Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 329 insertions, 0 deletions

diff --git a/drivers/iio/light/cm3605.c b/drivers/iio/light/cm3605.c
new file mode 100644
index 000000000..0b30db77f
--- /dev/null
+++ b/drivers/iio/light/cm3605.c
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * CM3605 Ambient Light and Proximity Sensor
+ *
+ * Copyright (C) 2016 Linaro Ltd.
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This hardware was found in the very first Nexus One handset from Google/HTC
+ * and an early endavour into mobile light and proximity sensors.
+ */
+
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/consumer.h> /* To get our ADC channel */
+#include <linux/iio/types.h> /* To deal with our ADC channel */
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/math64.h>
+#include <linux/pm.h>
+
+#define CM3605_PROX_CHANNEL 0
+#define CM3605_ALS_CHANNEL 1
+#define CM3605_AOUT_TYP_MAX_MV 1550
+/* It should not go above 1.650V according to the data sheet */
+#define CM3605_AOUT_MAX_MV 1650
+
+/**
+ * struct cm3605 - CM3605 state
+ * @dev: pointer to parent device
+ * @vdd: regulator controlling VDD
+ * @aset: sleep enable GPIO, high = sleep
+ * @aout: IIO ADC channel to convert the AOUT signal
+ * @als_max: maximum LUX detection (depends on RSET)
+ * @dir: proximity direction: start as FALLING
+ * @led: trigger for the infrared LED used by the proximity sensor
+ */
+struct cm3605 {
+	struct device *dev;
+	struct regulator *vdd;
+	struct gpio_desc *aset;
+	struct iio_channel *aout;
+	s32 als_max;
+	enum iio_event_direction dir;
+	struct led_trigger *led;
+};
+
+static irqreturn_t cm3605_prox_irq(int irq, void *d)
+{
+	struct iio_dev *indio_dev = d;
+	struct cm3605 *cm3605 = iio_priv(indio_dev);
+	u64 ev;
+
+	ev = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, CM3605_PROX_CHANNEL,
+				  IIO_EV_TYPE_THRESH, cm3605->dir);
+	iio_push_event(indio_dev, ev, iio_get_time_ns(indio_dev));
+
+	/* Invert the edge for each event */
+	if (cm3605->dir == IIO_EV_DIR_RISING)
+		cm3605->dir = IIO_EV_DIR_FALLING;
+	else
+		cm3605->dir = IIO_EV_DIR_RISING;
+
+	return IRQ_HANDLED;
+}
+
+static int cm3605_get_lux(struct cm3605 *cm3605)
+{
+	int ret, res;
+	s64 lux;
+
+	ret = iio_read_channel_processed(cm3605->aout, &res);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(cm3605->dev, "read %d mV from ADC\n", res);
+
+	/*
+	 * AOUT has an offset of ~30mV then linear at dark
+	 * then goes from 2.54 up to 650 LUX yielding 1.55V
+	 * (1550 mV) so scale the returned value to this interval
+	 * using simple linear interpolation.
+	 */
+	if (res < 30)
+		return 0;
+	if (res > CM3605_AOUT_MAX_MV)
+		dev_err(cm3605->dev, "device out of range\n");
+
+	/* Remove bias */
+	lux = res - 30;
+
+	/* Linear interpolation between 0 and ALS typ max */
+	lux *= cm3605->als_max;
+	lux = div64_s64(lux, CM3605_AOUT_TYP_MAX_MV);
+
+	return lux;
+}
+
+static int cm3605_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	struct cm3605 *cm3605 = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_LIGHT:
+			ret = cm3605_get_lux(cm3605);
+			if (ret < 0)
+				return ret;
+			*val = ret;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info cm3605_info = {
+	.read_raw = cm3605_read_raw,
+};
+
+static const struct iio_event_spec cm3605_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_chan_spec cm3605_channels[] = {
+	{
+		.type = IIO_PROXIMITY,
+		.event_spec = cm3605_events,
+		.num_event_specs = ARRAY_SIZE(cm3605_events),
+	},
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.channel = CM3605_ALS_CHANNEL,
+	},
+};
+
+static int cm3605_probe(struct platform_device *pdev)
+{
+	struct cm3605 *cm3605;
+	struct iio_dev *indio_dev;
+	struct device *dev = &pdev->dev;
+	enum iio_chan_type ch_type;
+	u32 rset;
+	int irq;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*cm3605));
+	if (!indio_dev)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, indio_dev);
+
+	cm3605 = iio_priv(indio_dev);
+	cm3605->dev = dev;
