Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 710 insertions, 0 deletions

diff --git a/drivers/iio/light/isl29028.c b/drivers/iio/light/isl29028.c
new file mode 100644
index 000000000..bcf3a556e
--- /dev/null
+++ b/drivers/iio/light/isl29028.c
@@ -0,0 +1,710 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * IIO driver for the light sensor ISL29028.
+ * ISL29028 is Concurrent Ambient Light and Proximity Sensor
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2016-2017 Brian Masney <masneyb@onstation.org>
+ *
+ * Datasheets:
+ *  - http://www.intersil.com/content/dam/Intersil/documents/isl2/isl29028.pdf
+ *  - http://www.intersil.com/content/dam/Intersil/documents/isl2/isl29030.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/pm_runtime.h>
+
+#define ISL29028_CONV_TIME_MS			100
+
+#define ISL29028_REG_CONFIGURE			0x01
+
+#define ISL29028_CONF_ALS_IR_MODE_ALS		0
+#define ISL29028_CONF_ALS_IR_MODE_IR		BIT(0)
+#define ISL29028_CONF_ALS_IR_MODE_MASK		BIT(0)
+
+#define ISL29028_CONF_ALS_RANGE_LOW_LUX		0
+#define ISL29028_CONF_ALS_RANGE_HIGH_LUX	BIT(1)
+#define ISL29028_CONF_ALS_RANGE_MASK		BIT(1)
+
+#define ISL29028_CONF_ALS_DIS			0
+#define ISL29028_CONF_ALS_EN			BIT(2)
+#define ISL29028_CONF_ALS_EN_MASK		BIT(2)
+
+#define ISL29028_CONF_PROX_SLP_SH		4
+#define ISL29028_CONF_PROX_SLP_MASK		(7 << ISL29028_CONF_PROX_SLP_SH)
+
+#define ISL29028_CONF_PROX_EN			BIT(7)
+#define ISL29028_CONF_PROX_EN_MASK		BIT(7)
+
+#define ISL29028_REG_INTERRUPT			0x02
+
+#define ISL29028_REG_PROX_DATA			0x08
+#define ISL29028_REG_ALSIR_L			0x09
+#define ISL29028_REG_ALSIR_U			0x0A
+
+#define ISL29028_REG_TEST1_MODE			0x0E
+#define ISL29028_REG_TEST2_MODE			0x0F
+
+#define ISL29028_NUM_REGS			(ISL29028_REG_TEST2_MODE + 1)
+
+#define ISL29028_POWER_OFF_DELAY_MS		2000
+
+struct isl29028_prox_data {
+	int sampling_int;
+	int sampling_fract;
+	int sleep_time;
+};
+
+static const struct isl29028_prox_data isl29028_prox_data[] = {
+	{   1, 250000, 800 },
+	{   2, 500000, 400 },
+	{   5,      0, 200 },
+	{  10,      0, 100 },
+	{  13, 300000,  75 },
+	{  20,      0,  50 },
+	{  80,      0,  13 }, /*
+			       * Note: Data sheet lists 12.5 ms sleep time.
+			       * Round up a half millisecond for msleep().
