);
+		err = st_lsm6dsx_shub_init_device(sensor);
+		if (err < 0)
+			return err;
+
+		if (++num_ext_dev >= hw->settings->shub_settings.num_ext_dev)
+			break;
+		id++;
+	}
+
+	return 0;
+}