+	cm3605->dir = IIO_EV_DIR_FALLING;
+
+	ret = device_property_read_u32(dev, "capella,aset-resistance-ohms", &rset);
+	if (ret) {
+		dev_info(dev, "no RSET specified, assuming 100K\n");
+		rset = 100000;
+	}
+	switch (rset) {
+	case 50000:
+		cm3605->als_max = 650;
+		break;
+	case 100000:
+		cm3605->als_max = 300;
+		break;
+	case 300000:
+		cm3605->als_max = 100;
+		break;
+	case 600000:
+		cm3605->als_max = 50;
+		break;
+	default:
+		dev_info(dev, "non-standard resistance\n");
+		return -EINVAL;
+	}
+
+	cm3605->aout = devm_iio_channel_get(dev, "aout");
+	if (IS_ERR(cm3605->aout)) {
+		ret = PTR_ERR(cm3605->aout);
+		ret = (ret == -ENODEV) ? -EPROBE_DEFER : ret;
+		return dev_err_probe(dev, ret, "failed to get AOUT ADC channel\n");
+	}
+	ret = iio_get_channel_type(cm3605->aout, &ch_type);
+	if (ret < 0)
+		return ret;
+	if (ch_type != IIO_VOLTAGE) {
+		dev_err(dev, "wrong type of IIO channel specified for AOUT\n");
+		return -EINVAL;
+	}
+
+	cm3605->vdd = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(cm3605->vdd))
+		return dev_err_probe(dev, PTR_ERR(cm3605->vdd),
+				     "failed to get VDD regulator\n");
+
+	ret = regulator_enable(cm3605->vdd);
+	if (ret) {
+		dev_err(dev, "failed to enable VDD regulator\n");
+		return ret;
+	}
+
+	cm3605->aset = devm_gpiod_get(dev, "aset", GPIOD_OUT_HIGH);
+	if (IS_ERR(cm3605->aset)) {
+		ret = dev_err_probe(dev, PTR_ERR(cm3605->aset), "no ASET GPIO\n");
+		goto out_disable_vdd;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = dev_err_probe(dev, irq, "failed to get irq\n");
+		goto out_disable_aset;
+	}
+
+	ret = devm_request_threaded_irq(dev, irq, cm3605_prox_irq,
+					NULL, 0, "cm3605", indio_dev);
+	if (ret) {
+		dev_err(dev, "unable to request IRQ\n");
+		goto out_disable_aset;
+	}
+
+	/* Just name the trigger the same as the driver */
+	led_trigger_register_simple("cm3605", &cm3605->led);
+	led_trigger_event(cm3605->led, LED_FULL);
+
+	indio_dev->info = &cm3605_info;
+	indio_dev->name = "cm3605";
+	indio_dev->channels = cm3605_channels;
+	indio_dev->num_channels = ARRAY_SIZE(cm3605_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto out_remove_trigger;
+	dev_info(dev, "Capella Microsystems CM3605 enabled range 0..%d LUX\n",
+		 cm3605->als_max);
+
+	return 0;
+
+out_remove_trigger:
+	led_trigger_event(cm3605->led, LED_OFF);
+	led_trigger_unregister_simple(cm3605->led);
+out_disable_aset:
+	gpiod_set_value_cansleep(cm3605->aset, 0);
+out_disable_vdd:
+	regulator_disable(cm3605->vdd);
+	return ret;
+}
+
+static int cm3605_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct cm3605 *cm3605 = iio_priv(indio_dev);
+
+	led_trigger_event(cm3605->led, LED_OFF);
+	led_trigger_unregister_simple(cm3605->led);
+	gpiod_set_value_cansleep(cm3605->aset, 0);
+	iio_device_unregister(indio_dev);
+	regulator_disable(cm3605->vdd);
+
+	return 0;
+}
+
+static int cm3605_pm_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct cm3605 *cm3605 = iio_priv(indio_dev);
+
+	led_trigger_event(cm3605->led, LED_OFF);
+	regulator_disable(cm3605->vdd);
+
+	return 0;
+}
+
+static int cm3605_pm_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct cm3605 *cm3605 = iio_priv(indio_dev);
+	int ret;
+
+	ret = regulator_enable(cm3605->vdd);
+	if (ret)
+		dev_err(dev, "failed to enable regulator in resume path\n");
+	led_trigger_event(cm3605->led, LED_FULL);
+
+	return 0;
+}
+static DEFINE_SIMPLE_DEV_PM_OPS(cm3605_dev_pm_ops, cm3605_pm_suspend,
+				cm3605_pm_resume);
+
+static const struct of_device_id cm3605_of_match[] = {
+	{.compatible = "capella,cm3605"},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, cm3605_of_match);
+
+static struct platform_driver cm3605_driver = {
+	.driver = {
+		.name = "cm3605",
+		.of_match_table = cm3605_of_match,
+		.pm = pm_sleep_ptr(&cm3605_dev_pm_ops),
+	},
+	.probe = cm3605_probe,
+	.remove = cm3605_remove,
+};
+module_platform_driver(cm3605_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("CM3605 ambient light and proximity sensor driver");
+MODULE_LICENSE("GPL");