+			       */
+	{ 100,  0,   0 }
+};
+
+enum isl29028_als_ir_mode {
+	ISL29028_MODE_NONE = 0,
+	ISL29028_MODE_ALS,
+	ISL29028_MODE_IR,
+};
+
+struct isl29028_chip {
+	struct mutex			lock;
+	struct regmap			*regmap;
+	int				prox_sampling_int;
+	int				prox_sampling_frac;
+	bool				enable_prox;
+	int				lux_scale;
+	enum isl29028_als_ir_mode	als_ir_mode;
+};
+
+static int isl29028_find_prox_sleep_index(int sampling_int, int sampling_fract)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(isl29028_prox_data); ++i) {
+		if (isl29028_prox_data[i].sampling_int == sampling_int &&
+		    isl29028_prox_data[i].sampling_fract == sampling_fract)
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static int isl29028_set_proxim_sampling(struct isl29028_chip *chip,
+					int sampling_int, int sampling_fract)
+{
+	struct device *dev = regmap_get_device(chip->regmap);
+	int sleep_index, ret;
+
+	sleep_index = isl29028_find_prox_sleep_index(sampling_int,
+						     sampling_fract);
+	if (sleep_index < 0)
+		return sleep_index;
+
+	ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+				 ISL29028_CONF_PROX_SLP_MASK,
+				 sleep_index << ISL29028_CONF_PROX_SLP_SH);
+
+	if (ret < 0) {
+		dev_err(dev, "%s(): Error %d setting the proximity sampling\n",
+			__func__, ret);
+		return ret;
+	}
+
+	chip->prox_sampling_int = sampling_int;
+	chip->prox_sampling_frac = sampling_fract;
+
+	return ret;
+}
+
+static int isl29028_enable_proximity(struct isl29028_chip *chip)
+{
+	int prox_index, ret;
+
+	ret = isl29028_set_proxim_sampling(chip, chip->prox_sampling_int,
+					   chip->prox_sampling_frac);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+				 ISL29028_CONF_PROX_EN_MASK,
+				 ISL29028_CONF_PROX_EN);
+	if (ret < 0)
+		return ret;
+
+	/* Wait for conversion to be complete for first sample */
+	prox_index = isl29028_find_prox_sleep_index(chip->prox_sampling_int,
+						    chip->prox_sampling_frac);
+	if (prox_index < 0)
+		return prox_index;
+
+	msleep(isl29028_prox_data[prox_index].sleep_time);
+
+	return 0;
+}
+
+static int isl29028_set_als_scale(struct isl29028_chip *chip, int lux_scale)
+{
+	struct device *dev = regmap_get_device(chip->regmap);
+	int val = (lux_scale == 2000) ? ISL29028_CONF_ALS_RANGE_HIGH_LUX :
+					ISL29028_CONF_ALS_RANGE_LOW_LUX;
+	int ret;
+
+	ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+				 ISL29028_CONF_ALS_RANGE_MASK, val);
+	if (ret < 0) {
+		dev_err(dev, "%s(): Error %d setting the ALS scale\n", __func__,
+			ret);
+		return ret;
+	}
+
+	chip->lux_scale = lux_scale;
+
+	return ret;
+}
+
+static int isl29028_set_als_ir_mode(struct isl29028_chip *chip,
+				    enum isl29028_als_ir_mode mode)
+{
+	int ret;
+
+	if (chip->als_ir_mode == mode)
+		return 0;
+
+	ret = isl29028_set_als_scale(chip, chip->lux_scale);
+	if (ret < 0)
+		return ret;
+
+	switch (mode) {
+	case ISL29028_MODE_ALS:
+		ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+					 ISL29028_CONF_ALS_IR_MODE_MASK,
+					 ISL29028_CONF_ALS_IR_MODE_ALS);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+					 ISL29028_CONF_ALS_RANGE_MASK,
+					 ISL29028_CONF_ALS_RANGE_HIGH_LUX);
+		break;
+	case ISL29028_MODE_IR:
+		ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+					 ISL29028_CONF_ALS_IR_MODE_MASK,
+					 ISL29028_CONF_ALS_IR_MODE_IR);
+		break;
+	case ISL29028_MODE_NONE:
+		return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+					  ISL29028_CONF_ALS_EN_MASK,
+					  ISL29028_CONF_ALS_DIS);
+	}
+
+	if (ret < 0)
+		return ret;
+
+	/* Enable the ALS/IR */
+	ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+				 ISL29028_CONF_ALS_EN_MASK,
+				 ISL29028_CONF_ALS_EN);
+	if (ret < 0)
+		return ret;
+
+	/* Need to wait for conversion time if ALS/IR mode enabled */
+	msleep(ISL29028_CONV_TIME_MS);
+
+	chip->als_ir_mode = mode;
+
+	return 0;
+}
+
+static int isl29028_read_als_ir(struct isl29028_chip *chip, int *als_ir)
+{
+	struct device *dev = regmap_get_device(chip->regmap);
+	unsigned int lsb;
+	unsigned int msb;
+	int ret;
+
+	ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_L, &lsb);
+	if (ret < 0) {
+		dev_err(dev,
+			"%s(): Error %d reading register ALSIR_L\n",
+			__func__, ret);
+		return ret;
+	}
+
+	ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_U, &msb);
+	if (ret < 0) {
+		dev_err(dev,
+			"%s(): Error %d reading register ALSIR_U\n",
+			__func__, ret);
+		return ret;
+	}
+
+	*als_ir = ((msb & 0xF) << 8) | (lsb & 0xFF);
+
+	return 0;
+}
+
+static int isl29028_read_proxim(struct isl29028_chip *chip, int *prox)
+{
+	struct device *dev = regmap_get_device(chip->regmap);
+	unsigned int data;
+	int ret;
+
+	if (!chip->enable_prox) {
+		ret = isl29028_enable_proximity(chip);
+		if (ret < 0)
+			return ret;
+
+		chip->enable_prox = true;
+	}
+
+	ret = regmap_read(chip->regmap, ISL29028_REG_PROX_DATA, &data);
+	if (ret < 0) {
+		dev_err(dev, "%s(): Error %d reading register PROX_DATA\n",
+			__func__, ret);
+		return ret;
+	}
+
+	*prox = data;
+
+	return 0;
+}
+
+static int isl29028_als_get(struct isl29028_chip *chip, int *als_data)
+{
+	struct device *dev = regmap_get_device(chip->regmap);
+	int ret;
+	int als_ir_data;
+
+	ret = isl29028_set_als_ir_mode(chip, ISL29028_MODE_ALS);
+	if (ret < 0) {
+		dev_err(dev, "%s(): Error %d enabling ALS mode\n", __func__,
+			ret);
+		return ret;
+	}
+
+	ret = isl29028_read_als_ir(chip, &als_ir_data);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * convert als data count to lux.
+	 * if lux_scale = 125,  lux = count * 0.031
+	 * if lux_scale = 2000, lux = count * 0.49
+	 */
+	if (chip->lux_scale == 125)
+		als_ir_data = (als_ir_data * 31) / 1000;
+	else
+		als_ir_data = (als_ir_data * 49) / 100;
+
+	*als_data = als_ir_data;
+
+	return 0;
+}
+
+static int isl29028_ir_get(struct isl29028_chip *chip, int *ir_data)
+{
+	struct device *dev = regmap_get_device(chip->regmap);
+	int ret;
+
+	ret = isl29028_set_als_ir_mode(chip, ISL29028_MODE_IR);
+	if (ret < 0) {
+		dev_err(dev, "%s(): Error %d enabling IR mode\n", __func__,
+			ret);
+		return ret;
+	}
+
+	return isl29028_read_als_ir(chip, ir_data);
+}
+
+static int isl29028_set_pm_runtime_busy(struct isl29028_chip *chip, bool on)
+{
+	struct device *dev = regmap_get_device(chip->regmap);
+	int ret;
+
+	if (on) {
+		ret = pm_runtime_resume_and_get(dev);
+	} else {
+		pm_runtime_mark_last_busy(dev);
+		ret = pm_runtime_put_autosuspend(dev);
+	}
+
+	return ret;
+}
+
+/* Channel IO */
+static int isl29028_write_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int val, int val2, long mask)
+{
+	struct isl29028_chip *chip = iio_priv(indio_dev);
+	struct device *dev = regmap_get_device(chip->regmap);
+	int ret;
+
+	ret = isl29028_set_pm_runtime_busy(chip, true);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&chip->lock);
+
+	ret = -EINVAL;
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		if (mask != IIO_CHAN_INFO_SAMP_FREQ) {
+			dev_err(dev,
+				"%s(): proximity: Mask value 0x%08lx is not supported\n",
+				__func__, mask);
+			break;
+		}
+
+		if (val < 1 || val > 100) {
+			dev_err(dev,
+				"%s(): proximity: Sampling frequency %d is not in the range [1:100]\n",
+				__func__, val);
+			break;
+		}
+
+		ret = isl29028_set_proxim_sampling(chip, val, val2);
+		break;
+	case IIO_LIGHT:
+		if (mask != IIO_CHAN_INFO_SCALE) {
+			dev_err(dev,
+				"%s(): light: Mask value 0x%08lx is not supported\n",
+				__func__, mask);
+			break;
+		}
+
+		if (val != 125 && val != 2000) {
+			dev_err(dev,
+				"%s(): light: Lux scale %d is not in the set {125, 2000}\n",
+				__func__, val);
+			break;
+		}
+
+		ret = isl29028_set_als_scale(chip, val);
+		break;
+	default:
+		dev_err(dev, "%s(): Unsupported channel type %x\n",
+			__func__, chan->type);
+		break;
+	}
+
+	mutex_unlock(&chip->lock);
+
+	if (ret < 0)
+		return ret;
+
+	ret = isl29028_set_pm_runtime_busy(chip, false);
+	if (ret < 0)
+		return ret;
+
+	return ret;
+}
+
+static int isl29028_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
+{
+	struct isl29028_chip *chip = iio_priv(indio_dev);
+	struct device *dev = regmap_get_device(chip->regmap);
+	int ret, pm_ret;
+
+	ret = isl29028_set_pm_runtime_busy(chip, true);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&chip->lock);
+
+	ret = -EINVAL;
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (chan->type) {
+		case IIO_LIGHT:
+			ret = isl29028_als_get(chip, val);
+			break;
+		case IIO_INTENSITY:
+			ret = isl29028_ir_get(chip, val);
+			break;
+		case IIO_PROXIMITY:
+			ret = isl29028_read_proxim(chip, val);
+			break;
+		default:
+			break;
+		}
+
+		if (ret < 0)
+			break;
+
+		ret = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (chan->type != IIO_PROXIMITY)
+			break;
+
+		*val = chip->prox_sampling_int;
+		*val2 = chip->prox_sampling_frac;
+		ret = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		if (chan->type != IIO_LIGHT)
+			break;
+		*val = chip->lux_scale;
+		ret = IIO_VAL_INT;
+		break;
+	default:
+		dev_err(dev, "%s(): mask value 0x%08lx is not supported\n",
+			__func__, mask);
+		break;
+	}
+
+	mutex_unlock(&chip->lock);
+
+	if (ret < 0)
+		return ret;
+
+	/**
+	 * Preserve the ret variable if the call to
+	 * isl29028_set_pm_runtime_busy() is successful so the reading
+	 * (if applicable) is returned to user space.
+	 */
+	pm_ret = isl29028_set_pm_runtime_busy(chip, false);
+	if (pm_ret < 0)
+		return pm_ret;
+
+	return ret;
+}
+
+static IIO_CONST_ATTR(in_proximity_sampling_frequency_available,
+				"1.25 2.5 5 10 13.3 20 80 100");
+static IIO_CONST_ATTR(in_illuminance_scale_available, "125 2000");
+
+#define ISL29028_CONST_ATTR(name) (&iio_const_attr_##name.dev_attr.attr)
+static struct attribute *isl29028_attributes[] = {
+	ISL29028_CONST_ATTR(in_proximity_sampling_frequency_available),
+	ISL29028_CONST_ATTR(in_illuminance_scale_available),
+	NULL,
+};
+
+static const struct attribute_group isl29108_group = {
+	.attrs = isl29028_attributes,
+};
+
+static const struct iio_chan_spec isl29028_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+		BIT(IIO_CHAN_INFO_SCALE),
+	}, {
+		.type = IIO_INTENSITY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+	}, {
+		.type = IIO_PROXIMITY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		BIT(IIO_CHAN_INFO_SAMP_FREQ),
+	}
+};
+
+static const struct iio_info isl29028_info = {
+	.attrs = &isl29108_group,
+	.read_raw = isl29028_read_raw,
+	.write_raw = isl29028_write_raw,
+};
+
+static int isl29028_clear_configure_reg(struct isl29028_chip *chip)
+{
+	struct device *dev = regmap_get_device(chip->regmap);
+	int ret;
+
+	ret = regmap_write(chip->regmap, ISL29028_REG_CONFIGURE, 0x0);
+	if (ret < 0)
+		dev_err(dev, "%s(): Error %d clearing the CONFIGURE register\n",
+			__func__, ret);
+
+	chip->als_ir_mode = ISL29028_MODE_NONE;
+	chip->enable_prox = false;
+
+	return ret;
+}
+
+static bool isl29028_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ISL29028_REG_INTERRUPT:
+	case ISL29028_REG_PROX_DATA:
+	case ISL29028_REG_ALSIR_L:
+	case ISL29028_REG_ALSIR_U:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config isl29028_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_reg = isl29028_is_volatile_reg,
+	.max_register = ISL29028_NUM_REGS - 1,
+	.num_reg_defaults_raw = ISL29028_NUM_REGS,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static int isl29028_probe(struct i2c_client *client)
+{
+	const struct i2c_device_id *id = i2c_client_get_device_id(client);
+	struct isl29028_chip *chip;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	chip = iio_priv(indio_dev);
+
+	i2c_set_clientdata(client, indio_dev);
+	mutex_init(&chip->lock);
+
+	chip->regmap = devm_regmap_init_i2c(client, &isl29028_regmap_config);
+	if (IS_ERR(chip->regmap)) {
+		ret = PTR_ERR(chip->regmap);
+		dev_err(&client->dev, "%s: Error %d initializing regmap\n",
+			__func__, ret);
+		return ret;
+	}
+
+	chip->enable_prox  = false;
+	chip->prox_sampling_int = 20;
+	chip->prox_sampling_frac = 0;
+	chip->lux_scale = 2000;
+
+	ret = regmap_write(chip->regmap, ISL29028_REG_TEST1_MODE, 0x0);
+	if (ret < 0) {
+		dev_err(&client->dev,
+			"%s(): Error %d writing to TEST1_MODE register\n",
+			__func__, ret);
+		return ret;
+	}
+
+	ret = regmap_write(chip->regmap, ISL29028_REG_TEST2_MODE, 0x0);
+	if (ret < 0) {
+		dev_err(&client->dev,
+			"%s(): Error %d writing to TEST2_MODE register\n",
+			__func__, ret);
+		return ret;
+	}
+
+	ret = isl29028_clear_configure_reg(chip);
+	if (ret < 0)
+		return ret;
+
+	indio_dev->info = &isl29028_info;
+	indio_dev->channels = isl29028_channels;
+	indio_dev->num_channels = ARRAY_SIZE(isl29028_channels);
+	indio_dev->name = id->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	pm_runtime_enable(&client->dev);
+	pm_runtime_set_autosuspend_delay(&client->dev,
+					 ISL29028_POWER_OFF_DELAY_MS);
+	pm_runtime_use_autosuspend(&client->dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev,
+			"%s(): iio registration failed with error %d\n",
+			__func__, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void isl29028_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct isl29028_chip *chip = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	pm_runtime_disable(&client->dev);
+	pm_runtime_set_suspended(&client->dev);
+
+	isl29028_clear_configure_reg(chip);
+}
+
+static int isl29028_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct isl29028_chip *chip = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&chip->lock);
+
+	ret = isl29028_clear_configure_reg(chip);
+
+	mutex_unlock(&chip->lock);
+
+	return ret;
+}
+
+static int isl29028_resume(struct device *dev)
+{
+	/**
+	 * The specific component (ALS/IR or proximity) will enable itself as
+	 * needed the next time that the user requests a reading. This is done
+	 * above in isl29028_set_als_ir_mode() and isl29028_enable_proximity().
+	 */
+	return 0;
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(isl29028_pm_ops, isl29028_suspend,
+				 isl29028_resume, NULL);
+
+static const struct i2c_device_id isl29028_id[] = {
+	{"isl29028", 0},
+	{"isl29030", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, isl29028_id);
+
+static const struct of_device_id isl29028_of_match[] = {
+	{ .compatible = "isl,isl29028", }, /* for backward compat., don't use */
+	{ .compatible = "isil,isl29028", },
+	{ .compatible = "isil,isl29030", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, isl29028_of_match);
+
+static struct i2c_driver isl29028_driver = {
+	.driver  = {
+		.name = "isl29028",
+		.pm = pm_ptr(&isl29028_pm_ops),
+		.of_match_table = isl29028_of_match,
+	},
+	.probe_new = isl29028_probe,
+	.remove  = isl29028_remove,
+	.id_table = isl29028_id,
+};
+
+module_i2c_driver(isl29028_driver);
+
+MODULE_DESCRIPTION("ISL29028 Ambient Light and Proximity Sensor driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");